Insights into the Retention Mechanism for Small Neutral Compounds on Silica-Based Phenyl Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on phenylhexylsiloxane- and pentafluorophenylpropylsiloxane-bonded superficially porous silica stationary phases (Kinetex Phenyl-Hexyl and Kinetex F5) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation exchange) are important for the retention of weak bases for acetonitrile–water mobile phases, but virtually absent for the same compounds for methanol–water mobile phases. The selectivity of the Kinetex Phenyl-Hexyl stationary phase for small neutral compounds is similar to an octadecylsiloxane-bonded silica stationary phase with similar morphology Kinetex C-18 for both methanol–water and acetonitrile–water mobile phase compositions. The Kinetex Phenyl-Hexyl and XBridge Phenyl stationary phases with the same topology but different morphology are selectivity equivalent, confirming that solvation of the interphase region can be effective at dampening selectivity differences for modern stationary phases. Small selectivity differences observed for XTerra Phenyl (different morphology and topology) confirm previous reports that the length and type of space arm for phenylalkylsiloxane-bonded silica stationary phases can result in small changes in selectivity. The pentafluorophenylpropylsiloxane-bonded silica stationary phase (Kinetex F5) has similar separation properties to the phenylhexylsiloxane-bonded silica stationary phases, but is not selectivity equivalent. However, for method development purposes, the scope to vary separations from an octadecylsiloxane-bonded silica stationary phase (Kinetex C-18) to “phenyl phase” of the types studied here is limited for small neutral compounds. In addition, selectivity differences for the above stationary phases are enhanced by methanol–water and largely suppressed by acetonitrile–water mobile phases. For bases, larger selectivity differences are possible for the above stationary phases if electrostatic interactions are exploited, especially for acetonitrile-containing mobile phases.     

An assessment of the retention behaviour of polycyclic aromatic hydrocarbons on reversed phase stationary phases--thermodynamic behaviour on C18 and phenyl-type surfaces

The thermodynamic retention behaviour of a linear series of polycyclic aromatic hydrocarbons (PAHs) was investigated on C18 and selected phenyl-type reversed-phase stationary phases, namely C18, C18 Aqua, Propyl-phenyl and Synergi polar-RP stationary phases, using methanol mobile phases. The Propyl-phenyl stationary phase, despite having the lowest surface coverage, was found to exhibit significantly larger enthalpic interactions to the other Phenyl-type phase (Synergi polar-RP) even though this had a much higher surface coverage. This indicated that stronger interactions between the PAHs and the stationary phase ligands were occurring on the Propyl-phenyl phase. Evaluation of the elution band profile of the PAHs in the aqueous methanol mobile phase revealed fairly symmetrical bands for the C18, C18 Aqua and Synergi polar-RP, but severe peak tailing on the Propyl-phenyl phase. A change in mobile phase from methanol to acetonitrile improved the peak shape of the PAHs on the Propyl-phenyl phase, leading to the assumption that unfavourable pi-pi interactions were occurring between the electron-rich PAHs and the electron-rich phenyl rings of the Propyl-phenyl phase.     

Enhanced fluidity liquid chromatography for hydrophilic interaction separation of nucleosides

The application of enhanced fluidity liquid (EFL) mobile phases to improving isocratic chromatographic separation of nucleosides in hydrophilic interaction liquid chromatography (HILIC) mode is described. The EFL mobile phase was created by adding carbon dioxide to a methanol/buffer solution. Previous work has shown that EFL mobile phases typically increase the efficiency and the speed of the separation. Herein, an increase in resolution with the addition of carbon dioxide is also observed. This increase in resolution was achieved through increased selectivity and retention with minimal change in separation efficiency. The addition of CO₂ to the mobile phase effectively decreases its polarity, thereby promoting retention in HILIC. Conventional organic solvents of similar nonpolar nature cannot be used to achieve similar results because they are not miscible with methanol and water. The separation of nucleosides with methanol/aqueous buffer/CO₂ mobile phases was also compared to that using acetonitrile/buffer mobile phases. A marked decrease in the necessary separation time was noted for methanol/aqueous buffer/CO₂ mobile phases compared to acetonitrile/buffer mobile phases. There was also an unusual reversal in the elution order of uridine and adenosine when CO₂ was included in the mobile phase.     

