Laser-flash photolysis study of dithiobis (tetrazole); reactivities of tetrazole-thio radical

The photo-cleavage of S S bond of 5,5′-dithiobis (1-phenyl-1H-tetrazole) has been studied by the nanosecond-laser flash photolysis method. The transient absorption band at ca. 430 nm was attributed to 1-phenyl-1H-tetrazole-5-thio radical forming by the S S bond fission. For the reaction with conjugated dienes, an addition reaction takes place forming the S C bond, suggesting that unpaired electron of the radical localizes mainly on the S-atom. From the decay rates of the radical, the addition reaction rate constant for 2-methyl-1,3-butadiene is evaluated to be 5.5 × 10⁹ M⁻¹ s⁻¹ in THF at 23°C, which is as fast as diffusion controlled limit. The reactivity of the radical is ca. 100 times higher than that of the PhS˙. The reactivity of the thio radical to O₂ was too low to evaluate, which is one of the characteristics of a S-centered radical. The rate constant for 1,4-cyclohexadienene (1.4 × 10⁸ M⁻¹ s⁻¹) is larger than that of cyclohexene (2.8 × 10⁷ M⁻¹ s⁻¹) suggesting the hydrogen abstraction is a main reaction. The MO calculations have been performed for these radicals to reveal the reason of the high reactivity of the radical. © 1996 John Wiley & Sons, Inc.     

Stable Boron Dithiolene Radicals

Whereas low‐temperature (?78 °C) reaction of the lithium dithiolene radical 1 ^. with boron bromide gives the dibromoboron dithiolene radical 2 ^., the parallel reaction of 1 ^. with (C₆H₁₁)₂BCl (0 °C) affords the dicyclohexylboron dithiolene radical 3 ^.. Radicals 2 ^. and 3 ^. were characterized by single‐crystal X‐ray diffraction, UV/Vis, and EPR spectroscopy. The nature of these radicals was also probed computationally. Under mild conditions, 3 ^. undergoes unexpected thiourea‐mediated B?C bond activation to give zwitterion 4 , which may be regarded as an anionic dithiolene‐modified carbene complex of the sulfenyl cation RS⁺ (R=cyclohexyl).     

N-Heterocyclic Carbene Derived 3-Azabutadiene as a π-Base in Classic and Frustrated Lewis Pair Chemistry

N-Heterocyclic carbene (NHC) derived 3-azabutadienes 1 and 2 have been prepared by a single-step reaction of the corresponding NHC with cyclohexyl isocyanide. Compound 1 features π-basic, delocalized nucleophilic sites over the 3-azabutadiene moiety, therefore allowing for coordinating with small Lewis acids, such as AlCl₃, GaCl₃, and Me₂SAuCl, to form diverse classic Lewis adducts 3 – 5 . Combination of 1 with B(C₆F₅)₃ or [Ph₃C][B(C₆F₅)₄] resulted in single-electron transfer and the obtained radical cation was detected by EPR. In addition, a frustrated Lewis pair comprised of the π-basic 1 and BPh₃ effects the splitting of the O−H bond of phenol and the N−H bond of imidazole to give 7 and 8 , respectively. An intrinsic bond orbital (IBO) analysis of the pathway leading to 8 showcases the transformation of the delocalized π-electrons of 1 to a newly formed C−H localized σ-bond.     

Photoinduced highly selective thiophosphination of alkynes using a (PhS)2/(Ph2P)2 binary system

Development of highly selective method for simultaneous introduction of different heteroatom functions into carbon-carbon unsaturated bonds is of special interest. When a mixture of tetraphenyldiphosphine (Ph₂P)₂ and diphenyl disulfide (PhS)₂, and phenylacetylene in CDCl₃ was irradiated with a xenon lamp through Pyrex at ambient temperature, a highly regioselective addition of phosphino and thio groups into carbon-carbon triple bond took place simultaneously to give the corresponding thiophosphination product in high yield.     

Theoretical study of the interaction mechanism of single-electron halogen bond complexes H3C⋯Br-Y (Y = H, CN, NC, CCH, C2H3)

The characteristics and structures of single-electron halogen bond complexes [H₃C?Br-Y (Y = H, CCH, CN, NC, C₂H₃)] have been investigated by theoretical calculation methods. The geometries were optimized and frequencies calculated at the B3LYP/6-311++G** level. The interaction energies were corrected for basis set superposition error (BSSE) and the wavefunctions obtained by the natural bond orbital (NBO) and atom in molecule (AIM) analyses at the MP2/6-311++G** level. For each H₃C?Br-Y complex, a single-electron Br bond is formed between the unpaired electron of the CH₃ (electron donor) radical and the Br atom of Br-Y (electron acceptor); this kind of single-electron bromine bond also possesses the character of a “three-electron bond”. Due to the formation of the single-electron Br bond, the C-H bonds of the CH₃ radical bend away from the Br-Y moiety and the Br-Y bond elongates, giving red-shifted single-electron Br bond complexes. The effects of substituents, hybridization of the carbon atom, and solvent on the properties of the complexes have been investigated. The strengths of single-electron hydrogen bonds, single-electron halogen bonds and single-electron lithium bonds have been compared. In addition, the single-electron halogen bond system is discussed in the light of the first three criteria for hydrogen bonding proposed by Popelier.     

