One-pot hydrothermal synthesis of willow branch-shaped MoS2/CdS heterojunctions for photocatalytic H2 production under visible light irradiation

Willow branch-shaped MoS₂/CdS heterojunctions are successfully synthesized for the first time by a facile one-pot hydrothermal method. The as-prepared samples were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption measurements, diffuse reflectance spectroscopy, and photoelectrochemical and photoluminescence spectroscopy tests. The photocatalytic hydrogen evolution activities of the samples were evaluated under visible light irradiation. The resulting MoS₂/CdS heterojunctions exhibit a much improved photocatalytic hydrogen evolution activity than that obtained with CdS and MoS₂. In particular, the optimized MC-5 (5 at.% MoS₂/CdS) photocatalyst achieved the highest hydrogen production rate of 250.8 μmol h^-1, which is 28 times higher than that of pristine CdS. The apparent quantum efficiency (AQE) at 420 nm was 3.66%. Further detailed characterizations revealed that the enhanced photocatalytic activity of the MoS₂/CdS heterojunctions could be attributed to the efficient transfer and separation of photogenerated charge carriers resulting from the core-shell structure and the close contact between MoS₂ nanosheets and CdS single-crystal nanorods, as well as to increased visible light absorption. A tentative mechanism for photocatalytic H₂ evolution by MoS₂/CdS heterojunctions was proposed. This work will open up new opportunities for developing more efficient photocatalysts for water splitting.     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

Ag3PO4/MoS2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag₃PO₄/MoS₂纳米片复合催化剂。运用X射线衍射仪（XRD）、透射电子显微镜（TEM）、扫描电子显微镜（SEM）、紫外可见漫反射光谱（UV-Vis）和荧光发射光谱（PL）对复合催化剂的结构和形貌进行了表征。结果表明,Ag₃PO₄纳米粒子均匀地附着在MoS₂纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS₂纳米片与Ag₃PO₄形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag₃PO₄的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag₃PO₄对于亚甲基蓝的降解率仅为35%。Ag₃PO₄/MoS₂纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

Ag_3PO_4/MoS_2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag_3PO_4/MoS_2纳米片复合催化剂。运用X射线衍射仪(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis)和荧光发射光谱(PL)对复合催化剂的结构和形貌进行了表征。结果表明,Ag_3PO_4纳米粒子均匀地附着在MoS_2纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS_2纳米片与Ag_3PO_4形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag_3PO_4的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag_3PO_4对于亚甲基蓝的降解率仅为35%。Ag_3PO_4/MoS_2纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

Introducing sulfur vacancies and in-plane SnS2/SnO2 heterojunction in SnS2 nanosheets to promote photocatalytic activity

Due to the relatively sluggish charge carrier separation in metal sulfides, the photocatalytic activity of them is still far lower than expected. Herein, sulfur vacancies and in-plane SnS₂/SnO₂ heterojunction were successfully introduced into the SnS₂ nanosheets through high energy ball-milling. These defective structures were studied by the electron paramagnetic resonance, Raman spectra, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscope analyses. The sulfur vacancies and in-plane heterojunctions strongly accelerate the separation of photoexcited electron-hole pairs, as confirmed by the photoluminescence emission spectra and time-resolved photoluminescence decay spectra. The introduction of sulfur vacancies and in-plane heterojunction in SnS₂ nanosheets results in roughly six times higher photodegrading rate for methyl orange and four times higher photocatalytic reduction rate of Cr⁶⁺ than those of pure SnS₂ nanosheets.     

Construction of 2D-2D TiO2 nanosheet/layered WS2 heterojunctions with enhanced visible-light-responsive photocatalytic activity

Constructing nanocomposites that combine the advantages of composite materials, nanomaterials, and interfaces has been regarded as an important strategy to improve the photocatalytic activity of TiO₂. In this study, 2D-2D TiO₂ nanosheet/layered WS₂ (TNS/WS₂) heterojunctions were prepared via a hydrothermal method. The structure and morphology of the photocatalysts were systematically characterized. Layered WS₂ (～4 layers) was wrapped on the surface of TiO₂ nanosheets with a plate-to-plate stacked structure and connected with each other by W=O bonds. The as-prepared TNS/WS₂ heterojunctions showed higher photocatalytic activity for the degradation of RhB under visible-light irradiation, than pristine TiO₂ nanosheets and layered WS₂. The improvement of photocatalytic activity was primarily attributed to enhanced charge separation efficiency, which originated from the perfect 2D-2D nanointerfaces and intimate interfacial contacts between TiO₂ nanosheets and layered WS₂. Based on experimental results, a double-transfer photocatalytic mechanism for the TNS/WS₂ heterojunctions was proposed and discussed. This work provides new insights for synthesizing highly efficient and environmentally stable photocatalysts by engineering the surface heterojunctions.     

