Prepare high efficiency Mn-doped Zn2SiO4 green phosphors in air using nano-particles

In this study, nano-scale precursors of ZnO, SiO₂, and MnO₂ powders were used to prepare mixtures with the compositions of 2ZnO+SiO₂+X mol% MnO₂ (X=MnO₂/2ZnO, abbreviated as Zn₂SiO₄-X-MnO₂), where 2≤X≤5. The mixed Zn₂SiO₄-X-MnO₂ mixtures were calcined from 900 to 1300 °C in air in order to synthesize Zn₂SiO₄:Mn²⁺ green phosphors. The X-ray diffraction patterns of Zn₂SiO₄-X-MnO₂ particles indicated that ZnO was present in the 900 °C-calcined Zn₂SiO₄-X-MnO₂ phosphors, but not in particles calcined at temperatures of 1000 °C and higher. However, the unapparent secondary phase of ZnMnO₃ was found in the 1200 and 1300 °C-calcined Zn₂SiO₄-5-MnO₂ compositions. The luminescent characteristics of Zn₂SiO₄-X-Mn²⁺ phosphors were compared with that of a commercial product (Nichia Corp., Japan). The photoluminescence (PL) intensity of 1200 °C-calcined Zn₂SiO₄-4-MnO₂ phosphors was higher and the decay times of all synthesized Zn₂SiO₄-X-MnO₂ phosphors were longer than those of the commercial product.     

Preparation and magnetic properties of Mn12 clusters with 4-cyanobenzenecarboxylate ligand, [Mn12O12(O2CC6H4-p-CN)16(H2O)4] and its tetraphenylphosphonium salts

The new Mn₁₂ magnetic clusters with 4-cyanobenzenecarboxylate ligand, [Mn₁₂O₁₂(O₂CC₆H₄-p-CN)₁₆(H₂O)₄] (1) and its singly (2) and doubly (3) reduced analogs as their tetraphenylphosphonium salts, have been synthesized and characterized by elemental analyses, Raman, ESI-MS spectra and magnetic measurements with a SQUID magnetometer. Unlike the known Mn₁₂ oxocarboxylate clusters, which are very soluble in CH₃CN or CH₂Cl₂, the complex 1 is not dissolved in organic solvents providing an indication for strong intermolecular interactions which lead to strong dipole–dipole interactions between clusters and affect the magnetic behavior. The one-electron and two-electron reduced clusters (2, 3) contain the bulk counterion and dissolve in CH₃CN. They show magnetic properties characteristic for anion Mn₁₂ single-molecule magnets.     

Redox reactions of K3[Fe(CN)6] during mechanochemically stimulated phase transitions of AlOOH

Thermally induced redox reactions of K₃[Fe(CN)₆] (1) were investigated for a broad temperature range by thermal methods and structure analytical methods (ESR and Mößbauer spectroscopy, X-ray Powder diffraction and XANES). Based on the influence of the mechanically activated and transforming matrices 2 and 3, redox processes can be tuned to form doped Al₂O₃ systems which contain either isolated Fe³⁺ centres or redox active phases and precursors like (Al_1−xFe_x)₂O₃ (4), (Al_3−xFe_x)O₄ (5), Fe₃O₄, Fe₂O₃ and Fe⁰. The phase Fe₃C and the chemically reactive C-species were detected during the reaction of 1. The final composition of the doped products of α-Al₂O₃ is mainly influenced by the chemical nature of the Fe doping component, the applied temperature and time regime, and the composition of the gas phase (N₂, N₂/O₂ or N₂/H₂). From the solid state chemistry point of view it is interesting that the transforming matrix (2 and 3) possesses both oxidative and protective properties and that the incorporation of the Fe species can be performed systematically.     

