An efficient p-tetranitrocalix[4]arene based adsorbent for the removal of carbofuran from aqueous media

Present study describes the adsorption of carbofuran (CF) from aqueous solutions using p-tetranitrocalix[4]arene based modified silica through batch and column methods. Various parameters were optimized including initial pesticide concentrations (5 mg L^?1), pH (2–10), contact time (60 min) and adsorbent dosage (30 mg). Modified silica was characterized by FT-IR and scanning electron microscope. The adsorption was further explained by Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models. Moreover, adsorption kinetics and adsorption thermodynamics were also investigated. Adsorption in dynamic mode was evaluated by breakthrough volumes and the Thomas model, applying batch conditions using 30 mg of modified silica at pH 5. It has been noticed that CF removal efficiency of modified silica was 98 % as compared to bare silica (48 %). Adsorption of CF on modified silica was found to be multilayer and physical in nature. Consequently, adsorption obeys pseudo-second-order kinetic equation following external mass transfer diffusion process as the rate-limiting step. Thermodynamic parameter (ΔG, ΔS, ΔH) values suggest that the adsorption of CF is spontaneous and exothermic in nature. Thomas model rate constant k _TH (cm³ mg^?1 min^?1) and maximum solid phase concentration (q _o mg g^?1) was found to be 0.52 and 12.3, respectively, in dynamic mode.     

Adsorption of uranium (VI) from aqueous solution by tetraphenylimidodiphosphinate

The adsorption of uranium (VI) using tetraphenylimidodiphosphinate (Htpip) was studied. Factors of affecting sorption efficiency have been investigated and results showed the adsorption of uranium (VI) was equilibrium at pH 4.5, time 20 min, adsorbent dosage 0.005 g and initial concentration 50 mg L^?1 reaching 99.86 mg g^?1 of adsorption capacity and 99.86% of removal efficiency. Additionally, the interfering ions studies showed that the adsorbent possessed excellent adsorption selectivity of uranium (VI). The surface morphology of Htpip was investigated by SEM. The adsorption process of uranium (VI) onto Htpip fit the pseudo-second-order kinetic model and the Freundlich isotherm model very well.     

Preconcentration of mercury(II) using a thiol-functionalized metal-organic framework nanocomposite as a sorbent

A novel type of porous metal-organic framework (MOF) was obtained from thiol-modified silica nanoparticles and the copper(II) complex of trimesic acid. It is shown that this nanocomposite is well suitable for the preconcentration of Hg(II) ions. The nanocomposite was characterized by Fourier transfer infrared spectroscopy, X-ray powder diffraction, energy-dispersive X-ray diffraction and scanning electron microscopy. The effects of pH value, sorption time, elution time, the volume and concentration of eluent were investigated. Equilibrium isotherms were studied, and four models were applied to analyze the equilibrium adsorption data. The results revealed that the adsorption process obeyed the Langmuir model. The maximum monolayer capacity and the Langmuir constant are 210 mg g^?1 and 0.273 L mg^?1, respectively. The new MOF-based nanocomposite is shown to be an efficient and selective sorbent for Hg(II). Under the optimal conditions, the limit of detection is 20 pg mL^?1 of Hg(II), and the relative standard deviation is <7.2 % (for n?=?3). The sorbent was successfully applied to the rapid extraction of Hg(II) ions from fish, sediment, and water samples.

Preparation of activated carbon from organic fraction of municipal solid wastes by ZnCl2 activation method and use it for elimination of chromium(VI) from aqueous solutions

In this study, the use of the organic fraction of municipal solid waste as an abundant and low-cost raw material for producing activated carbon was investigated. For this purpose, ZnCl₂ was used as a chemical activation agent and the carbonization process took place at 800 °C in N₂ atmosphere. Seven sorbents were prepared by chemical activation (pyrolysis under N₂ atmosphere at temperature of 800 °C after impregnation with ZnCl₂) with different ratios of ZnCl₂. The optimum ratio of organic fraction of municipal solid waste to ZnCl₂ was inspected via methylene blue number and iodine number (ASTM Designation: D4607–94). The results showed that the adsorbent with 60 % ZnCl₂/raw material was the most appropriate one with a satisfactory adsorption capacity, 112.4 mg g^?1 for methylene blue and 134.0 mg g^?1 for iodine. In addition, the structural analysis of this sorbent was performed using FT-IR, BET surface area, SEM–EDX and thermal analysis. Application of this sorbent to remove Cr(VI) from wastewater was studied to find an adsorption capacity of 66.7 mg g^?1. The experimental adsorption equilibrium data were fitted to Langmuir adsorption model with an acceptable adsorption capacity of 66.7 mg g^?1.     

