Recovery and refining of au by gold-cyanide ion biosorption using animal fibrous proteins

Animal fibrous proteins (AFPs) such as egg-shell membrane (ESM), chicken feather (CF), wool, silk, or elastin are an intricate network of stable and water-insoluble fibers with high surface area and are abundant bioresources. Every AFP tested was found to accumulate gold-cyanide ion from aqueous solutions in high yield, depending on pH and some other parameters. Gold-cyanide ion is adsorbed by AFP at low pH range, with maximum binding observed at approx pH 2.0. Under the certain conditions, gold-cyanide ion was accumulated up to 8.6, 7.1, 9.8, 2.4, and 3.9% of dry weight on ESM, CF, wool, silk, and elastin, respectively. In the case of ESM, it was found that ESM removed gold-cyanide ion almost quantitatively and almost all the gold uptake by ESM was easily desorbed with 0.1M NaOH. ESM can be used repeatedly for the process of gold adsorption-desorption. The gold-biosorptive capacity of ESM that was chemically modified with glutaraldehyde was higher than that of control. In column procedure, ESM packed on column removed gold-cyanide ion from the dilute aqueous solution to extremely low concentrations (nondetectable concentration of below 1 ppb)     

Preparation of gold nanoparticles on eggshell membrane and their biosensing application

A facile green biosynthesis method has been successfully developed to prepare gold nanoparticles (AuNPs) of various core sizes (25 ± 7 nm) using a natural biomaterial, eggshell membrane (ESM) at ambient conditions. In situ synthesis of AuNPs-immobilized ESM is conducted in a simple manner by immersing ESM in a pH 6.0 aqueous solution of HAuCl₄ without adding any reductant. The formation of AuNPs on ESM protein fibers is attributed to the reduction of Au(III) ions to Au(0) by the aldehyde moieties of the natural ESM fibers. Energy dispersive X-ray spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction unambiguously identify the presence of AuNPs on ESM. The effect of pH on the in situ synthesis of AuNPs on ESM has been investigated in detail. The pH of the gold precursor (HAuCl₄) solution can influence the formation rate, dispersion and size of AuNPs on ESM. At pH ≤3.0 and ≥7.0, no AuNPs are observed on ESM while small AuNPs are homogeneously dispersed on ESM at pH 4.0-6.0. The optimal pH for AuNPs formation on ESM is 6.0. AuNPs/ESMs are used to immobilize glucose oxidase (GO_x) for glucose biosensing. AuNPs on ESM can increase the enzyme activity of GO_x. The linear response range of the glucose biosensor is 20 μM to 0.80 mM glucose with a detection limit of 17 μM (S/N = 3). The biosensor has been successfully applied to determine the glucose content in commercial glucose injections. Our work provides a very simple, non-toxic, convenient, and green route to synthesize AuNPs on ESM which is potentially useful in the biosensing field.     

Biosorption of actinides from dilute waste actinide solution by egg-shell membrane

Removal of radioactive elements from the effluent and waste aqueous solutions is an important problem. In previous laboratory batch experiments, hen egg-shell membrane (ESM) was stable as an insoluble protein and was very capable of binding heavy metal ions from aqueous solution. Batch laboratory pH profile, time dependency, and capacity experiments were performed to determine the binding of uranium (U) and thorium (Th) to ESM. Batch pH profile experiments indicated that the optimum pH for binding these actinides was approx 6.0 (U) or 3.0 (Th). The adsorption isotherms were developed at pH 5.0 (U) or 3.0 (Th) at 25°C, and the adsorption equilibrium data fitted both Langmuir and Freundlich models. The maximum uptakes by the Langmuir model were about 240 mg U/g and 60 mg Th/g dry weight ESM. In addition, their adsorption capacities increased as salt concentration increased. ESM could also accumulate uranium from dilute aqueous solution by adjusting to the optimum pH. These results showed that ESM was effective for removing actinides from solution and would be useful in filtration technology to remove actinides from aqueous solution. S.-I. Ishikawa is a research fellow at the Japan Society for the Promotion of Science.     

