Iron chelation equilibria, redox, and siderophore activity of a saccharide platform ferrichrome analogue

A complete characterization of the aqueous solution Fe(III) and Fe(II) coordination chemistry of a saccharide-based ferrichrome analogue, 1-O-methyl-2,3,6-tris-O-[4-(N-hydroxy-N-ethylcarbamoyl)-n-butyryl]-alpha-D-glucopyranoside (H3LN236), is reported including relevant thermodynamic parameters and growth promotion activity with respect to both Gram-negative and Gram-positive bacterial strains. The saccharide platform is an attractive backbone for the design and synthesis of ferrichrome analogues because of its improved water solubility and hydrogen-bonding capabilities, which can potentially provide favorable receptor recognition and biological activity. The ligand deprotonation constants (pKa values), iron complex (FeIII(LN236) and FeII(LN236)1-) protonation constants (KFeHxL-236-N), overall Fe(III) and Fe(II) chelation constants (beta110), and aqueous solution speciation were determined by spectrophotometric and potentiometric titrations, EDTA competition equilibria, and cyclic voltammetry. Log betaIII110 = 31.16 and pFe = 26.1 for FeIII(LN236) suggests a high affinity for Fe(III), which is comparable to or greater than ferrichrome and other ferrichrome analogues. The E1/2 for the FeIII(LN236)/FeII(LN236)1- couple was determined to be -454 mV (vs NHE) from quasi-reversible cyclic voltammograms at pH 9. Below pH 6.5, the E1/2 shifts to more positive values and the pH-dependent E1/2 profile was used to determine the FeII(LN236)1- protonation constants and overall stability constant log betaII110 = 11.1. A comparative analysis of similar data for an Fe(III) complex of a structural isomer of this exocyclic saccharide chelator (H3LR234), including strain energy calculations, allows us to analyze the relative effects of the pendant arm position and hydroxamate moiety orientation (normal vs retro) on overall complex stability. A correlation between siderophore activity and iron coordination chemistry of these saccharide-hydroxamate chelators is made.     

Imidazole and imidazolate iron complexes: on the way for tuning 3D-structural characteristics and reactivity. Redox interconversions controlled by protonation state

X-ray structures for six Fe(II) and Fe(III) complexes from two closely heptadentate N-tripodal ligands, L1H(3) = tris[(imidazol-4-yl)-3-aza-3-butenyl]amine and L2H(3) = tris[(imidazol-2-yl)-3-aza-3-butenyl]amine, are described: three complexes in the L1 series (namely, [Fe(II)(L1H(3))](2+) and [Fe(III)(L1H(3))](3+) at low pH and [Fe(III)(L1)](0) at high pH) and three complexes in the L2 series (namely, [Fe(II)(L2H(3))](2+) at low pH and [Fe(II)(L2H)](0) and [Fe(III)(L2)](0) at high pH). Most of these complexes are stable in both Fe(II) and Fe(III) redox states and with the ligand in various protonation states. In the solid state, hydrogen bonds networks were obtained. Structural differences induced by 2- or 4-imidazole substitution are described and discussed. In solution, interconversions between different forms, with regard to oxidation and protonation states, were investigated by UV-visible spectroscopy, cyclic voltammetry, and potentiometry. The deprotonation pattern of these polyimidazole iron(II) and iron(III) complexes is described in detail. pK(a)s of the imidazolate/imidazole moieties in MeOH/H(2)O are reported. Two new species, namely, [Fe(II)(L1)](-) and [Fe(II)(L2)](-), were shown to be obtained in DMSO upon strong base addition and characterized by UV-vis spectroscopy and cyclic voltammetry. Half-wave potentials of Fe(III)/Fe(II) complexes with ligand moieties in several protonation states are reported, both in DMSO and in MeOH/H(2)O. Because of the presence of free imidazole groups coordinated to the iron, the potential of the iron(III)/iron(II) couples can be tuned by pH. A shift of DeltaE = E(deprot) - E(prot) ranging from -270 to -320 mV per exchanged proton in DMSO was measured. This study shows moreover that interconversions (with regard to both redox and protonation states) can be reversed several times. As the complexes have been isolated in order to be tested as superoxide dismutase mimics, preliminary reactions with dioxygen and with superoxide, considered as oxidant and reducer of biological importance, are reported. In these two series, O(2)(-) behaves either as a base or as a reducer and no adducts have been observed.     