Synthesis of tapioca cellulose-based poly(hydroxamic acid) ligand for heavy metals removal from water

A graft copolymerization was performed using free radical initiating process to prepare the poly(methyl acrylate) grafted copolymer from the tapioca cellulose. The desired material is poly(hydroxamic acid) ligand, which is synthesized from poly(methyl acrylate) grafted cellulose using hydroximation reaction. The tapioca cellulose, grafted cellulose and poly(hydroxamic acid) ligand were characterized by Infrared Spectroscopy and Field Emission Scanning Electron Microscope. The adsorption capacity with copper was found to be good, 210 mg g^?1 with a faster adsorption rate (t_1/2 = 10.5 min). The adsorption capacities for other heavy metal ions were also found to be strong such as Fe³⁺, Cr³⁺, Co³⁺ and Ni²⁺ were 191, 182, 202 and 173 mg g^?1, respectively at pH 6. To predict the adsorption behavior, the heavy metal ions sorption onto ligand were well-fitted with the Langmuir isotherm model (R² > 0.99), which suggest that the cellulose-based adsorbent i.e., poly(hydroxamic acid) ligand surface is homogenous and monolayer. The reusability was checked by the sorption/desorption process for six cycles and the sorption and extraction efficiency in each cycle was determined. This new adsorbent can be reused in many cycles without any significant loss in its original removal performances.     

A novel method of synthesizing solid phase adsorbent silica modified with xylenol orange: application for separation, pre-concentration and determination of uranium in calcium rich hydro-geochemical samples and sea water—Part 1

A novel, single-step route has been developed for the synthesis of solid phase adsorbent silica modified with xylenol orange. The addition of cationic surfactant cetyl tri-methylammonium bromide during the synthesis of the adsorbent supports the formation of a stable coating of xylenol orange on silica. The adsorbent showed no signs of degradation in contact with organic solvents and with solutions of varying pH between 1 and 9. This adsorbent has been used for separation and pre-concentration of uranium from hydro-geochemical samples with high calcium content and from sea water. Quantitative sorption of uranium was observed above pH 3 and complete desorption can be achieved using 0.2 M sodium pyrophosphate solution. The uranium content in the extract was determined by laser fluorimetric technique. The equilibration time is 30 min. The sorption capacity of the adsorbent for uranium is 10 mg g^?1. An enrichment factor of 50 was obtained by this procedure taking 500 mL of sample solution. Uranium concentrations down to 0.05 ng mL^?1 can be determined after pre-concentration using this method. The relative standard deviation at an 0.1 ng mL^?1 level is ±15%.     

Preparation and sorption performance of magnetic 18-crown-6/Fe3O4 nanocomposite for uranium(VI) in solution

A new magnetic nanocomposite material, magnetic 18-crown-6/Fe₃O₄ nanocomposite (MCFN), was prepared for the removal of U(VI) from aqueous solution. The MCFN was composed of Fe₃O₄ nanoparticales modified by covalent attachment of 18-crown-6, which can help the material to be removed easily from solution by magnetic force. As a new adsorbent for U(VI) removal, MCFN was characterized by infrared radiation, scanning electron microscopy with energy dispersive X-ray spectroscopy, vibrating sample magnetometer and thermal gravimetric analysis. Those factors affecting the sorption behavior of U(VI), such as acidity, temperature, initial concentration of U(VI) and the amount of crown ethers were studied by orthogonal experiments. A maximum U(VI) sorption capacity of 91.12 mg g^?1 was achieved at 45 °C, pH 5.5 for 30 min. The experimental results showed that MCFN had great sorption capacity, high selectivity and strong potentiality of enrichment and recovery for U(VI). In summary, MCFN is a promising candidate for U(VI) separation in future practical applications.     

