Volumetric and conductometric studies on the interactions of dipeptides with sodium acetate and sodium butyrate in aqueous solutions at T = 298.15 K

Densities and conductivity data for the sodium carboxylate (sodium acetate and sodium butyrate)–dipeptides {(glycyl-l-glutamine and l-alanyl-l-glutamine) + water} systems were determined at T = 298.15 K. The apparent molar volumes of the peptides and the molar conductivity (Λ) of sodium acetate and sodium butyrate have been calculated. These data have been utilized to deduce the standard partial molar volumes (), standard partial molar volumes of transfer for dipeptide from water to aqueous sodium carboxylate solutions (Δ_tV^°), volumetric interaction coefficient, the limiting molar conductivity (Λ_°), and Walden product (Λ_°η). Both and Δ_tV^° for the dipeptides increase with increasing concentration of sodium carboxylate. The interpretation is that this result arises from the dominant interactions of the sodium carboxylate with the charged group and polar groups of peptides. The decrease in Λ_° of sodium carboxylate with increasing dipeptide concentration and nonconstant Walden product are attributed to the interactions of sodium carboxylate with peptide and friction resistance of the solvent medium.     

Syntheses of [F]5-fluoro-3-nitro-l-tyrosine

The detection of 3-nitro-l-tyrosine has been used as a biomarker of “reactive nitrogen species” in biological matrices and has been an ongoing challenge in analytical chemistry. In this work, fluorine-18 labelled 5-fluoro-3-nitro-l-tyrosine (FNT) was synthesized as a potential radiotracer to probe the biological fate of 3-nitro-l-tyrosine. The synthesis of []FNT was carried out by reaction of []3-fluoro-l-tyrosine with NaNO₃ in TFA solvent for 5 min at 4 °C. The radiochemical yield (RCY) of []FNT was 96±2% and []3-fluoro-l-tyrosine, was 29±1%, relative to []3-fluoro-l-tyrosine and []F₂, respectively. The syntheses of []FNT were also accomplished by direct fluorination of 3-nitro-l-tyrosine with []F₂ and by nitration of l-tyrosine with NaNO₃, followed by fluorination, in TFA (4 °C) or anhydrous HF (−65 °C) solvent. The latter two synthetic routes produced []FNT in 13.5±1.5% RCY, within 1 h. Products were characterized by use of , and NMR spectroscopy and mass spectrometry.     

Intermolecular/interionic interactions in l-isoleucine-, l-proline-, and l-glutamine-aqueous electrolyte systems

Speed of sound and density values for ternary systems (amino acid + salt + water): l-isoleucine/l-proline/l-glutamine in aqueous solutions of 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ have been measured for several concentrations of amino acids at different temperatures (303.15, 308.15, 313.15, 318.15, and 323.15 K). Using speed of sound and density data, the thermodynamic parameters such as isentropic compressibility (κ_s), change in isentropic compressibility (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility have been computed. The isentropic compressibility values decrease with increase in the amino acid concentration as well as with temperature. The decrease in κ_s values with increase in concentration of l-isoleucine/l-proline/l-glutamine in 1.5 M KCl, 1 M KNO₃, and 0.5 M K₂SO₄ has been ascribed to an increase in the number of incompressible zwitterions in solutions, and the formation of ‘zwitterions-ions’ and ‘zwitterions-water dipole’ entities in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax (a relaxational part of compressibility), which is dominant over the corresponding increase of κ_∞ (an instantaneous part of compressibility). The trends of variation of Δκ_s and Δκ_s/κ₀ with variations in solute concentration and temperature have also been discussed in terms of solute-solute and solute-solvent intermolecular/interionic interactions operative in the systems.     

Synthesis and structural study of copolymers of l-lactic acid and bis(2-hydroxyethyl terephthalate)

Poly(ethylene terephthalate)-poly(lactic acid) (PET-PLLA) copolyesters were synthesized by the melt reaction of bis(2-hydroxyethyl terephthalate) (BHET) with l-lactic acid oligomers (OLLA) in the presence of SnCl₂, H₂O-p-toluene sulfonic acid, H₂O catalytic system. The ¹H and ¹³C NMR studies confirm the incorporation of lactate units in PET chains after reaction. Copolyesters containing nearly equimolar terephthalate/lactate ratio are not completely random and present some block-copolymer character, while the microstructure of PET-rich copolyesters is a random one. Due to a longer PET sequence length, the latter exhibit a melting point close to 210 °C while the other ones are amorphous. SEC/MALDI-TOF MS off-line coupling was used to obtain the absolute average molar masses of the copolyesters. The results indicate that the conventional polystyrene calibration method leads to a strong overestimation of PET-PLLA molar masses, while the determined by NMR is much closer to the SEC/MALDI value.     