Iron chelation properties of an extracellular siderophore exochelin MS

The coordination chemistry of an extracellular siderophore produced by Mycobacterium smegmatis, exochelin MS (ExoMS), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titrations. Exochelin MS has three hydroxamic acid groups for Fe(III) chelation and has four additional acidic protons from a carboxylic acid group and three primary amine groups, on the backbone of the molecule. The pK(a) values for the three hydroxamic acid moieties, the carboxylic acid group and the alkylammonium groups on ExoMS, correspond well with the literature values for these moieties. Equilibrium constants for proton-dependent Fe(III)-ExoMS equilibria were determined using a model involving the sequential protonation of the Fe(III)-ExoMS complexes at the first and second coordination shells. The equilibrium constants (beta) for the overall formation of Fe(III)ExoMS(H(3))(2+) and Fe(II)ExoMS(H(3))(+) from Fe((aq))(3+) or Fe((aq))(2+) and the deprotonated hydroxamate coordinating group form of the siderophore, ExoMS(H(3))(-), are calculated as log beta(III) = 28.9 and log beta(II) = 10.1. A calculated pFe value of 25.0 is very similar to that of other linear trihydroxamic acid siderophores, and indicates that ExoMS is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)-ExoMS/Fe(II)-ExoMS couple was determined from quasi reversible cyclic voltammograms at pH = 6.5 and found to be -380 mV.     

Iron chelation properties of an extracellular siderophore exochelin MN

The coordination chemistry of an extracellular siderophore produced by Mycobacterium neoaurum, exochelin MN (ExoMN), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titration techniques. Exochelin MN is of particular interest as it can efficiently transport iron into pathogenic M. leprae, which is responsible for leprosy, in addition to its own parent cells. The Fe(III) coordination properties of ExoMN are important with respect to understanding the Fe(III) acquisition and uptake mechanism in pathogenic M. leprae, as the siderophores from this organism are very difficult to isolate. Exochelin MN has two hydroxamic acid groups and an unusual threo-beta-hydroxy-l-histidine available for Fe(III) chelation. The presence of threo-beta-hydroxy-l-histidine gives rise to a unique mode of Fe(III) coordination. The pK(a) values for the two hydroxamic acid moieties, the histidine imidazole ring and the alkylammonium groups on ExoMN, correspond well with the literature values for these moieties. Proton-dependent Fe(III)- and Fe(II)-ExoMN equilibrium constants were determined using a model involving sequential protonation of the Fe(III)- and Fe(II)-ExoMN complexes. These data were used to develop a model whereby deprotonation reactions on the surface of the complex in the second coordination shell result in first coordination shell isomerization. The overall formation constants were calculated: log beta(110) = 39.12 for Fe(III)-ExoMN and 16.7 for Fe(II)-ExoMN. The calculated pFe value of 31.1 is one of the highest among all siderophores and their synthetic analogues and indicates that ExoMN is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)ExoMN/Fe(II)ExoMN(-) couple was determined to be -595 mV from quasi-reversible cyclic voltammograms at pH = 10.8, and the pH-dependent E(1/2) profile was used to determine the Fe(II)-ExoMN protonation constants.     

An iron reservoir model based on ferrichrome: iron(III)-binding and metal(III)-exchange properties of tripodal monotopic and ditopic hydroxamate ligands with an L-alanyl-L-alanyl-N-hydroxy-beta-alanyl sequence

To gain knowledge about biological iron mobilization, tripodal monotopic and ditopic hydroxamate ligands (1 and 2) are prepared, and their iron-chelating properties are investigated. Ligands 1 and 2 contain three Ala-Ala-beta-(HO)Ala units and three [Ala-Ala-beta-(HO)Ala](2) units connected with tris(alanylaminoethyl)amine, respectively, and form six-coordinate octahedral complexes with iron(III) in aqueous solution. Ligand 1 and 1 equiv of iron give Fe-1, and ligand 2 and 1 or 2 equiv of iron produce Fe(1)-2, or Fe(2)-2. These complexes exhibit absorptions at lambda(max) 425 nm of epsilon 2800-3000/Fe, characteristic of tris(hydroxamato)iron(III) complexes, and preferentially assume the Delta-cis configuration. Loading of Fe(III) on 1, 2, and M(III)-loaded ligands (M-1 and M(1)-2, M = Al, Ga, In) with ammonium ferric oxalate at pH 5.4 is performed, and the second-order rate constants of loading with respect to Fe(III) and the ligand or M(III)-loaded ligands are determined. The rates of loading of Fe(III) on M-1 increase in the order Al-1 < Ga-1 < In-1, and those on M(1)-2 in the order Al(1)-2 < Ga(1)-2 < Fe(1)-2 < In(1)-2, indicating that the dissociation tendency of M(III) ions from the hydroxamate ligand is an important factor. The iron complexes formed with 2 are subjected to an iron removal reaction with excess EDTA in aqueous pH 5.4 solution at 25.0 degrees C, and the collected data are analyzed by curve-fitting using appropriate first-order kinetic equations, providing the rate constants for the upper site and the lower site of 2. Similar analysis for FeM-2 affords removal rate constants for Fe(up)-2, M(up)-2, and Fe(low)-2, and the iron residence probability at each site. The protonation constants of the hydroxamate groups for 1 and 2 (pK(1,) pK(2), pK(3), and pK(1,) pK(2)., pK(6)) are determined, and the proton-independent stability constants for Fe-1, the upper site of Fe(2)-2, and the lower site of Fe(1)-2 are 10(28), 10(29), and 10(28.5), respectively.     