Organic radical molecular solids based on [(TCNQ)n] (n=1 or 2): Syntheses, crystal structures, magnetic properties and DFT analyses

Four molecular solids consisting of the 7,7,8,8-tetracyanoquinodimethane (TCNQ) radical and benzylpyridinium or benzylquinolinium derivatives with molar ratios of 1:1 (1-3) and 2:1 (4) have been prepared and characterized. In the crystals of 1 and 3, TCNQ⁻ monoanions and the corresponding cations form segregated stacks, which are regular in 1 but irregular in 3. Instead of segregated stacks, TCNQ⁻ monoanions in 2 form isolated π-dimers. In the crystals of 4, two crystallographic independent TCNQ species possess almost equal fractional negative charge (ca. −0.5). Two types of TCNQ species form a tetrad, these tetrads make a TCNQ stack with the pattern …BAAB…BAAB… along the crystallographic a-b direction. The magnetisms for 1-4 can be simply explained by the formation of singlet spin state. A broken symmetry approach in a density functional theory framework at the ub3lyp/6-31 g level was used to calculate the magnetic exchange constants in 1-4. The results qualitatively demonstrate the observed magnetic properties.     

Synthesis, crystal structure and photoconductivity of new molecular complex of C60 with tetrabenzo(1,2-bis[4H-thiopyran-4-ylidene]ethene): Bz4BTPE C60

A new molecular complex of C₆₀ with tetrabenzo(1,2-bis[4H-thiopyran-4-ylidene]ethene), Bz₄BTPE C₆₀ (1) has been obtained. The complex has a layered structure in which closely packed hexagonal layers of C₆₀ alternate with the layers composed of Bz₄BTPE molecules. The complex has a neutral ground state according to UV-vis-NIR spectrum. It has been found that single crystals of 1 show low ‘dark’ conductivity of σ∼10⁻¹⁰ (Ω cm)⁻¹. A 10² increase in photocurrent has been observed upon illuminating the crystal with white light. Photoconductivity of 1 is sensitive to magnetic field with B₀<1 T and increases up to 5% in magnetic field. The photoconductivity spectra of the complex indicate that free charge carriers are generated in the UV-visible range mainly by the Bz₄BTPE excitation (the peaks at 622, 562, 472 and 348 nm) with a possible contribution of charge transfer excitations between neighboring C₆₀ molecules (the peak at 472 nm).     

Magnetic and electronic properties of Cr- and Mn-doped SnO2: ab initio calculations

The ab initio calculations, based on the Korringa–Kohn–Rostoker (KKR) approximation method combined with the coherent potential approximation (CPA), indicated as KKR–CPA, have been used to study the stability of ferromagnetic and ferrimagnetic states, for systems that are SnO₂ doped and co-doped with two transition metals, that is, chromium and manganese. Our results indicate that the ferromagnetic state is more stable than the spin-glass state for the (Sn_1−xCr_xO₂; x = 0.07, 0.09, 0.12 and 0.15)-doped system, while the spin-glass state is more stable than the ferromagnetic state for the (Sn_1−xMn_xO₂; x = 0.02 and 0.05)-doped system. However, the ferromagnetic and/or the ferrimagnetic states are stable for the (Sn_0.98−xMn_0.02Cr_xO₂; x = 0.05, 0.09 and 0.13)-doped system depending on the Cr concentration. Moreover, we estimated the Curie temperature (T_c) for the Cr-doped tin dioxide (SnO₂), and we explained the origin of magnetic behaviour through the total density of states for different doped and co-doped SnO₂ systems.     

A new quasi-one-dimensional molecular solid based on Ni(mnt)2 anion: Crystal structure and spin-gap transition

A new molecular solid, [1-(4′-bromo-2′-fluorobenzyl)-4-dimetylaminopyridinium]-bis(maleonitriledithiolato)nickel(III), (BrFBzPyN(CH₃)₂(Ni(mnt)₂)(1), has been prepared and characterized by elemental analyses, IR, ESI-MS spectra, single crystal X-ray diffraction and magnetic measurements. Compound 1 crystallizes in the orthorhombic space group Pnma, a=20.579(4) Å, b=7.078(1) Å, c=17.942(4) Å, α=β=γ=90°, V=2613.3(9) Å³, Z=4. The Ni(III) ions of 1 form a quasi-one-dimensional Zigzag magnetic chain within a Ni(mnt)₂⁻ column through Ni?S, S?S, Ni?Ni, or π?π interactions with an Ni?Ni distance of 4.227 Å. Magnetic susceptibility measurements in the temperature range 2-300 K show that 1 exhibits a spin-gap transition around 200 K, and antiferromagnetic interaction in the high-temperature phase (HT) and spin gap in the low-temperature phase (LT). The transition for 1 is second-order phase transition as determined by DSC analyses.     

