The oxidative stream reforming of methane to syngas in a thin tubular mixed-conducting membrane reactor

The oxidative stream reforming of methane (OSRM) to syngas, involving coupling of exothermic partial oxidation of methane (POM) and endothermic steam reforming of methane (SRM) processes, was studied in a thin tubular Al₂O₃-doped SrCo_0.8Fe_0.2O_3−δ membrane reactor packed with a Ni/γ-Al₂O₃ catalyst. The influences of the temperature and feed concentration on the membrane reaction performances were investigated in detail. The methane and steam conversions increased with increasing the temperature and high conversions were obtained in 850–900 °C. Different from the POM reaction, in the OSRM reaction the temperature and H₂O/CH₄ profoundly influenced the CO selectivity, H₂/CO and heat of the reaction. The CO selectivity increased with increasing the temperature or decreasing the H₂O/CH₄ ratio in the feed owing to the water gas shift reaction (H₂O + CO → CO₂ + H₂). And the H₂ selectivity based on methane conversion was always 100% because the net steam conversion was greater than zero. The H₂/CO in product could be tuned from 1.9 to 2.8 by adjusting the reaction temperature or H₂O/CH₄. Depending on the temperature or H₂O/CH₄, furthermore, the OSRM process could be performed auto-thermally with idealized reaction condition.     

Synthesis of Ni/Al2O3 catalysts via alkaline polyol method and hydrazine reduction method for the partial oxidation of methane

Nickel catalysts supported on γ-Al₂O₃ were synthesized in the presence of polyvinylpyrrolidone (PVP) using both alkaline polyol method and hydrazine reduction method while fixing the weight ratio of [(PVP)]/[Ni(CH₃COO)₂·4H₂O] at 2. The effects of hydrazine [N₂H₅OH]/[Ni] and [NaOH]/[Ni] molar ratios on the structural properties of the catalysts were characterized by transmission electron microscopy (HRTEM) and by X-ray diffraction (XRD). The average of monodispersed Ni nanoparticles ranged between 8.0 and 13.0 nm. The catalytic tests were performed for the partial oxidation of methane in the temperature range of 600–800 °C under a flow rate of 157,500 L kg^–1 hr^–1 with CH₄/O₂= 2. At the molar ratio of [NaOH]/[Ni] = 2, the resultant nickel nanoparticles on alumina was established completely without impurities; thus, it demonstrated the highest catalytic activity, 88% for CH₄ conversion, and H₂ selectivity, 90.60%. The optimum [N₂H₅OH]/[Ni] ratio was determined as 4.1, which means a good catalytic performance and 89.35% selectivity to H₂ for the partial oxidation of methane.     

Biocatalytic System Made of 3D Chitin,Silica Nanopowder and Horseradish Peroxidase for the Removal of 17α-Ethinylestradiol: Determination of Process Efficiency and Degradation Mechanism

The occurrence of 17α-ethinylestradiol (EE2) in the environment and its removal have drawn special attention from the scientific community in recent years, due to its hazardous effects on human and wildlife around the world. Therefore, the aim of this study was to produce an efficient enzymatic system for the removal of EE2 from aqueous solutions. For the first time, commercial silica nanopowder and 3D fibrous chitinous scaffolds from Aplysina fistularis marine sponge were used as supports for horseradish peroxidase (HRP) immobilization. The effect of several process parameters onto the removal mechanism of EE2 by enzymatic conversion and adsorption of EE2 were investigated here, including system type, pH, temperature and concentrations of H₂O₂ and EE2. It was possible to fully remove EE2 from aqueous solutions using system SiO₂(HRP)–chitin(HRP) over a wide investigated pH range (5–9) and temperature ranges (4–45 °C). Moreover, the most suitable process conditions have been determined at pH 7, temperature 25 °C and H₂O₂ and EE2 concentrations equaling 2 mM and 1 mg/L, respectively. As determined, it was possible to reuse the nanoSiO₂(HRP)–chitin(HRP) system to obtain even 55% EE2 degradation efficiency after five consecutive catalytic cycles.     

