Nuclear-Electron Overhauser Effect in MC800 Liquid Asphalt Solutions

Experimental results on the extrapolated ultimate enhancement factors of o-, m-, and p-xylene protons at 1.53 mT are obtained for MC800 asphalt solutions. The ultimate enhancement factors are found such as ?26.9, ?25.7, and ?11.7 for o-, m-, and p-xylene, respectively. These results show that the solvent proton Overhauser effect cannot reach the extrapolated enhancement of ?330 in the extreme narrowing case because of occurrence of small scalar interactions in addition to the dipole–dipole interactions between solvent protons and asphalt electrons. The ortho, meta, and para positions of the –CH₃ group change the nature of the interactions. The nuclear magnetic resonance (NMR) signal enhancements exhibit a sensitive behavior depending on the chemical environment differing from isomer to isomer. The solvation or association of asphalt in xylene isomers at room temperature is revealed. Quantum chemical calculations for the xylene isomers with the electronic and optical properties; absorption wavelengths, excitation energy, atomic charges, dipole moment and frontier molecular orbital energies, molecular electrostatic potential; are carried out using the density functional theory (DFT) method (B3LYP) with the 6-311G(d,p) basis set by the standard Gaussian 09 software package program. The relative importance of scalar and translational dipolar interaction parameters determined in dynamic nuclear polarization experiments is explained by the electronic structure of HOMO–LUMO of the xylene isomers.     

Differentiation and quantification of xylene isomers by combining headspace solid-phase microextraction/gas chromatography and self-ion molecule reaction in an ion trap tandem mass spectrometry

A headspace solid-phase microextraction (HS-SPME) method using polydimethylsiloxane (PDMS)-coated fiber coupling with GC/self-ion molecule reaction (SIMR)/MS/MS (GC/SIMR/MS/MS) has been developed for the differentiation of o-, m-, and p-xylene isomers. The optimization parameters of this method are: extraction time 20 min, stirring rate 1200 rpm, sampling temperature 28 degrees C, and salt concentration 5%. The LODs were found to be in the range of 3-9 ng/mL under the SIM mode of GC/MS. The RSDs were below 1% (n=5). The linear dynamic range of the calibration curve was from 0.05 to 10.0 microg/mL with correlation coefficient (r2)>0.9089. The advantages of this technique are sensitive, selective, ease of operation, simple device, solvent free, and extremely little sample consumption. This technique is the first example using SIMR combined MS/MS applied in the GC/MS and it can be applied to other volatile compounds for future application.     

The enthalpies of formation of o-, m-, and p-benzoquinone: gas-phase ion energetics, combustion calorimetry, and quantum chemical computations combined

Radical anions of o-, m-, and p-benzoquinone were produced in a Fourier transform mass spectrometer by low energy electron attachment or collision-induced dissociation and were differentiated. Classical derivatization experiments also were carried out to authenticate the ortho and meta anions. Gas-phase techniques were used to measure the proton affinities of all three radical anions and the electron affinities of o- and m-benzoquinone. By combining these results in thermodynamic cycles, we derived heats of hydrogenation of o-, m-, and p-benzoquinone (Delta(hyd)H degrees (1o, 1m, and 1p) = 42.8 +/- 4.1, 74.8 +/- 4.1, and 38.5 +/- 3.0 kcal mol(-)(1), respectively) and their heats of formation (Delta(f)H degrees (1o, 1m, and 1p) = -23.1 +/- 4.1, 6.8 +/- 4.1, and -27.7 +/- 3.0 kcal mol(-)(1), respectively). Good accord with the literature value for the para derivative was obtained. Combustion calorimetry and heats of sublimation also were measured for benzil and 3,5-di-tert-butyl-o-benzoquinone. The former heat of formation agreed with previous determinations, while the latter result (Delta(f)H degrees (g) = -73.09 +/- 0.87 kcal mol(-)(1)) was transformed to Delta(f)H degrees (1o) = -18.9 +/- 2.2 kcal mol(-)(1) by removing the effect of the tert-butyl groups via isodesmic reactions. This led to a final value of Delta(f)H degrees (1o) = -21.0 +/- 3.1 kcal mol(-)(1). Additivity was found to work well for m-benzoquinone, but BDE1 and BDE2 for 1,2- and 1,4-dihydroxybenzene differed by a remarkably small 14.1 +/- 4.2 and 23.5 +/- 3.7 kcal mol(-)(1), respectively, indicating that o- and p-benzoquinone should be excellent radical traps.     

