DFT study and IR spectra of hexaphenoxycyclotriphosphazene generation phosphorus dendrimer

The infrared (150–3500 cm⁻¹) spectra have been recorded for hexaphenoxycyclotriphosphazene [NP(OPh)₂]₃ and all-D isotope specie. These compounds include a cyclotriphosphazene core and terminal phenoxy groups of elementoorganic dendrimers. The structural optimization and normal mode analysis are performed for elementoorganic dendrimer on the basis of the ab initio density functional theory. It is found that the dendrimer exists in a single stable conformation with slightly non-planar cyclotriphosphazene core. Relying on DFT calculations a complete vibrational assignment is proposed for different parts of the studied dendrimers. The softness of sulphur atom in the thiophosphoryl core to nucleophilic attack is higher than the softness of the atoms of the cyclotriphosphazene core. The reactivity of the core is less than that of terminal groups.     

Raman and infrared spectra, conformational stability, ab initio calculations and vibrational assignments for 2-chloroethyl silane

The infrared (3500–30 cm⁻¹) spectra of gaseous and solid and the Raman (3500–10 cm⁻¹) spectra of liquid with quantitative depolarization ratios and solid 2-chloroethyl silane, ClCH₂CH₂SiH₃, have been recorded. Similar data have been recorded for the Si–d₃ isotopomer. These data indicate that two conformers, trans and gauche, are present in the fluid states but only one conformer, trans, is present in the solid. The mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (−55 to −100°C) has been recorded. The enthalpy difference between the conformers has been determined to be 181±12 cm⁻¹ (2.17±0.14 kJ/mol) with the trans rotamer the more stable form. From the isolated Si–H frequencies from the Si–d₂ isotopomer the r_o Si–H distances of 1.484 and 1.483 Å for the trans and 1.481 for the gauche conformers have been obtained. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G** from which structural parameters and conformational stabilities have been determined. With all the basis sets the trans form is predicted to be the more stable conformer which is consistent with the experimental results. These results are compared to the corresponding quantities for the carbon analogue.     

On the vibrational spectra and conformational stability of 1,1-dimethylhydrazine from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

Variable temperature (−105 to −150 °C) studies of the infrared spectra (3500–400 cm⁻¹) of 1,1-dimethylhydrazine, (CH₃)₂NNH₂, in liquid krypton have been carried out. No convincing spectral evidence could be found for the trans conformer which is expected to be at least 600 cm⁻¹ less stable than the gauche form. The structural parameters, dipole moments, conformational stability, vibrational frequencies, and infrared and Raman intensities have been predicted from MP2/6-31G(d) ab initio calculations. The predicted infrared and Raman spectra are compared to the experimental ones. The adjusted r₀ parameters from MP2/6-311+G(d,p) calculations are compared to those reported from an electron diffraction study. The energy differences between the gauche and trans conformers have been obtained from MP2 ab initio calculations as well as from density functional theory by the B3LYP method calculations from a variety of basis sets. All of these calculations indicate an energy difference of 650–900 cm⁻¹ with the B3LYP calculations predicted the larger values. The potential function governing the conformational interchange has been predicting from both types of calculations and comparisons have been made. The barrier to internal rotation by the independent rotor model of the inner methyl group is predicted to have a value of 1812 cm⁻¹ and that of the outer one of 1662 cm⁻¹ from ab initio MP2/6-31G(d) calculations. These values agree well with the experimentally determined values of 1852±16 and 1558±12 cm⁻¹, respectively, from a fit of the torsional transitions with the coupled rotor model. For the coupled rotor model the predicted V′₃₃ (sin 3τ₀ sin 3τ₁ term) value which ranged from 190 to 232 cm⁻¹ is in reasonable agreement with the experimental value of 268±3 cm⁻¹ but the predicted V₃₃ (cos 3τ₀ cos 3τ₁ term) value of −73 to −139 cm⁻¹ is 25% smaller and of the opposite sign of the experimental value of 333±22 cm⁻¹. These theoretical and spectroscopy results are compared to similar quantities of some corresponding molecules.     