Eggshell membrane-based solid-phase extraction combined with hydride generation atomic fluorescence spectrometry for trace arsenic(V) in environmental water samples

The eggshell membrane (ESM) contains several surface functional groups such as amines, amides and carboxylic groups with potential as SPE adsorbent for the retention of target species of interest. In this paper, the potential use of ESM, a typical biomaterial, as solid-phase extraction (SPE) adsorbent is evaluated for analysis of trace arsenic(V) in environmental water samples in combination with hydride generation atomic fluorescence spectrometry (HG-AFS). In order to obtain the satisfactory recovery of arsenic(V), various parameters including the desorption and enrichment conditions such as pH, the flow rate and the volume of sample solution, the amount of ESM and the content of sodium chloride were systematically optimized and the effects of co-existed ions were also investigated in detail. Under the optimal conditions, arsenic(V) could be easily extracted by the ESM packed cartridge and the breakthrough adsorption capacity was found to be 3.9 μg g⁻¹. The favorable limit of detection (LOD) for arsenic(V) was found to be 0.001 μg L⁻¹ with an enrichment factor of 33.3, and the relative standard deviations (R.S.Ds) was 2.1% for 0.6 μg L⁻¹ arsenic (n = 11). The reproducibility among columns was satisfactory (R.S.D. among columns is less than 5%). The proposed method has been successfully applied to analysis of arsenic(V) in aqueous environmental samples, which suggests the ESM can be an excellent SPE adsorbent for arsenic(V) pretreatment and enrichment from real water samples.     

Evaluation of eggshell membrane-based bio-adsorbent for solid-phase extraction of linear alkylbenzene sulfonates coupled with high-performance liquid chromatography

The potential of eggshell membrane (ESM) as a novel solid-phase extraction bio-adsorbent was investigated in the present study. The ESM with a unique structure of intricate lattice network showed a predominant ability to capture linear alkylbenzene sulfonates (LAS) as a model of organic pollutants by the hydrophobic interactions between ESM and LAS molecular at pH very close to the isoelectric point of ESM, which was similar to the most widely used trapping mechanism for SPE. Under the optimal conditions, the breakthrough capacities of the ESM packed cartridge for C10–C13 LAS homologues were found to be 30, 53, 50, and 43 μg g⁻¹, respectively. On the basis of high-performance liquid chromatography separation and UV detection of LAS homologues, the proposed system could respond down to 0.027 ng mL⁻¹ of LAS with a linear calibration range from 0.2 to 100 ng mL⁻¹, showing a good LAS enrichment ability of eggshell membrane biomaterial with high sensitivity, and could be successfully used for the detection of residual LAS in environmental water samples. The reproducibility among columns was satisfactory (RSD among columns is less than 10%). A comparison study with ESM, C8 and C18 as adsorbents for LAS demonstrated that ESM-based bio-adsorbent was advantageous over C8 and C18, the widely used traditional adsorbents.     

Carotenoid Contents of Lycium barbarum: A Novel QAMS Analyses,Geographical Origins Discriminant Evaluation,and Storage Stability Assessment

Given the standard substances of zeaxanthin and its homologues obtained from Lycium barbarum L. (LB) are extremely scarce and unstable, a novel quantitative analysis of carotenoids by single marker method, named QAMS, was established. Four carotenoids including lutein, zeaxanthin, β-carotene, and zeaxanthin dipalmitate were determined simultaneously by employing trans-β-apo-8′-carotenal, a carotenoid component which did not exist in LB, as standard reference. Meanwhile, β-carotene, another carotenoid constituent which existed in LB, was determined as contrast. The QAMS methods were fully verified and exhibited low standard method difference with the external standard method (ESM), evidenced by the contents of four carotenoids in 34 batches of LB samples determined using ESM and QAMS methods, respectively. HCA, PCA, and OPLS-DA analysis disclosed that LB samples could be clearly differentiated into two groups: one contained LB samples collected from Ningxia and Gansu; the other was from Qinghai, which was directly related to the different geographical location. Once exposed under high humidity (RH 75 ± 5%) at a high temperature (45 ± 5 °C) as compared with ambient temperature (25 ± 5 °C), from day 0 to day 28, zeaxanthin dipalmitate content was significantly decreased, and ultimately, all the decrease rates reached about 80%, regardless of the storage condition. Our results provide a good basis for improving the quality control of LB.     

香蕉皮对重金属离子铅的吸附性能研究

建立了香蕉皮快速、高效对重金属离子铅吸附性能的方法。采用分光光度法测定重金属离子铅的浓度,分别研究了7种不同形态的吸附剂对废水中重金属离子铅的吸附性能。在优化的实验条件下,重金属离子铅浓度与吸光度的线性相关系数R=0.999 83,且方法相对标准偏差(RSD)低于3%。结果表明,香蕉皮对废水中的重金属离子铅有良好的吸附效果,吸附率达到91.3%。利用香蕉皮去除废水中的重金属离子,可以变废为宝,且方法吸附率高、准确可靠、精密度高,可用于吸附废水中重金属离子铅。     