Separation and determination of some stereoisomers by capillary gel electrophoresis with cyclodextrin incorporated in polyacrylamide gel

Capillary gel electrophoresis (CGE) was successfully applied to the separation of optically active isomers and position isomers by incorporating a suitable cyclodextrin chiral selector in polyacrylamide gel. A commercially available ss-cyclodextrin (ss-CD) was used for enantioselectivity towards o-, m- and p-nitrobenzoic acid, o-, m- and p-hydroxybenzoic acid, o-, m- and p-toluic acid and the optical isomers of dansyl-D,L-leucine and R,S-1,1'-binaphthyl-2,2-dihydrogenphosphate. Especially the effect of organic solvents, such as acetonitrile, methanol, dimethylsulphoxide and others were examined in detail. The resolution varied to some extent with the addition of the organic solvent to the polyacrylamide gel and the running buffer solution. The possible mechanism has also been discussed. In addition, quantitative aspects of the separation of stereoisomers using CGE have been studied, showing that both the resolution and accuracy of the determinations were affected by the ratio of the enantiomers.     

Diffusion in mesoporous materials and polymers swelling: a transient calorimetric approach

The diffusion of water and benzene has been followed by DSC using the thermoporosimetry (TPM) approach. The diffusion of water has been observed during the drying of a water impregnated mesoporous silica gel at 40 degrees C under dry air. It was found that the confinement affects the evaporation rate of water. The diffusion of benzene has been observed during the drying and the swelling of a cross linked PDMS sample. The mesh size distributions (MSD) of the elastomer, during swelling and drying, have been calculated at various times using the TPM formalism. Extrapolating the mean mesh size of the polymeric network, it was found that the dry polymer has an average mesh of about 2.5 nm.     

苯乙烯与邻、间、对-二甲苯二元混合液的分子间相互作用

The densities (ρ), ultrasonic speeds (v), and refractive indices (n) of binary mixtures of styrene (STY)with m-, o-, or p-xylene, including those of their pure liquids, were measured over the entire composition range at the temperatures 298.15, 303.15, 308.15, and 313.15 K. The excess volumes (VE), deviations in isentropic compressibilities(△ks), acoustic impedances (△Z), and refractive indices (△n) were calculated from the experimental data. Partial molar volumes (V0φ,2) and partial molar isentropic compressibilities (K0φ,2) of xylenes in styrene have also been calculated. The derived functions, namely, VE, △ks, △Z, △n, V0φ,2, and K0φ,2 were used to have a better understanding of the intermolecular interactions occurring between the component molecules of the present liquid mixtures. The variations of these parameters suggest that the interactions between styrene and o-, m-, or p-xylene molecules follow the sequences: p-xylene＞o-xylene＞m-xylene. Apart from using density data for the calculation of VE, excess molar volumes were also estimated using refractive index data. Furthermore, several refractive index mixing rules have been used to estimate the refractive indices of the studied liquid mixtures theoretically. Overall, the computed and measured data were interpreted in terms of interactions between the mixing components.     

Separation and determination of some stereoisomers by capillary gel electrophoresis with cyclodextrin incorporated in polyacrylamide gel

Capillary gel electrophoresis (CGE) was successfully applied to the separation of optically active isomers and position isomers by incorporating a suitable cyclodextrin chiral selector in polyacrylamide gel. A commercially available ß-cyclodextrin (ß-CD) was used for enantioselectivity towards o-, m- and p-nitrobenzoic acid, o-, m- and p-hydroxybenzoic acid, o-, m- and p-toluic acid and the optical isomers of dansyl-D,L-leucine and R,S-1,1-binaphthyl-2,2-dihydrogenphosphate. Especially the effect of organic solvents, such as acetonitrile, methanol, dimethylsulphoxide and others were examined in detail. The resolution varied to some extent with the addition of the organic solvent to the polyacrylamide gel and the running buffer solution. The possible mechanism has also been discussed. In addition, quantitative aspects of the separation of stereoisomers using CGE have been studied, showing that both the resolution and accuracy of the determinations were affected by the ratio of the enantiomers.     