Palladium‐Catalyzed Reductive Insertion of Alcohols into Aryl Ether Bonds

Palladium on carbon catalyzes C?O bond cleavage of aryl ethers (diphenyl ether and cyclohexyl phenyl ether) by alcohols (R?OH) in H₂. The aromatic C?O bond is cleaved by reductive solvolysis, which is initiated by Pd‐catalyzed partial hydrogenation of one phenyl ring to form an enol ether. The enol ether reacts rapidly with alcohols to form a ketal, which generates 1‐cyclohexenyl?O?R by eliminating phenol or an alkanol. Subsequent hydrogenation leads to cyclohexyl?O?R.     

A Halogen‐Bonded Dimeric Resorcinarene Capsule

Iodine (I₂) acts as a bifunctional halogen‐bond donor connecting two macrocyclic molecules of the bowl‐shaped halogen‐bond acceptor, N‐cyclohexyl ammonium resorcinarene chloride 1 , to form the dimeric capsule [(1,4‐dioxane)₃@ 1 ₂(I₂)₂]. The dimeric capsule is constructed solely through halogen bonds and has a single cavity (V=511 ų) large enough to encapsulate three 1,4‐dioxane guest molecules.     

Cyclodextrins in polymer synthesis: free radical polymerisation of cyclodextrin complexes of cyclohexyl and phenyl methacrylate in aqueous medium

The polymerisation mechanism of 2,6-dimethyl-β-cyclodextrin (Me₂-β-CD) complexes of phenyl methacrylate ( 1 ) and cyclohexyl methacrylate ( 2 ) is described. The polymerisation of the complexes 1 a and 2a was carried out in water with potassium peroxodisulfate/potassium hydrogensulfite as initiator. The unthreading of the Me₂-β-CD during the polymerisation led to water-insoluble poly(phenyl methacrylate) ( 1b ) and poly(cyclohexyl methacrylate) ( 2b ). By comparison, analogously prepared polymers from uncomplexed monomers 1 and 2 in homogeneous organic solvent (THF) with AIBN as radical initiator showed significantly lower viscosities and were obtained in lower yields in both cases.     

Free-radical generation mechanism and antimalarial activity of cyclohexyl endoperoxides

A kinetic analysis has been carried out for a cascade of intramolecular oxidation reactions of free radicals generated in the redox reactions of substituted cyclohexyl endoperoxides (15 compounds) with the Fe²⁺ ion. Each radical conversion reaction has been characterized by its enthalpy, activation energy, and rate constant. Kinetic characteristics have been calculated by the intersecting parabolas method. Depending on their structure, cyclohexyl endoperoxides generate one to three radicals. There is a linear empirical correlation between the number of radicals generated by a peroxide and its molar antimalarial activity (IC ₅₀/M, where M is the molar mass of the peroxide). The peroxides that generate no more than one radical show no antimalarial activity.     

Phototransformations of azetidine radical cations stabilized in freonic matrices

It has been established that transformations of azetidine radical cations observed in freonic matrices under the action of light with λ = 436 nm (T = 77 K) are associated with C-N bond cleavage which corresponds to the cyclic form yielding a mixture of open distonic C-centered radical cations of the following structure: ·CH₂CH₂CH=NH ₂ ⁺      

Low-Temperature Isolation of a Labile Silylated Hydrazinium-yl Radical Cation, [(Me3Si)2N−N(H)SiMe3].+

The oxidation of silylated hydrazine, (Me₃Si)₂N−N(H)SiMe₃, with silver salts led to the formation of a highly labile hydrazinium-yl radical cation, [(Me₃Si)₂N−N(H)SiMe₃]^.+, at very low temperatures (decomposition > −40 °C). EPR, NMR, DFT and Raman studies revealed the formation of a nitrogen-centered radical cation along the N−N unit of the hydrazine. In the presence of the weakly coordinating anion [Al{OCH(CF₃)₂}₄]⁻, crystallization and structural characterization in the solid state were achieved. The hydrazinium-yl radical cation has a significantly shortened N−N bond and a nearly planar N₂Si₃ framework, in contrast to the starting material. According to DFT calculations, the shortened N−N bond has a total bond order of 1.5 with a π-bond order of 0.5. The π bond can be regarded as a three-π-electron, two-center bond.     