Glycine and l-glutamic acid-based dendritic gelators

Novel dendrons based on glycine and l-glutamic acid from the first generation (G1) to the third generation (G3) were synthesized and studied for their gelation properties by using transmission electron microscopy (TEM), atomic force microscopy (AFM), fluorescence, IR, circular dichroism (CD), and ¹H NMR spectroscopy. It was found that the gelation capability of these dendrons increased from the first generation (G1) to the third generation (G3), and that G3 exhibited the highest efficiency in forming gels. Both the focal and peripheral groups of dendrons had great effects on the formation of organogels. Hydrogen bonding and π-π stacking interactions were proved to be the main driving forces to form the fibrous networks at low concentrations (0.5 wt %). Small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) measurements indicate that the xerogels of the second generation (G2) from ethyl acetate and ethanol, and G3 xerogel from CH₂Cl₂ all display lamellar structures with the interlamellar spacing of ca. 36.0 Å for G2 and 40.5 Å for G3, respectively.     

Racemization behavior of l,l-lactide during heating

To control the depolymerization process of poly(l-lactic acid) into l,l-lactide for feedstock recycling, the racemization of l,l-lactide as a post-depolymerization reaction was investigated. In the absence of a catalyst, the conversion to meso-lactide increased with increase in the heating temperature and time at a higher rate than the conversion into oligomers. The resulting high composition of meso-lactide suggests that the direct racemization of l,l-lactide had occurred in addition to the known racemization mechanism that occurs on the oligomer chains. In the presence of MgO, the oligomerization rapidly proceeded to reach an equilibrium state between monomers and oligomers. The equilibrium among l,l-, meso-, and d,d-lactides was found to be a convergent composition ratio l,l-:meso-:d,d-lactides = 1:1.22:0.99 (wt/wt/wt) after 120 min at 300 °C. This composition ratio also indicates that in addition to the known racemization reaction on the oligomer chains, direct racemization among the lactides is also a frequent occurrence.     

Intermolecular/interionic interactions in l-leucine-, l-asparagine-, and glycylglycine-aqueous electrolyte systems

Ultrasonic velocity and density values have been measured for ternary systems (amino acid/di-peptide + salt + water): l-leucine/l-asparagine/glycylglycine each in 1.5 M aqueous solutions of NaCl or NaNO₃ or KNO₃ used as solvents for several concentrations of amino acids/di-peptide at different temperatures in the range of 298.15-323.15 K. The ultrasonic velocity values have been found to increase with increase in amino acids/di-peptide concentration and temperature in all the systems. The increase in ultrasonic velocity with increase in concentration has been discussed in terms of electrostatic interactions occurring between terminal groups of zwitterions (NH₄⁺ and COO⁻) and Na⁺, K⁺, Cl⁻, NO₃⁻ ions. The interactions of water dipoles with cations/anions and with zwitterions have also been taken into consideration. It has been observed that the ion-zwitterion and ion-dipole attractive forces are stronger than those of ion-hydrophobic repulsive forces. These interactions comprehensively introduce the cohesion into solutions under investigation. The cohesive forces are further enhanced on successive increases in solute concentration. Using ultrasonic velocity and density data, the parameters such as isentropic compressibility (κ_s), change (Δκ_s) and relative change (Δκ_s/κ₀) in isentropic compressibility, specific acoustic impedance (Z) and relative association (RA) have been computed. The isentropic compressibility values decrease with increase in the concentration of solutes as well as with temperature. The decrease in κ_s values with increase in concentration of l-leucine, l-asparagine and glycylglycine in 1.5 M aqueous solutions of NaCl, NaNO₃ and KNO₃ have been explained in terms of an increase in the number of incompressible molecules/zwitterions in solutions and the formation of compact zwitterions-water dipole and zwitterions-ions structures in solutions. The decrease in κ_s values with increase in temperature has been attributed to the corresponding decrease of κ_relax. (relaxational part of compressibility)_, which is dominant over the corresponding increase of κ_∞ (instantaneous part of compressibility). The trends of variations of Δκ_s, Δκ_s/κ₀, Z and RA with change of concentration and temperature have also been interpreted in terms of various intermolecular/interionic interactions existing in the systems.     

