Anisotropic charge carrier transport of optoelectronic functional selenium-containing organic semiconductor materials

Organic semiconductors (OSCs) materials are currently under intense investigation because of their potential applications such as organic field-effect transistors, organic photovoltaic devices, and organic light-emitting diodes. Inspired by the selenization strategy can promote anisotropic charge carrier migration, and selenium-containing compounds have been proved to be promising materials as OSCs both for hole and electron transfer. Herein, we now explore the anisotropic transport properties of the series of selenium-containing compounds. For the compound containing Se Se bond, the Se Se bond will break when attaching an electron, thus those compounds cannot act as n-type OSCs. About the different isomer compounds with conjugated structure, the charge transfer will be affected by the stacking of the conjugated structures. The analysis of chemical structure and charge transfer property indicates that Se-containing materials are promising high-performance OSCs and might be used as p-type, n-type, or ambipolar OSCs. Furthermore, the symmetry of the selenium-containing OSCs will affect the type of OSCs. In addition, there is no direct relationship between the R groups with their performance, whether it or not as p-type OSCs or n-types. This work demonstrates the relationship between the optoelectronic function and structure of selenium-containing OSCs materials and hence paves the way to design and improve optoelectronic function of OSCs materials.     

Imide-Functionalized Polymer Semiconductors

Imide-functionalized π-conjugated polymer semiconductors have received a great deal of interest owing to their unique physicochemical properties and optoelectronic characteristics, including excellent solubility, highly planar backbones, widely tunable band gaps and energy levels of frontier molecular orbitals, and good film morphology. The organic electronics community has witnessed rapid expansion of the materials library and remarkable improvement in device performance recently. This review summarizes the development of imide-functionalized polymer semiconductors as well as their device performance in organic thin-film transistors and polymer solar cells, mainly achieved in the past three years. The materials mainly cover naphthalene diimide, perylene diimide, and bithiophene imide, and other imide-based polymer semiconductors are also discussed. The perspective offers our insights for developing new imide-functionalized building blocks and polymer semiconductors with optimized optoelectronic properties. We hope that this review will generate more research interest in the community to realize further improved device performance by developing new imide-functionalized polymer semiconductors.     

Synthesis of tetracyanoethylene‐substituted ferrocene and its device properties

Small organic molecules are promising candidates for cheaper, flexible and good‐performance sources for organic solar cells (OSCs) due to their easy fabrication, low cost and slightly cheaper processing. However, the lower power conversion efficiency of OSCs is the main problem for their applications. Ferrocene structures could be the best candidates for the active layers of OSCs due to their unique properties such as thermal and chemical stability. The electrochemical, electro‐optical and solar cell performances of 2,5‐dicyano‐3‐ferrocenyl‐4‐ferrocenylethynylhexa‐2,4‐dienedinitrile (DiCN‐Fc) structures were investigated. First, the electrochemical and electro‐optical properties were examined for finding the highest occupied and lowest unoccupied molecular orbital values and bandgap of DiCN‐Fc. The best photovoltaic performance was obtained with 7 wt% of DiCN‐Fc loading, with a power conversion efficiency of about 4.27%. In the light of our investigations, ferrocenyl‐substituted small organic molecules could contribute to the development of organic photovoltaic devices.     

Porous shape-persistent rylene imine cages with tunable optoelectronic properties and delayed fluorescence

A simultaneous combination of porosity and tunable optoelectronic properties, common in covalent organic frameworks, is rare in shape-persistent organic cages. Yet, organic cages offer important molecular advantages such as solubility and modularity. Herein, we report the synthesis of a series of chiral imine organic cages with three built-in rylene units by means of dynamic imine chemistry and we investigate their textural and optoelectronic properties. Thereby we demonstrate that the synthesized rylene cages can be reversibly reduced at accessible potentials, absorb from UV up to green light, are porous, and preferentially adsorb CO₂ over N₂ and CH₄ with a good selectivity. In addition, we discovered that the cage incorporating three perylene-3,4:9,10-bis(dicarboximide) units displays an efficient delayed fluorescence. Time-correlated single photon counting and transient absorption spectroscopy measurements suggest that the delayed fluorescence is likely a consequence of a reversible intracage charge-separation event. Rylene cages thus offer a promising platform that allows combining the porosity of processable materials and photochemical phenomena useful in diverse applications such as photocatalysis or energy storage.

Chiral rylene imine cages combine porosity and tunable optoelectronic properties. They adsorb CO₂ over N₂ with good selectivity and can show an efficient delayed fluorescence.     