Photophysics of mixed ligand complexes of ruthenium(II) with 2,2′-bipyridyl and phosphines

Luminescence of mixed ligand complexes of ruthenium(II) of the types cis-Ru(bpy)₂X₂(I), cis-[Ru(bpy)₂(PPh₃)X](BF₄)(II), and cis-Ru(bpy)(PP)X₂(III) (X = CN, NO₂, PPh₃ is triphenyl phosphine; PP is 1,2-bis(diphenylphospino)ethane (dppe) and cis-,2-bis(diphenylphosphino)ethylene (dppene)) is studied in alcohol matrices (EtOH/MeOH, 4:1) frozen at 77 K. A sequence of complexes I–III exhibits an additive (in the number of phosphorous atoms) blue shift of the absorption and luminescence bands and an increase in the quantum yield of luminescence and in the excited-state lifetime. The rate constant of nonradiative deactivation of the excited state decreases more than by an order of magnitude in the sequence I–III of cyano complexes and only by three times in a sequence of nitro complexes. This is assumed to be caused by a specific (in the hydrogen bond type) interaction of nitro groups of complexes with a proton solvent.     

Three green luminescent cadmium complexes containing 8-aminoquinoline ligands: Syntheses, crystal structures, emission spectra and DFT calculations

Three complexes, Cd(8-aminoql)₂×₂ (8-aminoql=8-aminoquinoline; X⁻=ClO₄⁻, SCN⁻, 1 and 2, respectively) and Cd(8-aminoql)(N₃)₂ (3), were synthesized and structurally characterized. For each complex, the Cd²⁺ ion exhibits distorted octahedral coordination geometry. Two 8-aminoquinoline molecules and two counter-anions are coordinated to the Cd²⁺ center to form a mononuclear species with two trans-ClO₄⁻ anions for 1, while two SCN⁻ anions adopt a cis-configuration for 2. The intermolecular H-bonding interactions between the -NH₂ groups and the O atom (1) and the S atom (2) result in the formation of a 2-D layered structure. In the crystal of 3, the N₃⁻ anions bridging the neighboring Cd(8-aminoql)²⁺ units form a 1-D coordination polymer. The three complexes emit green luminescence. The emission bands possess a broad asymmetric feature, which can be assigned to L′LCT transitions based on DFT and TDDFT calculations.     

Eu(III) and Tb(III) luminescent lanthanide systems derived from DTPA-bisamide and DTTA-based ligands incorporating bipyridine antenna

Four new polycarboxylate ligands H₃Lⁿ have been synthesized by the attachment of two or one 2,2′-bipyridine subunits onto a diethylenetriamine pentacarboxylic acid (DTPA-bisamide derivatives: H₃L¹, H₃L²) or a diethylenetriamine tricarboxylic acid (DTTA derivatives: H₃L³, H₃L⁴) core. The neutral Eu^III and Tb^III complexes of these chelates have been prepared and studied from their UV-vis and luminescence data. The main photophysical characteristics of these complexes, i.e. the absorption and luminescence spectra, the metal-centred lifetimes and the overall luminescence yields (Φ) were measured in buffered aqueous solutions. In addition the role played by non-radiative paths (vibrational energy transfer involving coordinated water molecules, involvement of ligand-to-metal charge-transfer excited states, or metal→ligand back-transfer) was investigated. In all complexes, we found that the bidentate bipyridine chromophore is not coordinated to the lanthanide ion, allowing one (LnL¹, LnL²) or two (LnL³, LnL⁴) water molecules to penetrate the first coordination sphere of the metal. Although the bipyridine chromophore behaves as remote (from the binding site) light-harvesting unit for the lanthanide ion in these systems, a sizeable sensitization of the Eu- and Tb-centred luminescence can be effective (LnL², LnL³, Φ=16-19% in aerated D₂O solutions). Our photophysical investigations show that overall non-radiative deactivation is not dependant of thermally activated non-radiative channels but the efficiency of the ligand→Ln intramolecular energy transfer has to be taken into account to explain the obtained results.     