Reversed-phase liquid chromatography and argentation chromatography of the minor capsaicinoids

An investigation of the liquid chromatography of the minor capsaicinoids in a commercial capsaicinoid mixture is reported. Twelve stationary phases including C₈, C₁₈, C₃₀, phenyl, and cation-exchange chemistries were examined in combination with isocratic aqueous methanol and aqueous acetonitrile mobile phases. A phenyl stationary phase and aqueous acetonitrile mobile phase baseline-resolved 7 of 11 capsaicinoids, and selected ion chromatograms (LC–ESI-MS) demonstrated this was the most effective reversed-phase separation. Argentation chromatography with an alkyl or phenyl column and aqueous silver nitrate–methanol mobile phase revealed the presence of the 6-ene-8-methyl and 6-ene-9-methyl homocapsaicin isomers and the absence of 7-ene-9-methyl homocapsaicin. A mixed phenyl–cation-exchange stationary phase (charged with silver ion) enabled unique and useful separations of the capsaicinoids.     

System Maps for Retention of Small Neutral Compounds on a Superficially Porous Ethyl-Bridged,Octadecylsiloxane-Bonded Silica Stationary Phase in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an ethyl-bridged, ocatadecylsiloxane-bonded superficially porous silica stationary phase (Kinetex EVO C18) for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not methanol–water mobile phase compositions. Compared with a superficially porous octadecylsiloxane-bonded silica stationary phase (Kinetex C18) with a similar morphology but different topology statistically significant differences in selectivity at the 95% confidence level are observed for neutral compounds that vary by size and hydrogen-bond basicity with other intermolecular interactions roughly similar. These selectivity differences are dampened with acetonitrile–water mobile phases, but are significant for methanol–water mobile phase compositions containing <30% (v/v) methanol. A comparison of a totally porous ethyl-bridged, octadecylsiloxane-bonded silica stationary phase (XBridge C18) with Kinetex EVO C18 indicated that they are effectively selectivity equivalent.     

Comparison of retention of aromatic hydrocarbons with polar groups in binary reversed-phase high-performance liquid chromatography systems

The retention of aromatic hydrocarbons with polar groups has been correlated as log k1 versus log k2 for reversed-phase high-performance liquid chromatography systems with different binary aqueous mobile phases containing methanol, acetonitrile or tetrahydrofuran as modifiers. Distinct changes in separation selectivity have been observed between tetrahydrofuran and acetonitrile or methanol systems. Methanol and acetonitrile systems show lower diversity of separation selectivity. The changes in retention and selectivity of aromatic hydrocarbons with various polar groups between any two chromatographic systems with binary aqueous eluents (tetrahydrofuran vs. acetonitrile, tetrahydrofuran vs. methanol and methanol vs. acetonitrile) have been interpreted in terms of molecular interactions of the solute with especially one component of the stationary phase region, i.e. extracted modifier, and stationary phase ordering. The ordering of the stationary phase region caused by modifier type influences the chromatographic selectivity of solutes with different molecular shape.     

Insights into the Retention Mechanism of Small Neutral Compounds on Octylsiloxane-Bonded and Diisobutyloctadecylsiloxane-Bonded Silica Stationary Phases in Reversed-Phase Liquid Chromatography

The system constants of the solvation parameter model are used to prepare system maps for the retention of small neutral compounds on an octylsiloxane-bonded (Kinetex C8) and diisobutyloctadecylsiloxane-bonded (Kinetex XB-C18) superficially porous silica stationary phases for aqueous mobile phases containing 10–70% (v/v) methanol or acetonitrile. Electrostatic interactions (cation-exchange) are important for the retention of weak bases with acetonitrile–water but not for methanol–water mobile phases. Compared with an octadecylsiloxane-bonded silica stationary phase (Kinetex C18) retention is reduced due to a less favorable phase ratio for both the octylsiloxane-bonded and diisobutyloctadecylsiloxane-bonded silica stationary phases while selectivity differences are small and solvent dependent. Selectivity differences for neutral compounds are larger for methanol–water but significantly suppressed for acetonitrile–water mobile phases. The selectivity differences arise from small changes in all system constants with solute size and hydrogen-bond basicity being the most important due to their dominant contribution to the retention mechanism. Exchanging the octadecylsiloxane-bonded silica column for either the octylsiloxane-bonded or diisobutyloctadecylsiloxane-bonded silica column affords little scope for extending the selectivity space and is restricted to fine tuning of separations, and in some cases, to obtain faster separations due to a more favorable phase ratio. For weak bases larger differences in relative retention are expected with acetonitrile–water mobile phases on account of the additional cation exchange interactions possible that are absent for the octadecylsiloxane-bonded silica stationary phase.     