Stereoselective Synthesis of Frans-(E)-N-{2-[4-(3,4-Dichlorophenyl)but-2-En-2-Yl]Cyclohexyl}Pyrrolidine as an Alkene Mimetic of the Arylacetamide Analgesics

Diethylaluminum trimethylsilylacctylide reacted stereospecifically with the mesylate of trans-2-(N- pyrrolidinyl)cyclohexanol (2) to give trans-N-[2-(trimethylsilylacetylcnyl)cyclohexyl]pyrrolidine (3). The trimethylsilyl group in 3 was displaced with a 3,4-dichlorobenzoyl group to give ynone 4, which then underwent 1,4-addition with lithium dimethylcuprate to give trans enone 6 and its cis isomer 5 in a ratio 5:1. Reduction of the enones with NaBHVCeCl₃ resulted in cis and trans allylic alcohols 9 and 10. Both 9 and 10 were successfully deoxygenated with Znl₂-NaCNBH₃ reducing system to give trans-(E)-N-{2-[4-(3,4- dichlorophenyl)bul-2-en-2-yl]cyclohexyl}pyrrolidine (11) as the onty product. Olefin 11, a carbon-carbon double bond isostere of the prototypek-selective opioid analgesic U-50488, showed a 10³ fold reduction in K-affinity (K_ik = 1.6 × 10⁴ nM vs 15 nM for U-50488).     

Cascade radical cyclization/cross-coupling of halobenzamides by synergistic Cu/Fe catalysis: An access to 7-tert-alkylated isoquinolinediones

A Cu/Fe-cocatalyzed cyclization of halobenzamides with azo reagents involving regioselective radical/radical cross-coupling toward functionalized isoquinolinediones was developed. Applying azo reagents as the coupling partner, in the presence of cheap, facile and ligand-free catalytic combination of CuI/Fe(NH₄)₂(SO₄)₂·6H₂O/air, the halobenzamide radicals generated by a prior radical addition/cyclization process underwent radical/radical cross-coupling via the cleavage of C-X (X?=?F, Cl, Br, I, OMe, OBn) bond with excellent site selectivity, leading to a series of isoquinolinediones furnished dual distal α-functional quaternary moieties. In addition, the theoretical calculation on the C-X bond cleavage and the positional selectivity using unrestricted density functional theory (DFT) was also conducted.     

Evaluation of ruthenium‐based catalytic systems for the controlled atom transfer radical polymerisation of vinyl monomers

Only [RuCl₂(p‐cymene)(PR₃)] complexes where the phosphine ligand, PR₃, is both strongly basic and bulky proved to be effective catalysts for the controlled atom transfer radical polymerisation (ATRP) of methyl methacrylate and styrene. The best phosphine ligands were typically P(i‐Pr)₃, P(cyclohexyl)₂Ph, P(cyclohexyl)₃, and P(cyclopentyl)₃. Less basic and/or bulky phosphines led to ineffective systems for ATRP. Tricyclohexylarsine gave rise to a highly efficient catalyst system. However, related complexes in which the phosphine ligand was replaced by tricyclohexylstibine, nitrogen (piperidine and 4‐cyanopyridine) and carbon ligands (alkyl isocyanides) proved to be inefficient. The observation of a direct relationship between the p‐cymene lability (measured by TGA) and catalyst activity suggests that p‐cymene release is a prerequisite for the polymerisation process.     

Palladium(II) aryl-amido complexes of diphosphinoazines in unsymmetrical PNP’ pincer-type configuration

Square planar palladium(II) aryl-amido complexes of diphosphinoazines in monoanionic unsymmetrical PNP’ pincer-type coordination were prepared by reactions of phenyl-, o-tolyl-, or 2,6-dimethylphenyllithium with previously described chloro-amido complexes of diphosphinoazines having isopropyl, cyclohexyl and tert-butyl substituents on phosphorus atoms. The compounds were characterized by NMR showing free rotation around metal-aryl bond in the complexes; the presence of C_ipso-Pd bond was detected by two-dimensional experiments. In addition to that, crystal and molecular structure of one phenyl-amido complex, [Pd(C₆H₅){P(C₆H₁₁)₂CHC(Bu^t)NNC(Bu^t)CH₂P(C₆H₁₁)₂}], was determined by X-ray diffraction together with the structure of a chloro-amido complex [PdCl{PBu^t₂CHC(Bu^t)NNC(Bu^t)CH₂PBu^t₂}]. In both structures the ligand trans to the amide nitrogen is well surrounded by substituents on phosphorus atoms, the former complex showing significant interactions between two cyclohexyl hydrogen atoms and the π-system of the phenyl ring. The values od Pd-C and Pd-N bond distances in this complex are the same as those in a monodentate analog [Pd(PMe₃)₂(C₆H₅)(NHC₆H₅)] which contrasts with the different values in a similar PNP symmetrical pincer complex reported in the literature.     