CO2 hydrogenation to methanol and dimethyl ether at atmospheric pressure using Cu-Ho-Ga/γ–Al2O3 and Cu-Ho-Ga/ZSM-5: Experimental study and thermodynamic analysis

CO₂ valorization through chemical reactions attracts significant attention due to the mitigation of greenhouse gas effects. This article covers the catalytic hydrogenation of CO₂ to methanol and dimethyl ether using Cu-Ho-Ga containing ZSM-5 and g-Al₂O₃ at atmospheric pressure and at temperatures of 210 °C and 260 °C using a CO₂:H₂ feed ratio of 1:3 and 1:9. In addition, the thermodynamic limitations of methanol and DME formation from CO₂ was investigated at a temperature range of 100–400 °C. Cu-Ho-Ga/g-Al₂O₃ catalyst shows the highest formation rate of methanol (90.3 µmol_CH3OH/g_cat/h ) and DME (13.2 µmol_DME/g_cat/h) as well as the highest selectivity towards methanol and DME (39.9 %) at 210 °C using a CO₂:H₂ 1:9 feed ratio. In both the thermodynamic analysis and reaction results, the higher concentration of H₂ in the feed and lower reaction temperature resulted in higher DME selectivity and lower CO production rates.     

The effect of H2O on the sulfation of Havelock limestone under oxy-fuel conditions in a thermogravimetric analyser

A gas mixture representing oxy-fuel combustion conditions was employed in a thermogravimetric analyser to determine the effect of water vapor and SO₂ concentration on limestone sulfation kinetics over the temperature range of 800 to 920 °C. Here, experiments used small samples of particles (4 mg), with small particle sizes (d_p < 38 µm) and large gas flow rates (120 mL/min@NTP) in order to minimize mass transfer interferences. The gas mixture contained 5000 ppm_v SO₂, 2% O₂, and the H₂O content was changed from 0% to 25% with the balance CO₂. When water vapor was added to the gas mixture at lower temperatures (800–870 °C), the limestone SO₂ capture efficiency increased. However, as the temperature became higher, the enhancement in total conversion values decreased. As expected, Havelock limestone at higher temperatures (890 °C, 920 °C, and 950 °C) experienced indirect sulfation and reacted at a faster rate than for lower temperatures (800–870 °C) for direct sulfation over the first five minutes of reaction time. However, the total conversion of Havelock limestone for direct sulfation was generally greater than for indirect sulfation.     

In-Situ Synthesis and Characterization of Nanocomposites in the Si-Ti-N and Si-Ti-C Systems

The pyrolysis (1000 °C) of a liquid poly(vinylmethyl-co-methyl)silazane modified by tetrakis(dimethylamido)titanium in flowing ammonia, nitrogen and argon followed by the annealing (1000–1800 °C) of as-pyrolyzed ceramic powders have been investigated in detail. We first provide a comprehensive mechanistic study of the polymer-to-ceramic conversion based on TG experiments coupled with in-situ mass spectrometry and ex-situ solid-state NMR and FTIR spectroscopies of both the chemically modified polymer and the pyrolysis intermediates. The pyrolysis leads to X-ray amorphous materials with chemical bonding and ceramic yields controlled by the nature of the atmosphere. Then, the structural evolution of the amorphous network of ammonia-, nitrogen- and argon-treated ceramics has been studied above 1000 °C under nitrogen and argon by X-ray diffraction and electron microscopy. HRTEM images coupled with XRD confirm the formation of nanocomposites after annealing at 1400 °C. Their unique nanostructural feature appears to be the result of both the molecular origin of the materials and the nature of the atmosphere used during pyrolysis. Samples are composed of an amorphous Si-based ceramic matrix in which TiN_xC_y nanocrystals (x + y = 1) are homogeneously formed “in situ” in the matrix during the process and evolve toward fully crystallized compounds as TiN/Si₃N₄, TiN_xC_y (x + y = 1)/SiC and TiC/SiC nanocomposites after annealing to 1800 °C as a function of the atmosphere.     

