Liquid chromatographic behavior of two alanine‐substituted calix[4]arene‐bonded silica gel stationary phases

Two new kinds of alanine‐substituted calix[4]arene stationary phases of 5,11,17,23‐p‐tert‐butyl‐25,27‐bis(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐26,28‐dihyroxycalix[4]arene‐bonded silica gel stationary phase (BABS4) and 5, 11, 17, 23‐p‐tert‐butyl‐25,26,27,28‐tetra(l ‐alanine‐methylester‐N‐carbonyl‐methoxy)‐calix[4]arene‐bonded silica gel stationary phase (TABS4) were prepared and characterized in the present study. They were compared with each other and investigated in terms of their chromatographic performance by using polycyclic aromatic hydrocarbons, disubstituted benzene isomers, and mono‐substituted benzenes as solute probes. The results indicated that both BABS4 and TABS4 exhibited multiple interactions with analytes. In addition, the commonly used Tanaka characterization protocol for the evaluation of commercially available stationary phases was applied to evaluate the properties of these two new functionalized calixarene stationary phases. The Tanaka test results were compared with Zorbax Eclipse XDB C₁₈ and Kromasil phenyl columns, respectively. BABS4 has stronger hydrogen‐bonding capacity and ion‐exchange capacity than TABS4, and features weaker hydrophobicity and hydrophobic selectivity. Both of them behave similarly in stereoselectivity. Both BABS4 and TABS4 are weaker than C₁₈ and phenyl stationary phases in hydrophobicity and hydrophobic selectivity.     

Effect of pH and mobile phase additives on the chromatographic behaviour of an amide‐embedded stationary phase: Cyanocobalamin and its diaminemonochloro‐platinum(II) conjugate as a case study

Several mobile phase additives (i.e., organic acids and their ammonium salts) were used to modulate the chromatographic retention of cyanocobalamin and its cis‐diaminemonochloroplatinum(II) conjugate, depending on the specific nature of the stationary phase. Regardless of the mobile phase additive, the positively charged cyanocobalamin‐cis‐diaminemonochloroplatinum(II) conjugate was systematically less retained than cyanocobalamin on a conventional octadecyl‐silica column. In contrast, the amide‐embedded C18 column exhibited a progressive increase in the conjugate retention time upon changing the mobile phase additive from organic (acetic, formic and trifluoroacetic) acids to ammonium salts, ultimately leading to an inversion of the elution order. This change of retention was interpreted by invoking the interplay between hydrophobic interactions, hydrogen bonding between the conjugate and the polar amide groups and the ion‐pairing ability of the lyophilic counterions, whereby the acetate anion was found to be the most suitable to control the solute retention.     

Comparison of a C30 Bonded Silica Column and Columns with Shorter Bonded Ligands in Reversed-Phase LC

The Carotenoid S is a new C₃₀ bonded silica stationary phase, intended for reversed-phase chromatographic applications, which is more hydrophobic and consequently shows stronger retention in comparison to conventionally used C₁₈ stationary phases. We compared the non-polar selectivities of the columns for homologous alkylbenzenes in acetonitrile—water and methanol–water mobile phases and polar reversed-phase selectivities employing the interaction indices and the Linear Free Energy Relationship models. Further, we investigated possibilities of separations of structurally closely related compounds in the groups of phenolic acids, flavones, phthalic acids and related compounds and of acylglycerols on the new C₃₀ column and with different types of columns for reversed-phase chromatography, including shorter alkyl C₄, C₈, C₁₈ and phenyl bonded stationary phases. The C₃₀ column has in some aspects properties similar to the non-endcapped Nova-Pak column for separation of some acylglycerols with equal equivalent carbon numbers, but enables separations of longer chain triacylglycerols in a single gradient run.

     

Cucurbit(6)uril immobilized on silica: A novel high‐performance liquid chromatographic stationary phase

In the present study, one of the new generation of host molecules, cucurbit(6)uril (CB(6)), was immobilized onto silica (CB(6)/SiO₂) by a sol–gel approach. CB(6)/SiO₂ was characterized by NMR spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and elemental analysis. It was used as a high‐performance liquid chromatographic stationary phase and its chromatographic performance was systematically investigated with different types of analytes as probes. The results revealed that the CB(6)/SiO₂ stationary phase exhibited weak hydrophobic and strong hydrophilic properties. Hence, the variables for hydrophilic interaction liquid chromatography, including components and pH of the mobile phase, were further investigated to explore the retention mechanism of this CB(6)/SiO₂ stationary phase. For less polar analytes, both hydrophobic and hydrophilic interactions could contribute to the retention, while for polar analytes, hydrophilic interaction may be predominant. Compared to the tetraethoxylsilane‐coated SiO₂ stationary phases, the CB(6)/SiO₂ stationary phase exhibited a different retention behavior toward basic analytes with excellent stability. It is a novel promising hydrophilic interaction liquid chromatography stationary phase.     