Synthesis and characterization of alkali-metal aryloxo compounds and their catalytic activity for l-lactide polymerization

Three new alkali-metal compounds stabilized by aryloxo groups were synthesized and fully characterized. The reactions of carbon-bridged bis(phenol)s MBMPH₂ (MBMPH₂ = 2,2′-methylene-bis(6-tert-butyl-4-methylphenol)) with sodium and potassium metals in tetrahydrofuran (THF) gave the desired alkali-metal complexes [MBMPNa₂(THF)₃]₂ (1) and [(MBMPK₂)₂(THF)₅]₂ (2), respectively, in high isolated yields. A similar reaction of aminophenol [HNOH] ([HNOH] = N-p-methyl-phenyl(2-hydroxy-3,5-di-tert-butyl)benzylamine) with sodium gave the monosodium salt [HNONa(THF)]₂ (3). Compounds 1-3 were well characterized, including X-ray structure determination. Compound 1 has a dimeric structure, and each sodium atom is four-coordinated with four oxygen atoms to form a distorted tetrahedron. Compound 2 has a centrosymmetric tetrameric structure. The coordination environments around the four potassium atoms are different. K1 is four-coordinated, K2 is three-coordinated, K3 is five-coordinated, whereas the coordination sphere of K4 is completed by one aryloxo oxygen atom and two oxygen atoms from two THF molecules and six carbon atoms from one arene ring of the bis(phenolate) ligand. Compound 3 has a dimeric structure, and each of the sodium atoms is four-coordinated to form a distorted tetrahedron. It was found that compounds 1-3 can efficiently initiate the ring opening polymerization of l-lactide in the absence of alcohol, yielding polymers with high molecular weights for a wide range of monomer-to-initiator ratios.     

Chiral salen Mn(III) complex-based enantioselective potentiometric sensor for l-mandelic acid

A new enantioselective potentiometric sensor containing chiral salen Mn(III) as the chiral selector was designed for the assay of l-mandelic acid (l-MA). Optimized membrane electrodes displayed linear dynamic range from 1 × 10⁻⁵ to 1 × 10⁻¹ mol L⁻¹ with a detection limit of 7.2 × 10⁻⁶ mol L⁻¹ and a Nernstian response of −58.1 ± 0.5 mV decade⁻¹ towards l-MA within pH range 7.0-10.2. The potentiometric enantioselectivity coefficient () of this sensor was −4.0, indicating that the chiral salen Mn(III) complex-based electrode exhibited fairly good discrimination toward l-MA over counter isomer d-MA. The mechanism of chiral recognition for l-MA is discussed by using HF/STO-3G calculation method simulation.     

Influence of hydrolytic degradation on the surface properties of poly-5d/95l-lactide resorbable bone plates