Optical oxygen sensing materials based on trinuclear starburst ruthenium(II) complexes assembled in mesoporous silica

The preparation and oxygen sensing properties of optical materials based on two trinuclear starburst ruthenium(II) complexes: [Ru₃(bpy)₆(TMMB)]⁶⁺ (1) and [Ru₃(phen)₆(TMMB)]⁶⁺ (2) (bpy=2,2′-bpyridine, phen=1,10-phenathroline, TMMB=1,3,5-tris[2-(2′-pyridyl)benzimidazoyl]methylbenzene) assembled in two mesoporous silicate (MS) are described in this paper. The luminescence of Ru complexes/silicate assemble materials can be quenched by molecular oxygen with good sensitivity (I₀/I₁>5 for 2/MS and I₀/I₁>3 for 1/MS), indicating that trinuclear starburst Ru(II) complexes/MS systems are sensitive to oxygen molecules.     

Surface-modification of TiO2 with new metalloporphyrins and their photocatalytic activity in the degradation of 4-notrophenol

A new mono-functionalized porphyrin derivative, 5-mono-[4-(2-(4-hydroxy)-phenoxy)ethoxy]-10,15,20-triphenylporphyrin (3) and its Cu(II) (3a), Zn(II) (3b) and Ni(II) (3c) metalloporphyrins were synthesized and characterized by using various spectroscopic techniques. The corresponding 3a, 3b, 3c-TiO₂ photocatalysts were then prepared and characterized by means of FT-IR and diffused reflectance spectra, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic activities of 3a, 3b, 3c-TiO₂ were investigated by testing the photodegradation of 4-nitrophenol (4-NP) in aqueous solution under the halogen lamp irradiation. The results indicated that all the 3a, 3b, 3c enhanced the photocatalytic efficiency of bare TiO₂ in photodegrading the 4-NP, and 3a-TiO₂ exhibited the highest photocatalytic activity. The result is considered a combined action of potential match of 3a with TiO₂ CB and effective impregnated of 3a onto the surface of TiO₂.     

EPR study of Cu(II) dopant ions in single crystals of bis(l-asparaginato)Zn(II)

We report an electron paramagnetic resonance (EPR) study at 33.9 GHz and room temperature of oriented single crystal samples of bis(l-asparaginato)Zn(II) doped with Cu(II). The variation of the spectra with magnetic field orientation was measured in three crystal planes (a*b, bc and a*c, with a*=b×c). These spectra display two groups of four peaks arising from the hyperfine interaction with the I_Cu=3/2 nuclear spins of copper. They were assigned to Cu(II) ions in two lattice sites related by a 180° rotation around the b-crystal axis. The g and hyperfine coupling (A) tensors of the Cu(II) ions were evaluated from the single crystal data. Some indeterminacy in the assignment of the signals was avoided measuring the EPR spectrum of a powder sample. Their principal values are g₁=2.060(1), g₂=2.068(2), g₃=2.283(2), and A₁≈0.1×10⁻⁴, A₂=13×10⁻⁴ and A₃=165×10⁻⁴ cm⁻¹. The eigenvectors corresponding to g₃ and A₃ are coincident within the experimental error; the other eigenvectors are rotated 5.6° in the perpendicular plane. Considering the crystal structure of bis(l-asparaginato)Zn(II), our EPR results indicate that the Cu(II) impurities replace Zn(II) ions in the host crystal. We propose a molecular model based on the EPR data and the structural information, and analyse the results comparing the measured values with those obtained in similar systems.     

Photophysics of the adsorbed bipyridyl complexes of ruthenium(II) with phosphines

Luminescence of the ruthenium(II) complexes cis-Ru(bpy)₂(CN)₂ (I), cis-[Ru(bpy)₂(PPh₃)CN](BF₄) (II), and cis-Ru(bpy)(dppe)(CN)₂ (III)[bpy=2.2′-bipyridyl, PPh₃=triphenylphosphine, dppe=1,2-bis(diphenylphosphino)ethane], adsorbed on silicon oxide (Aerosil) were studied at a temperature of 77 K. The luminescence spectra, decay times, and quantum yields were measured, and the intermolecular rate constants of radiative transitions and nonradiative decay of the excited electronic state with the metal-to-ligand charge transfer (MLCT) were determined. It is found that the adsorption of the complex is accompanied by a decrease in the energy of the radiative MLCT state and by a considerable acceleration of its nonradiative decay. It is concluded that the interaction of the complexes with the surface adsorption centers occurs via formation of a strong hydrogen bond with a hydroxyl-hydrate cover, the interaction of complexes in the ³MLCT state being stronger than in the ground state. The additive (in the number of phosphorus atoms coordinated to the central ruthenium ion), a shift of the absorption and luminescence bands to shorter wavelengths in the sequence of complexes I–III, is retained when the complexes transform from solutions to the absorbed state.     