High performance liquid chromatography of slightly soluble brominated indigoids from Tyrian purple

Attempts at identification of mollusc species producing Tyrian purple from archaeological material are usually done with high performance liquid chromatography in the reversed-phase system, but the peaks obtained are often wide and asymmetric. This is due to the low solubility of the indigoids and their brominated derivatives in the mobile phase, especially 6,6'-dibromoindigotin, which is soluble in only few, particular solvents. Our study focused on improving both symmetry and peak height for more precise quantification. The influence of various factors was evaluated: stationary phase characteristics, mobile phase composition, elution gradient parameters and temperature on the peak shape of the main components of Tyrian purple. The best results were obtained using highly retentive, but moderately bonded ODS stationary phases (about 2.8 μmol m(-2)), percolated with gradient of acetonitrile with acidified aqueous mobile phases (0.1% strong acid) at elevated temperatures (70°C). The upper quantification limit for 6,6'-dibromoindigotin was improved by over 350%, between standard and optimised systems. Using them, the detection and quantification of trace Tyrian purple components (less than 0.15%) aside from major indigoids becomes possible. Consequently, for the first time, the new analogues of brominated and unbrominated indirubins were found in the shellfish purple from Hexaplex trunculus.     

Reversed phase liquid chromatography of some benzimidazole derivatives

Summary The retention behaviour of a series of benzimidazole derivatives has been studied as a function of the water content of aqueous methanol and aqueous acetonitrile eluents. The relationship between the retention constant (log k) and the pH of the aqueous phase was linear, with slope values depending on the composition of the aqueous phase, the molecular structure of the compound, and the type of C-18 bonded stationary phase. The type of organic modifier significantly affected the shape of the relationship between log k and the volume fraction of organic modifier in the mobile phase.     

Liquid chromatographic separation of the thyroid hormones

The liquid Chromatographic separation of 3,3',5-triiodothyronine, 3,3',5'-triiodothyronine, and thyroxine with a nonpolar stationary phase was studied as a function of pH, temperature, organic content of the mobile phase, and ionic strength using aqueous phosphate—acetonitrile, aqueous phosphate—methanol, and aqueous phosphate— n-propanol mobile phase systems. It was demonstrated that the quality of the thyroid hormone separations, as determined by normalized peak capacity values, was unchanged with temperature, remained relatively constant with increasing ionic strength, and was affected to the greatest extent by changes in pH and organic modifier content of the mobile phase. Chromatographic behavior of the compounds studied as a function of these variables was found to be consistent with existing Chromatographic theory and/or empirical observations. Recommended conditions are aqueous phosphate—methanol mobile phase, pH 2–5 (aqueous portion), and high temperature (60–70°C).     

Separation of bromo- and iodosubstituted thyronines by high-performance liquid chromatography

Summary A reversed-phase high performance liquid chromatographic method on C-18 bonded silica is described for the separation of trisubstituted iodo/bromothyronines, which exert thyroid hormone activity. The composition of the mobile phase has been systematically optimized resulting in a ternary mixture of methanol/acetonitrile/water acidified with trifluoroacetic acid. The applicability of ultraviolet absorption detection, amperometric detection and off-line radioimmunoassay was investigated. The latter method allows detection of the different iodo/bromothyronines down to 40–120 ng/l mobile phase; this sensitivity is high enough for application to thyroid hydrolysates in order to clarify the question as to whether bromine can substitute iodine in the biosynthesis of thyroid hormones.     

High-performance liquid chromatography of substituted p-benzoquinones and p-hydroquinones. II. Retention behavior, quantitative structure-retention relationships and octanol-water partition coefficients

The retention behavior of methoxy-substituted p-benzoquinones and the corresponding hydroquinones in reversed-phase chromatography was examined on octylsilica and two octadecylsilica stationary phases and with five hydroorganic mobile phases containing acetonitrile, methanol or tetrahydrofuran and additionally in most cases (NH3OH)3PO4 used as a reducing and buffering agent. The retention order of benzoquinones and hydroquinones was the same on each stationary phase with either methanol or acetonitrile as the organic modifier. On the other hand, minor differences in the retention order were observed with the various stationary phases. In all cases, satisfactory quantitative structure-retention relationships (QSRRs) were found and the data suggest that the differences in the retention behaviour of octadecylsilicas used in this study are silanophilic interactions which, together with solvophobic interaction contribute to the retention of these eluites. Further analysis showed that QSRRs of sterically crowded molecules must take into account reduced surface area available for binding. The retention data obtained with use of aqueous tetrahydrofuran as mobile phase failed to give rise to satisfactory QSRRs. This was attributed to selective solvation of eluite by tetrahydrofuran and/or nearly equipotent binding of eluite and tetrahydrofuran to stationary phase.     