Proton-conductive coordination polymer glass for solid-state anhydrous proton batteries

Designing solid-state electrolytes for proton batteries at moderate temperatures is challenging as most solid-state proton conductors suffer from poor moldability and thermal stability. Crystal–glass transformation of coordination polymers (CPs) and metal–organic frameworks (MOFs) via melt-quenching offers diverse accessibility to unique properties as well as processing abilities. Here, we synthesized a glassy-state CP, [Zn₃(H₂PO₄)₆(H₂O)₃](1,2,3-benzotriazole), that exhibited a low melting temperature (114 °C) and a high anhydrous single-ion proton conductivity (8.0 × 10⁻³ S cm⁻¹ at 120 °C). Converting crystalline CPs to their glassy-state counterparts via melt-quenching not only initiated an isotropic disordered domain that enhanced H⁺ dynamics, but also generated an immersive interface that was beneficial for solid electrolyte applications. Finally, we demonstrated the first example of a rechargeable all-solid-state H⁺ battery utilizing the new glassy-state CP, which exhibited a wide operating-temperature range of 25 to 110 °C.

Melt-quenched coordination polymer glass shows exclusive H⁺ conductivity (8.0 × 10⁻³ S cm⁻¹ at 120 °C, anhydrous) and optimal mechanical properties (42.8 Pa s at 120 °C), enables the operation of an all-solid-state proton battery from RT to 110 °C.     

Microwave-Assisted Defibrillation of Microalgae

The first production of defibrillated celluloses from microalgal biomass using acid-free, TEMPO-free and bleach-free hydrothermal microwave processing is reported. Two routes were explored: i. direct microwave process of native microalgae (“standard”), and ii. scCO₂ pre-treatment followed by microwave processing. ScCO₂ was investigated as it is commonly used to extract lipids and generates considerable quantities of spent algal biomass. Defibrillation was evidenced in both cases to afford cellulosic strands, which progressively decreased in their width and length as the microwave processing temperature increased from 160 °C to 220 °C. Lower temperatures revealed aspect ratios similar to microfibrillated cellulose whilst at the highest temperature (220 °C), a mixture of microfibrillated cellulose and nanocrystals were evidenced. XRD studies showed similar patterns to cellulose I but also some unresolved peaks. The crystallinity index (CrI), determined by XRD, increased with increasing microwave processing temperature. The water holding capacity (WHC) of all materials was approximately 4.5 g H₂O/g sample. The materials were able to form partially stable hydrogels, but only with those processed above 200 °C and at a concentration of 3 wt% in water. This unique work provides a new set of materials with potential applications in the packaging, food, pharmaceutical and cosmetic industries.     

Identifying key mononuclear Fe species for low-temperature methane oxidation

The direct functionalization of methane into platform chemicals is arguably one of the holy grails in chemistry. The actual active sites for methane activation are intensively debated. By correlating a wide variety of characterization results with catalytic performance data we have been able to identify mononuclear Fe species as the active site in the Fe/ZSM-5 zeolites for the mild oxidation of methane with H₂O₂ at 50 °C. The 0.1% Fe/ZSM-5 catalyst with dominant mononuclear Fe species possess an excellent turnover rate (TOR) of 66 mol_MeOH mol_Fe⁻¹ h⁻¹, approximately 4 times higher compared to the state-of-the-art dimer-containing Fe/ZSM-5 catalysts. Based on a series of advanced in situ spectroscopic studies and ¹H- and ¹³C- nuclear magnetic resonance (NMR), we found that methane activation initially proceeds on the Fe site of mononuclear Fe species. With the aid of adjacent Brønsted acid sites (BAS), methane can be first oxidized to CH₃OOH and CH₃OH, and then subsequently converted into HOCH₂OOH and consecutively into HCOOH. These findings will facilitate the search towards new metal-zeolite combinations for the activation of C–H bonds in various hydrocarbons, for light alkanes and beyond.