Investigation of the mechanism of formation of a thiolate-ligated Fe(III)-OOH

Kinetic studies aimed at determining the most probable mechanism for the proton-dependent [Fe(II)(S(Me2)N(4)(tren))](+) (1) promoted reduction of superoxide via a thiolate-ligated hydroperoxo intermediate [Fe(III)(S(Me2)N(4)(tren))(OOH)](+) (2) are described. Rate laws are derived for three proposed mechanisms, and it is shown that they should conceivably be distinguishable by kinetics. For weak proton donors with pK(a(HA)) > pK(a(HO(2))) rates are shown to correlate with proton donor pK(a), and display first-order dependence on iron, and half-order dependence on superoxide and proton donor HA. Proton donors acidic enough to convert O(2)(-) to HO(2) (in tetrahydrofuran, THF), that is, those with pK(a(HA)) < pK(a(HO(2))), are shown to display first-order dependence on both superoxide and iron, and rates which are independent of proton donor concentration. Relative pK(a) values were determined in THF by measuring equilibrium ion pair acidity constants using established methods. Rates of hydroperoxo 2 formation displays no apparent deuterium isotope effect, and bases, such as methoxide, are shown to inhibit the formation of 2. Rate constants for p-substituted phenols are shown to correlate linearly with the Hammett substituent constants σ(-). Activation parameters ((ΔH(++) = 2.8 kcal/mol, ΔS(++) = -31 eu) are shown to be consistent with a low-barrier associative mechanism that does not involve extensive bond cleavage. Together, these data are shown to be most consistent with a mechanism involving the addition of HO(2) to 1 with concomitant oxidation of the metal ion, and reduction of superoxide (an "oxidative addition" of sorts), in the rate-determining step. Activation parameters for MeOH- (ΔH(++) = 13.2 kcal/mol and ΔS(++) = -24.3 eu), and acetic acid- (ΔH(++) = 8.3 kcal/mol and ΔS(++) = -34 eu) promoted release of H(2)O(2) to afford solvent-bound [Fe(III)(S(Me2)N(4)(tren))(OMe)](+) (3) and [Fe(III)(S(Me2)N(4)(tren))(O(H)Me)](+) (4), respectively, are shown to be more consistent with a reaction involving rate-limiting protonation of an Fe(III)-OOH, than with one involving rate-limiting O-O bond cleavage. The observed deuterium isotope effect (k(H)/k(D) = 3.1) is also consistent with this mechanism.     

Thermodynamics, kinetics, and mechanism of the stepwise dissociation and formation of Tris(L-lysinehydroxamato)iron(III) in aqueous acid

pK(a) values for the hydroxamic acid, alpha-NH(3)(+), and epsilon-NH(3)(+) groups of L-lysinehydroxamic acid (LyHA, H(3)L(2+)) were found to be 6.87, 8.89, and 10.76, respectively, in aqueous solution (I = 0.1 M, NaClO(4)) at 25 degrees C. O,O coordination to Fe(III) by LyHA is supported by H(+) stoichiometry, UV-vis spectral shifts, and a shift in nu(CO) from 1648 to 1592 cm(-1) upon formation of mono(L-lysinehydroxamato)tetra(aquo)iron(III) (Fe(H(2)L)(H(2)O)(4)(4+)). The stepwise formation of tris(L-lysinehydroxamato)iron(III) from Fe(H(2)O)(6)(3+) and H(3)L(2+) was characterized by spectrophotometric titration, and the values for log beta(1), log beta(2), and log beta(3) are 6.80(9), 12.4(2), and 16.1(2), respectively, at 25 degrees C and I = 2.0 M (NaClO(4)). Stopped-flow spectrophotometry was used to study the proton-driven stepwise ligand dissociation kinetics of tris(L-lysinehydroxamato)iron(III) at 25 degrees C and I = 2.0 M (HClO(4)/NaClO(4)). Defining k(n) and k(-n) as the stepwise ligand dissociation and association rate constants and n as the number of bound LyHA ligands, k(3), k(-3), k(2), k(-2), k(1), and k(-1) are 3.0 x 10(4), 2.4 x 10(1), 3.9 x 10(2), 1.9 x 10(1), 1.4 x 10(-1), and 1.2 x 10(-1) M(-1) s(-1), respectively. These rate and equilibrium constants are compared with corresponding constants for Fe(III) complexes of acetohydroxamic acid (AHA) and N-methylacetohydroxamic acid (NMAHA) in the form of a linear free energy relationship. The role of electrostatics in these complexation reactions to form the highly charged Fe(LyHA)(3)(6+) species is discussed, and an interchange mechanism mediated by charge repulsion is presented. The reduction potential for tris(L-lysinehydroxamato)iron(III) is -214 mV (vs. NHE), and a comparison to other hydroxamic acid complexes of Fe(III) is made through a correlation between E(1/2) and pFe.     