High Phase‐Purity 1T‐MoS2 Ultrathin Nanosheets by a Spatially Confined Template

The crystal phase plays an important role in controlling the properties of a nanomaterial; however, it is a great challenge to obtain a nanomaterial with high purity of the metastable phase. For instance, the large‐scale synthesis of the metallic phase MoS₂ (1T‐MoS₂) is important for enhancing electrocatalytic reaction, but it can only be obtained under harsh conditions. Herein, a spatially confined template method is proposed to synthesize high phase‐purity MoS₂ with a 1T content of 83 %. Moreover, both the confined space and the structure of template will affect the purity of 1T‐MoS₂; in this case, this approach was extended to other similar spatially confined templates to obtain the high‐purity material. The obtained ultrathin nanosheets exhibit good electrocatalytic activity and excellent stability in the hydrogen evolution reaction.     

Ultrathin ZnIn2S4 Nanosheets Anchored on Ti3C2TX MXene for Photocatalytic H2 Evolution

Photocatalysts derived from semiconductor heterojunctions that harvest solar energy and catalyze reactions still suffer from low solar‐to‐hydrogen conversion efficiency. Now, MXene (Ti₃C₂T_X) nanosheets (MNs) are used to support the in situ growth of ultrathin ZnIn₂S₄ nanosheets (UZNs), producing sandwich‐like hierarchical heterostructures (UZNs‐MNs‐UZNs) for efficient photocatalytic H₂ evolution. Opportune lateral epitaxy of UZNs on the surface of MNs improves specific surface area, pore diameter, and hydrophilicity of the resulting materials, all of which could be beneficial to the photocatalytic activity. Owing to the Schottky junction and ultrathin 2D structures of UZNs and MNs, the heterostructures could effectively suppress photoexcited electron–hole recombination and boost photoexcited charge transfer and separation. The heterostructure photocatalyst exhibits improved photocatalytic H₂ evolution performance (6.6 times higher than pristine ZnIn₂S₄) and excellent stability.     

Free‐standing and Flexible MoS2/rGO Paper Electrode for Amperometric Detection of Folic Acid

The development of flexible electrodes is of considerable current interest because of the increasing demand for modern electronics, portable medical products, and compact devices. We report a new type of flexible electrochemical sensor fabricated by integrating graphene and MoS₂ nanosheets. A highly flexible and free‐standing conductive MoS₂ nanosheets/reduced graphene oxide (MoS₂/rGO) paper was prepared by a two‐step process: vacuum filtration and chemical reduction treatment. The MoS₂/graphene oxide (MoS₂/GO) paper obtained by a simple filtration method was transformed into MoS₂/rGO paper after a chemical reduction process. The obtained MoS₂/rGO paper was characterized by scanning electron microscopy, X‐ray diffraction spectroscopy, X‐ray photoelectron spectroscopy, Raman spectroscopy, electrochemical impedance spectroscopy. The electrochemical behavior of folic acid (FA) on MoS₂/rGO paper electrode was investigated by cyclic voltammetry and amperometry. Electrochemical experiments indicated that flexible MoS₂/rGO composite paper electrode exhibited excellent electrocatalytic activity toward the FA, which can be attributed to excellent electrical conductivity and high specific surface area of the MoS₂/rGO paper. The resulting biosensor showed highly sensitive amperometric response to FA with a wide linear range.     