The monomeric Fe species in Fe/ZSM-5 have been identified as the intrinsic active sites for the low-temperature methane oxidation.     

Pressurized Solvent Extraction of Paulownia Bark Phenolics

Paulownia bark is mostly utilized jointly with wood, but the possibility of a separate valorization through the pressurized extraction of bark bioactives has been assessed. Subcritical water extraction and supercritical CO₂ extraction are green technologies allowing shorter times than conventional solvent extraction under atmospheric shaken conditions. Subcritical water extraction was carried out at temperatures ranging from 140 to 240 °C and supercritical CO₂ extraction was performed at different pressures (10, 20 and 30 MPa), temperatures (35, 45 and 55 °C) and ethanol concentrations (0, 10 and 15% (w/w)). Subcritical water extraction under a non-isothermal operation during heating up to 160 °C (19 min) provided extraction yields up to 30%, and the extracts contained up to 7% total phenolics with an ABTS (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)) radical scavenging capacity equivalent to 35% the activity of Trolox, whereas at 240 °C, the yield decreased to 20%, but the phenolic content reached 21%, and the antiradical activity was equivalent to 85% of Trolox. Supercritical CO₂ extraction at 30 MPa, 45 °C and 30 min reached a global yield of 2% after 180 min of extraction, but the product showed very low antiradical capacity. Gallic acid, vanillic acid, vanillin and apigenin were the major phenolic compounds found in the extracts.     

Self-Assembly by Tridentate or Bidentate Ligand: Synthesis and Vapor Adsorption Properties of Cu(II), Zn(II), Hg(II) and Cd(II) Complexes Derived from a Bis(pyridylhydrazone) Compound

Four complexes, [Cu₄L₂(OCH₃)₂(CH₃OH)₂]·2H₂O (1), [Zn₂L₂Cl₄]·2H₂O·2CH₃OH (2), [Hg₂L₂Br₄]·4CH₃OH (3), and {[CdL₂Cl₂]·4H₂O·4CH₃OH}_n (4), have been synthesized and characterized from a bis(pyridylhydrazone) ligand (L) with copper(II), zinc(II), mercury(II) or cadmium(II), respectively. Complex 1 exists as a centrosymmetric tetranuclear dimer with L as deprotonated tridentate ligand. Complexes 2 and 3 exist as centrosymmetric metallamacrocycles with L as bidentate ligand. Complex 4 exists as a 1D looped-chain coordination polymer. The thermal stabilities and vapor adsorption properties of the four complexes were investigated as well.     

Two Unexpected Temperature-Induced Supermolecular Isomers from Multi-Topic Carboxylic Acid: Hydrogen Bonding Layer or Helix Tube

Under ambient conditions or 160 °C, two supramolecular isomers, namely [(H₄PTTA)(H₂O)₂(DMF)] and [(H₄PTTA)(H₂O)₃]··Guest (1-L and 1-H, H₄PTTA = N-phenyl-N′-phenyl bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxdiimide tetra-carboxylic acid, Guest = DMF and H₂O), were obtained through the reaction of H₄PTTA in a mixture of H₂O and dimethylformamide. The single crystal structures reveal the temperature-dependent supramolecular isomerism derived from the torsion of semi-rigid of H₄PTTA. The 1-L prepared at room temperature is a hydrogen bond based achiral layer, while the hydrothermal synthesized 1-H is isomer resulted in an H-bond-based chiral tubes-packed supramolecular framework.     