Biosorption behaviors of uranium (VI) from aqueous solution by sunflower straw and insights of binding mechanism

Uranium (VI)-containing water has been recognized as a potential longer-term radiological health hazard. In this work, the sorptive potential of sunflower straw for U (VI) from aqueous solution was investigated in detail, including the effect of initial solution pH, adsorbent dosage, temperature, contact time and initial U (VI) concentration. A dose of 2.0 g L^?1 of sunflower straw in an initial U (VI) concentration of 20 mg L^?1 with an initial pH of 5.0 and a contact time of 10 h resulted in the maximum U (VI) uptake (about 6.96 mg g^?1) at 298 K. The isotherm adsorption data was modeled best by the nonlinear Langmuir–Freundlich equation. The equilibrium sorption capacity of sunflower straw was observed to be approximately seven times higher than that of coconut-shell activated carbon as 251.52 and 32.37 mg g^?1 under optimal conditions, respectively. The positive enthalpy and negative free energy suggested the endothermic and spontaneous nature of sorption, respectively. The kinetic data conformed successfully to the pseudo-second-order equation. Furthermore, energy dispersive X-ray, fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy demonstrated that U (VI) adsorption onto sunflower straw was predominantly controlled by ion exchange as well as complexation mechanism. The study revealed that sunflower straw could be exploited for uranium remediation of aqueous streams as a promising adsorbent.     

Removal of cadmium(II) and lead(II) ions from model aqueous solutions using sol–gel-derived inorganic oxide adsorbent

A study was conducted concerning the preparation and application of a novel synthetic oxide adsorbent of MgO-SiO₂ type. The material was prepared via a sol–gel route, utilizing magnesium ethoxide and tetraethoxysilane as precursors of magnesium oxide and silica respectively, and ammonia as a catalyst. The powder was comprehensively analyzed with regard to chemical composition (EDS method), crystalline structure, morphology, characteristic functional groups, electrokinetic stability and porous structure parameters (BET and BJH models). The synthesized oxide adsorbent is amorphous, with irregularly shaped particles, a relatively large surface area of 612 m²/g, and negative surface charge over almost the whole pH range. Comprehensive adsorption studies were performed to investigate the adsorption of Cd(II) and Pb(II) ions on the MgO–SiO₂ oxide adsorbent, including evaluation of adsorption kinetics and isotherms, the effect of pH, contact time and mass of adsorbent. It was shown that irrespective of the conditions of the adsorption process, the synthesized MgO–SiO₂ adsorbent exhibits slightly better affinity to lead(II) than to cadmium(II) ions (sorption capacity of 102.02 mg(Pb²⁺)/g and 94.05 mg(Cd²⁺)/g). The optimal time for removal of the analyzed metal ions was 60 min, although adsorption reached equilibrium within 10 min for Pb(II) and within 15 min for Cd(II) ions, which was found to fit well with a type 1 pseudo-second-order kinetic model. Additionally, adsorption efficiency was affected by the pH of the reaction system—better results were obtained for pH ≥7 irrespective of the type of metal ion.     

Sol–gel derived ion imprinted thiocyanato-functionalized silica gel as selective adsorbent of cadmium(II)

A Cd(II)-imprinted thiocyanato-functionalized silica gel adsorbent with high adsorption capacity was prepared by surface imprinting technique combined with sol–gel process for the selective adsorption of Cd(II) ion in aqueous solution, and was characterized by Fourier-transform infrared spectroscopy, nitrogen gas sorption and thermogravimetric analysis. The influences of different conditions (such as the pH of solutions, the contact time and the initial concentrations of Cd(II) ions) on the adsorption capacity of Cd(II) were investigated. The optimum pH of adsorption was in the range of 4–8.5. The adsorption equilibrium could be reached in 20 min. The relatively selectivity coefficients of the imprinted silica were higher than those of the non-imprinted adsorbents. Ho’s pseudo-second-order model well described the kinetics of the adsorption reaction. The adsorption process of metals followed Redlich–Peterson isotherm model, and the experimental value of maximum adsorption capacity for Cd(II) was 72.8 mg·g^?1. The positive value of ΔH ^o suggested endothermic nature of Cd(II) adsorption on the imprinted silica adsorbent. Increase in entropy of adsorption reaction was shown by the positive value of ΔS ^o and the negative value of ΔG ^o indicating that the adsorption was spontaneous in nature.     