The effect of temperature on the mechanical properties of a protein-based biopolymer network

Several studies have shown that eggshell membrane (ESM) is a suitable biomaterial with potential applications in biomedicine such as wound repair and cell culture. In order to control and improve the use of ESM for biomedical applications their physical and structural properties must be known. In this paper, we have studied the effect of temperature on the mechanical properties of the ESM. Atomic force microscopy was used to assess the morphology of the ESM. The mechanical properties of the membranes were studied by means of uniaxial tensile tests carried out at four different temperatures. Differential scanning calorimetry and thermo-gravimetrical analysis were used to assess the thermal transitions of the ESM and the influence of the water content on its thermal behavior. The Young’s modulus showed a linear inverse dependence with regard to the temperature of the sample. A peak associated to the thermal denaturation of collagen was observed in the DSC tests of the membrane. These peaks showed a dependence on the water content of the specimens.     

Drug–Polymer Interactions in Hydrogel‐based Drug‐Delivery Systems: An Experimental and Theoretical Study

In drug‐delivery systems, drug transport is a key step, but the interpretation of the transport mechanism is still controversial. Here, we investigated a promising hydrogel library loaded with the anticonvulsant drug ethosuximide (ESM). The self‐diffusion coefficient of ESM was measured using two methods: a direct and advanced measurement with a pulsed field gradient spin‐echo (PFGSE) method, using an NMR spectrometer equipped with high‐resolution magic angle spinning (HR‐MAS) probe, and an indirect one based on fitting in vitro drug‐delivery data. Starting from the experimental data a mathematical model without fitted parameters was developed and all the phenomena involved, that is, adsorption and diffusion, were considered. At low drug concentrations, adsorption prevails and consequently the diffusivity in the gels is lower than that in water. At high drug concentrations, where all adsorption sites are saturated, the diffusion in the gels is similar to that in a water solution. This study may pave the way for better device design.     

Porosity‐Controlled Eggshell Membrane as 3D SERS‐Active Substrate

We report on the fabrication of a surface‐enhanced Raman scattering (SERS) platform, comprised of a three‐dimensional (3D) porous eggshell membrane (ESM) scaffold decorated with Ag nanoparticles (NPs). Both native and treated ESM were used, where the treated ESM pore size and fiber crossing density was controlled by timed exposure to hydrogen peroxide (H₂O₂). Ag NPs were synthesized in situ by reduction of silver nitrate with ascorbic acid. Our results demonstrate that H₂O₂‐treated Ag‐ESM provides a more densely packed 3D network of active material, which leads to consistently higher SERS enhancement than untreated Ag‐ESM substrates.     

Brewing MnWO<Subscript>4</Subscript> microspheres on the eggshell membrane at room temperature

Manganese tungstate microspheres were successfully fabricated using biomimetic process on living eggshell membrane (ESM) at room temperature. The microspheres were assembled by nanolamellar subunits, which are in the size with lengths of 1–2 nm, widths of 0.1–0.2 nm and thicknesses of 15–20 nm. The morphology and the size were governed mainly by the configuration and chemical functional residues of ESM. The functional groups such as amido groups and imido residues of ESM macromolecules could direct the formation of 15–20 nm thicknesses MnWO₄ nanolamellar subunits. The as-prepared microspheres exhibited similar structure with ESM, which would further illumination the potentials of bio-inspired manufactures in the field of synthesis inorganic materials. The article is published in the original.     

Mass fragmentation study of the trimethylsilyl derivatives of arctiin,matairesinoside, arctigenin,phylligenin, matairesinol,pinoresinol and methylarctigenin: Their gas and liquid chromatographic analysis in plant extracts