Correlation between adsorption and thermal properties of lanthanide(III) dinicotinates

Structural and thermal properties of the two isostructural lanthanide metal-organic frameworks: [Er₂(pdc)₃(dmf)₂]·dmf (1) and [Tm₂(pdc)₃(dmf)₂]·dmf (2) where pdc = C₅H₃N(COO)₂²⁻ and dmf = N,N′-dimethylformamide, have been investigated. They are characterized by the BET surface area of 302 and 101 m²/g for 1 and 2, respectively. This paper deals with the influence of activation conditions on sorption properties of the investigated complexes. Thermal investigations of as-made and activated complexes point to their entirely different thermal decompositions.     

Intermolecular photoinduced electron-transfer processes between C60 and aniline derivatives in benzonitrile

The quenching behavior of the triplets of C₆₀ by various aniline derivatives (1a-d and 2a-e) was investigated by means of laser flash photolysis in benzonitrile at 293 K. Electron transfer process was proposed to be the main mechanism because of the direct detection of radical ions of aniline derivatives and C₆₀ in time-resolved transient absorption spectra. The quenching rate constants (k_q) of by different substrates determined at 740 nm approach or reach the diffusion-controlled limit. DFT method was employed to calculate the unknown oxidation potentials of substrates in solution. With these E_ox values, free energy changes (ΔG) were obtained through Rehm-Weller equation. Dependence of observed quenching rate constants on the free energy changes further indicates the photoinduced reactions between ³C₆₀^* and substrates proceed through an electron transfer mechanism. Obtained k_q values for the aniline derivatives are impacted obviously by ground-state configurations and the kinds substituents quantified by Hammett σ constant. Good correlation between log k_q and σ values conforms to the empirical Hammett equation. A more negative ρ value (−3.356) was gained for anilines (2a-e) than that of N,N-dimethylanilines (1a-d) (−1.382), which suggests a more susceptible reactivity for the former substrates. Charge density distribution of reaction center “N” originated from quantum calculation supports this suggestion. In addition, a relationship between quenching rate constants and solvent viscosity was gained from C₆₀/dimethyl-p-toluidine system in altered mixtures of acetonitrile and toluene.     

The crystal structure and magnetic properties of the 1-dimensional dihalide-bridged polymers dichlorobis(thiazole)cobalt(II) and dibromobis(thiazole)-cobalt(II)

The isostructural polymeric compounds Co(thiazole)₂X₂ (X=Cl (1), Br(2)) have been synthesised by the addition of thiazole to an ethanolic solution of the corresponding anhydrous cobalt halide. Powder X-ray and neutron diffraction measurements were used for structural determination. The structures were determined using powder neutron diffraction data and Rietveld techniques: (1) C2/c, a=17.806(2) Å, b=3.6806(6) Å, c=14.807(3) Å, β=94.78(1)°, V=967.1(3) ų, Z=4; (2) C2/c, a=18.079(3) Å, b=3.8138(8) Å, c=15.022(4) Å, β=92.71(1)°, V=1034.6(4) ų, Z=4. Each linear polymer chain is composed of pseudo-octahedral, high-spin Co²⁺ centres, doubly linked by halide bridges. Magnetisation measurements of 1 and 2 at 5 K between 0 and 10 kG reveals a metamagnetic transition between antiferromagnetic and ferromagnetic states. Low temperature susceptibility data have been fitted to a one-dimensional Ising model with a mean field correction and were found to be anisotropic with ferromagnetic intrachain interactions along the b-axis and weaker antiferromagnetic interchain interactions.     