Recent structural evolution of lactam- and imide-functionalized polymers applied in organic field-effect transistors and organic solar cells

Organic semiconductor materials, especially donor–acceptor (D–A) polymers, have been increasingly applied in organic optoelectronic devices, such as organic field-effect transistors (OFETs) and organic solar cells (OSCs). Plenty of high-performance OFETs and OSCs have been achieved based on varieties of structurally modified D–A polymers. As the basic building block of D–A polymers, acceptor moieties have drawn much attention. Among the numerous types, lactam- and imide-functionalized electron-deficient building blocks have been widely investigated. In this review, the structural evolution of lactam- or imide-containing acceptors (for instance, diketopyrrolopyrrole, isoindigo, naphthalene diimide, and perylene diimide) is covered and their representative polymers applied in OFETs and OSCs are also discussed, with a focus on the effect of varied structurally modified acceptor moieties on the physicochemical and photoelectrical properties of polymers. Additionally, this review discusses the current issues that need to be settled down and the further development of new types of acceptors. It is hoped that this review could help design new electron-deficient building blocks, find a more valid method to modify already reported acceptor units, and achieve high-performance semiconductor materials eventually.

This review highlights the recent structural evolution of lactam- and imide-functionalized polymers applied in organic field-effect transistors and organic solar cells.     

Unfused Nonfullerene Acceptors Based on Simple Dipolar Merocyanines

Merocyanine (MC) dyes exhibit facile synthesis and attractive optical properties, making them widely studied as the donor materials in organic solar cells (OSCs). In this study, for the first time, simple indole-based MCs are successfully designed as unfused nonfullerene acceptors (NFAs) for OSCs by forming dimers with A−D-π-D−A structure, which possess enhanced photostability compared to the well-known ITIC acceptor and high electron mobility in blend films. When blended with P3HT donor, one of the dimers, i. e. Z2, shows a good cell efficiency of 3.53 %, which outperforms the performance of most of P3HT/NFA blends, particularly for unfused systems, and thus indicates good potential of simple MCs as NFAs.     

Diketopyrrolopyrrole-based functional supramolecular polymers: next-generation materials for optoelectronic applications

The very concept of dye and pigment chemistry that was long known to the industrial world underwent a radical revision after the discovery and commercialization of dyes such as mauveine, indigo, and so on. Apart from their conventional role as coloring agents, organic dyes, and pigments have been identified as indispensable sources for high-end technological applications including optical and electronic devices. Simultaneous with the advancement in the supramolecular chemistry of π-conjugated systems and the divergent evolution of organic semiconductor materials, several dyes, and pigments have emerged as potential candidates for contemporary optoelectronic devices. Of all the major pigments, diketopyrrolopyrrole (DPP) better known as the ‘Ferrari Pigment’ and its derivatives have emerged as a major class of organic functional dyes that find varied applications in fields such as industrial pigments, organic solar cells, organic field–effect transistors, and in bioimaging. Since its discovery in 1974 by Farnum and Mehta, DPP-derived dyes gained rapid attention because of its attractive color, synthetic feasibility, ease of functionalization, and tunable optical and electronic properties. The advancement in supramolecular polymerization of DPP-based small molecules and oligomers with directed morphological and electronic features have led to the development of high performing optoelectronic devices. In this review, we highlight the recent developments in the optoelectronic applications of DPP derivatives specifically engineered to form supramolecular polymers.     

Designing spirobifullerene core based three-dimensional cross shape acceptor materials with promising photovoltaic properties for high-efficiency organic solar cells

The development of organic electron acceptor materials is one of the key factors for realizing high-performance organic solar cells (OSCs). Nonfullerene electron acceptors, compared to traditional fullerene acceptor materials, have gained much impetus owing to their better optoelectronic tunabilities and lower cost, as well as higher stability. Therefore, 5 three-dimensional (3D) cross-shaped acceptor materials having a spirobifullerene core flanked with 2,1,3-benzothiadiazole are designed from a recently synthesized highly efficient acceptor molecule SF(BR) ₄ and are investigated in detail with regard to their use as acceptor molecules in OSCs. The density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed for the estimation of frontier molecular orbital (FMO) analysis, density of states analysis, reorganization energies of electron and hole, dipole moment, open-circuit voltage, photo-physical characteristics, and transition density matrix analysis. In addition, the structure-property relationship is studied, and the influence of end-capped acceptor modifications on photovoltaic, photo-physical, and electronic properties of newly selected molecules ( H1-H5 ) is calculated and compared with reference ( R ) acceptor molecule SF(BR) ₄ . The structural tailoring at terminals was found to effectively tune the FMO band gap, energy levels, absorption spectra, open-circuit voltage, reorganization energy, and binding energy value in selected molecules H1 to H5 . The 3D cross-shaped molecules H1 to H5 suppress the intermolecular aggregation in PTB7-Th blend, which leads to high efficiency of acceptor material H1 to H5 in OSCs. Consequently, better optoelectronic properties are achieved from designed molecules H1 to H5 . It is proposed that the conceptualized molecules are superior than highly efficient spirobifullerene core-based SF(BR) ₄ acceptor molecules and, thus, are recommended to experiments for future developments of highly efficient solar cells.     