Iron complexes of C- and N-methylated 2-aza-21-carbaporphyrin: NMR studies

Insertion of iron(II) into methylated derivatives of N-confused porphyrins 2-aza-2-methyl-5,10,15,20-tetraphenyl-21-carbaporphyrin (MeCTPPH)H, 2-aza-5,10,15,20-tetraphenyl-21-methyl-21-carbaporphyrin (CTPPMe)H2, and 2-aza-2-methyl-5,10,15,20-tetraphenyl-21-methyl-21-carbaporphyrin (MeCTPPMe)H yielded N- or C-methylated high-spin iron(II) complexes (MeCTPPH)Fe(II)Br, (HCTPPMe)Fe(II)Br, and (MeCTPPMe)Fe(II)Br. One electron oxidation of (Me-CTPPH)Fe(II)Br using Br2, accompanied by deprotonation of a C(21)-H(21) fragment and formation of an Fe-C(21) bond, produces an intermediate-spin, five-coordinate iron(III) complex (MeCTPP)Fe(III)Br. Simultaneously, a high-spin complex [(MeCTPPH)Fe(III)Br]+ was formed which preserved the side-on interaction between the metal ion and the inverted pyrrole ring. &[(MeCTPPH)Fe(III)Br]+ was also obtained by titration of (MeCTPP)FeIIIBr with TFA due to the C(21) protonation. A titration of (HCTPPMe)Fe(II)Br and (MeCTPPMe)Fe(II)Br with Br2 yielded solely corresponding high-spin iron(III) species [(HCTPPMe)Fe(III)Br+ and [(MeCTPPMe)Fe(III)Br+. Dioxygen reacts cleanly with (MeCTPPH)Fe(II)Br carbaporphyrin to form solely (MeCTPP)Fe(III)Br. The 1H NMR spectra of paramagnetic iron(II) and iron(III) complexes were examined. The characteristic patterns of pyrrole, C-methyl, and N-methyl resonances were found diagnostic of the ground electronic state of iron and the coordinating nature of the N-confused pyrrole. The characteristic C-Me resonances occur in a unique window (520-420 ppm) for iron(III) C-methylated N-confused porphyrins which remains in contrast with relatively small values found for iron(II) C-methylated derivatives (50-80 ppm).     

Proton-coupled electron transfer reactions at a heme-propionate in an iron-protoporphyrin-IX model compound

A heme model system has been developed in which the heme-propionate is the only proton donating/accepting site, using protoporphyrin IX-monomethyl esters (PPIX(MME)) and N-methylimidazole (MeIm). Proton-coupled electron transfer (PCET) reactions of these model compounds have been examined in acetonitrile solvent. (PPIX(MME))Fe(III)(MeIm)(2)-propionate (Fe(III)~CO(2)) is readily reduced by the ascorbate derivative 5,6-isopropylidine ascorbate to give (PPIX(MME))Fe(II)(MeIm)(2)-propionic acid (Fe(II)~CO(2)H). An excess of the hydroxylamine TEMPOH or of hydroquinone similarly reduces Fe(III)~CO(2), and TEMPO and benzoquinone oxidize Fe(II)~CO(2)H to return to Fe(III)~CO(2). The measured equilibrium constants, and the determined pK(a) and E(1/2) values, indicate that Fe(II)~CO(2)H has an effective bond dissociation free energy (BDFE) of 67.8 ± 0.6 kcal mol(-1). In these PPIX models, electron transfer occurs at the iron center and proton transfer occurs at the remote heme propionate. According to thermochemical and other arguments, the TEMPOH reaction occurs by concerted proton-electron transfer (CPET), and a similar pathway is indicated for the ascorbate derivative. Based on these results, heme propionates should be considered as potential key components of PCET/CPET active sites in heme proteins.     

Kinetic and mechanistic studies on the reaction of nitric oxide with a water-soluble octa-anionic iron(III) porphyrin complex