Spectroscopic properties of K5Li2UF10

A new uranium (III) fluoro-complex of the formula K₅Li₂UF₁₀ has been synthesised and characterised by X-ray powder diffraction and electronic absorption spectra measurements. The compound crystallises in the orthorhombic system, space group Pnma, with a = 20.723, b = 7.809, c = 6.932 Å, V = 1121.89 ų, Z = 4 and is isostructural with its K₅Li₂NdF₁₀ and K₅Li₂LaF₁₀ analogous. The absorption spectrum of a polycrystalline sample of K₅Li₂UF₁₀ was recorded at 4.2 K in the 3500–45,000 cm⁻¹ range and is discussed. The observed crystal-field levels were assigned and fitted to parameters of the simplified angular overlap model (AOM) and next to those of a semi-empirical Hamiltonian, which was representing the combined atomic and one-electron crystal-field interactions. The starting values of the AOM parameters were obtained from ab initio calculations. The analysis of the spectra enabled the assignment of 71 crystal-field levels of U³⁺ with a relatively small r.m.s. deviation of 37 cm⁻¹. The total splitting of 714 cm⁻¹ was calculated for the ⁴I_9/2 ground multiplet.     

Conformational stability of 1-bromo-2-fluoroethane from temperature dependent FT-IR spectra of rare gas solutions

Variable temperature (−55 to −135°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-bromo-2-fluoroethane, BrCH₂CH₂F, dissolved in liquid krypton and xenon have been recorded. From these data, the enthalpy difference has been determined to be 108±9 cm⁻¹ (1.296±0.113 kJ/mol) and 112±8 cm⁻¹ (1.346±0.098 kJ/mol) from the krypton and xenon solutions, respectively, with the trans conformer the more stable rotamer. Complete vibrational assignments are presented for both conformers which are consistent with the predicted frequencies obtained from the ab initio MP2/6-31G^* calculations. The optimized geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been obtained from RHF/6-31G^* and/or MP2/6-31G^* ab initio calculations. These quantities are compared to the corresponding experimental quantities when appropriate. Structural parameters and conformational stability have also been obtained from MP2/6-311+G^** calculations. Combining the ab initio predicted structural parameters with the microwave rotational constants, r_o parameters have been obtained for the gauche conformer.     

Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Infrared, and Raman spectra, conformational stability, normal coordinate analysis, ab initio calculations, and vibrational assignment of 1-chlorosilacyclobutane

The infrared spectra (3500–40 cm⁻¹) of gaseous and solid and the Raman spectra (3500–30 cm⁻¹) of liquid and solid 1-chlorosilacyclobutane, c-C₃H₆SiClH, have been obtained. Both the axial and equatorial conformers with respect to the chlorine atom have been identified in the fluid phases. Variable temperature (−105 to −150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 211±17 cm⁻¹ (2.53±0.21 kJ/mol), with the equatorial conformer being the more stable form and the only conformer remaining in the annealed solid. At ambient temperatures, approximately 26% of the axial conformers are present in the vapor phase. A complete vibrational assignment is proposed for the equatorial conformer, and many of the fundamentals of the axial conformers have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been determined for both rotamers by ab initio calculations employing the 6-31G(d) basis set at the levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. Structural parameters have also been obtained using MP2/6-311+G(d,p) ab initio calculations. The r₀ parameters for both conformers are obtained from a combination of the ab initio predicted values and the twelve previously reported microwave rotational constants. The results are discussed and compared to those obtained for some similar molecules.     