Removal of lead from aqueous solutions by adsorption with surface precipitation

An activated carbon from Coconut (Cocos nucifera) shells was prepared by physical activation with carbon dioxide and water vapor. The activated carbon obtained has a surface area of 1058 m² g^?1 and such a high micropore volume of 0.49 cm³ g^?1. This carbon was studied for the removal of lead from water. Sorption studies were performed at 30 °C, at different pH and adsorbent doses, in batch mode. Lead precipitation was observed on the surface of the activated carbon. Maximum adsorption occurred at pH 9 for an adsorbent dose of 2 g L^?1. Kinetic studies, at the initial concentration of 150 mg L^?1 of lead, pH 5 and an adsorbent dose of 1 g L^?1, yielded an equilibrium time of 50 h for this activated carbon. The kinetic data were modeled with the pseudo first order, the pseudo second order and the Bangham models. The pseudo second order model fitted the data well. The sorption rate constant (7 × 10^?4 mol^?1 Kg s^?1) and the maximum amount of lead adsorbed (0.23 mol kg^?1) are quite good compared to the data found in literature. Sorption equilibrium studies were conducted in a concentration range of lead from 0 to 150 mg L^?1. In an aqueous lead solution with an initial concentration of 30 mg L^?1, at pH 5, adsorbent dose 1 g L^?1, activated Coconut shell carbon removed at equilibrium 100 % of the heavy metal. The equilibrium data were modeled with the Langmuir and Freundlich equations, of which the former gave the best fit. The Langmuir constants Q_{max eq} (0.23 mol kg^?1) and K_L (487667 L mol^?1) are in good agreement with literature. XPS studies identified adsorbed species as lead carbonates and/or lead oxalates and precipitates as lead oxide and/or lead hydroxide on the activated carbon surface. The Coconut shell activated carbon is a very efficient carbon due to its high surface area, to the presence of many micropores on its surface and to the presence surface groups like hydroxyls promoting adsorption in the porous system and lead crystal precipitation on the activated carbon surface.     

Application of polyaniline/bacterial extracellular polysaccharide nanocomposite for removal and detoxification of Cr(VI)

Polyaniline/bacterial extracellular polysaccharide (Pn/EPS) nanocomposite was prepared by in situ polymerization of aniline using ammonium peroxydisulfate as oxidant. Transmission electron micrograph showed that the surface of the nanocomposite was rough, providing good possibility for adsorption of Cr(VI). Under optimized conditions, the nanocomposite removed 97.3 % (25 mg L^?1) of Cr(VI) from aqueous solution. The Freundlich isotherm model and pseudo-first order rate expression better described the adsorption equilibrium of Pn/EPS nanocomposite. X-ray diffractogram peak for Cr₂O₃ (2θ = 24.5) in the nanocomposite confirmed the reduction of Cr(VI). Fourier transform infrared spectroscopy pattern of the nanocomposite confirmed the ionic interaction between Cr species and surface functional groups. The results of the study indicate that Pn/EPS nanocomposite could be used for the removal and detoxification of Cr(VI) from aqueous solution.     

Synthesis of a new ionic imprinted polymer for the extraction of uranium from seawater

The ionic imprinted polymer (IIP) of uranyl ion (UO₂ ²⁺) as the template was synthesized by the formation of binary complexes of UO₂ ²⁺ with 2,4-dioxopentan-3-yl methacrylate as functional monomer followed by thermal copolymerization with ethylene glycol dimethacrylate as cross-linking monomer in the presence of 2,2′-azobisisobutyronitrile as initiator and 1,4-dioxane as porogenic solvent. 50 mmol L^?1 HCl solution was used to leach out UO₂ ²⁺ ions from the IIP. Similarly, the control polymer was prepared under identical experimental conditions without using UO₂ ²⁺ ions. The above synthesized polymers were characterized by infra-red spectroscopy, thermo-gravimetric analysis and Barrett–Emmett–Teller surface area measurement. The maximum adsorption capacities of IIP and CP in (NH₄)₄[UO₂(CO₃)₃] solution were 15.3 and 11.2 mg U g^?1, respectively. The kinetics of adsorption followed a pseudo-second-order rate equation. The prepared IIP was successfully used to extract uranium from real seawater sample.     

Polyhydroxyquinoline-carbon nanotube chelating resin for selective adsorption of lead ions: multivariate optimization,isothermic, and thermodynamic study

In this work a facile hydrothermal route has been employed to prepare a multiwall carbon nanotube wrapped in a chelating resin. 8-Hydroxyquinoline and p-formaldehyde were used as monomer and linker for polymer synthesis. The prepared composite was employed as an efficient adsorbent for lead adsorption and preconcentration from various matrices. Effective parameters on lead adsorption have been optimized by central composite design. Results showed that equilibrium adsorption was obtained at pH = 4, with a shacking time of 15 min and adsorbent dosage of 15 mg. Isotherm study showed that the sorbent has adsorbent capacity of 250 mg g^?1; moreover, the process followed a Langmuir isotherm model. Thermodynamic investigation confirmed that lead adsorption is spontaneous, as well as follows endothermic path.     