Synthesis,Thermal Properties,and Radiolysis of Poly(Cyclohexyl α-Chloroacrylate)

Cyclohexyl α-chloroacrylate (CCA) was polymerized by radical anionic and γ-radiation initiation. The anionic polymerization of cyclohexyl α-chloroacrylate gave moderately isotactic polymer in toluene and syndiotactic-rich polymer in THF. Poly(cyclohexyl α-chloroacrylate) (PCCA) was found to undergo two-stage weight loss in thermogravimetric analysis, and the first-stage weight loss was attributed to the lactonization reaction. PCCA degraded under γ-radiation, and the radiation yields of crosslinking and scission, G _x and G _s, were 0.6 and 3.8, respectively.     

Nonadditivity of methyl group in single‐electron hydrogen bond of methyl radical‐water complex

The nonadditivity of methyl group in the single‐electron hydrogen bond of the methyl radical‐water complex has been studied with quantum chemical calculations at the UMP2/6‐311++G(2df,2p) level. The bond lengths and interaction energies have been calculated in the four complexes: CH₃? H₂O, CH₃CH₂? H₂O, (CH₃)₂CH? H₂O, and (CH₃)₃C? H₂O. With regard to the radicals, tert‐butyl radical forms the strongest hydrogen bond, followed by iso‐propyl radical and then ethyl radical; methyl radical forms the weakest hydrogen bond. These properties exhibit an indication of nonadditivity of the methyl group in the single‐electron hydrogen bond. The degree of nonadditivity of the methyl group is generally proportional to the number of methyl group in the radical. The shortening of the C···H distance and increase of the binding energy in the (CH₃)₂CH? H₂O and (CH₃)₃C? H₂O complexes are less two and three times as much as those in the CH₃CH₂? H₂O complex, respectively. The result suggests that the nonadditivity among methyl groups is negative. Natural bond orbital (NBO) and atom in molecules (AIM) analyses also support such conclusions. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Density Functional Studies on Thromboxane Biosynthesis: Mechanism and Role of the Heme‐Thiolate System

Reaction mechanisms for the isomerization of prostaglandin H₂ to thromboxane A₂, and degradation to 12‐L‐hydroxy‐5,8,10‐heptadecatrienoic acid (HHT) and malondialdehyde (MDA), catalyzed by thromboxane synthase, were investigated using the unrestricted Becke‐three‐parameter plus Lee–Yang–Parr (UB3LYP) density functional level theory. In addition to the reaction pathway through Fe^IV‐porphyrin intermediates, a new reaction pathway through Fe^III‐porphyrin π‐cation radical intermediates was found. Both reactions proceed with the homolytic cleavage of endoperoxide O? O to give an alkoxy radical. This intermediate converts into an allyl radical intermediate by a C? C homolytic cleavage, followed by the formation of thromboxane A₂ having a 6‐membered ring through a one electron transfer, or the degradation into HHT and MDA. The proposed mechanism shows that an iron(III)‐containing system having electron acceptor ability is essential for the 6‐membered ring formation leading to thromboxane A₂. Our results suggest that the step of the endoperoxide O? O homolytic bond cleavage has the highest activation energy following the binding of prostaglandin H₂ to thromboxane synthase.     

Complexation of 1,4‐Bis(phenylthio)butane on Mercury(II) Salts: Formation of Extended 2D Coordination Polymers

Two novel two‐dimensional (2D) coordination polymers of stoichiometry [{PhS(CH₂)₄SPh}Hg₂X₄]_n (X = Cl, 2a ; X = Br, 2b ) have been prepared by treatment of HgX₂ with PhS(CH₂)₄SPh 1 , acting as bridging dithioether ligand. The extended 2D structures result from bridging coordination of 1 between two mercury atoms and intermolecular Hg–X interactions, thus linking the HgX₂ units in two dimensions. As established for 2a,b by single‐crystal X‐ray diffraction, the coordination around the Hg centers in both isomorphous compounds (monoclinic, space group P2₁/c) is distorted tetrahedral, with quite short Hg‐thioether bonds of 2.4780(19) ( 2a ) and 2.499(3) Å ( 2b ), respectively.     

Preparation and thermal properties of tetrahedral cyano complexes containing the [Me2PhS]+ cation

The preparation of three new tetracyano complexes of the type [Me₂PhS]₂ [M(CN)₄] (M=Zn, Cd, Hg) is described in this paper. The prepared compounds were identified by elemental analysis and studied by using infrared spectroscopy and thermal analysis.

---

Zusammenfassung Es wird die Darstellung von drei neuen Tetracyanokomplexen des Types [Me₂PhS]₂[M(CN)₄] mitM=Zn, Cd bzw. Hg beschrieben. Die hergestellten Verbindungen wurden durch Elementaranalyse identifiziert und mittels IR-Spektroskopie und Thermoanalyse untersucht.