Dynamic Effect of Operational Regulation on the Mesophilic BioMethanation of Grape Marc

Wine production annually generates an estimated 11 million metric tonnes of grape marc (GM) worldwide. The diversion of this organic waste away from landfill and towards its use in the generation of renewable energy has been investigated. This study aimed to evaluate the effectiveness of operational parameters relating to the treatment regime and inoculum source in the extraction of methane from GM under unmixed anaerobic conditions at 35 °C. The study entailed the recirculation of a previously acclimated sludge (120 days) as downstream inoculum, an increased loading volume (1.3 kg) and a low substrate-to-inoculum ratio (10:3 SIR). The results showed that an incorporation of accessible operational controls can effectively enhance cumulative methane yield (0.145 m³ CH₄ kg⁻¹ VS), corresponding to higher amounts of digestible organics converted. The calculated average volumetric methane productivity equalled 0.8802 L CH₄ L_Work⁻¹ d⁻¹ over 33.6 days whilst moderate pollutant removal (43.50% COD removal efficiency) was achieved. Molecular analyses identified Firmicutes and Bacteroidetes phyla as core organisms for hydrolytic and fermentative stages in trophic relationships with terminal electron acceptors from the methane-producing Methanosarcina genus. Economic projections established that the cost-effective operational enhancements were sustainable for valorisation from grape marc by existing wineries and distilleries.     

Synthesis and characterization of new heterocyclic Schiff base palladacycles: Ring activation through N-oxide formation

Reaction of the Schiff base ligand derived from 4-pyridinecarboxaldehyde NC₅H₄C(H)N[2′,4′,6′-(CH₃)C₆H₂], (1), with palladium(II) acetate in toluene at 60 °C for 24 h gave [Pd{NC₅H₄C(H)N[2′,4′,6′-(CH₃)C₆H₂]}₂(OCOCH₃)₂], (2), with two ligands coordinated through the pyridine nitrogen. Treatment of the Schiff base ligand derived from 4-pyridinecarboxaldehyde N-oxide, 4-(O)NC₅H₄C(H)N[2′,4′,6′-(CH₃)C₆H₂], (4), with palladium(II) acetate in toluene at 75 °C gave the dinuclear acetato-bridged complex [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(OCOCH₃)]₂, (5) with metallation of an aromatic phenyl carbon. Reaction of complex 5 with sodium chloride or lithium bromide gave the dinuclear halogen-bridged complexes [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(Cl)]₂, (6) and [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(Br)]₂, (7), after the metathesis reaction. Reaction of 6 and 7 with triphenylphosphine gave the mononuclear species [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(Cl)(PPh₃)], (8) and [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}-(Br)(PPh₃)], (9), as air stable solids. Treatment of 6 and 7 with Ph₂P(CH₂)₂PPh₂ (dppe) in a complex/diphosphine 1:2 molar ratio gave the mononuclear complexes [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(PPh₂(CH₂)₂PPh₂)][Cl], (10), and [Pd{4-(O)NC₅H₃C(H)N[2′,4′,6′-(CH₃)C₆H₂]}(PPh₂(CH₂)₂PPh₂)][PF₆], (11), with a chelating diphosphine. The molecular structure of complex 9 was determined by X-ray single crystal diffraction analysis.     

Studies on interaction of isocyanide with transition metal complexes : XI. Photochemical reactions of isocyanide complexes of iron

The photochemical reaction of π-C₅H₅Fe(CO)(CNC₆H₁₁)COCH₃ (I) gave the heterocyclic compound π-C₅H₅Fe(CO)[(C=NC₆H₁₁)₂(CH₃)] (II) involving N-coordination to the iron atom. The analogous complex is obtained by the photo-induced reaction of π-C₅H₅Fe(CO)₂CH₃ with C₆H₁₁NC. A similar reaction of π-C₅H₅Fe(CO)[CNC(CH₃)₃]CH₃ with C₆H₁₁NC gave π-C₅H₅Fe(CO)[(C=NC₆H₁₁) {C=N(CH₃)₃}(CH₃)] (IV) involving different N-substituted imino groups. The possible pathways leading to formation of II are discussed. The mass spectra of these complexes were also investigated.     