Evaluation of a combined linear–nonlinear approach for column characterization using modern alkaline‐stable columns as model

This study investigates if deeper understanding is achieved when combining nonlinear and linear chromatographic column characterization methods. As test systems, two hybrid columns (Phenomenex Gemini‐NX C₁₈ and Kromasil Eternity C₁₈) and one classic one (Kromasil‐C₁₈) were selected. The nonlinear methods were based on firm adsorption theory and involved determination of adsorption isotherms followed by calculations with a new numerical tool, adsorption energy distribution, on probe components at different pH values. The linear methods involved the hydrophobic subtraction model and selected probe components retention factors as a function of pH. The combined analysis indicated that both complementary and confirmative information can be achieved regarding the actual model systems.     

Automated screening of reversed‐phase stationary phases for small‐molecule separations using liquid chromatography with mass spectrometry

There are various reversed‐phase stationary phases that offer significant differences in selectivity and retention. To investigate different reversed‐phase stationary phases (aqueous stable C₁₈, biphenyl, pentafluorophenyl propyl, and polar‐embedded alkyl) in an automated fashion, commercial software and associated hardware for mobile phase and column selection were used in conjunction with liquid chromatography and a triple quadrupole mass spectrometer detector. A model analyte mixture was prepared using a combination of standards from varying classes of analytes (including drugs, drugs of abuse, amino acids, nicotine, and nicotine‐like compounds). Chromatographic results revealed diverse variations in selectivity and peak shape. Differences in the elution order of analytes on the polar‐embedded alkyl phase for several analytes showed distinct selectivity differences compared to the aqueous C₁₈ phase. The electron‐rich pentafluorophenyl propyl phase showed unique selectivity toward protonated amines. The biphenyl phase provided further changes in selectivity relative to C₁₈ with a methanolic phase, but it behaved very similarly to a C₁₈ when an acetonitrile‐based mobile phase was evaluated. This study shows the value of rapid column screening as an alternative to excessive mobile phase variation to obtain suitable chromatographic settings for analyte separation.     

Hydrophilic interaction chromatography: A promising alternative to reversed‐phase liquid chromatography systems for the purification of small protonated bases

The overloaded band profiles of the protonated species of propranolol and amitriptyline were recorded under acidic conditions on four classes of stationary phases including a conventional silica/organic hybrid material in reversed‐phase liquid chromatography mode (BEH‐C₁₈), an electrostatic repulsion reversed‐phase liquid chromatography C₁₈ column (BEH‐C₁₈+), a poly(styrene‐divinylbenzene) monolithic column, and a hydrophilic interaction chromatography stationary phase (underivatized BEH). The same amounts of protonated bases per unit volume of stationary phase were injected in each column (16, 47, and 141 μg/cm³). The performance of the propranolol/amitriptyline purification was assessed on the basis of the asymmetry of the recorded band profiles and on the selectivity factor achieved. The results show that the separation performed under reversed‐phase liquid chromatography like conditions (with BEH‐C₁₈, BEH‐C₁₈+, and polymer monolith materials) provide the largest selectivity factors due to the difference in the hydrophobic character of the two compounds. However, they also provide the most distorted overloaded band profiles due to a too small loading capacity. Remarkably, symmetric band profiles were observed with the hydrophilic interaction chromatography column. The larger loading capacity of the hydrophilic interaction chromatography column is due to the accumulation of the protonated bases into the diffuse water layer formed at the surface of the polar adsorbent. This work encourages purifying ionizable compounds on hydrophilic interaction chromatography columns rather than on reversed‐phase liquid chromatography columns.     

Preparation and chromatographic evaluation of new branch-type diamide-embedded octadecyl stationary phase with enhanced shape selectivity

A novel branch-type diamide-embedded octadecyl stationary phase was prepared by facile amidation. The preparation of this new phase involves the synthesis of new bifunctional silane ligand and surface modification of spherical silica via anchoring of silane coupling agent. The obtained diamide-embedded octadecyl stationary phase demonstrated excellent hydrophobic selectivity, as well as enhanced shape and planarity selectivity in comparison to commercial polymeric and monomeric C₁₈ phases, respectively, as revealed by the systematic investigation into its liquid chromatographic retention of isomeric polycyclic aromatic hydrocarbons. The applicability of this new stationary phase was further testified by the effective separation of isomeric compounds belong to different chemical classes, including chain isomers of alkylbenzenes, and positional isomers of substituted aromatics. An in-depth analysis of the separation mechanisms other than molecular shape recognition involved in the new stationary phase was performed using a linear solvation energy relationships model and compared with its monoamide and pure C₁₈ counterparts correspondingly. The performance of the new stationary phase in quantitative analysis of phenols from real-world samples was also evaluated.     