The mass fragmentation patterns and the characteristic behavior of the trimethylsilyl (TMS) derivatives of the dibenzylbutyrolactone-type (arctiin, arctigenin, methylarctigenin, matairesinoside, matairesinol) and those of the diphenylperhydrofurotetrahydrofurane-type (phylligenin, pinoresinol) lignans, obtained by gas chromatography–mass spectrometry (GC–MS), were presented. It was shown that upon acidic hydrolysis the dibenzylbutyrolactone-type lignans are stable while the diphenylperhydrofurotetrahydrofurane-type ones decompose. As a novelty to the field we confirmed that the fragment species of the derivatized lignan glycosides, in the presence of excess hexamethyldisilazane, leaded to their in situ derivatization. Quantification of the selective fragment ions of the TMS derivatives by GC–MS, in respect of the ions found one by one, and concerning the selective fragment ions {SFI(s)} in total, provided acceptable reproducibilities, suitable for quantitation purposes: varying between 1.20% and 6.6% relative standard deviation percentages (RSD%). For characterization of the behavior of various type of lignans, analyses were performed with the untreated and with the trifluoroacetic acid hydrolyzed plant extracts, from the same sample, in parallel, both by GC–MS and by high performance liquid chromatography–mass spectrometry, working in the positive electron ionization mode (HPLC–ESPI-MS). The analysis of lignans in fruit and leaf extracts (obtained from the Arctium, Centaurea and Forsythia plants) was confirmed both by GC–MS and by HPLC–ESPI-MS. Our multicomponent system (including the identification and quantification of sugars, sugar alcohols, and several members of various homologous series of acids, anthraquinones and flavonoids) has been extended to the analysis of lignan glycosides and to the free lignans. Reproducibilities in the quantitation of lignans in plant matrices, as averages on GC and HPLC basis, varied between 0.9% and 11% (RSD). The distribution of the lignan constituents was presented for 5 Arctium, for 8 Centaurea and for 4 Forsythia plant extracts: the total of lignan contents varied between 0.42 and 87.9 mg/g, respectively.     

Preparation of ion-imprinted silica gels functionalized with glycine, diglycine, and triglycine and their adsorption properties for copper ions

We report a new procedure for modifying the surface of silica gels with glycine, diglycine, and triglycine in the presence of copper ions to create a new type of copper-imprinted sorbent, which exhibits a high adsorption capacity and selectivity for copper ions. Our results show that copper adsorbed onto the copper-imprinted silica gel is 50% higher than that on nonimprinted silica gel at pH 4.5. The high adsorption capacity observed for the copper-imprinted silica gel is attributed to the stable copper complexes formed with two adjacent glycine, diglycine, or triglycine molecules with proper intermolecular distances obtained from the ion-imprinting procedure. Another possible reason for the high adsorption capacity is that the ion-imprinting procedure prevents the surface from being overcrowded; therefore, copper ions can form very stable 1:1 complexes with immobilized diglycine or triglycine. Interestingly, the imprinting effect is even more pronounced when the adsorption experiments are conducted in the presence of competing metal ions such as magnesium and calcium. The copper-imprinted silica gel exhibits a higher adsorption capacity than does the nonimprinted silica gel for all pH values, even when the concentrations of magnesium and calcium are 50 and 76 times higher than the concentration of copper.     

Speciation of selenium in selenium-enriched shiitake mushroom, Lentinula edodes

The major selenium compound in an aqueous extract of the most popular mushroom in Eastern Asian countries, shiitake (Lentinula edodes), fortified with selenium (Se) was identified by means of hyphenated techniques, i.e. HPLC-inductively coupled argon plasma mass spectrometry and HPLC-electrospray ionization mass spectrometry (HPLC–ICP MS and HPLC–ESI MS). Sixty-eight per cent of the total Se in the selenized shiitake was extracted with water, and 49.8% of the Se in the water extract was eluted in the high molecular mass fraction (>40,000 kDa) before incubation at 37 °C. After incubation, 40.6% of the Se in the water extract was eluted in a lower molecular mass fraction and the Se eluted in the high molecular mass fraction had decreased to 14.0%, suggesting that the major selenium compound in the water extract was initially in a form bound to macromolecule(s) and was then enzymatically liberated from the macromolecule(s). The retention time of the liberated selenium compound in HPLC–ICP MS matched that of selenomethionine (SeMet), and the masses of molecular and fragment ions detected by HPLC–ESI MS also suggested that the selenium compound was SeMet. The selenized shiitake accumulated Se as SeMet, and SeMet might be bound to the water extractable high molecular mass protein(s).Electronic Supplementary Material Supplementary material is available for this article at     

Acetylcholinesterase immobilised eggshell membrane-based optical biosensor for organophosphate detection

The development of an optical biosensor for the determination of malathion based on acetylcholinesterase (AChE) inhibition using Ellman’s reagent is reported. The AChE has been immobilised onto the eggshell membrane (ESM) using glutaraldehyde as a cross-linking agent. Scanning Electron Microscopic (SEM) studies and Fourier Transformed Infra-Red (FTIR) characterisations have been carried out to affirm the successful immobilisation of AChE onto the ESM. Under optimum conditions, the developed biosensor estimated the pesticide concentration in the range of 0.1–50 ng/mL with a limit of detection (LOD) of 0.1 ng/mL within 30 min. Parameters affecting the biosensor response such as concentration of enzyme, substrate and inhibition time were optimised. The stability and reusability of the AChE/ESM sensor have been observed as 31 days at 4°C and two times, respectively.     