Partial Oxidation of Methane to Synthesis Gas over Hexaaluminates LaMAl11O19-δ Catalysts

A series of M-substituted hexaaluminates LaMAl11O19-δ （M=Fe, Co, Ni, Mn, and Cu） were prepared and characterized by XRD, XPS, TPR and TGA techniques, respectively. They exhibited different reducibility and catalytic activity for partial oxidation of methane （POM） to synthesis gas. Among the LaMAl11019-δ samples, LaNiAl11O19-δ showed the best catalytic activity for the topic reaction and selectivity for synthesis gas at 780 ℃ for 2 h. The conversion of CH4 was over 99.2%, and the product selectivity for both CO and H2 was above 90.3%.     

A Pilot-Scale Supercritical Carbon Dioxide Extraction to Valorize Colombian Mango Seed Kernel

Colombian mango production, which exceeded 261,000 t in 2020, generates about 40% of the whole fruit as solid waste, of which more than 50% are seed kernels (over 52,000 t solid by-product); though none is currently used for commercial purposes. This study reports the results of the supercritical carbon dioxide (scCO₂) extraction of an oil rich in essential fatty acids (EFAs) from revalorized mango seed kernels and the optimization of the process by the Response Surface Methodology (RSM). In pilot-scale scCO₂ experiments, pressure (23–37 MPa) and temperature (52–73 °C) were varied, using 4.5 kg of CO₂. The highest experimental oil extraction yield was 83 g/kg (37 MPa and 63 °C); while RSM predicted that 84 g/kg would be extracted at 35 MPa and 65 °C. Moreover, by fine-tuning pressure and temperature it was possible to obtain an EFA-rich lipid fraction in linoleic (37 g/kg) and α-linolenic (4 g/kg) acids, along with a high oleic acid content (155 g/kg), by using a relatively low extraction pressure (23 MPa), which makes the process a promising approach for the extraction of oil from mango waste on an industrial scale, based on a circular economy model.     

Molecular Characteristics and Antioxidant Activity of Spruce (Picea abies) Hemicelluloses Isolated by Catalytic Oxidative Delignification

Spruce (Picea abies) wood hemicelluloses have been obtained by the noncatalytic and catalytic oxidative delignification in the acetic acid-water-hydrogen peroxide medium in a processing time of 3–4 h and temperatures of 90–100 °C. In the catalytic process, the H₂SO₄, MnSO₄, TiO₂, and (NH₄)₆Mo₇O₂₄ catalysts have been used. A polysaccharide yield of up to 11.7 wt% has been found. The hemicellulose composition and structure have been studied by a complex of physicochemical methods, including gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The galactose:mannose:glucose:arabinose:xylose monomeric units in a ratio of 5:3:2:1:1 have been identified in the hemicelluloses by gas chromatography. Using gel permeation chromatography, the weight average molar mass M_w of hemicelluloses has been found to attain 47,654 g/mol in noncatalytic delignification and up to 42,793 g/mol in catalytic delignification. Based on the same technique, a method for determining the α and k parameters of the Mark–Kuhn–Houwink equation for hemicelluloses has been developed; it has been established that these parameters change between 0.33–1.01 and 1.57–472.17, respectively, depending on the catalyst concentration and process temperature and time. Moreover, the FTIR spectra of the hemicellulose samples contain all the bands characteristic of heteropolysaccharides, specifically, 1069 cm⁻¹ (C–O–C and C–O–H), 1738 cm⁻¹ (ester C=O), 1375 cm⁻¹ (–C–CH₃), 1243 cm⁻¹ (–C–O–), etc. It has been determined by the thermogravimetric analysis that the hemicelluloses isolated from spruce wood are resistant to heating to temperatures of up to ~100 °C and, upon further heating, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses has been examined using the compounds simulating the 2,2-diphenyl-2-picrylhydrazyl free radicals.     