Removal of cationic dyes: basic magenta and methylene blue from aqueous solution by adsorption on modified loofah

Modified loofah was prepared by a simple chemical graft method to improve its adsorption for cationic dyes. Experimental results showed that the maximum amounts of basic magenta and methylene blue loaded on the modified loofah were 83.5 and 85.5 mg g^?1, and that on the unmodified loofah were 22.2 and 33.7 mg g^?1, respectively. The adsorption for both dyes could reach equilibrium after 300 min. A pseudo-second-order model is suitable for describing the adsorption and desorption kinetics of both dyes on the modified sorbent. According to the intra-particle diffusion model, sorption and desorption processes for the two dyes both presented two distinct phases and were mainly controlled by intra-particle diffusion. The dye-loaded modified loofah could be regenerated by using the mixture solution of HCl and ethanol (V_HCl:V_ethanol = 3:2) as eluent. Adsorption in the binary system showed that adsorption of the dyes was depressed by the presence of the other dye, and the two dyes could be removed efficiently when the initial concentrations were lower than 5.0 × 10^?5 mol L^?1. The Langmuir competitive model was suitable to predict the sorption isotherm in the binary system.     

Magnetic Solid Phase Extraction Coupled with HPLC Towards Removal of Pigments and Impurities from Leaf-derived Paclitaxel Extractions of Taxus baccata and Optimization via Response Surface Methodology

A reusable and cost-effective magnetic graphite oxide (Fe₃O₄NPs@GO) nanocomposite was fabricated and applied for pre-purification of paclitaxel from leaf-derived crude extract of Taxus baccata. Furthermore, the potential roles of three crucial criteria (i.e., adsorbent dosage, sorption temperature and agitation/shaking power) on the two responses [i.e., efficiency of plant pigments removal (EPPR) and efficiency of taxol purity (ETP)] were examined and simultaneously optimized through response surface methodology. The nanocomposite was accurately characterized using TEM, AFM, BET, FT-IR, Raman and VSM. Moreover, for both proposed second-degree polynomial regression models, highly significant correlations were achieved between the experimental and predicted data (p < 0.0001). Meanwhile, the optimum conditions to simultaneously acquire the maximum EPPR (94.0 %) and ETP (11.4 %) were recorded as adsorbent dosage of 37.7 g L⁻¹, sorption temperature of 30.7 °C and agitation power of 153.1 rpm; and the predictive results were confirmed using experimental rechecking survey. Interestingly, upon five consecutive treatments, the nanocomposite still exhibited substantial potency in eliminating large amounts of plant pigments and impurities (up to 90 %), without significant reduction on sorption capacity and magnetism thereof. Our results demonstrated that the current nanocomposite, as SPE sorbent for MSPE, could be a simple, fast and reusable approach for HPLC-based purification studies of paclitaxel, and probably other plant secondary metabolites.

     

Preconcentration of Pb2+ by iron oxide/amino-functionalized silica core–shell magnetic nanoparticles as a novel solid-phase extraction adsorbent and its determination by flame atomic absorption spectrometry

The use of iron oxide/amino-functionalized silica core–shell magnetic nanoparticles for preconcentration of Pb²⁺ followed by its consecutive atomic absorption spectrometry determination is described. Effects of various operating variables, namely, solution pH, initial Pb²⁺ concentration, contact time, adsorbent dosage, sample volume, concentration and volume of desorbing solution, and co-existing ions on solid-phase extraction (SPE) of Pb²⁺ were studied by batch equilibrium technique. The experimental adsorption data were well fitted to the Langmuir isotherm model. The Langmuir adsorption capacity and equilibrium time were found to be 100 mg g^?1 and 20 min, respectively. The adsorption data were also fitted to kinetic pseudo-first-order and pseudo-second-order models. Kinetic studies showed that the adsorption followed pseudo-second-order model. Under the optimal SPE conditions, the enrichment factor, detection limit and relative standard deviation for determination of Pb²⁺ were found to be 211, 1 μg L^?1, and 3.7 % for 50 μg L^?1, respectively. The proposed method was successfully applied to the determination of lead in a real sample with satisfactory results.     