气相色谱法测量聚苯乙烯——挥发组分二元系统中挥发组分在无限稀时的活度系数

溶液中各组分的活度系数及其随温度的变化,是与溶液性质有关的基本物理化学数据,它反映出溶液中溶剂分子和溶质分子之间的相互作用,是研究溶液性质所不可少的。对于高聚物溶液性质的了解,溶液中各组分活度系数的测定也是必要的工作,但迄今在这方面的工作不多,我们认为有必要弥补这一缺陷。     

Matrix isolation investigation of the photochemical reaction of methyl-substituted benzenes with CrCl2O2

The matrix isolation technique, combined with infrared spectroscopy, has been used to characterize the products of the photochemical reactions of toluene, m-, o-, and p-xylene, mesitylene, and hexamethylbenzene with CrCl2O2. While initial twin jet deposition of the reagents led to no visible changes in the recorded spectra, strong product bands were noted following irradiation with light of lambda > 300 nm. The irradiation was shown to lead to oxygen atom transfer, forming complexes between methylcyclohexadienone derivatives and CrCl2O. With the xylenes and mesitylene, di- and trimethylphenols, complexed to CrCl2O, were also observed, respectively. This latter result arises from C-H bond activation and oxygen atom insertion into a C-H bond. The identification of the complexes was further supported by isotopic labeling (2H) and by density functional calculations at the B3LYP/6-311G++(d,2p) level. Product distributions were rationalized by an analysis of the electron density distribution.     

气相色谱法测量聚苯乙烯——挥发组分二元系统中挥发组分在无限稀时的活度系数

Activity coefficients of hexane, heptane, methyl cyclo-hexane, benzene, toluene, ethyl benzene, o-, m-, p-xylene at infinite dilution in polystyrene-volatile component systems are determined by GLPC method. The relation may be expressed as following equation:with an error less than 5 % to the experimental data.     

Distinguishing by principal component analysis of o-xylene, m-xylene, p-xylene and ethylbenzene using electron ionization mass spectrometry

The possibility of distinguishing between o-, m-, p-xylene and ethylbenzene on the basis of only their 70 eV electron ionization (EI) mass spectra has been investigated. These four isomers were distinguished by principal component analysis (PCA) of respective EI mass spectra (recorded under identical conditions). Considered mass spectra contained either eleven or five m/z values, which had intensity greater than 5% or 10% of base peak, respectively.     

Reaction of functionalized anilines with dimethyl carbonate over NaY faujasite. 3. chemoselectivity toward mono-N-methylation

In the presence of NaY faujasite, dimethyl carbonate (MeOCO(2)Me, DMC) is a highly chemoselective methylating agent of functionalized anilines such as aminophenols (1), aminobenzyl alcohols (2), aminobenzoic acids (3), and aminobenzamides (4). The reaction proceeds with the exclusive formation of N-methylanilines without any concurrent O-methylation or N-/O-methoxy carbonylation side processes. Particularly, only mono-N-methyl derivatives [XC(6)H(4)NHMe, X = o-, m-, and p-OH; o- and p-CH(2)OH; o- and p-CO(2)H; o- and p-CONH(2)] are obtained with selectivity up to 99% and isolated yields of 74-99%. DMC, which usually promotes methylations only at T > 120 degrees C, is activated by the zeolite catalyst and it reacts with compounds 1, 2, and 4, at 90 degrees C. Aminobenzoic acids (3) require a higher reaction temperature (> or =130 degrees C).     

Effect of pressure on the solubilities ofo-,m- andp-xylene in water

The solubilities of o-, m- and p-xylene in water were measured at 25.0°C up to 250, 385, and 50 MPa, respectively. The solubility increased with increasing pressure up to 120 MPa (50 MPa for p-xylene) and then decreased. The reaction volumes, V^o accompanying the dissolution at 0.1 MPa were estimated as –3.6±0.5, –3.4±0.5, and –4.1±0.5 cm³-mol^–1 for o-, m-, and p-xylene, respectively, from the pressure dependences of the solubilities. The limiting partial molar volumes, of p- and o-xylene in water under high pressure were estimated from V^o and the molar volume of the xylene. The partial molar volumes decreased with increasing pressure. The reaction volume for the formation of intra-molecular pairwise hydrophobic interaction between the methyl groups, as proposed by Ben-Naim, is discussed for the V^o of p- and o-xylene at 0.1 MPa.     