The rylene colorant family--tailored nanoemitters for photonics research and applications

This Review summarizes the latest advances in the field of rylene dyes and rylene nanoemitters for applications in photonics, and describes the influence of the dye design on the optical properties, the self-assembly, the molecular interactions, as well as the labeling specificity of the compounds. The interplay between tailored (macro)molecular design and bulk/single-molecule spectroscopy enables complex processes to be explained, for example, the kinetics of energy-transfer processes or (bio)catalysis. Such investigations are essential for the ultimate design of optimized nanoemitters, and require a close cooperation between spectroscopists and preparative organic chemists.     

Unsymmetrically Chlorinated Non-Fused Electron Acceptor Leads to High-Efficiency and Stable Organic Solar Cells

Searching the cost-effective organic semiconductors is strongly needed in order to facilitate the practice of organic solar cells (OSCs), yet to be fulfilled. Herein, we have succeeded in developing two non-fused ring electron acceptors (NFREAs), leading to the highest efficiency of 16.2 % for the NFREA derived OSCs. These OSCs exhibit the superior operational stabilities under one sun equivalent illumination without ultraviolet (UV) filtration. It is revealed that the modulation of halogen substituents on aromatic side chains, as the new structural tool to tune the intermolecular interaction and optoelectronic properties of acceptors, not only promotes the interlocked tic-tac-toe frame of three-dimensional stacks in solid, but also improves charge dynamics of acceptors to enable high-performance and stable OSCs.     

Fluorinated Photovoltaic Materials for High‐Performance Organic Solar Cells

Over the past decade, organic solar cells (OSCs) have achieved a dramatic boost in their power conversion efficiencies from about 6 % to over 16 %. In addition to developments in device engineering, innovative photovoltaic materials, especially fluorinated donors and acceptors, have become the dominant factor for improved device performance. This minireview highlights fluorinated photovoltaic materials that enable efficient OSCs. Impressive OSCs have been obtained by developing some important molds of fluorinated donor and acceptor systems. The molecular design strategy and the matching principle of fluorinated donors and acceptors in OSCs are discussed. Finally, a concise summary and outlook are presented for advances in fluorinated materials to realize the practical application of OSCs.     

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor

In the last few decades, organic solar cells (OSCs) have drawn broad interest owing to their advantages such as being low cost, flexible, semitransparent, non-toxic, and ideal for roll-to-roll large-scale processing. Significant advances have been made in the field of OSCs containing high-performance active layer materials, electrodes, and interlayers, as well as novel device structures. Particularly, the innovation of active layer materials, including novel acceptors and donors, has contributed significantly to the power conversion efficiency (PCE) improvement in OSCs. In this review, high-performance acceptors, containing fullerene derivatives, small molecular, and polymeric non-fullerene acceptors (NFAs), are discussed in detail. Meanwhile, highly efficient donor materials designed for fullerene- and NFA-based OSCs are also presented. Additionally, motivated by the incessant developments of donor and acceptor materials, recent advances in the field of ternary and tandem OSCs are reviewed as well.     

Relationship Between Molecular Structure,Single crystal Packing and Self-Assembly Behavior: A Case Based on Pyrene Imide Derivatives

Development of new n-type one-dimensional (1D) self-assembly nanostructure and a clear understanding of the relationship between molecular structure and self-assembly behavior are important prerequisites for further designing and optimizing organic optoelectronic nanodevice. In this article, a series of n-type organic semiconductor materials based on pyrene imide were successfully synthesized through [4+2] cycloaddition reactions and their preliminary optical and electrochemical properties were studied. The simulated HOMO-LUMO bandgaps via DFT tallied with the experimental data well. The self-assembly of these materials showed needle or fiber-like morphologies, indicating that different conjugation degree or alkyl group had significant influence on their self-assembly behaviors. Furthermore, the single-crystal packing for these molecules were analyzed and it was found out that the changes of conjugated backbone and functional group would affect certain crystal lattice parameter significantly, such as the intermolecular packing distance and crystal size etc, which would further result in different self-assembly morphology.     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.     

