TRANSIENT RESPONSE OF COPLANAR INTERFACIAL CRACKS BETWEEN TWO DISSIMILAR PIEZOELECTRIC STRIPS UNDER ANTI-PLANE MECHANICAL AND IN-PLANE ELECTRICAL IMPACTS

The dynamic response of multiple coplanar interface cracks between two dissimilar piezoelectric strips subjected to mechanical and electrical impacts is investigated. Solutions to two kinds of electric boundary conditions on crack surfaces, i.e. electric impermeable and electric permeable, are obtained. Laplace and Fourier transforms and dislocation density functions are employed to reduce the mixed boundary value problem to Cauchy singular integral equations,which can be solved numerically. The effects of electrical load, geometry criterion of piezoelectric strips, relative location of cracks and material properties on the dynamic energy release rate are examined.     

压电压磁复合材料中正六边形孔边裂纹的反平面断裂问题

基于线性磁电弹性理论,利用Schwarz-Christoffel(CS)变换技术和Stroth公式,首次系统研究了压电压磁复合材料中含带两个不对称裂纹的正六边形孔口问题在部分渗透磁电边界条件下的解析解.当忽略磁场时,磁电非渗透裂纹和磁电渗透裂纹两种极端情况下的解析解答可退化为文献已有研究结果.数值结果揭示了正六边形孔口尺寸、裂纹长度以及力电载荷和磁载荷对能量释放率的影响规律.研究结果表明：减小孔口边长和裂纹长度可以提高材料的可靠性;机械载荷总是促进裂纹扩展;在磁电非渗透和磁电部分渗透边界条件下,负电场和负磁场会延缓裂纹的扩展,而正电场可以增强或阻碍裂纹的扩展,这取决于所施加的电场和磁场的强度以及机械载荷的水平;在磁电渗透边界条件下,电场和磁场对裂纹的扩展没有影响.     

压电材料中裂纹面电边界条件的适用性

先分析理想裂纹面电边界条件(包括导通型裂纹和不导通型裂纹),然后分析缺陷的厚度及其对尖端场的影响,用封闭形式的解表示出了缺陷厚度的影响．结果指出,裂纹长厚比对计算结果是有影响的,除非裂纹极扁,不可通裂纹边界条件可以给出合理的结果,而可通边界条件只有在一些限制条件下才适用。     

Subsonic Griffith crack propagation in piezoelectric media

The plane problem of a Griffith crack steadily propagating in an anisotropic piezoelectric medium is investigated through an analytical approach which is new in this topic. Complete solutions are provided in the subsonic regime under permeable and impermeable boundary conditions and the combined effects of mechanical and electrical far-fields are pointed out.     

Analysis of electric boundary condition effects on crack propagation in piezoelectric ceramics

There are three types of cracks: impermeable crack, permeable crack and conducting crack, with different electric boundary conditions on faces of cracks in piezoelectric ceramics, which poses difficulties in the analysis of piezoelectric fracture problems. In this paper, in contrast to our previous FEM formulation, the numerical analysis is based on the used of exact electric boundary conditions at the crack faces, thus the common assumption of electric impermeability in the FEM analysis is avoided. The crack behavior and elasto-electric fields near a crack tip in a PZT-5 piezoelectric ceramic under mechanical, electrical and coupled mechanical-electrical loads with different electric boundary conditions on crack faces are investigated. It is found that the dielectric medium between the crack faces will reduce the singularity of stress and electric displacement. Furthermore, when the permittivity of the dielectric medium in the crack gap is of the same order as that of the piezoelectric ceramic, the crack becomes a conducting crack, the applied electric field has no effect on the crack propagation. The project supported by the National Natural Science Foundation of China (19672026, 19891180)     

Dynamic internal crack problem of a functionally graded magneto-electro-elastic strip

In this paper the dynamic anti-plane problem for a functionally graded magneto-electro-elastic strip containing an internal crack perpendicular to the boundary is investigated. The crack is assumed to be either magneto-electrically impermeable or permeable. Integral transforms and dislocation density functions are employed to reduce the problem to Cauchy singular integral equations. Numerical results show the effects of loading combination parameter, material gradient parameter and crack configuration on the dynamic response. With the magneto-electrically permeable assumption, both the magnetical and electrical impacts have no contribution to the crack tip field singularity. However, with the impermeable assumption, both the applied magnetical loads and electrical loads play a dominant role in the dynamic fracture behavior of crack tips. And for the two kinds of crack surface conditions, increasing the graded index can all retard the crack extension.     