A simple approach to prepare a sulfone‐embedded stationary phase for HPLC

In the present study, a polar‐embedded reversed‐phase liquid chromatographic stationary phase that contained internal sulfone groups was prepared. The synthesis involved the “thiol‐ene” click chemistry between the vinyl functionalized silica and 1‐octadecanethiol, followed by the oxidization of sulfide to sulfone groups. The resulting material simultaneously possessed the alkyl chain, i.e. C18, and the internal sulfone groups. Elemental analysis demonstrates that the element contents of the C18/sulfone silica were C 8.94%, H 1.87% and S 0.66%. Chromatographic evaluations indicate that the C18/sulfone stationary phase exhibited a little less retention than the C18/sulfide one. A comparable chromatographic performance of neutral analytes was obtained on these two columns, but much better chromatographic performance in the case of basic and acid analytes was obtained on C18/sulfone stationary phase with additional features such as lower silanol activity, better stability (stable working conditions of pH 1.0–10.0), and better compatibility with 100% aqueous mobile phases. The batch‐to‐batch reproducibility was acceptable (the RSDs of retention times for the probes were no higher than 1.73%), demonstrating the suitability of the applied synthetic strategy for the new stationary phase. The C18/sulfone is a promising polar‐embedded RPLC stationary phase.     

Ultra‐high performance separation of basic compounds on reversed‐phase columns packed with fully/superficially porous silica and hybrid particles by using ultraviolet transparent hydrophobic cationic additives

The use of the tetrabutylammonium additive was investigated in the ultra‐high performance reversed‐phase liquid chromatographic elution of basic molecules of pharmaceutical interest. When added to the mobile phase at low pH, the hydrophobic tetrabutylammonium cation interacts with the octadecyl chains and with the residual silanols, thus imparting a positive charge to the stationary phase, modulating retention and improving peak shape of protonated basic solutes. Two sources of additive were tested: a mixture of tetrabutylammonium hydroxide/trifluoroacetic acid and tetrabutylammonium hydrogen sulfate. Retention and peak shape of 11 basic pharmaceutical compounds were evaluated on commercially available ultra‐fast columns packed with octadecyl stationary phases (Ascentis Express C18 2.0 µm, Acquity BEH C18 1.7 µm, Titan C18 1.9 µm). All columns benefit from the use of additive, especially tetrabutylammonium hydrogen sulfate, providing very symmetric peaks with reasonable retention times. Focusing on the probe compounds amitriptyline and sertraline, efficiency and asymmetry values were investigated at increasing retention factor. The trend is very different to that obtained in reversed‐phase conditions and the effect lies in the complex molecular interaction mechanisms based on hydrophobic and ion exchange interactions as well as electrostatic repulsion.     

Isocratic Separation of Dansylated Biogenic Amines on a C8‐Bonded Silica Column under the LC Elution of Methanol‐Based Mobile Phase

Under the elution of methanol‐based mobile phase, the isocratic resolution of 12 biogenic amines, including 1 aromatic, 2 heterocyclic and 9 aliphatic amines, as the dansylated derivatives has been accomplished in less than 25 minutes on a 15 cm C₈‐bonded column. The resolution can not be reproduced on other examined alkyl‐bonded phases (e.g., C₄ and C₁₈) under the same chromatographic conditions, or in the reversed‐phase mode. The retention, mainly as a result of hydrophobic interaction between analyte and stationary phase, can be adjusted by varying the percentage of methanol in the mobile phase. Also, incorporating acetic acid as additive to the mobile phase to protonate the analyte and silanol groups that are little shielding on the surface of silica gel reduces the dipole‐dipole interaction, and thus the retention scale, which in turn deteriorates the resolution. Furthermore, the elution reversal is plausible for some of analytes as a greater percent of acetic acid is used in the elution. Values of correlation coefficients (R²) range between 0.9995 and 0.9996, indicating good linearity.     