The polyanionic water-soluble and non-mu-oxo-dimer-forming iron porphyrin iron(III) 5(4),10(4),15(4),20(4)-tetra-tert-butyl-5(2),5(6),15(2),15(6)-tetrakis[2,2-bis(carboxylato)ethyl]-5,10,15,20-tetraphenylporphyrin, (P(8-))Fe(III) (1), was synthesized as an octasodium salt by applying well-established porphyrin and organic chemistry procedures to bromomethylated precursor porphyrins and characterized by standard techniques such as UV-vis and (1)H NMR spectroscopy. A single pK(a1) value of 9.26 was determined for the deprotonation of coordinated water in (P(8-))Fe(III)(H(2)O)(2) (1-H(2)()O) present in aqueous solution at pH <9. The porphyrin complex reversibly binds NO in aqueous solution to give the mononitrosyl adduct, (P(8-))Fe(II)(NO(+))(L), where L = H(2)O or OH(-). The kinetics of the binding and release of NO was studied as a function of pH, temperature, and pressure by stopped-flow and laser flash photolysis techniques. The diaqua-ligated form of the porphyrin complex binds and releases NO according to a dissociative interchange mechanism based on the positive values of the activation parameters DeltaS() and DeltaV() for the "on" and "off" reactions. The rate constant k(on) = 6.2 x 10(4) M(-1) s(-1) (24 degrees C), determined for NO binding to the monohydroxo-ligated (P(8-))Fe(III)(OH) (1-OH) present in solution at pH >9, is markedly lower than the corresponding value measured for 1-H(2)O at lower pH (k(on) = 8.2 x 10(5) M(-1) s(-1), 24 degrees C, pH 7). The observed decrease in the reactivity is contradictory to that expected for the diaqua- and monohydroxo-ligated forms of the iron(III) complex and is accounted for in terms of a mechanistic changeover observed for 1-H(2)O and 1-OH in their reactions with NO. The mechanistic interpretation offered is further substantiated by the results of water-exchange studies performed on the polyanionic porphyrin complex as a function of pH, temperature, and pressure.     

Homo-and heterodinuclear complexes of the tris(catecholamide) derivative of a tetraazamacrocycle with Fe3+, Cu2+ and Zn2+ metal ions

The new ditopic catecholamide 3,7,11-tris-{N-[3,4-(dihydroxybenzoyl)-aminopropyl]} derivative of a 14-membered tetraazamacrocycle containing pyridine (H(6)L(1)) has been synthesized. The protonation constants of (L(1))(6-) and the stability constants of its mono-, homo- and hetero-dinuclear complexes with Fe(3+), Cu(2+) and Zn(2+) metal ions were determined at 298.2 K and ionic strength 0.10 mol dm(-3) in KNO(3). The large overall basicity of the ligand was ascribed to the very high protonation constants of the catecholate groups, and its acid-base behaviour was correlated with the presence of tertiary nitrogen atoms and secondary amide functions. The UV-vis spectrum of the red solution of [FeL(1)](3-) complex exhibits the LMCT band of catecholate to iron(III), and its EPR spectrum revealed a typical isotropic signal of a rhombic distorted ferric centre in a high-spin state and E/D approximately 0.31, both characteristic of a tris-catecholate octahedral environment. The ligand forms with copper(II) and zinc(II) ions mono- and dinuclear protonated complexes and their stability constants were determined, except for the [ML(1)](4-) complexes as the last proton is released at very high pH. Electronic spectroscopic studies of the copper complexes revealed the involvement of catecholate groups in the coordination to the metal centre in the mono- and dinuclear copper(II) complexes. This information together with the determined stability constants indicated that the copper(II) ion can be involved in both types of coordination site of the ligand with comparable binding affinity. The EPR spectrum of [Cu(2)L(1)](2-) showed a well resolved seven-line hyperfine pattern of copper(II) dinuclear species typical of a paramagnetic triplet spin state with weak coupling between the two metal centres. Thermodynamically stable heterodinuclear complexes, [CuFeH(h)L(1)](h-1) (h = 0-3) and [CuZnH(h)L(1)](h-2) (h = 0-4), were formed as expected from a ditopic ligand having two dissimilar coordination sites. At physiological pH, the [CuFeL(1)](-) complex is formed at approximately 100%. The formation of the [CuFeH(h)L(1)](h-1) complexes in solution was supported by electronic spectroscopic measurements. The data indicated the specific coordination of each metal centre at the dissimilar sites of the ligand, the iron(III) bound to the oxygen donors of the catecholate arms and the copper(II) coordinated to the amine donors of the macrocyclic ring. The two metal centres are weakly coupled, due to the fairly large distance between them.     

Synthesis, solution behavior, thermal stability, and biological activity of an Fe(III) complex of an artificial siderophore with intramolecular hydrogen bonding networks