Molar excess volumes of furfuryl alcohol and aromatic hydrocarbons at 25°C

Molar excess volumes of mixing V^E for binary mixtures of furfuryl alcohol with the aromatic hydrocarbons benzene, toluene, ethylbenzene, and o-, m-, and p-xylene were determined for the entire composition range at 25°C. V^E was negative for the mixtures containing benzene, toluene and pxylene but positive for mixtures containing ethylbenzene and o- and m-xylene. The results are discussed in terms of specific interaction present in the binary mixture and are compared with those previously reported for tetrahydrofuran, fur an or furfural binary mixtures with aromatic hydrocarbons.     

Photodissociation dynamics of ethyltoluene and p-fluoroethylbenzene at 193 and 248 nm

Photodissociation of jet-cooled o-, m-, and p-ethyltoluene and p-fluoroethylbenzene at both 193 and 248 nm was studied separately using vacuum ultraviolet photoionization/multimass ion imaging techniques. Dissociation occurs exclusively through alkyl chain C-C bond cleavage. The measured photofragment translational energy distributions at 193 nm decrease monotonically with increasing translational energy. The distributions indicate that dissociation occurs from the ground electronic state after internal conversion. However, the photofragment translational energy distributions from o-, m-, and p-ethyltoluene obtained at 248 nm contain a slow and a fast component; the ratios between these components are 1:4, 1:1.3, and 1:6, respectively. On the other hand, only the slow component was observed from p-fluoroethylbenzene at 248 nm. The fast components are attributed to the dissociation from the triplet state after intersystem crossing, and the slow components result from the dissociation in the ground electronic state. Comparison with the photodissociation of benzene and toluene and ab initio calculation has been made.     

Equilibrium Ion Pair Acidities of Polyhalogenated Benzenes in THF. Extrapolation to Benzene(1)

The equilibrium cesium ion pair acidities of six polyfluorobenzenes at 25 degrees C and six polychlorobenzenes at -20 degrees C were determined in THF. For fluorinated benzenes the additive (negative) effects of fluorine on pK (partial equilibrium factors) are o = 5.2, m = 3.0, and p = 1.4. From these the cesium ion pair pK (per H) of benzene is extrapolated to be 44.8 at 25 degrees C. For chlorobenzenes the additive contributions for o-, m-, and p-chlorine are 4.2, 2.7, and 2.1, respectively. The corresponding pK of benzene is 47.0 at -20 degrees C. Aggregation studies show that in the concentration range 10(-)(3)-10(-)(4) M the cesium salt of 1,2,4,5-tetrachlorobenzene and the cesium and lithium salts of 1,2,4,5-tetrafluorobenzene are monomeric. The pK of benzene on the Li scale is extrapolated to be 39.5.     

Coupling of an aldehyde or ketone to pyridine mediated by a tungsten imido complex