Conformational stability of 1-pentyne from temperature dependent FT-IR spectra of liquid rare gas solutions and ab initio calculations

Variable temperature studies of the infrared spectra (3500–400 cm⁻¹) of 1-pentyne, CH₃CH₂CH₂CCH, dissolved in liquid xenon (−55 to −100°C) and liquid krypton (−105 to −150°C) have been recorded. These data indicate that the anti (methyl group trans to the acetylenic group) and gauche conformers have relative concentrations that vary with the temperature, i.e. enthalpy nonzero. Utilizing seven sets of conformer pairs for the xenon solution and ten sets of conformer pairs for the krypton solution, the enthalpy difference has been determined to be 50±6 cm⁻¹ (0.60±0.07 kJ/mol) and 45±4 cm⁻¹ (0.54±0.05 kJ/mol), respectively, with the anti conformer the more stable form. Because of two equivalent gauche forms, this conformer is estimated to be in higher abundance at 61±1% in the xenon solution and 62±1% in the krypton solution. Optimized geometries and conformational stabilities have been obtained from ab initio calculations with basis sets 6-31G(d), 6-311+G(d,p), 6-311+G(2d,2p) and 6-311+G(2df,2pd) with full electron correlation by the perturbation method to second order (MP2). All of the calculations predict the gauche rotamer to be the more stable form with a high value of 181 cm⁻¹ from the MP2/6-311+G(d,p) calculations and a low value of 107 cm⁻¹ from the MP2/6-311+G(2d,2p) calculation. The r_o adjusted structural parameters have been obtained from a combination of the microwave rotational constants and ab initio predicted parameters. The values are compared to the recently reported values from an electron diffraction study where the value for the CC bond distance appears to be too long. The results are discussed and the conformational stability is compared to those obtained for some similar molecules.     

Conformational studies of cyclopropylmethyl isocyanate from temperature dependent FT-IR spectra of xenon solutions and ab initio calculations

Variable temperature (−55 to −100 °C) studies of the infrared spectra (3200 to 100 cm⁻¹) of cyclopropylmethyl isocyanate, c-C₃H₅CH₂NCO, dissolved in liquefied xenon, have been carried out. The infrared spectra (gas and solid) as well as the Raman spectrum of the liquid have been recorded from 3200 to 100 cm⁻¹. By analyzing six conformer pairs in xenon solutions, an enthalpy difference of 193 ± 19 cm⁻¹ (2.31 ± 0.23 kJ/mol) was obtained with the gauche–cis rotamer (the first designation indicates the orientation of the CNCO group with respect to the three-membered ring, the second designation indicates the relative orientation of the NCO group with respect to the bridging CC bond) the more stable form and the only form present in polycrystalline solid. The abundance of the cis–trans conformer present at ambient temperature is 16 ± 1%. The potential function governing the conformational interchange has been obtained from B3LYP/6-31G(d) calculations and the two-dimensional potential has been obtained. From MP2 ab initio calculations utilizing various basis sets with diffuse functions, the gauche–cis conformer is predicted to be more stable by 223 to 269 cm⁻¹, which is consistent with the experimental results. However, without diffuse functions the predicted conformational energy differences are much smaller (77–166 cm⁻¹). Similar diffuse function dependency affects density functional theory calculations by the B3LYP method to a lesser extent. A complete vibrational assignment for the gauche–cis conformer is proposed and several fundamentals for the cis–trans conformer have been identified. The structural parameters, dipole moments, conformational stability, vibrational frequencies, infrared intensities and Raman activities have been predicted from ab initio calculations and r₀ structural parameters are estimated. These experimental and theoretical results are compared to the corresponding quantities of some similar molecules.     