Surface Modulation of Iron-doped MoS2 Nanosheets by Phytic Acid for Enhanced Water Oxidation

Surface modulation and heteroatom doping are important approaches for boosting the electrocatalytic performances of MoS₂ nanosheets. As a molecular electrocatalyst, the natural organic phytic acid (PA) offer attractive intermediate for oxygen evolution reaction (OER). Here, a surface modulation strategy is demonstrated through the decoration of PA onto the basal plane of iron (Fe)-doped MoS₂ nanosheets supported on nickel foam (NF) for boosted OER activity. Experimental results indicate that the PA modification and Fe doping could effectively boost the charge transfer and mass transport during the OER process. Specially, PA2-Fe−MoS₂ grown on NF (PA2-Fe−MoS₂/NF) exhibits excellent OER activity (218 mV@20 mA cm⁻²) and durability, even superior to RuO₂ and many other previously reported OER catalysts. This natural organic molecule modification provides a facile strategy to designing low-cost and efficient electrocatalytic materials.     

Nanostructured MoS2 Nanorose/Graphene Nanoplatelet Hybrids for Electrocatalysis

Tailoring and enhancing electrocatalytic activity is of the utmost importance from the viewpoints of sustainable energy and sensing. MoS₂ and graphene show great promise for the electrocatalysis of many reactions. Given that both graphene and MoS₂ are highly anisotropic in nature, with edge planes that are several orders of magnitude more catalytically active than basal planes, a new hybrid material with maximized edge‐plane density to provide efficient electron transfer, high catalytic activity, and conductive cores was engineered. The hybrid material consists of radial MoS₂ nanosheets with a high density of edge planes and unsaturated active sulfur atoms as well as interspersed with conductive graphene nanoplatelets. This hybrid material exhibits excellent activity for the hydrogen evolution reaction and the detection of DNA nucleobases. Such a nanoengineered, nanostructured hybrid material may play a major role in future electrocatalytic devices.     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

Highly Sensitive and Selective Determination of Dopamine in the Presence of Ascorbic Acid Using Gold Nanoparticles‐Decorated MoS2 Nanosheets Modified Electrode

Herein, a novel nanocomposite has been synthesized by molybdenum disulfide (MoS₂) nanosheets and gold nanoparticles (AuNPs) via a microwave‐assisted hydrothermal method, which possesses the specific features of both MoS₂ and AuNPs. The AuNPs@MoS₂ nanocomposite modified electrode exhibits excellent electrocatalytic activity toward dopamine (DA). Its oxidation peak current shows a linear dependence over the DA concentration in the range from 0.1 to 200 µM, with a detection limit of 80 nM (S/N=3). More importantly, the AuNPs@MoS₂‐based sensor can detect DA in the presence of a large excess of ascorbic acid. The AuNPs@MoS₂‐based sensor shows good sensitivity, reproducibility and selectivity, suggesting that the AuNPs@MoS₂ nanocomposite is a promising candidate in electrochemical sensing and other electrocatalytic applications.     

Bifunctional Electrocatalyst with 0D/2D Heterostructure for Highly Efficient Hydrogen and Oxygen Generation

A novel MoS₂ quantum dots/CoSe₂ nanosheet (MoS₂ QDs/CoSe₂) hybrid with 0D/2D heterostructure has been developed. The CoSe₂ nanosheets (NSs) enable an excellent oxygen evolution reaction (OER) activity with increasing vacancy configuration on one hand, while the MoS₂ QDs serve as an eminent hydrogen evolution reaction (HER) catalyst on the other. By integrating MoS₂ QDs and CoSe₂ NSs, the hybrid exhibits excellent electrocatalytic performances in HER and OER. The unique 0D/2D hetero‐interface increases the exposed active sites and facilitates electron transfer, thereby boosting the electrocatalytic activity. Relatively low overpotentials of 82 mV and 280 mV are required to drive the current density of 10 mA/cm² for HER and OER, with corresponding Tafel slopes of 69 and 75 mV/dec, respectively. As such, this work provides an efficient yet simple approach to construct bifunctional electrocatalysts with enhanced activity and stability.     