Transient response of an interfacial crack between dissimilar magnetoelectroelastic layers under magnetoelectromechanical impact loadings: Mode-I problem

The dynamic response of an interfacial crack between two dissimilar magnetoelectroelastic layers is investigated under magnetic, electrical and mechanical impact loadings. Four kinds of ideal crack-face assumptions, i.e., magnetoelectrically impermeable (Case 1), magnetically impermeable and electrically permeable (Case 2), magnetically permeable and electrically impermeable (Case 3) and magnetoelectrically permeable (Case 4), are adopted separately. The dynamic field intensity factors and energy release rates are derived. The effects of loading combinations and crack configurations especially for the former on the dynamic response are examined according to energy release rate criterion. The numerical results show that, among others, a negative magnetic (or electrical) loading is generally prone to inhibit the crack extension rather than a positive one for a magnetically (or electrically) impermeable interfacial crack. Results presented in this paper should have potential applications to the design of multilayered magnetoelectroelastic structures.     

An I-integral method for crack-tip intensity factor variation due to domain switching in ferroelectric single-crystals

In the present study, an I-integral method is established for solving the crack-tip intensity factors of ferroelectric single-crystals. The I-integral combined with the phase field model is successfully used to investigate crack-tip intensity factor variations due to domain switching in ferroelectricity subjected to electromechanical loadings, which exhibits several advantages over previous methods based on small-scale switching. First, the shape of the switching zone around a crack tip is predicted by the time-dependent Ginzburg–Landau equation, which does not require preset energy-based switching criterion. Second, the I-integral can directly solve the crack-tip intensity factors and decouple the crack-tip intensity factors of different modes based on superimposing an auxiliary state onto an actual state. Third, the I-integral is area-independent, namely, the I-integral is not affected by the integral area size, the polarization distributions, or domain walls. This makes the I-integral applicable to large-scale domain switching. To this end, the electro-elastic field intensity factors of an impermeable crack in PbTiO₃ ferroelectric single crystals are evaluated under electrical, mechanical, and combined loading. The intensity factors obtained by the I-integral agree well with those obtained by the extrapolation technique. From numerical results, the following conclusions can be drawn with respect to fracture behavior of ferroelectrics under large-scale switching. Under displacement controlled mechanical loading, the stress intensity factors (SIFs) decrease monotonically due to the domain switching process, which means a crack tip shielding or effective switching-induced toughening occurs. If an external electric field is applied, the electric displacement intensity factor (EDIF) increases in all cases, i.e., the formed domain patterns enhance the electric crack tip loading. The energy release rate, expressed by the crack-tip J-integral, is reduced by the domain switching in all examples, which underlines the switching-induced-toughening effect. In contrast, under stress controlled load, the SIF evolves due to large-scale switching to a stable value, which is higher than the non-switching initial value, i.e., fracture is promoted in this case.     

Unified electrical boundary conditions for a crack interacting with a dislocation in piezoelectric media

This paper investigates the interaction problem between a dislocation and a finite crack in piezoelectric media. Analytical solutions for the generalized two-dimensional problem of a dislocation that is interacting with a finite crack in piezoelectric media are formulated via Stroh formalism. The analysis is conducted on the unified electrical crack boundary condition with the introduction of the electric crack condition parameter that can describe all the electric crack boundary conditions. The two ideal crack boundary conditions, namely, the electrically impermeable and permeable crack assumptions are obtained as two special cases for the current solutions. Based on the complex variable method and the perturbation technique, closed form solutions are obtained. The field intensity factors at the crack tip and the image forces on the dislocation due to the crack are computed and discussed.     

