Tabu search for graph partitioning

In this paper, we develop a tabu search procedure for solving the uniform graph partitioning problem. Tabu search, an abstract heuristic search method, has been shown to have promise in solving several NP-hard problems, such as job shop and flow shop scheduling, vehicle routing, quadratic assignment, and maximum satisfiability. We compare tabu search to other heuristic procedures for graph partitioning, and demonstrate that tabu search is superior to other solution approaches for the uniform graph partitioning problem both with respect to solution quality and computational requirements.     

A genetic approach to solving the problem of cyclic job shop scheduling with linear constraints

This study concerns the domain of cyclic scheduling. More precisely we consider the cyclic job shop scheduling problem with linear constraints. The main characteristic of this problem is that the tasks of each job are cyclic and are subjected to linear precedence constraints. First we review some approaches in the field of cyclic scheduling and present the cyclic job shop scheduling problem definition, which has an open complexity. Then we present a general approach for solving it, based on the coupling of a genetic algorithm and a scheduler. This scheduler utilises a Petri-net modelling the linear precedence constraints between cyclic tasks. The goal of this genetic algorithm is to propose an order of priority for jobs on the machines, to be used by the scheduler for solving resource conflicts. Finally a benchmark and some preliminary results of this approach are presented.     

An Ant Colony Optimization Algorithm for Shop Scheduling Problems

We deal with the application of ant colony optimization to group shop scheduling, which is a general shop scheduling problem that includes, among others, the open shop scheduling problem and the job shop scheduling problem as special cases. The contributions of this paper are twofold. First, we propose a neighborhood structure for this problem by extending the well-known neighborhood structure derived by Nowicki and Smutnicki for the job shop scheduling problem. Then, we develop an ant colony optimization approach, which uses a strong non-delay guidance for constructing solutions and which employs black-box local search procedures to improve the constructed solutions. We compare this algorithm to an adaptation of the tabu search by Nowicki and Smutnicki to group shop scheduling. Despite its general nature, our algorithm works particularly well when applied to open shop scheduling instances, where it improves the best known solutions for 15 of the 28 tested instances. Moreover, our algorithm is the first competitive ant colony optimization approach for job shop scheduling instances.     

Genetic algorithm-based subproblem solution procedures for a modified shifting bottleneck heuristic for complex job shops

In this paper, we consider a modified shifting bottleneck heuristic for complex job shops. The considered job shop environment contains parallel batching machines, machines with sequence-dependent setup times and reentrant process flows. Semiconductor wafer fabrication facilities (Wafer Fabs) are typical examples for manufacturing systems with these characteristics. Our primary performance measure is total weighted tardiness (TWT). The shifting bottleneck heuristic uses a disjunctive graph to decompose the overall scheduling into scheduling problems for single tool groups. The scheduling algorithms for these scheduling problems are called subproblem solution procedures (SSPs). In previous research, only subproblem solution procedures based on dispatching rules have been considered. In this paper, we are interested in how much we can gain in terms of TWT if we apply more sophisticated subproblem solution procedures like genetic algorithms for parallel machine scheduling. We conduct simulation experiments in a dynamic job shop environment in order to assess the performance of the suggested subproblem solution procedures. It turns out that using near to optimal subproblem solution procedures leads in many situations to improved results compared to dispatching-based subproblem solution procedures.     

Constraint Propagation and Problem Decomposition: A Preprocessing Procedure for the Job Shop Problem

In recent years, constraint propagation techniques have been shown to be highly effective for solving difficult scheduling problems. In this paper, we present an algorithm which combines constraint propagation with a problem decomposition approach in order to simplify the solution of the job shop scheduling problem. This is mainly guided by the observation that constraint propagation is more effective for small problem instances. Roughly speaking, the algorithm consists of deducing operation sequences that are likely to occur in an optimal solution of the job shop scheduling problem (JSP).The algorithm for which the name edge-guessing procedure has been chosen – since with respect to the job shop scheduling problem (JSP) the deduction of machine sequences is mainly equivalent to orienting edges in a disjunctive graph – can be applied in a preprocessing step, reducing the solution space, thus speeding up the overall solution process. In spite of the heuristic nature of edge-guessing, it still leads to near-optimal solutions. If combined with a heuristic algorithm, we will demonstrate that given the same amount of computation time, the additional application of edge-guessing leads to better solutions. This has been tested on a set of well-known JSP benchmark problem instances.     

Hybrid Rollout Approaches for the Job Shop Scheduling Problem

In this paper, we focus on heuristic approaches for solving the deterministic job shop scheduling problem. More specifically, a new priority dispatch rule and hybrid rollout algorithms are developed for approaching the problem under consideration. The proposed solution algorithms are tested on a set of instances taken from the literature and compared with other methods. The computational results validate the effectiveness of the developed solution approaches and show that the proposed rollout algorithms are competitive with respect to several state-of-art heuristics for solving the job shop scheduling problem. The author thanks Dr. Marco Mancini and Dr. Alessandro Tarasio for valuable suggestions about computational issues.     