Retention properties of acetone-water mobile phases on a biphenylsiloxane-bonded silica stationary phase in reversed-phase liquid chromatography

The solvation parameter model system constants and retention factors were used to interpret retention properties of 39 calibration compounds on a biphenylsiloxane-bonded stationary phase (Kinetex biphenyl) for acetone-water binary mobile phase systems containing 30–70% v/v. Variation in system constants, phase ratios, and retention factors of acetone-water binary mobile phases systems were compared with more commonly used acetonitrile and methanol mobile phase systems. Retention properties of acetone mobile phases on a Kinetex biphenyl column were more similar to that of acetonitrile than methanol mobile phases except with respect to selectivity equivalency. Importantly, selectivity differences arising between acetone and acetonitrile systems (the lower hydrogen-bond basicity of acetone-water mobile phases and differences in hydrogen-bond acidity, cavity formation and dispersion interactions) could be exploited in reversed-phase liquid chromatography method development on a Kinetex biphenyl stationary phase.     

亲水/反相二维色谱法制备桔梗中的三萜皂苷

建立了亲水/反相二维色谱用于制备桔梗中三萜皂苷单体的方法。桔梗经水煮醇沉、反相和亲水两种模式的固相萃取后得到三萜皂苷类组分。选定XAmide色谱柱（150 mm×20 mm,5 μm）,以乙腈和水为流动相,在亲水色谱模式下进行组分制备。选择时间触发模式,以1 min为单位进行馏分收集,得到6~25 min之间的20个三萜皂苷精细组分。以第18个馏分（JG23）为例,在反相色谱模式下采用Atlantis Prep T3色谱柱（100 mm×30 mm,5 μm）制备,得到两个单体化合物。通过质谱和核磁共振对其进行定性,确定分别为deapi-platycoside E和platycoside E。实验结果表明,该制备方法具有好的正交选择性,对于复杂样品中三萜皂苷类化合物的分离纯化有一定的借鉴意义。     

Determination of flavonoids and saponins in Gynostemma pentaphyllum (Thunb.) Makino by liquid chromatography-mass spectrometry

Gynostemma pentaphyllum (Thunb.) Makino, a traditional Chinese herb possessing antitumor and antioxidant activities, has been shown to contain several functional components like saponins and flavonoids. However, their identities remain uncertain. The objectives of this study were to develop an appropriate extraction, purification and HPLC-MS method to determine saponins and flavonoids in G. pentaphyllum. Both flavonoids and saponins were extracted with methanol, followed by purification with a C18 cartridge to elute the former with 50% methanol and the latter with 100% methanol. A total of 34 saponins were separated within 40 min by a Gemini C18 column and a gradient mobile phase of acetonitrile and 0.1% formic acid in water, in which 18 saponins were identified by LC-MS with ESI mode and Q-TOF (LC/MS/MS). Similarly, a total of eight flavonoids were separated within 45 min by the same column and a gradient solvent system of methanol and 0.1% formic acid in water, with identification being carried out by a post-column derivatization method and LC-MS with ESI mode. The amounts of flavonoids in G. pentaphyllum ranged from 170.7 to 2416.5 μg g⁻¹, whereas saponins were from 491.0 to 89,888.9 μg g⁻¹.     

Analysis of variations in the contents of steroidal saponins in Fructus Tribuli during stir-frying treatment

Just as natural saponins transform into aglycones, secondary glycosides and their derivatives using biotransformation technology, steroidal saponins may also undergo similar transformation after stir-frying. The purpose of this study was to elucidate the variations and the reasons for these variations in the contents of steroidal saponins in Fructus Tribuli (FT) during a stir-frying treatment. Stir-fried FT was processed in different time–temperature conditions. An UHPLC–MS/MS method was established and fully validated for quantitative analysis. In addition, the simulation processing products of tribuluside A, terrestroside B, terrestrosin K, terrestrosin D and 25R-tribulosin were determined by qualitative analysis using UHPLC–Q-TOF–MS. The established UHPLC–MS/MS method provides a rapid, flexible, and reliable method for the quality assessment of FT. The present study revealed that furostanol saponins with a C22-OH group could transform into corresponding furostanol saponins with a C-20–C-22 double bond (FSDB) via dehydroxylation. Additionally, FSDB could be successively converted into its secondary glycosides via a deglycosylation reaction. The transformation of spirostanol saponins into corresponding aglycones via deglycosylation led to a decrease in spirostanol saponins and an increase in aglycones. The results of this research provided scientific evidence of variation and structural transformation among steroidal saponins. These findings might be helpful for elucidating the processing mechanism of FT.     