Adsorption characteristics of Titan yellow and Congo red on CoFe2O4 magnetic nanoparticles

This paper assesses the adsorption characteristics of Titan yellow and Congo red on CoFe₂O₄ magnetic nanoparticles. The adsorption behavior of Titan yellow and Congo red from aqueous solution onto CoFe₂O₄ magnetic nanoparticles has been determined by investigating the effects of pH, concentration of the dye, amount of adsorbent, contact time, ionic strength and temperature. Experimental results indicated that CoFe₂O₄ nanoparticles can remove more than 98 % of each dye under optimum operational conditions of a dosage of 15.0 mg CoFe₂O₄, pH 3.0, initial dye concentration of 22–140 mg L^?1, and contact times of 2.0 and 15.0 min for Congo red and Titan yellow, respectively. Langmuir and Freundlich isotherm models have been used to evaluate the ongoing adsorption kinetic equations. Regeneration of the saturated adsorbent was possible by NaCl/acetone solution as eluent. The maximum adsorption capacities were 200.0 and 212.8 mg dye per gram adsorbent for Congo red and Titan yellow, respectively. With the help of adsorption isotherm, thermodynamic parameters such as free energy, enthalpy and entropy have been calculated. On the basis of pseudo-first-order and pseudo-second-order kinetic equations, different kinetic parameters have been obtained.     

Adsorptive recovery of an essential rose oil component from aqueous solution by nanoporous carbon (CMK-3)

A nanoporous carbon (CMK-3) was synthesized and used to adsorb 2-phenylethanol (PEA) from aqueous solutions. The characterization of CMK-3 by N₂ adsorption isotherm revealed the formation of a nanoporous carbon with average pore diameter and surface area of 3.34 nm and 1268 m² g^?1, respectively. Column-like particle morphology of CMK-3 was observed from scanning electron microscope images. To evaluate the feasibility of CMK-3 as a potential PEA adsorbent, batch adsorption experiments were conducted for aqueous PEA solutions. The results showed that CMK-3 is an efficient sorbent for the separation of PEA from water. The optimized adsorbent doses were found to be 0.3 and 2.2 g L^?1 for 30 and 300 mg L^?1 PEA, respectively. Our studies about the effect of pH on CMK-3 adsorption capacity revealed that the adsorption capacity increased at lower pH due to the protonation of PEA. Three adsorption models, Langmuir, Freundlich and Temkin were used to describe the adsorption isotherms. Thermodynamic parameters such as ΔG ⁰, ΔH ⁰, and ΔS were also evaluated, and it was found that the sorption process was spontaneous, endothermic, and physical in nature. The adsorption kinetics was investigated in detail and the pseudo-second-order kinetic equation fitted the experimental data very well. The mechanistic study by Weber-Morris model revealed that the overall adsorption process was simultaneously governed by external mass transfer and intraparticle diffusion. Almost all (97 %) adsorbed PEA was successfully recovered into ethanol which is a common solvent in fragrance industry. CMK-3 was proved to be a promising adsorbent for the adsorption-recovery of PEA from aqueous solution.     

Preparation and characterization of L-glutamic acid-functionalized graphene oxide for adsorption of Pb(II)

An efficient adsorbent (L-Glu/GO) was successfully synthesized by the reaction between L-glutamic acid (L-Glu) and graphene oxide (GO). The structure and morphology of this adsorbent were characterized by FTIR, SEM, XRD, and TGA. The SEM result indicated that the adsorbent was a nanomaterial with a size of about 50–400 nm. The adsorption experiments of various heavy ions on L-Glu/GO demonstrated that the adsorption performance of Pb(II) was better than others. Various variables affecting the adsorption of L-Glu/GO for Pb(II) were systematically explored. The experimental results indicated that the maximum adsorption capacity and equilibrium time of Pb(II) on L-Glu/GO were 513.4 mg g^?1 and 40 minute, respectively. The sorption kinetics and isotherm fitted well with the pseudo-second-order model and Langmuir model, respectively. The sorption mainly was a chemical process. Thermodynamic studies revealed that the adsorption was a spontaneous and exothermic process. The adsorbent could be regenerated with HCl solution. Hence, it was suggested that the L-Glu/GO could be applied in the removal of Pb(II) from wastewaters.