Conformational and structural studies of 1-chloropropane and 1-bromopropane from temperature-dependant FT-IR spectra of rare gas solutions and ab initio calculations

Variable temperature (−55 to −150°C) studies of the infrared spectra (3500–400 cm⁻¹) of 1-chloropropane (CH₃CH₂CH₂Cl) and 1-bromopropane (CH₃CH₂CH₂Br) dissolved in liquid krypton and xenon, respectively, have been recorded. Utilizing two conformer pairs in krypton solution for chloride and three conformer pairs in xenon solution for bromide, enthalpy differences of 52±3 cm⁻¹ (0.62±0.06 kJ/mol) and 72±7 cm⁻¹ (0.86±0.08 kJ/mol) were obtained for the chloride and bromide, respectively, with the gauche form being the more stable conformer for both molecules. From these data, it is estimated that 28 and 26% of trans form are present at ambient temperature for the chloride and bromide, respectively. The conformation stabilities, harmonic force constants, fundamental frequencies, infrared intensities and Raman activities have been obtained from RHF/6-31G(d) and/or MP2/6-31G(d) ab initio calculations for both halopropanes and these quantities have been compared to the experimental values when appropriate. The optimized geometries have also been obtained with several different ab initio basis sets with full electron correlation by the perturbation method up to MP2/6-311+G(2d,2p). The r₀ structural parameters of both halopropanes have been obtained by combining the ab initio data with the previously reported microwave rotational constants for both conformers. The quantities are compared to the corresponding results for some similar molecules.     

Gaseous nitryl azide N4O2: A joint theoretical and experimental study

Gaseous nitryl azide N₄O₂ is generated by the heterogeneous reaction of gaseous ClNO₂ with freshly prepared AgN₃ at −50 °C. The geometric and electronic structure of the molecule in the gas phase has been characterized by in situ photoelectron spectroscopy (PES) and quantum chemical calculations. The experimental first vertical ionization energy of N₄O₂ is 11.39 eV, corresponding to the ionization of an electron on the highest occupied molecular orbital (HOMO) {4a″(π_{nb(N4–N5–N6)})}⁻¹. An apparent vibrational spacing of 1600 ± 60 cm⁻¹ (ν_asO1N2O3) on the second band at 12.52 eV (π_{nb(O1–N2–O3)}) further confirms the preference of energetically stable chain structure in the gas phase. To complement the experimental results, the potential-energy surface of this structurally novel transient molecule is discussed. Both calculations and spectroscopic results suggest that the molecule adopts a trans-planar chain structure, and a five-membered ring decomposition pathway is more favorable.     

A study of the Raman spectra of alkanes in the Fermi-resonance region

The experimental and theoretically predicted Raman spectra for the first few alkanes in the homologous series: methane, ethane, propane and butane are presented for the region 2700–3100 cm⁻¹. The structure of the spectra is rather complex. Analysis of the results obtained shows that Fermi resonance occurs between the CH stretching vibrations in the 3000 cm⁻¹ region and the 2ν overtones of deformation vibrations in the low frequency (1450–1500 cm⁻¹) region.     

Conformational and structural studies of 1-fluorosilacyclobutane from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

The infrared spectra (3500 to 40 cm⁻¹) of gaseous and solid and the Raman spectra (3500 to 30 cm⁻¹) of liquid and solid 1-fluorosilacyclobutane, c-C₃H₆SiFH, have been obtained. Both the axial and equatorial conformers with respect to the fluorine atom have been identified in the fluid phases. Variable temperature (−105 to −150 °C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 282 ± 27 cm⁻¹ (3.37 ± 0.32 kJ/mol), with the equatorial conformer the more stable form and the only conformer remaining in the annealed solid. At ambient temperature there is approximately 21 ± 2% of the axial conformer present in the vapor phase. From isolated Si–H stretching frequencies the Si–H (r₀) distances are calculated to be 1.484 and 1.485 Å for the equatorial and axial conformers, respectively. Structural parameters have been predicted from MP2/6-311 + G(d,p) ab initio calculations and the adjusted r₀ parameters for both conformers were obtained from a combination of the ab initio predicted values and the six previously reported microwave rotational constants. Along with the Si–H bond distance, the Si–C, and C–C distances of 1.865(5), and 1.571(5) Å, respectively, for the equatorial conformer are significantly different from the values for these parameters previously reported from an election diffraction study. Both the SiC and CC distances and the SiF distance are longer by 0.002 and 0.004 Å, respectively, for the axial conformer. Structural parameters have also been obtained for silacyclobutane, c-C₃H₆SiH₂ and ethylsilylfluoride, CH₃CH₂SiH₂F, from combined ab initio predicted values and previously reported rotational constants. Several of these newly determined parameters are significantly different from those previously reported for both molecules. Complete equilibrium geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been determined for both rotamers by ab initio calculations employing the 6-31G(d) basis set at the level of Moller–Plesset (MP) to second order. A complete vibrational assignment supported by normal coordinate calculations is proposed for the equatorial conformer, and several of the fundamentals of the axial conformer have also been identified. The results are discussed and compared to corresponding quantities for some similar molecules.     