Self‐Optimization of the Active Site of Molybdenum Disulfide by an Irreversible Phase Transition during Photocatalytic Hydrogen Evolution

The metallic 1T‐MoS₂ has attracted considerable attention as an effective catalyst for hydrogen evolution reactions (HERs). However, the fundamental mechanism about the catalytic activity of 1T‐MoS₂ and the associated phase evolution remain elusive and controversial. Herein, we prepared the most stable 1T‐MoS₂ by hydrothermal exfoliation of MoS₂ nanosheets vertically rooted into rigid one‐dimensional TiO₂ nanofibers. The 1T‐MoS₂ can keep highly stable over one year, presenting an ideal model system for investigating the HER catalytic activities as a function of the phase evolution. Both experimental studies and theoretical calculations suggest that 1T phase can be irreversibly transformed into a more active 1T′ phase as true active sites in photocatalytic HERs, resulting in a “catalytic site self‐optimization”. Hydrogen atom adsorption is the major driving force for this phase transition.     

Large‐scale Two‐dimensional MoSx Catalyst Prepared under Mild Conditions for Enhancing Electrocatalytic Hydrogen Evolution Reaction

As an electrocatalyst with abundant resources and great potential, molybdenum disulfide is regarded as one of the most likely alternatives to expensive noble‐metals catalysts. However, it is still a challenge to achieve large scale production of few‐layer MoS₂ with enhancing activity of electrocatalytic hydrogen reaction at ambient conditions. Herein, we developed a simple environmentally friendly two‐step method, which included intercalation reaction and a subsequent electrochemical reduction reaction for mass preparation of defect‐rich desulfurized MoS_x (D?MoS_x) nanosheets with plentiful sulfur vacancies. The ratio of sulfur‐molybdenum atoms can be adjusted from 2 : 1 to 1.4 : 1 by regulating the desulfurization voltage. It was found that the HER catalytic activity of the D?MoS_x was enhanced compared with that of pristine MoS₂ (P?MoS₂), the current density of D?MoS_x (desulfurization at ?1.0 V) at ?0.3 V versus RHE was about 169% of the P?MoS₂, and the Tafel slope decreased to 136 mV dec^?1. This method can be widely applied to large‐scale preparation of other two‐dimensional materials.     

Enhanced Photocatalytic Hydrogen Evolution over Hierarchical Composites of ZnIn2S4 Nanosheets Grown on MoS2 Slices

A highly active hierarchical MoS₂/ZnIn₂S₄ composite catalyst was synthesized in situ by using a facile controlled‐growth approach through a solvothermal process. During the solvothermal reaction, 2D ultrathin curled ZnIn₂S₄ nanosheets grew on the surface of MoS₂ slices, which could help to form a more‐homogeneous mixture, effective interfacial contact, and strong interactions between the ZnIn₂S₄ nanosheets and the MoS₂ slices. The intimate contact between ZnIn₂S₄ and MoS₂ favored the formation of junctions between the two components, thereby improving the charge separation and prolonging the mean lifetime of the electron–hole pairs. Moreover, growing ZnIn₂S₄ nanosheets by visible‐light catalysis on MoS₂ slices afforded a higher number of available catalytically active sites. So, the photocatalytic hydrogen‐evolution performance of the hierarchical MoS₂/ZnIn₂S₄ composite was significantly enhanced, owing to a synergistic effect of these factors. This work could provide new insights into the fabrication of a highly efficient and low‐cost non‐noble‐metal co‐catalyst for visible‐light H₂ generation.     

Enhanced Photoexcited Carrier Separation in Oxygen‐Doped ZnIn2S4 Nanosheets for Hydrogen Evolution

Limited by the relatively sluggish charge‐carrier separation in semiconductors, the photocatalytic performance is still far below what is expected. Herein, a model of ZnIn₂S₄ (ZIS) nanosheets with oxygen doping is put forward to obtain in‐depth understanding of the role that doping atoms play in photocatalysis. It shows enhanced photocatalytic activity compared with pristine ZIS. The electron dynamics analyzed by ultrafast transient absorption spectroscopy reveals that the average recovery lifetime of photoexcited electrons is increased by 1.53 times upon oxygen incorporation into the ZIS crystals, indicating enhanced separation of photoexcited carriers in oxygen‐doped ZIS nanosheets. As expected, the oxygen‐doped ZIS nanosheets show a remarkably improved photocatalytic activity with a hydrogen evolution rate of up to 2120 μmol h^?1 g^?1 under visible‐light irradiation, which is 4.5 times higher than that of the pristine ZIS nanosheets.     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。