Previously, an artificial siderophore complex, the iron(III) complex with tris[2-[(N-acetyl-N-hydroxy)glycylamino]ethyl]amine (TAGE), was constructed in order to understand the effect of intramolecular hydrogen bonding interaction on the siderophore function, and its structural characterization in the solid state was reported (Inorg. Chem. 2001, 40, 190). In this paper, the solution behavior of the M(III)-TAGE (M = Fe, Ga) system has been investigated using (1)H NMR, UV-vis, and FAB mass spectroscopies in efforts to characterize the biological implication of hydrogen bonding networks between the amide hydrogens and coordinating aminohydroxy oxygens of the complex. The temperature dependence of (1)H NMR spectra for Ga(III) complex of TAGE indicates that hydrogen bonding networks are maintained in polar solvents such as DMSO-d(6) and D(2)O. The UV-vis spectra of the Fe(III)-TAGE system under various pH conditions have shown that TAGE forms a tris(hydroxamato)iron(III) complex in an aqueous solution in the pH range 4-8. By contrast, tris[2-[(N-acetyl-N-hydroxy)propylamido]ethyl]amine (TAPE; TAGE analogue that is difficult to form intramolecular hydrogen bonding networks), which has been synthesized as a comparison of TAGE, forms both of bis- and tris(hydroxamato)iron(III) complexes in the same pH range. Both the stability constants (log beta(FeTAGE) = 28.6; beta(FeTAGE) = [Fe(III)TAGE]/([Fe(3+)][TAGE(3)(-)])) and pM (-log[Fe(3+)]) value for Fe(III)TAGE (pM 25) are comparable to those of a natural siderophore ferrichrome (log beta = 29.1 and pM 25.2). The kinetic study of the TAGE-Fe(III) system has given the following rate constants: the rate of the ligand exchange reaction between Fe(III)TAGE and EDTA is 6.7 x 10(-4) s(-1), and the removal rates of iron from diferric bovine plasma transferrin by TAGE are 2.8 x 10(-2) and 6.0 x 10(-3) min(-1). These values are also comparable to those of a natural siderophore desferrioxamine B under the same conditions. In a biological activity experiment, TAGE has promoted the growth of the siderophore-auxotroph Gram-positive bacterium Microbacterium flavescens, suggesting that TAGE mimics the activity of ferrichrome. These results indicate that the artificial siderophore with intramolecular hydrogen bonding networks, TAGE, is a good structural and functional model for a natural ferrichrome.     

Synthesis, structure, and solution properties of [(mim-TASN)FeCl2]+ and its μ-oxo derivative

A series of iron(III) complexes based on the tetradentate ligand 4-((1-methyl-1H-imidazol-2-yl)methyl)-1-thia-4,7-diazacyclononane (L) has been synthesized, and their solution properties investigated. Addition of FeCl(3) to methanol solutions of L yields [LFeCl(2)]FeCl(4) as a dark red solid. X-ray crystallographic analysis reveals a pseudo-octahedral environment around iron(III) with the three nitrogen donors of L coordinated facially. Ion exchange reactions with NaPF(6) in methanol facilitate chloride exchange resulting in a different diastereomer for the [LFeCl(2)](+) cation. X-ray analysis of [LFeCl(2)]PF(6) finds meridional coordination of the three nitrogen donors of L. Electrochemical studies of [LFeCl(2)](+) in acetonitrile display a single Fe(III)/(II) reduction potential at -280 mV versus ferrocenium/ferrocene. In methanol, a broad cathodic wave is observed because of partial exchange of one chloride for methoxide with half-potentials of -170 mV and -440 mV for [LFeCl(2)](+/0) and [LFeCl(OCH(3))](+/0), respectively. The equilibrium constants for chloride exchange are 7 × 10(-4) M(-1) for Fe(III) and 2 × 10(-8) M(-1) for Fe(II). In aqueous solutions chloride exchange yields three accessible complexes as a function of pH. Strongly acidic conditions yield the aqua complex [LFeCl(OH(2))](2+) with a measured pK(a) of 3.8 ± 0.1. Under mildly acidic conditions, the μ-OH complex [(LFeCl)(2)(OH)](3+) with a pK(a) of 6.1 ± 0.3 is obtained. The μ-oxo complex [(LFeCl)(2)(O)](2+) is favored under basic conditions. The diiron Fe(III)/Fe(III) complexes [(LFeCl)(2)(OH)](3+) and [(LFeCl)(2)(O)](2+) can be reduced by one electron to the mixed valence Fe(III)/Fe(II) derivatives at -170 mV and -390 mV, respectively. From pH dependent voltammetric studies, the pK(a) of the mixed valent μ-OH complex [(LFeCl)(2)(OH)](2+) is calculated at 10.3.     

Voltammetric study of interfacial electron transfer between bis(cyclopentadienyl)iron in organic solvents and hexacyanoferrate in water.

The electron-transfer reaction between bis(cyclopentadienyl)iron(II) ([Fe(II)(C5H5)2]) in nitrobenzene and a hexacyanoferrate redox couple ([Fe(II/III)(CN)6](4-/3-)) in water at the nitrobenzene / water interface was studied using normal pulse voltammetry. The voltammetric results indicate that the electron-transfer reaction takes place by way of a so-called ion-transfer (IT) mechanism, of which the forward and backward rate constants of the homogeneous electron-transfer reaction between [Fe(II/III)(C5H5)2](0/+) and [Fe(II/III)(CN)6](4-/3-) in the water phase have been determined. The electron-transfer reaction between [Fe(II)(C5H5)2] in 1,2-dichloroethane and [Fe(II/III)(CN)6](4-/3-) in water at the 1,2-dichloroethane / water interface was shown to also take place by the IT-mechanism.     