The reactivity of W(NPh)(o-(Me3SiN)2C6H4)(py)2 and W(NPh)(o-(Me3SiN)2C6H4)(pic)2 (py=pyridine; pic=4-picoline) with unsaturated substrates has been investigated. Treatment of W(NPh)(o-(Me3SiN)2C6H4)(py)2 with diphenylacetylene or 2,3-dimethyl-1,3-butadiene generates W(NPh)(o-(Me3SiN)2C6H4)(eta2-PhCCPh) and W(NPh)(o-(Me3SiN)2C6H4)(eta4-CH2=C(Me)C(Me)=CH2), respectively, while the addition of ethylene to W(NPh)(o-(Me3SiN)2C6H4)(py)2 generates the known metallacycle W(NPh)(o-(Me3SiN)2C6H4)(CH2CH2CH2CH2). The addition of 2 equiv of acetone to W(NPh)(o-(Me3SiN)2C6H4)(pic)2 provides the azaoxymetallacycle W(NPh)(o-(Me3SiN)2C6H4)(OCH(Me)2)(OC(Me)2-o-C5H3N-p-Me), the result of acetone insertion into the ortho C-H bond of picoline. Similarily, the addition of 2 equiv of RC(O)H [R=Ph, tBu] to W(NPh)(o-(Me3SiN)2C6H4)(py)2 generates W(NPh)(o-(Me3SiN)2C6H4)(OCH2R)(OCHR-o-C5H4N) [R=Ph, tBu,]. In contrast, reaction between W(NPh)(o-(Me3SiN)2C6H4)(py)2 and 2-pyridine carboxaldehyde yields the diolate W(NPh)(o-(Me3SiN)2C6H4)(OCH(C5H4N)CH(C5H4N)O). The synthesis of W(NPh)(o-(Me3SiN)2C6H4)(PMe3)(py)(eta2-OC(H)C6H4-p-Me), formed by the addition of p-tolualdehyde to a mixture of W(NPh)(o-(Me3SiN)2C6H4)(py)2 and PMe3, suggests that an eta2-aldehyde intermediate is involved in the formation of the azaoxymetallacycle, while the isolation of W(NPh)(o-(Me3SiN)2C6H4)(Cl)(OC(Me)(CMe3)-o-C5H4N), formed by the reaction of pinacolone with W(NPh)(o-(Me3SiN)2C6H4)(py)2, in the presence of adventitious CH2Cl2, suggests that the reaction proceeds via the hydride W(NPh)(o-(Me3SiN)2C6H4)(H)(OC(Me)(CMe3)-o-C5H4N).     

Effect of temperature on the diffusion mechanism of xylene isomers in a FAU zeolite: a molecular dynamics study

The diffusion of o-, m-, and p-xylene in a FAU zeolite at 300-900 K was investigated using molecular dynamics simulations. Calculated self-diffusion coefficients of xylene isomers showed that the mobility of p-xylene was the fastest, m-xylene the second fastest, and o-xylene the slowest in the FAU zeolite at the same temperature. The diffusion activation energy of o-xylene, m-xylene and p-xylene was, respectively, determined to be 9.04, 7.45 and 6.44 kJ mol(-1) within the temperature range of 400 to 900 K, while to be 14.12, 13.59 and 15.47 kJ mol(-1) within the temperature range of 300 to 400 K. Xylene density profiles and orientational analysis suggested that this can be attributed to the xylene molecules that diffuse in the FAU zeolite by two different mechanisms at high and low temperatures. The behavior of motion for xylene in the FAU zeolite exhibits a "fluid-like" mode at high temperatures and exhibits a "jump-like" mode at low temperatures.     

Excited state hydrogen transfer in fluorophenol.ammonia clusters studied by two-color REMPI spectroscopy

Two-color (1 + 1') REMPI mass spectra of o-, m- and p-fluorophenol.ammonia (1 ration) clusters were measured with a long delay time between excitation and ionization lasers. The appearance of NH(4)(NH(3))(n-1)(+) with 100 ns delay after exciting the S(1) state is a strong indication of generation of long-lived species via S(1). In analogy with the phenol.ammonia clusters, we conclude that an excited state hydrogen transfer reaction occurs in o-, m- and p-fluorophenol.ammonia clusters. The S(1)-S(0) transition of o-, m- and p-fluorophenol.ammonia (1 : 1) clusters were measured by the (1 + 1') REMPI spectra, while larger (1 ration) cluster (n = 2-4) were observed by monitoring the long-lived NH(4)(NH(3))(n-1) clusters action spectra. The vibronic structures of m- and p-fluorophenol.ammonia clusters are assigned based on vibrational calculations in S(0). The o-fluorophenol.ammonia (1 : 1) cluster shows an anharmonic progression that is analyzed by a one-dimensional internal rotational motion of the ammonia molecule. The interaction between the ammonia molecule and the fluorine atom, and its change upon electronic excitation are suggested. The broad action spectra observed for the o-fluorophenol.ammonia (1 : n) cluster (n>== 2) suggest the excited state hydrogen transfer is faster than in m- and p-fluorophenol.ammonia clusters. The different reaction rates between o-, m- and p-fluorophenol.ammonia clusters are found from comparison between the REMPI and action spectra.     

二羰基二茂钛和酚类的反应: 合成二芳氧基二环戊二烯基钛的新途径

本文介绍在缓和条件下, 二羰基二茂钛和酚类反应是合成二芳氧基二环戊二烯基钛的新途径, 得到的新化合物都经过元素分析和^1HNMR测定。