非均匀铁弹畴变对离面极化压电陶瓷应力强度因子的影响研究

基于文献中报道的试验结果，本文考虑非均匀的畴变过程区，它包含一个位于中心的饱和区和环绕饱和区的渐变区．为了描述外加应力引起的部分铁弹畴变，本文采用一个显式的基于最小能量原理的非均匀畴变准则．考虑离面极化的压电陶瓷，假设其初始极化矢量平行于离面方向．畴变后的电畴位于面内，具体方位由最大释放功来确定．基于非均匀畴变准则，本文给出了裂尖处非均匀畴变区几何及畴变体积分数的分布．并在静止裂纹和稳态扩展裂纹两种特殊情况下计算了铁弹畴变对裂尖处应力强度因子的影响．结果表明：(1) 静止裂纹尖端处的畴变减小了材料的起裂强度；(2) 准静态稳态裂纹附近的畴变增加了材料的断裂强度．且理论预测的R曲线渐近值与试验结果定量吻合．     

Transient response of a magnetoelectroelastic solid with two collinear dielectric cracks under impacts

Dynamic analysis of two collinear electro-magnetically dielectric cracks in a piezoelectromagnetic material is made under in-plane magneto-electro-mechanical impacts. Generalized semi-permeable crack-face boundary conditions are proposed to simulate realistic opening cracks with dielectric. Ideal boundary conditions of a combination of electrically permeable or impermeable and magnetically permeable or impermeable assumptions are several limiting cases of the semi-permeable dielectric crack. Utilizing the Laplace and Fourier transforms, the mixed initial-boundary-value problem is reduced to solving singular integral equations with Cauchy kernel. Dynamic intensity factors of stress, electric displacement, magnetic induction and crack opening displacement (COD) near the inner and outer crack tips are determined in the Laplace transform domain. Numerical results for a special magnetoelectroelastic solid are calculated to show the influences of the dielectric permittivity and magnetic permeability inside the cracks on the crack-face electric displacement and magnetic induction. By means of a numerical inversion of the Laplace transform, the variations of the normalized intensity factors of stress and COD are discussed against applied magnetoelectric impact loadings and the geometry of the cracks for fully impermeable, vacuum, fully permeable cracks and shown in graphics.     

Crack energy density in arbitrary direction for piezoelectrics and its characteristic features in electromechanical mixed mode crack

The concepts of crack energy density (CED) and its derivatives in arbitrary direction were established for piezoelectric material and, keeping their application to mixed mode fracture in mind, the characteristic features of them as fracture parameters were investigated based on the approximate equations for CED and its derivatives. That is, CED and its derivatives in arbitrary direction are defined first and separation into their each mode contribution is made. Subsequently, path independent integral expressions of them are derived, and then using them, approximate equations of each mode contribution of CED are obtained concretely for the case where linear singular solution is known. The resulting equations are then used to investigate the effects of electric field and electrical boundary condition on CED and its derivatives. An infinite piezoelectric plane with a crack inclined with respect to the poling direction is considered as a numerical example. Mode I contribution of mechanical CED is mainly employed as a possible fracture parameter for the study and it was shown that applied electric field significantly influences on fracture parameters especially for the impermeable crack perpendicular to the poling direction. The effect of electric field has the tendency to decrease as crack inclination angle increases. It was also found that, even for the impermeable crack perpendicular to the poling direction, crack propagation could be deviated from self-similar direction under a strong negative electric field, and this fact is qualitatively consistent with an existing experimental observation. For the ideally sharp crack with no width, impermeable and Hao and Shen type boundary conditions are admissible showing qualitative agreement with experimental results, but exact boundary condition is not suitable and finally consistent with permeable boundary condition.     