Synthesis and chromatographic evaluation of phenyl/tetrazole bonded stationary phase based on thiol‐epoxy ring opening reaction

A silica‐based reversed‐phase stationary phase bonding with phenyl and tetrazole groups was synthesized by thiol‐epoxy ring opening reaction. The bonded groups could not only provide hydrophobic interaction, but also π–π, hydrogen bonding, electrostatic interactions, and so on. The results of characterization with elemental analysis and solid‐state ¹³C cross‐polarization magic‐angle‐spinning NMR spectroscopy indicated the successful preparation of phenyl/tetrazole sulfoether bonded stationary phase. Chromatographic evaluation revealed that phenyl/tetrazole sulfoether bonded stationary phase behaved well under the reversed‐phase mode. The column parameters (H, S*, A, B, and C) showed different selectivity compared with some typical commercial columns, and it was validated by the separation of estrogen, ginsenoside, alkaloid samples. Based on the different selectivity between phenyl/tetrazole sulfoether bonded stationary phase and C18 columns, phenyl/tetrazole sulfoether bonded stationary phase also showed potential to construct a 2D reversed‐phase liquid chromatography system with C18. And it was verified by the separation of corydalis tuber and curcuma zedoary extracts.     

Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia-zirconia stationary phases for reversed-phase liquid chromatography

Three n-octadecylphosphonic acid-modified magnesia-zirconia reversed stationary phases (C₁₈PZM) are prepared via the strong Lewis base interactions between organophosphonate and magnesia-zirconia composite. And two of them are end-capped by using trimethylchlorosilane as end-capping agent in different procedures. Stability studies at extreme high pH conditions (pH 9-12) show that both the non-endcapped and endcapped columns are quite stable at pH 12 mobile phase. The reversed-phase liquid chromatographic behavior of three C₁₈PZM stationary phases are comparatively investigated in detail using a variety of basic compounds as probes. The retention of basic compounds on the three phases is studied over a wide range of pHs. And the possible retention mechanisms of basic compounds on the three stationary phases are discussed. The results show that the basic solutes retain by a hydrophobic and cation-exchange interaction mixed mechanism on three stationary phases when they are operated in eluents at pH values near to the pK_a of the Brönsted conjugate acid form of the analyte, suggesting that inherent zirconol groups on ZM are not expected to interact with bases via cation-exchange interaction at lower pH. Nonetheless, the non-endcapped phase differs markedly from the edncapped ones in retention and selectivity of basic solutes using eluents at pH 4.1, implying a complex retention mechanism at this pH. The cation-exchange sites under such conditions are more likely due to the adsorbed Lewis base anionic buffer constituents (acetate) on accessible ZM surface sites than the chemisorbed phosphonate. Although the three phases exhibit very similar chromatographic behavior with eluents at pH 10.1, and show in general satisfactory separation of basic compounds and alkaloids studied, the performance for a specific analyte, however, differs largely from column to column.     

Effect of the alkyl chain length of the bonded stationary phase on solute retention in reversed-phase high-performance liquid chromatography

Summary A comparison of the chromatographic retention characteristics of nonpolar bonded stationary phases was investigated. The results show that the interactions between the solutes and the stationary phases having C₂, C₈ and C₁₈ alkyl groups are almost similar in the range of the mobile phase investigated. This interaction is considered as the solvophobic effect.     

Studies on System Peaks in Ion-Pair Adsorption Chromatography. II. Effects on Analyte Peak Compression and Deformation

Abstract

Peak compression and deformation effects were studied in a reversed phase ion-pair adsorption chromatographic system, comprising silanized (C₁₈) silica as solid phase and an acidic mobile phase. An indirect detection technique was used, protriptyline (a secondary hydrophobic amine) being the probe, and substituted benzamides the analytes.     

New Fluorous Reversed Phase Silica Gels for HPLC Separations of Perfluorinated Compounds

Two new perfluoroalkyl-modified stationary phases were prepared and compared with two commercially available perfluorinated stationary phases (Fluophase RP and Fluophase Pentafluorophenyl) and a C₁₈-RP column with respect to retention times of an array of perfluoroalkyl-tagged and untagged molecules. A few highly lipophilic compounds were also included in the study. They showed high retention times on C₁₈-RP columns, but not on perfluorinated support materials. Perfluoroalkyl-tagged compounds revealed a weak interaction with the pentafluorophenyl-modified support. The interaction between perfluoroalkyl-tagged compounds and perfluoroalkyl-modified stationary phases was strong, and dependent on the chain length of the perfluoro tags. Surprisingly, there was only a small difference between the retention times of perfluorinated compounds on C₁₈-RP and C₆F₁₃-modified support. Fluorous-fluorous interactions became prevalent only with C₈F₁₇-tagged compounds on C₈F₁₇ functionalized silica gel. Compounds with two perfluoro tags showed a drastic increase in retention time, which might be due to a cooperative effect. These results demonstrate the uniqueness of fluorous-fluorous interactions based on linear perfluoroalkyl chains and open up possibilities for the design of new perfluoro tags for purifications and noncovalent attachments of catalysts or biomolecules on perfluorinated solid supports.     