Near-infrared small molecular fluorescent dyes for photothermal therapy

This review aims to provide a summary of the progress in fluorescent dyes for photothermal therapy in recent years and it is classified according to the structure of organic molecules including cyanines, phthalocyanines, rhodamine analogues and BODIPYs.     

Dimesitylboryl‐Decorated Azaarene: Synthesis,Enhanced Stability and Optoelectronic Property

The instability of large acenes and analogues usually limits their wide potentials in organic devices. Thus, effectively constructing large acenes or heteroacenes and examining their optoelectronic properties are of great interest. We herein describe the synthesis, optoelectronic behaviors and electroluminescent property of dimesitylboryl‐decorated azaarene 5 and its homologue 7 . The former emits strong green fluorescence in non‐polar solvents but yellow light in polar solvents. The latter emits a blue light in various organic solvents. Moreover, their electrochemical behavior, photostability and electroluminescent property were further studied in a comparative manner, and the experimental findings suggest that the desired heteroarenes are appealing materials for fabricating electroluminescent devices.     

Design and Synthesis of Conjugated Starburst Molecules for Optoelectronic Applications

In recent years, conjugated starburst molecules, which possess a core unit with radial arms linked to the central axle, have become the research topic owing to their well‐defined chemical structures, good solution processability, excellent reproducibility, and superior optoelectronic properties. The increasing interest in starburst systems is evidenced by progressively more frequent investigation on the use of these materials in optoelectronics. The ability to modify chemical structures through control over the core and arms on a molecular level can directly affect the electronic and electroluminescent characteristics of the resulting materials. In this review, we summarize and discuss main progress in our group concerning the rapidly developing field, in which strategies for the design and construction of starbursts are presented at length. Moreover, their application in organic light‐emitting diodes (OLEDs) and organic semiconductor lasers (OSLs) are demonstrated as well, exploring the influence of molecular structures on the optoelectronic properties. Challenges and outlooks are also given at last.     

Recent Advances in Isoindigo‐Inspired Organic Semiconductors

Over the past decade, isoindigo has become a widely used electron‐deficient subunit in donor‐acceptor organic semiconductors, and these isoindigo‐based materials have been widely used in both organic photovoltaic (OPV) devices and organic field effect transistors (OFETs). Shortly after the development of isoindigo‐based semiconductors, researchers began to modify the isoindigo structure in order to change the optoelectronic properties of the resulting materials. This led to the development of many new isoindigo‐inspired compounds; since 2012, the Kelly Research Group has synthesized a number of these isoindigo analogues and produced a variety of new donor‐acceptor semiconductors. In this Personal Account, recent progress in the field is reviewed. We describe how the field has evolved from relatively simple donor‐acceptor small molecules to structurally complex, highly planarized polymer systems. The relevance of these materials in OPV and OFET applications is highlighted, with particular emphasis on structure‐property relationships.     

π‐Extended Indenofluorenes

A series of π‐extended aromatic indenofluorene (IF) analogues with naphthalene and anthracene cores have been synthesized through acid‐catalyzed intramolecular cyclization. The regioselectivity of the reaction is controlled by a combination of steric and electronic factors and in some cases several possible regioisomers have resulted from the same precursor. The effects of ring connectivity on the optoelectronic properties were investigated by DFT calculations, absorption/emission spectroscopy, cyclic voltammetry, and spectroelectrochemical studies. All regioisomers exhibited a redshift of their absorption/emission bands relative to the parent IF analogues, but the magnitude of this shift and other optoelectronic properties (luminescence quantum yield, etc.) depends on the ring connectivity in a less obvious manner.     

Theoretical study of the optical and charge transport properties of star-shaped molecules with 1,3,5-triazine-core derivatives as organic light-emitting and organic solar cells materials

A series of D–π–A star-shaped molecules has been investigated theoretically by using density functional theory (DFT) to reveal their optical, electronic, and charge transport properties for applications in organic light-emitting diodes (OLEDs) and organic solar cells (OSCs). The calculated results show that their optical, electronic, and charge transport properties are affected by the different end groups and π-bridges. Our results reveal that the molecules under investigation can serve as OSCs donor materials and/or luminescent materials for OLEDs. In addition, all molecules are expected to be promising candidates for hole- and electron-transport materials. On the basis of the obtained results, we propose a rational way for the design of multifunctional materials for OLEDs and OSCs applications.