Proton control of oxidation and spin state in a series of iron tripodal imidazole complexes

Reaction of iron salts with three tripodal imidazole ligands, H(3)(1), H(3)(2), H(3)(3), formed from the condensation of tris(2-aminoethyl)amine (tren) with 3 equiv of an imidazole carboxaldehyde yielded eight new cationic iron(III) and iron(II), [FeH(3)L](3+or2+), and neutral iron(III), FeL, complexes. All complexes were characterized by EA(CHN), IR, UV, M?ssbauer, mass spectral techniques and cyclic voltammetry. Structures of three of the complexes, Fe(2).3H(2)O (C(18)H(27)FeN(10)O(3), a = b = c = 20.2707(5), cubic, I3d, Z = 16), Fe(3).4.5H(2)O (C(18)H(30)FeN(10)O(4.5), a = 20.9986(10), b = 11.7098(5), c = 19.9405(9), beta = 109.141(1), monoclinic, P2(1)/c), Z = 8), and [FeH(3)(3)](ClO(4))(2).H(2)O (C(18)H(26)Cl(2)FeN(10)O(9), a = 9.4848(4), b = 23.2354(9), c = 12.2048(5), beta = 111.147(1) degrees, monoclinic, P2(1)/n, Z = 4) were determined at 100 K. The structures are similar to one another and feature an octahedral iron with facial coordination of imidazoles and imine nitrogen atoms. The iron(III) complexes of the deprotonated ligands, Fe(1), Fe(2), and Fe(3), are low-spin while the protonated iron(III) cationic complexes, [FeH(3)(1)](ClO(4))(3) and [FeH(3)(2)](ClO(4))(3), are high-spin and spin-crossover, respectively. The iron(II) cationic complexes, [FeH(3)(1)]S(4)O(6), [FeH(3)(2)](ClO(4))(2), [FeH(3)(3)](ClO(4))(2), and [FeH(3)(3)][B(C(6)H(5))(4)](2) exhibit spin-crossover behavior. Cyclic voltammetric measurements on the series of complexes show that complete deprotonation of the ligands produces a negative shift in the Fe(III)/Fe(II) reduction potential of 981 mV on average. Deprotonation in air of either cationic iron(II) or iron(III) complexes, [FeH(3)L](3+or2+), yields the neutral iron(III) complex, FeL. The process is reversible for Fe(3), where protonation of Fe(3) yields [FeH(3)(3)](2+).     

Spectrophotometric studies on ion-pair extraction equilibria of the iron(ii) and iron(III) complexes with 4-(2-pyridylazo)resorcinol

The ion-pair extraction equilibria of the iron(II) and iron(III) chelates of 4-(2-pyridylazo)resorcinol (PAR, H(2)L) are described. The anionic chelates were extracted into chloroform with benzyldimethyltetradecylammonium chloride (QC1) as counter-ion. The extraction constants were estimated to be K(ex1)(Fe(II)) = [Q{Fe(II)(HL)L}](0)/[Q(+)][{Fe(II)(HL)L}(-)] = 10(8.59 +/- 0.11), K(ex2)(Fe(II)) = [Q(2){Fe(II)L(2)}](o)/ [Q(+)](2)[{Fe(II)L(2)}(2-)] = 10(12.17 +/- 0.10) and K(ex1)(Fe(III)) = [Q{Fe((III))L(2)}](o)/(Q(+)][{Fe(III)L(2)}(-)] = 10(6.78 +/- 0.15) at I = 0.10 and 20 degrees , where [ ](o) is concentration in the chloroform phase. Aggregation of Q{Fe(III)L(2)} in chloroform was observed and the dimerization constant (K(d) = [Q(2){Fe(III)L(2)}(2)](o)/[Q{Fe(III)L(2)}](o)(2)) was evaluated as log K(d) = 4.3 +/- 0.3 at 20 degrees . The neutral chelates of {Fe(II)(HL)(2)} and {Fe(III)(HL)L}, and the ion-pair of the cationic chelate, {Fe(III)(HL)(2)}ClO(4), were also extracted into chloroform or nitrobenzene. The relationship between the forms and extraction properties of the iron(II) and iron(III) PAR chelates are discussed in connection with those of the nickel(II) and cobalt(III) complexes. Correlation between the extraction equilibrium data and the elution behaviour of some PAR chelates in ion-pair reversed-phase partition chromatography is also discussed.     