A tabu search and a genetic algorithm for solving a bicriteria general job shop scheduling problem

This paper deals with a general job shop scheduling problem with multiple constraints, coming from printing and boarding industry. The objective is the minimization of two criteria, the makespan and the maximum lateness, and we are interested in finding an approximation of the Pareto frontier. We propose a fast and elitist genetic algorithm based on NSGA-II for solving the problem. The initial population of this algorithm is either randomly generated or partially generated by using a tabu search algorithm, that minimizes a linear combination of the two criteria. Both the genetic and the tabu search algorithms are tested on benchmark instances from flexible job shop literature and computational results show the interest of both methods to obtain an efficient and effective resolution method.     

Constraint-Based Job Shop Scheduling with IILOG SCHEDULER

We introduce constraint-based scheduling and discuss its main principles. An approximation algorithm based on tree search is developed for the job shop scheduling problem using ILOG SCHEDULER. A new way of calculating lower bounds on the makespan of the job shop scheduling problem is presented and we show how such results can be used within a constraint-based approach. An empirical performance analysis shows that the algorithm we developed performs well. Finally, taking the job shop scheduling problem as a start point, we discuss how constraint-based scheduling can be used to solve more general scheduling problems.     

A new neighborhood and tabu search for the Blocking Job Shop

The Blocking Job Shop is a version of the job shop scheduling problem with no intermediate buffers, where a job has to wait on a machine until being processed on the next machine. We study a generalization of this problem which takes into account transfer operations between machines and sequence-dependent setup times. After formulating the problem in a generalized disjunctive graph, we develop a neighborhood for local search. In contrast to the classical job shop, there is no easy mechanism for generating feasible neighbor solutions. We establish two structural properties of the underlying disjunctive graph, the concept of closures and a key result on short cycles, which enable us to construct feasible neighbors by exchanging critical arcs together with some other arcs. Based on this neighborhood, we devise a tabu search algorithm and report on extensive computational experience, showing that our solutions improve most of the benchmark results found in the literature.     

Feasible insertions in job shop scheduling,short cycles and stable sets

Insertion problems arise in scheduling when additional activities have to be inserted into a given schedule. This paper investigates insertion problems in a general disjunctive scheduling framework capturing a variety of job shop scheduling problems and insertion types. First, a class of scheduling problems is introduced, characterized by disjunctive graphs with the so-called short cycle property, and it is shown that in such problems, the feasible selections correspond to the stable sets of maximum cardinality in an associated conflict graph. Two types of insertion problems are then identified where the underlying disjunctive graph is through- or bi-connected. For these cases, it is shown that the short cycle property holds and the conflict graph is bipartite, allowing to derive a polyhedral characterization of all feasible insertions. An efficient method for deciding whether there exists a feasible insertion, and a lower and upper bound procedure for the minimum makespan insertion problem are developed. For bi-connected graphs, this procedure solves the insertion problem to optimality. The obtained results are applied to three extensions of the classical Job Shop, the Multi-Processor Task, Blocking and No-Wait Job Shop, and two types of insertions, job and block insertion.     

Solving the serial batching problem in job shop manufacturing systems

This paper addresses the serial batch scheduling problem embedded in a job shop environment to minimize makespan. Sequence dependent family setup times and a job availability assumption are also taken into account. In consideration of batching decisions, we propose a tabu search algorithm which consists of various neighborhood functions, multiple tabu lists and a sophisticated diversification structure. Computational experiments show that our algorithm outperforms a well-known tabu search approach which is developed for solving the traditional job shop problem. These results also confirm the benefits of batching.     

Optimal Configurations of General Job Shops

In this paper we study the problem of minimizing the expected number of jobs in a single class general open queueing network model of a job shop. This problem was originally posed by Buzacott and Shanthikumar [2] and solved by them for a special case. We extend their work in this paper. We derive feasibility conditions that simplify the analysis of the problem. We show that the optimal configuration can be completely characterized when both the utilizations of the machine centers are high and there are a large number of servers at each machine center. We also derive conditions under which the optimization problem reduces to solving a concave or a convex program and provide conditions under which the uniform flow line and the symmetric job shop (or variants of these) are optimal configurations for the job shop.     

NP-hardness of compact scheduling in simplified open and flow shops

In practical task scheduling it is sometimes required that the components of a system perform consecutively. Such a scheduling is called scheduling without waiting periods or no-wait and/or no-idle. In this article we study the complexity of some simplified scheduling problems of this kind in open shop and flow shop settings. In particular, we show that many trivial questions about the existence of schedule become NP-hard, even if there are only two machines or if the scheduling graph of a system is a path or a cycle.     