This study explores in vitro aging effects on the surface properties of resorbable PLA95 (poly-5d/95l-lactide) bone plates. The in vitro degradation of injection molded PLA95 bone plates was undertaken by soaking them in a PBS solution. Specimens were harvested at 0, 4, 6, 8, 12, 20, and 26 weeks. After each in vitro aging period, the surface morphology, viscosity, chemical structure, wettability, and thermal properties of the PLA95 bone plates were examined by scanning electron microscopy (SEM), capillary viscometers, attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), contact angle, and modulated differential scanning calorimetry (MDSC), respectively. The surface morphology of aged PLA95 bone plates exhibited bulk erosion. As hydrolysis progressed, the inherent viscosity (I.V.) of the PLA95 plates gradually decreased from 0.83 ± 0.01 dL/g at week 0-0.46 ± 0.03 dL/g at week 26. However, the absorbance peak intensity ratio between δ_{as CH3} (A_1452 cm⁻¹) and ν_CO (A_1750 cm⁻¹) and the contact angle reveal different tendencies than that of molecular weight, which decreases. The contact angle of the PLA95 plates decreased until week 4, increased until week 8, and subsequently decreased again. Peak separation analysis reveals that the equilibrium part of the modulated DSC overlapped curves exhibit triple endothermic peaks. Over time, in vitro degradation changes the position and area of the individual peaks. After different time periods of degradation, the variation of wettability shows a tendency similar to the change of PLA95 plates crystallinity; the intensity ratio of A_1452 cm⁻¹ and A_1750 cm⁻¹ (δ_{as CH3}/ν _CO) absorbance peaks varied like the ratio of β/α-crystal heat of fusion. Results also show a similarity in the degradation time dependence in MDSC, contact angle, and ATR-FTIR measurements. During the in vitro aging process, the breakdown and subsequent recrystallization of PLA95 molecular chains might be attributed to a progressive change in wettability and the molecular conformation between δ_{as CH3} and ν_CO.     

Effects of molecular weight and small amounts of d-lactide units on hydrolytic degradation of poly(l-lactic acid)s

Films of poly(l-lactic acid) (PLLA) with different number-average molecular weights (M_n) and d-lactide unit contents (X_d) were made amorphous and the effects of molecular weight and small amounts of d-lactide units on the hydrolytic degradation behavior in phosphate-buffered solution at 37 °C of PLLA were investigated. The degraded films were investigated using gravimetry, gel permeation chromatography, polarimetry, differential scanning calorimetry, X-ray diffractometry, and tensile testing. To exclude the effects of crystallinity on the hydrolytic degradation, the films were made amorphous by melt-quenching. The incorporation of small amounts of d-lactide units drastically enhanced the hydrolytic degradation of PLLA. In the period of 0-32 weeks, the hydrolytic degradation rate constant (k) of PLLA films increased with increasing X_d, while the k values did not depend on M_n. This means that the effects of X_d on the hydrolytic degradation rate of the films are higher than those of M_n. In contrast, in the period of 32-60 weeks neither X_d nor M_n was a crucial parameter to determine k values, probably because in addition to these parameters the differences in the amount of catalytic oligomers accumulated in films and crystallinity affect the hydrolytic degradation behavior of the films. The initially amorphous PLLA films remained amorphous even after the hydrolytic degradation for 60 weeks.     

Controlled emission of platinum(II) terpyridyl complexes with poly-l-glutamic acid

Poly-l-glutamic acid, P(Glu), bearing multiple negatively charged side chains served as a polymeric spatially aligned scaffold for the aggregation of positively charged platinum(II) complexes [Pt(trpy)CCR](OTf) (trpy = 2,2′,6′,2″-terpyridine; R = Ph (PtH), PhC₁₂H₂₅-p (PtC₁₂)) through electrostatic interaction, resulting in tunable emission properties. PtC₁₂ was found to exhibit gradual increase in the emission intensity based on the triplet metal-metal-to-ligand charge transfer (³MMLCT) in a tris/HCl buffer (pH 7.6)/MeOH (v/v = 1/14) solution with concomitant decrease in the emission intensity based on the triplet metal-to-ligand charge transfer (³MLCT)/the triplet ligand-to-ligand charge transfer (³LLCT) as the amount of P(Glu) was increased. Such synergistic effect was not observed in the case of PtH, wherein the emission intensity based on ³MLCT/³LLCT was increased by the increase in the amount of P(Glu), indicating that alkyl long chain of PtC₁₂ is considered to play an important role in the aggregation of the platinum(II) terpyridyl moieties to show Pt(II)-Pt(II) and π-π interactions.     

An efficient asymmetric synthesis of Fmoc-l-cyclopentylglycine via diastereoselective alkylation of glycine enolate equivalent

Stereoselective alkylation of the enolate derived from benzyl (2R,3S)-(−)-6-oxo-2,3-diphenyl-4-morpholinecarboxylate (1) with cyclopentyl iodide afforded anti-α-monosubstituted product, benzyl (2R,3S,5S)-(−)-6-oxo-2,3-diphenyl-5-cyclopentyl-4-morpholinecarboxylate (3) in 60% yield. Catalytic hydrogenolysis over PdCl₂ cleaved the auxiliary ring system to give l-cyclopentylglycine (4) in 84% yield. Subsequent protection of the α-amino function with Fmoc-OSu gave Fmoc-l-cyclopentylglycine (5) in high yield.     