Crack energy density of a piezoelectric material under general electromechanical loading

Crack energy density is considered and used as a possible fracture parameter in piezoelectricity under arbitrary electromechanical remote loads. The closed-form solution of a crack in a piezoelectric infinite plate subjected to general static electromechanical loading is obtained through a method alternative to the more common Stroh’s formalism. This analytical method, which is based on the spectral theorem of linear algebra, involves a transformation of similarity induced by the fundamental matrix in order to express the equations governing the problem in terms of complex potentials. The application of the mechanical boundary condition of stress-free crack and of one of the three considered electric boundary conditions (impermeable, permeable or semipermeable) leads then to the formulation of a Hilbert problem whose solution yields the stress and displacement fields. The crack energy density factors for mixed mode are then calculated under different mechanical and electrical loadings, as well as under different electric boundary conditions. The non-singular terms of the stress expressions are retained as well. The definition of the minimum energy density fracture criterion, as proposed by Sih, is given, and the influence of load biaxiality and positive or negative applied electric field on the criterion results is analyzed. The prediction of the incipient branching angle as from the energy density approach is also compared to that arising from the maximum circumferential stress theory for a mixed mode loading condition. Numerical results and graphs are presented and discussed for a PZT-4 piezoelectric ceramic.     

Applicability of the crack-face electromagnetic boundary conditions for fracture of magnetoelectroelastic materials

This paper discusses the different electromagnetic boundary conditions on the crack-faces in magnetoelectroelastic materials, which possess coupled piezoelectric, piezomagnetic and magnetoelectric effects. A notch of finite thickness in these materials containing air (or vacuum) is also addressed. Four ideal crack-face electromagnetic boundary condition assumptions, that is, (a) electrically and magnetically impermeable crack, (b) electrically impermeable and magnetically permeable crack, (c) electrically permeable and magnetically impermeable crack and (d) electrically and magnetically permeable crack, are investigated separately. The influence of notch thickness on the field intensity factors at notch tips and the electromagnetic field inside the notch are obtained in closed-form. The results are compared with the ideal crack solutions. Applicability of crack-face electromagnetic boundary condition assumptions is discussed.     

Fracture analysis of circular-arc interface cracks in piezoelectric materials

The anti-plane problem of N arc-shaped interfacial cracks between a circular piezoelectric inhomogeneity and an infinite piezoelectric matrix is investigated by means of the complex variable method. Cracks are assumed to be permeable and then explicit expressions are presented, respectively, for the electric field on the crack faces, the complex potentials in media and the intensity factors near the crack-tips. As examples, the corresponding solutions are obtained for a piezoelectric bimaterial system with one or two permeable arc-shaped interfacial cracks, respectively. Additionally, the solutions for the cases of impermeable cracks also are given by treating an impermeable crack as a particular case of a permeable crack. It is shown that for the case of permeable interfacial cracks, the electric field is jumpy ahead of the crack tips, and its intensity factor is always dependent on that of stress. Moreover all the field singularities are dependent not only on the applied mechanical load, but also on the applied electric load. However, for the case of a homogeneous material with permeable cracks, all the singular factors are related only to the applied stresses and material constants.     

Some new aspects of boundary conditions at cracks in piezoelectrics

Fracture mechanical investigations of piezoelectric materials as components of smart structures have become popular in the last 30?years. In the early years of research, boundary conditions at crack faces have been adopted from pure mechanical systems under the assumption that boundaries were traction free. From the electrostatic point of view, cracks have been assumed to be either free of charge or fully permeable. Later, limitedly permeable crack boundary conditions have become popular among the community, nevertheless still assuming traction-free crack faces. Recently, the theoretical framework has been extended to include electrostatically induced mechanical tractions in crack models yielding a significant crack closure effect. However, these models are still simple, neglecting, e.g., the piezoelectric field coupling. In this work, we present an extended model for crack surface tractions yielding some interesting effects. In particular, the orientation of the electrical field with respect to the poling axis becomes important. Furthermore, applying a collinear stress parallel to the crack faces influences the Mode-I stress intensity factor and a Mode-II shear loading couples to the Mode-I SIF.     

The effective electroelastic property of piezoelectric media with parallel dielectric cracks

Existing studies on the coupled electroelastic behaviour of cracked piezoelectric media have been based mostly on the electrically impermeable and permeable crack models. The current paper presents a study of the effective electroelastic property of piezoelectric media weakened by parallel cracks using a dielectric crack model with the electric boundary condition along the crack surfaces being governed by the opening displacement. The theoretical formulation is obtained using the dilute model of distributed cracks and the solution of a single dielectric crack problem. It is observed that the effective electroelastic property of cracked piezoelectric media is nonlinear and sensitive to loading conditions. Different modes of crack deformation are predicted and discussed. Attention is paid to the transition between electrically permeable and impermeable crack models.     