A branch and bound algorithm for scheduling trains in a railway network

The paper studies a train scheduling problem faced by railway infrastructure managers during real-time traffic control. When train operations are perturbed, a new conflict-free timetable of feasible arrival and departure times needs to be re-computed, such that the deviation from the original one is minimized. The problem can be viewed as a huge job shop scheduling problem with no-store constraints. We make use of a careful estimation of time separation among trains, and model the scheduling problem with an alternative graph formulation. We develop a branch and bound algorithm which includes implication rules enabling to speed up the computation. An experimental study, based on a bottleneck area of the Dutch rail network, shows that a truncated version of the algorithm provides proven optimal or near optimal solutions within short time limits.     

Bilevel programming approach applied to the flow shop scheduling problem under fuzziness

This paper presents a fuzzy bilevel programming approach to solve the flow shop scheduling problem. The problem considered here differs from the standard form in that operators are assigned to the machines and imposing a hierarchy of two decision makers with fuzzy processing times. The shop owner considered higher level and assigns the jobs to the machines in order to minimize the flow time while the customer is the lower level and decides on a job schedule in order to minimize the makespan. In this paper, we use the concepts of tolerance membership function at each level to define a fuzzy decision model for generating optimal (satisfactory) solution for bilevel flow shop scheduling problem. A solution algorithm for solving this problem is given. Mathematics Subject Classification: 90C70, 90B36, 90C99     

Integrated production and material handling scheduling using mathematical programming and constraint programming

In this article, we propose an integrated formulation of the combined production and material handling scheduling problems. Traditionally, scheduling problems consider the production machines as the only constraining resource. This is however no longer true as material handling vehicles are becoming more and more valuable resources requiring important investments. Their operations should be optimized and above all synchronized with machine operations. In the problem addressed in this paper, a job shop context is considered. Machines and vehicles are both considered as constraining resources. The integrated scheduling problem is formulated as a mathematical programming model and as a constraint programming model which are compared for optimally solving a series of test problems. A commercial software (ILOG OPLStudio) was used for modeling and testing both models.     

Modeling job shop scheduling with batches and setup times by timed Petri nets

Batch and setup times are two important factors in practical job shop scheduling. This paper proposes a method to model job shop scheduling problems including batches and anticipatory sequence-dependent setup times by timed Petri nets. The general modeling method is formally presented. The free choice property of the model is proved. A case study extracted from practical scheduling is given to show the feasibility of the modeling method. Comparison with some previous work shows that our model is more compact and effective in finding the best solution.     

Computing lower and upper bounds for a large-scale industrial job shop scheduling problem

In this paper we present a case study from the lighting industry concerned with the scheduling of a set of job families each representing the production of a particular end-item in a given quantity. It is a job shop type problem, where each job family has a number of routing alternatives, and the solution has to respect batching and machine availability constraints. All jobs of the same job family have a common release date and a common due date, and they differ only in size. The objective is to minimize the total tardiness of the job families, rather than that of individual jobs. We propose a two-phase method based on solving a mixed-integer linear program and then improving the initial solution by tabu search. We evaluate our method on real-world as well as generated instances.     

基于遗传算法的多目标柔性工作车间调度问题求解

本文针对柔性工作车间调度问题给出了一个有意义的综合目标尽可能缩短制造周期的同时尽可能的减少机器负荷。由于传统遗传算法在多目标柔性工作车间调度问题上的局限性，我们提出了一种改进遗传算法：首先，我们给出了针对综合目标的工序调度算法获得初始集合；接着，针对柔性工作车间调度问题的特点，我们在常用的基于工序顺序的编码方法上融入了基于机器分配的编码方法，并据此设计了相应的交叉变异操作；最后借鉴了物种进化现象中的环境迁移思想设计了解决多目标优化问题的迁移操作。实验结果表明，改进的遗传算法在多目标柔性工作车间调度问题的解决上要优于传统遗传算法。     

Application of an optimization problem in Max-Plus algebra to scheduling problems

The problem tackled in this paper deals with products of a finite number of triangular matrices in Max-Plus algebra, and more precisely with an optimization problem related to the product order. We propose a polynomial time optimization algorithm for 2×2 matrices products. We show that the problem under consideration generalizes numerous scheduling problems, like single machine problems or two-machine flow shop problems. Then, we show that for 3×3 matrices, the problem is NP-hard and we propose a branch-and-bound algorithm, lower bounds and upper bounds to solve it. We show that an important number of results in the literature can be obtained by solving the presented problem, which is a generalization of single machine problems, two- and three-machine flow shop scheduling problems. The branch-and-bound algorithm is tested in the general case and for a particular case and some computational experiments are presented and discussed.