Microbial screening in hydroxylation of l-proline

Microbial screening of 250 wild type strains resulted in identification of five strains with the activity of prolyl hydroxylase. All five strains hydroxylated regioselectively and enantioselectively l-proline into 4(R)-trans-hydroxy-l-proline 1. The best conversions were obtained with a wild type of Aeromonas caviae. 3-Hydroxylase activity was not detected.     

Selection of synthetic receptors capable of sensing the difference in binding of d-Ala-d-Ala or d-Ala-d-Lac ligands by screening of a combinatorial CTV-based library

Screening of a combinatorial CTV-based artificial, synthetic receptor library 1 {1-13, 1-13, 1-13} for binding of a variety d-Ala-d-Ala and d-Ala-d-Lac containing ligands (6-11) was carried out in phosphate buffer (0.1 N, pH=7.0). After screening and Edman sequencing, synthetic receptors were found containing amino acid sequences, which are either characteristic for binding dye labeled d-Ala-d-Ala or d-Ala-d-Lac containing ligands. For example, receptors capable of binding d-Ala-d-Ala containing ligands 6, 7, 9 and 11 contained—almost in all cases—at least one basic amino acid residue—predominantly Lys—in their arms. This was really a striking difference with the arms of the receptors capable of binding d-Ala-d-Lac containing ligands 8 and 10, which usually contained a significant number of polar amino acids (Gln and Ser), especially in ligand 8, but hardly any basic amino acids. Use of different (fluorescent) dye labels showed that the label has a profound, albeit not decisive, influence on the binding by the receptor. A hit from the screening of the CTV-library with FITC-peptidoglycan (6) was selected for resynthesis and validation.     

A new and short synthesis of naturally occurring 1-deoxy-l-gulonojirimycin from tri-O-benzyl-d-glucal

A new and short synthesis of naturally occurring 1-deoxy-l-gulonojirimycin from tri-O-benzyl-d-glucal, via a regioselective intramolecular cyclization of an amino triol intermediate, is described. Its absolute configuration was deduced from the single crystal X-ray analysis of compound 11.     

New Sn(IV) and Ti(IV) bis(trimethylsilyl)amides in d,l-lactide polymerization, SEM characterization of polymers

Ring-opening polymerization of d,l-lactide initiated with new chlorotris(bis(trimethylsilyl) amido) tin(IV), tetrakis(bis(trimethylsilyl)amido) tin(IV) and titanium(IV) was investigated. New complexes reveal practically quantitative conversion degrees and produced polymers with higher molecular weight with respect to reference alkoxo-species.The X-ray crystal structure of chlorotris(bis(trimethylsilyl)amido) tin (IV) was investigated. Axial enantiomerism of [SnCl{N(SiMe₃)₂}₃] molecules in solution was studied by high-field dynamic NMR, the value of Gibbs activation energy ΔG^‡ = 59.5 kJ/mol.Field emission SEM investigation of bulk polymer samples and thin films on conductive Al foil revealed a stratified fibrous textures in the bulk polymers, as well as nanoscaled topographical features due to coils and entanglements of individual macromolecules in thin films.     

Kinetics of thermo-oxidative and thermal degradation of poly(d,l-lactide) (PDLLA) at processing temperature

Poly(d,l-lactide) (PDLLA) degraded at processing temperature under air and nitrogen. A random chain scission model was established and used to determine the activation energy E_a, and FT-IR, ¹H and ¹³C NMR were used to elucidate the degradation behavior under different atmospheres. Results showed that there were two to three stages. The 1st stage was dominated by the oligomers containing carboxylic acid groups and hydroxyl groups, during which oxygen and nitrogen had little effect on the degradation, thus they share similar E_a. When the oligomers were consumed over or evaporated, the 2nd stage began, and oxygen had a promoting effect on the thermo-oxidation process, resulting in the great decrease in E_a. The third stage of PDLLA was observed when it degraded under nitrogen over 200 °C, which was caused by the appearance of carboxylic acid substance.