Synthesis, characterization and optical limiting effect of nickel complexes of multi-sulfur 1,2-dithiolene

Three nickel complexes with a new multi-sulfur 1,2-dithiolene ligand, (n-Bu₄N)[Ni(cddt)₂] 1, (Ph₄P)[Ni(cddt)₂] 2 and [Ni(cddt)₂] 3 (cddt=4a, 6, 7, 7a-5H-cyclopenta[b]-1,4-dithiin-2,3-dithiolate), have been synthesized and characterized by electrochemical measurements, IR, EPR and UV-Vis-NIR spectroscopies. The crystal structure of complex 2 is determined. Their optical nonlinearities are measured by the Z-scan technique with an 8 ns pulsed laser at 532 nm and all exhibit NLO absorptive abilities. Complexes 1 and 2 both exhibit effective self-defocusing performance (n₂=−5.81×10⁻¹⁰ esu for 1 and −4.51×10⁻¹⁰ esu for 2). The optical limiting (OL) effects were observed with nanosecond and picosecond laser pulses. The OL capability of complex 3 is superior to C₆₀ at the same experimental condition in ns measurements.     

Structural and luminescence studies of trivalent europium complexes with pentaethylene glycol and 18-crown-6 ligands in the presence of picrate anion

Two new isostructural complexes of europium picrate (Eu-Pic) with pentaethylene glycol (EO5) and 18-crown-6 (18C6) ligands formed complexes of molecular formula [Eu(Pic)₂(18C6)]⁺(Pic)⁻I and [Eu(Pic)₂(EO5)]⁺(Pic)⁻II have been isolated and characterised. Compound I showed 10-coordination number through six oxygen atoms from the 18C6 ligand and two bidentate picrate anions. Meanwhile, compound II exhibited 9-coordination number via six oxygen atoms from EO5 ligand, two oxygen atoms from a bidentate and one oxygen atom from monodentate picrate anions. Photoluminescence (PL) spectra of the solid-state europium complexes display sharp lines which are assigned to ⁵D₀→⁷F_0-4 and ⁵D₁→⁷F_1,2,4 transitions. No emission of polyether ligands is observed, indicating that the energy transfer from the polyether ligands to the Eu³⁺ ion is quite efficient. The PL spectra of [Eu(Pic)₂(OH₂)₆]⁺(Pic)⁻·6H₂O III, [Eu(NO₃)₃(OH₂)₃]·(18C6) IV, [Eu(NO₃)₃·6H₂O] V and Eu₂O₃VI are also observed. Compounds I-IV exhibited high Ω₂ intensity parameter values, namely 16.93, 10.23, 17.10 and 12.35 (in units of 10⁻²⁰ cm²), respectively. These relatively high values reflect the hypersensitive behaviour of the ⁵D₀→⁷F₂ transition and indicate that the Eu³⁺ ion is located in a highly polarisable chemical environment.     

A Pulsed EPR and DFT Investigation of the Stabilization of Coordinated Phenoxyl Radicals in a Series of Cobalt Schiff-Base Complexes

We recently demonstrated how the aerobic addition of acetic acid to N,N′-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane-diamino Co^II, [Co(1)], leads to the formation of an unusual coordinated Co^III-phenoxyl radical. In this work, some of the structural aspects associated with the Schiff-base-derived ligand (1) that are crucial for the acid-mediated formation of the phenoxyl radical are investigated. For comparison with [Co(1)], we therefore studied the influence of acetic acid on two complexes: (1) the N,N′-bis(3,5-di-tert-butylsalicylidene)-1,2-ethane-diamino Co^II complex, [Co(2)], that lacks the cyclohexyl group of [Co(1)], and (2) the N′-disalicylidene-ethylenediamine Co^II salen complex, [Co(3)], that lacks both the tertiary butyl groups and the cyclohexyl groups. It is shown that the cyclohexyl group of [Co(1)] is not involved in the formation or stabilization of the phenoxyl radical, whereas the tertiary butyl groups of [Co(1)] play a crucial role. In addition, the characteristics of the phenoxyl radical, formed after aerobic addition of acetic acid to [Co(2)], are analyzed in detail by pulsed electron paramagnetic resonance, in combination with isotopic labeling. The experimental data are compared to density functional theory computations and to previous data on the acid-mediated phenoxyl radical of [Co(1)].