Monomeric MnIII/II and FeIII/II complexes with terminal hydroxo and oxo ligands: probing reactivity via O-H bond dissociation energies

Non-heme manganese and iron complexes with terminal hydroxo or oxo ligands are proposed to mediate the transfer of hydrogen atoms in metalloproteins. To investigate this process in synthetic systems, the monomeric complexes [M(III/II)H(3)1(OH)](-/2-) and [M(III)H(3)1(O)](2-) have been prepared, where M(III/II) = Mn and Fe and [H(3)1](3-) is the tripodal ligand, tris[(N'-tert-butylureaylato)-N-ethyl)]aminato. These complexes have similar primary and secondary coordination spheres, which are enforced by [H(3)1](3-). The homolytic bond dissociation energies (BDEs(O-H)) for the M(III/II)-OH complexes were determined, using experimentally obtained values for the pK(a)(M-OH) and E(1/2) measured in DMSO. This thermodynamic analysis gave BDEs(O-H) of 77(4) kcal/mol for [Mn(II)H(3)1(O-H)](2-) and 66(4) kcal/mol for [Fe(II)H(3)1(O-H)](2-). For the M(III)-OH complexes, [Mn(III)H(3)1(OH)]- and [Fe(III)H(3)1(OH)]-, BDEs(O-H) of 110(4) and 115(4) kcal/mol were obtained. These BDEs(O-H) were verified with reactivity studies with substrates having known X-H bond energies (X = C, N, O). For instance, [Fe(II)H(3)1(OH)](2-) reacts with a TEMPO radical to afford [Fe(III)H(3)1(O)](2-) and TEMPO-H in isolated yields of 60 and 75%, respectively. Consistent with the BDE(O-H) values for [Mn(II)H(3)1(OH)](2-), TEMPO does not react with this complex, yet TEMPO-H (BDE(O-H) = 70 kcal/mol) reacts with [Mn(III)H(3)1(O)](2-), forming TEMPO and [Mn(II)H(3)1(OH)](2-). [Mn(III)H(3)1(O)](2-) and [Fe(III)H(3)1(O)](2-) react with other organic substrates containing C-H bonds less than 80 kcal/mol, including 9,10-dihydroanthracene and 1,4-cyclohexadiene to produce [M(II)H(3)1(OH)](2-) and the appropriate dehydrogenated product in yields of greater than 80%. Treating [Mn(III)H(3)1(O)](2-) and [Fe(III)H(3)1(O)](2-) with phenolic compounds does not yield the product expected from hydrogen atom transfer but rather the protonated complexes, [Mn(III)H(3)1(OH)]- and [Fe(III)H(3)1(OH)]-, which is ascribed to the highly basic nature of the terminal oxo group.     

基于三联吡啶衍生物的Fe~(2+)/Fe~(3+)化学比色敏感器

合成和表征了一种新的化合物(E)-4-′(4-(2-(2-萘)乙烯基)苯基)-2,2′:6′,2″-三联吡啶L.用Fe2+或Fe3+来滴定时,L的溶液(三氯甲烷和乙醇的体积比为1∶20)颜色分别从无色变成洋红色和橙红色,相应的紫外可见吸收光谱都在374和574 nm出现特征吸收峰.此外,即使存在其它过量金属阳离子时,L对Fe2+或Fe3+离子仍然表现出很强的敏感性和选择性.另外,还研究了L对Fe2+或Fe3+离子及两者共同存在时的线性检测浓度范围和最低检测极限(LOD).     

4,2-Ribbon like ferromagnetic cyano-bridged Fe(III)2Ni(II) chains: a magneto-structural study

The low-spin iron(III) complex AsPh(4)[Fe(III)(bpy)(CN)(4)].CH(3)CN (1) [AsPh(4) = tetraphenylarsonium cation] and the heterobimetallic chains [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)].4H(2)O with L = bpy (2) and phen (3) [bpy = 2,2'-bipyridine and phen = 1,10-phenanthroline] have been prepared and their structures determined by X-ray diffraction methods. The structure of 1 consists of mononuclear [Fe(bpy)(CN)(4)](-) anions, tetraphenylarsonium cations and acetonitrile molecules of crystallization. The iron(III) is hexacoordinated with two nitrogen atoms of the bidentate bpy and four carbon atoms of four terminal cyanide groups building a distorted octahedral surrounding around the metal atom. 2 and 3 are isomorphous compounds whose structure is made up of neutral 4,2-ribbon like bimetallic chains of formula [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)] where the [Fe(III)(L)(CN)(4)](-) unit acts as a bis-monodentate bridging ligand toward the trans-diaquanickel(II) units through two of its four cyanide groups in cis positions. The chains exhibit two orientations in the unit cell and they interact with each other through hydrogen bonds involving the coordination and crystallization water molecules together with the uncoordinated cyanide nitrogen atoms of the [Fe(L)(CN)(4)](-) units. Compounds 2 and 3 behave as ferromagnetic Fe(III)(2)Ni(II) chains which interact ferromagnetically at very low temperatures in the case of 2, whereas metamagnetic-like behaviour is observed for with a critical field (H(c)) around 200 G. For H > H(c) the ferromagnetic Fe(III)(2)Ni(II) chains of 3 exhibit a frequency dependence of the out-of-phase ac susceptibility signal at T < 3.5 K.