Solvent‐Polymeric ISEs Tailored for Measurements in Solutions Containing Tetrabutylammonium,Cesium, and Calcium Ions

Ion‐selective electrodes are described, with membranes tailored for measurements of tetrabutylammonium ions in aqueous and formamide solutions, and for measurements of cesium and calcium ions in the presence of tetrabutylammonium. It is shown that reliable measurements of cesium ions are possible when a correction is introduced for interference from tetrabutylammonium, using Nikolsky selectivity coefficient. A novel membrane composition is described which ensures high selectivity to calcium ions over tetrabutylammonium.     

Determination of Bromide Production in Radiolysis of Nucleobases,Nucleosides, and Nucleotides Using HPLC

Abstract

Determination of the formation of bromide ions in intermolecular electron transfer in 5-bromouracil (BrUr) and its nucleoside and nucleotide derivatives with nucleobases, nucleosides, and nucleotides was carried out with high performance liquid chromatography (HPLC). Initial electron attachment, at high concentration of nucleobases, nucleosides, or nucleotides, is mainly on these molecules; intermolecular electron transfer then occurs between theses molecules and BrUr and the derivatives. The elimination of bromide ions from BrUr and the derivatives then follows. It is concluded that in neutral and basic solution (pH 6 to 10) there is a significant electron transfer from thymine (T), uracil (Ur), thymidine (dT), 2′-deoxyuridine (dU), or 2′-deoxyuridine-5′-monophosphate (dUMP) to BrUr and the derivatives. For example, at a concentration ratio of BrUr and T of 1 : 100, the yield of bromide ions is about 1.6, amounting to 59% of hydrated electron (e^{aq .}) yield in the radiolysis, in which the pseudo-first-order rate constants predict a bromide yield of less than 0.03.     

Biogenic synthesis of tubular SnO2 with hierarchical intertextures by an aqueous technique involving glycoprotein

Tetragonal SnO2 with hierarchical interwoven structures was prepared by a convenient soaking technique followed by a calcination treatment over 823 K. On the basis of the biomaterial eggshell membrane (ESM) being immersed in aqueous Sn colloid medium and a calcination treatment in succession, SnO2 nanocrystallites with a size of about 5 nm were formed, assembled into tubular fibers, and further intertwisted to construct hollow interconnective fibrous meshworks. With the biomaterial ESM serving as the physical substrate, chemical revulsant, and capping agent, the formation and assembly of hierarchical SnO2 nanomaterials should be under the control of glycoprotein contained in the ESM fiber mantle and directed by the interactions between the glycoprotein macromolecules (containing carboxyl, hydroxyl, and amino groups, etc.) and Sn colloid ingredients of the Sn impregnant. The unique hierarchical SnO2 nanomaterials of structural particularity and complexity are expected to find potential applications in gas sensors, photocatalysts, and dye-sensitized solar cells, etc.     

Total Oxidation of Methane Over La, Ce and Y Modified Manganese Oxide Catalysts

A series of catalysts based on high specific surface area MnO₂ precursor, and modified by La, Ce or Y ions were prepared and applied for methane deep oxidation. XRD and BET results indicate that La, Ce and Y ions as additives can impede the crystallization of catalysts at high temperatures. Thus, some catalysts that can maintain much higher specific surface area than unmodified MnOx were obtained. The main species of all catalysts are proved to be crystalline or amorphous Mn₂O₃ by XRD and H₂-TPR. The activities for methane total oxidation over these catalysts are compared with each other. It is found that all modified catalysts show higher activities than unmodified MnOx below 420°C, but show a little lower activity above this temperature.     

Photodissociation of state-selected cluster ions studied by mass-selective, pulsed-field threshold ionization spectroscopy

Delayed pulsed-field ionization of long-lived high Rydberg states yields vibrationally and partly rotationally resolved spectra of polyatomic molecular ions and of cluster ions when the resulting threshold ions are measured as a function of the excitation energy. The field ionized threshold ions are monitored and separated from the non-energy-selected ions in a reflecting field mass spectrometer with high mass resolution. The decay of the molecular or cluster ion core is monitored by the appearance of threshold ions at the daughter ion mass as a function of the selectively excited vibrational state. In this way, upper limits for dissociation thresholds of neutral and ionized dimers are obtained which are smaller than recent theoretical values from the literature. The appearance of daughter fragment ions after delayed pulsed-field ionization indicates that high Rydberg orbits are not destroyed by the dissociation of the core. Possible applications of our technique for the production of state-selected ions are discussed.