Retention behavior of resorcinarene‐based cavitands on C8 and C18 stationary phases

The understanding of the retention behavior of large molecules is an area of interest in liquid chromatography. Resorcinarene‐based cavitands are cavity‐shaped cyclic oligomers that can create host–guest interactions. We have investigated the chromatographic behavior of two types of cyclic tetramers as analytes in high‐performance liquid chromatography. The experiments were performed at four different temperatures (15, 25, 35, 45°C) on two types of reversed stationary phases (C₈ and C₁₈) from two different manufacturers. We have found a huge difference between the retention of resorcinarenes and cavitands. In some cases, the retention factor of cavitands was even a hundred times larger than the retention factor of resorcinarenes. The retention of methylated derivates was two to four times larger compared to that of demethylated compounds on every column. The opposite retention behavior of the resorcinarenes and cavitands on the two types of stationary phases showed well the difference of the selectivity of the XTerra and BDS Hypersil columns. The retention mechanism was studied by the thermodynamic parameters calculated from the van't Hoff equation.     

Thermodynamic study of alkanes,alkylbenzenes and chloroalkanes retention on alkyl- and cyanoalkyl-bonded stationary phases in supercritical fluid chromatography

Summary The SFC retention behaviour of alkanes, alkylbenzenes and chloroalkane was investigated by studying solute/mobile phase/stationary phase interaction enthalpies. The methylene group and functional group contributions to solute retention were calculated in pure CO₂. It was shown that hydrophobic interactions mainly control retention in pure CO₂. Interaction between the polar extremity of C₁₀CN ligands and residual OH groups on the silica surface was suggested as an explanation of the retention obtained on such ligands. This was confirmed by experiments carried out with modified CO₂.     

Multi-modal applicability of a reversed-phase/weak-anion exchange material in reversed-phase,anion-exchange,ion-exclusion,hydrophilic interaction and hydrophobic interaction chromatography modes

We recently introduced a mixed-mode reversed-phase/weak anion-exchange type separation material based on silica particles which consisted of a hydrophobic alkyl strand with polar embedded groups (thioether and amide functionalities) and a terminal weak anion-exchange-type quinuclidine moiety. This stationary phase was designed to separate molecules by lipophilicity and charge differences and was mainly devised for peptide separations with hydroorganic reversed-phase type elution conditions. Herein, we demonstrate the extraordinary flexibility of this RP/WAX phase, in particular for peptide separations, by illustrating its applicability in various chromatographic modes. The column packed with this material can, depending on the solute character and employed elution conditions, exploit attractive or repulsive electrostatic interactions, and/or hydrophobic or hydrophilic interactions as retention and selectivity increments. As a consequence, the column can be operated in a reversed-phase mode (neutral compounds), anion-exchange mode (acidic compounds), ion-exclusion chromatography mode (cationic solutes), hydrophilic interaction chromatography mode (polar compounds), and hydrophobic interaction chromatography mode (e.g., hydrophobic peptides). Mixed-modes of these chromatographic retention principles may be materialized as well. This allows an exceptionally flexible adjustment of retention and selectivity by tuning experimental conditions. The distinct separation mechanisms will be outlined by selected examples of peptide separations in the different modes.     

A Comparison of the Retention Behaviour of Vitamin A and Some Metabolites Eluted from Four Different Reversed Phase High Performance Liquid Chromatographic Stationary Phases

Five retinoids, 13-cis-retinoic acid, 9-cis-retinoic acid, all-trans-retinoic acid, all-trans-retinol and 13-cis-retinal were isocratically separated from four different reversed phase high performance liquid chromatographic stationary phases. By taking advantage of the different retention mechanisms, present between the stationary phases and the analytes, the retinoids were separated with different elution orders using the same mobile phase composition. Two of the stationary phases appeared to have more possibilities to interact with the analytes than the usual hydrophobic interactions. The stationary phase with embedded polar groups showed hydrogen bonding properties and the calix[4]arene based stationary phase showed possibilities to form inclusion complexes with the analytes. These additional interactions appeared to benefit the separations of the analytes. This publication shows the benefits by isocratically separate retinoids employing other stationary phases than the conventional C₁₈ stationary phase.