A New Furostanol Saponin from the Water-extract of Dioscorea nipponica Mak., the Raw Material of the Traditional Chinese Herbal Medicine Wei Ao Xin

26-O-β-D-Glucopyranosyl-furost-5(6),20(22)-dien-3β,26-diol 1, a new furostanol saponin, was isolated from the water-extract of Dioscorea nipponica Mak., the raw material of a traditional Chinese herbal medicine Wei Ao Xin. The structure of 1 was determined on the basis of its spectral data especially by NMR spectroscopy. The result provides the first example of naturally occurring furostanol saponins with a single saccharide chain at the C-26 position.     

Retention mechanisms in subcritical water reversed-phase chromatography

Differences in the properties of subcritical water and conventional water/acetonitrile and water/methanol mobile phases for reversed phase separations are explored. Using van’t Hoff plots enthalpies and entropies of transfer are compared among the mobile phases while linear solvation energy relationships are used to quantify contributions to retention based on a solute's polarizability, dipolarity, hydrogen bond donating ability, hydrogen bond accepting ability, and molecular size. Results suggest the presence of acetonitrile or methanol in the mobile phase may decrease dispersive interactions of the solute with the stationary phase compared to subcritical water, thereby lowering enthalpic contributions to retention. Enthalpic contributions are found to drive the retention of a methylene group in all systems studied.     

Isocratic and gradient elution in micellar liquid chromatography with Brij‐35

Polyoxyethylene(23)lauryl ether (known as Brij‐35) is a nonionic surfactant, which has been considered as an alternative to the extensively used in micellar liquid chromatography anionic surfactant sodium lauryl (dodecyl) sulfate, for the analysis of drugs and other types of compounds. Brij‐35 is the most suitable nonionic surfactant for micellar liquid chromatography, owing to its commercial availability, low cost, low toxicity, high cloud temperature, and low background absorbance. However, it has had minor use. In this work, we gather and discuss some results obtained in our laboratory with several β‐blockers, sulfonamides, and flavonoids, concerning the use of Brij‐35 as mobile phase modifier in the isocratic and gradient modes. The chromatographic performance for purely micellar eluents (with only surfactant) and hybrid eluents (with surfactant and acetonitrile) is compared. Brij‐35 increases the polarity of the alkyl‐bonded stationary phase and its polyoxyethylene chain with the hydroxyl end group allows hydrogen‐bond interactions, especially for phenolic compounds. This offers the possibility of using aqueous solutions of Brij‐35 as mobile phases with sufficiently short retention times. The use of gradients of acetonitrile to keep the concentration of Brij‐35 constant is another interesting strategy that yields a significant reduction in the peak widths, which guarantee high resolution.     

Evaluation of ternary mobile phases for reversed-phase liquid chromatography: Effect of composition on retention mechanism

The effect of varying mobile phase composition across a ternary space between two binary compositions is examined, on four different reversed-phase stationary phases. Examined stationary phases included endcapped C8 and C18, as well as a phenyl phase and a C18 phase with an embedded polar group (EPG). Mobile phases consisting of 50% water and various fractions of methanol and acetonitrile were evaluated. Retention thermodynamics are assessed via use of the van’t Hoff relationship, and retention mechanism is characterized via LSER analysis, as mobile phase composition was varied from 50/50/0 water/methanol/acetonitrile to 50/0/50 water/methanol acetonitrile. As expected, as the fraction of acetonitrile increases in the mobile phase, retention decreases. In most cases, the driving force for this decrease in retention is a reduction of the enthalpic contribution to retention. The entropic contribution to retention actually increases with acetonitrile content, but not enough to overcome the reduction in the enthalpic contribution. In a similar fashion, as methanol is replaced with acetonitrile, the v, e, and a LSER system constants change to favor elution, while the s and c constants change to favor retention. The b system constant did not show a monotonic change with mobile phase composition. Overall changes in retention across the mobile phase composition range varied, based on the identity of the stationary phase and the composition of the mobile phase.