An exact and explicit treatment of an elliptic hole problem in thermopiezoelectric media

This paper presents an exact solution for the problem of an elliptic hole or a crack in a thermopiezoelectric solid. First, based on the extended version of Eshelby–Stroh's formulation, the generalized 2D problems of an elliptical hole in a thermopiezoelectric medium subject to uniform heat flow and mechanical–electrical loads at infinity are studied according to exact boundary conditions at the rim of the hole. The complex potentials in the medium and the electric field inside the hole are obtained in closed form, respectively. Then, when the hole degenerates into a crack, the explicit solutions for the field intensity factors near the crack tip and the electric field inside the crack are presented. It is shown that the singularities of all the field are dependent on the material constants, the applied heat load and mechanical loads at infinity, but not on the applied electric loads. It is also found that the electric field inside the crack is linearly variable, which is different from the result based on the impermeable crack model.     

Analysis method of planar cracks of arbitrary shape in the isotropic plane of a three-dimensional transversely isotropic magnetoelectroelastic medium

The hyper-singular boundary integral equation method of crack analysis in three-dimensional transversely isotropic magnetoelectroelastic media is proposed. Based on the fundamental solutions or Green’s functions of three-dimensional transversely isotropic magnetoelectroelastic media and the corresponding Somigliana identity, the boundary integral equations for a planar crack of arbitrary shape in the plane of isotropy are obtained in terms of the extended displacement discontinuities across crack faces. The extended displacement discontinuities include the displacement discontinuities, the electric potential discontinuity and the magnetic potential discontinuity, and correspondingly the extended tractions on crack face represent the conventional tractions, the electric displacement and the magnetic induction boundary values. The near crack tip fields and the intensity factors in terms of the extended displacement discontinuities are derived by boundary integral equation approach. A solution method is proposed by use of the analogy between the boundary integral equations of the magnetoelectroelastic media and the purely elastic materials. The influence of different electric and magnetic boundary conditions, i.e., electrically and magnetically impermeable and permeable conditions, electrically impermeable and magnetically permeable condition, and electrically permeable and magnetically impermeable condition, on the solutions is studied. The crack opening model is proposed to consider the real crack opening and the electric and magnetic fields in the crack cavity under combined mechanical-electric-magnetic loadings. An iteration approach is presented for the solution of the non-linear model. The exact solution is obtained for the case of uniformly applied loadings on the crack faces. Numerical results for a square crack under different electric and magnetic boundary conditions are displayed to demonstrate the proposed method.     

An interface crack with contact zones in a piezoelectric/piezomagnetic bimaterial

An interface crack with a frictionless contact zone at the right crack tip between two semi-infinite piezoelectric/piezomagnetic spaces under the action of a remote mechanical loading, magnetic and electric fluxes as well as concentrated forces at the crack faces is considered. Assuming that all fields are independent on the coordinate x ₂ co-directed with the crack front, the stresses, the electrical and the magnetic fluxes as well as the derivatives of the jumps of the displacements, the electrical and magnetic potentials are presented via a set of analytic functions in the (x ₁, x ₃)-plane with a cut along the crack region. Two cases of magneto-electric conditions at the crack faces are considered. The first case assumes that the crack is electrically and magnetically permeable, and in the second case the crack is assumed electrically permeable while the open part of the crack is magnetically impermeable. For both these cases due to the above-mentioned representation the combined Dirichlet–Riemann boundary value problems have been formulated and solved exactly. Stress, electric and magnetic induction intensity factors are found in a simple analytical form. Transcendental equations and a closed form analytical formula for the determination of the real contact zone length have been derived for both cases of magnetic conditions in the crack region. For a numerical illustration of the obtained results a bimaterial BaTiO₃–CoFe₂O₄ with different volume fractions of BaTiO₃ has been used, and the influence of the mechanical loading and the intensity of the magnetic flux upon the contact zone length and the associated intensity factors as well as the energy release rate has been shown.