Low-Dimensional Architectures in Isomeric cis-PtCl2{Ph2PCH2N(Ar)CH2PPh2} Complexes Using Regioselective-N(Aryl)-Group Manipulation

The solid-state behaviour of two series of isomeric, phenol-substituted, aminomethylphosphines, as the free ligands and bound to Pt^II, have been extensively studied using single crystal X-ray crystallography. In the first library, isomeric diphosphines of the type Ph₂PCH₂N(Ar)CH₂PPh₂ [1a–e; Ar = C₆H₃(Me)(OH)] and, in the second library, amide-functionalised, isomeric ligands Ph₂PCH₂N{CH₂C(O)NH(Ar)}CH₂PPh₂ [2a–e; Ar = C₆H₃(Me)(OH)], were synthesised by reaction of Ph₂PCH₂OH and the appropriate amine in CH₃OH, and isolated as colourless solids or oils in good yield. The non-methyl, substituted diphosphines Ph₂PCH₂N{CH₂C(O)NH(Ar)}CH₂PPh₂ [2f, Ar = 3-C₆H₄(OH); 2g, Ar = 4-C₆H₄(OH)] and Ph₂PCH₂N(Ar)CH₂PPh₂ [3, Ar = 3-C₆H₄(OH)] were also prepared for comparative purposes. Reactions of 1a–e, 2a–g, or 3 with PtCl₂(η⁴-cod) afforded the corresponding square-planar complexes 4a–e, 5a–g, and 6 in good to high isolated yields. All new compounds were characterised using a range of spectroscopic (¹H, ³¹P{¹H}, FT–IR) and analytical techniques. Single crystal X-ray structures have been determined for 1a, 1b∙CH₃OH, 2f∙CH₃OH, 2g, 3, 4b∙(CH₃)₂SO, 4c∙CHCl₃, 4d∙½Et₂O, 4e∙½CHCl₃∙½CH₃OH, 5a∙½Et₂O, 5b, 5c∙¼H₂O, 5d∙Et₂O, and 6∙(CH₃)₂SO. The free phenolic group in 1b∙CH₃OH, 2f∙CH₃OH_, 2g, 4b∙(CH₃)₂SO, 5a∙½Et₂O, 5c∙¼H₂O, and 6∙(CH₃)₂SO exhibits various intra- or intermolecular O–H∙∙∙X (X = O, N, P, Cl) hydrogen contacts leading to different packing arrangements.     

Development and Validation of Stability-Indicating HPLC Methods for the Estimation of Lomefloxacin and Balofloxacin Oxidation Process under ACVA,H2O2, or KMnO4 Treatment. Kinetic Evaluation and Identification of Degradation Products by Mass Spectrometry

The oxidation of lomefloxacin (LOM) and balofloxacin (BAL) under the influence of azo initiator of radical reactions of 4,4′-azobis(4-cyanopentanoic acid) (ACVA) and H₂O₂ was examined. Oxidation using H₂O₂ was performed at room temperature while using ACVA at temperatures: 40, 50, 60 °C. Additionally, the oxidation process of BAL under the influence of KMnO₄ in an acidic medium was investigated. New stability-indicating HPLC methods were developed in order to evaluate the oxidation process. Chromatographic analysis was carried out using the Kinetex 5u XB—C18 100A column, Phenomenex (Torrance, CA, USA) (250 × 4.6 mm, 5 μm particle size, core shell type). The chromatographic separation was achieved while using isocratic elution and a mobile phase with the composition of 0.05 M phosphate buffer (pH = 3.20 adjusted with o-phosphoric acid) and acetonitrile (87:13 v/v for LOM; 80:20 v/v for BAL). The column was maintained at 30 °C. The methods were validated according to the ICH guidelines, and it was found that they met the acceptance criteria. An oxidation process followed kinetics of the second order reaction. The most probable structures of LOM and BAL degradation products formed were assigned by the UHPLC/MS/MS method.