Spectroscopic and structural analysis of Ca substituted La orthoferrite

Samples of orthoferrites La_1−xCa_xFeO₃ (0.15≤x≤0.45) were synthesized by double sintering ceramic technique. X-ray diffraction and infrared spectroscopy experiments were carried out and discussed for the investigated samples. The data showed the formation of single-phase orthorhombic structure of space group Pbnm. The FTIR spectra were performed in the region (1200–200 cm⁻¹). Four main absorption bands were present with some side bands and shoulders in the range (1200–400 cm⁻¹). Another four bands were appeared in the range (400–200 cm⁻¹). The positions, intensities and values of the absorptions bands vary depending on the Ca content in the samples. The first absorption band appeared at about 920 cm⁻¹ was assigned to the La–O stretching vibration.     

Thermal degradation of biodegradable edible films based on xanthan and starches from different sources

Films based on xanthan/wheat starch and xanthan/maize starch were prepared in different proportions and analysed in terms of thermal stability in relation to the degradation reaction in an inert atmosphere. The main gaseous decomposition products were identified by infrared spectroscopy. Xanthan was found to be less thermally stable than starch from different sources. The starch addition to xanthan induced an increase in the film thermal stabilities. The thermal degradation mechanism of xanthan starts with scission of the side chain groups with subsequent scission of the main chain. Starches from maize and wheat presented a constant mechanism of thermal degradation. The proportion of xanthan/starch (50/50) presented a synergistic behaviour which may be associated with changes in the mechanism of the thermal degradation process. The FTIR spectra of the gaseous products during thermal degradation of xanthan showed a broad absorption in the 2750–3300 cm⁻¹ region, probably indicating decomposition of β-d-mannopyranosyl groups, present in xanthan side chains. For pure starches, absorptions related to alcohol O–H stretching (3500–3750 cm⁻¹), CO stretching of CO₂, CO and carbonyl compounds (2361, 2177 and 1743 cm⁻¹, respectively) were observed. For xanthan/starch mixtures (50/50) the same compounds as those for the pure polymer degradation were evolved. However, a shift of the CO to higher wavenumber values indicates that new carbonyl compounds are being formed due to changes in the thermal degradation mechanism.     

The effect of hydrogen bonding interactions between 2-[4-(dimethylamino)phenyl]-3-hydroxy-4H-chromene-4-one in the ground and excited states and dimethylsulfoxide or methanol on electronic absorption and emission transitions

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.     

FT-IR, FT-Raman spectra, density functional computations of the vibrational spectra and molecular geometry of biomolecule 5-aminouracil

FT-IR and FT-Raman spectra of the biomolecule 5-aminouracil were recorded in the regions 400–4000 cm⁻¹ and 10–3500 cm⁻¹, respectively. The observed vibrational wavenumbers were analyzed and assigned to different normal modes of vibration of the molecule. Density functional calculations were performed to support wavenumber assignments of the observed bands. A comparison with the molecule of uracil was made, and specific scale factors were employed in the predicted wavenumbers of 5-aminouracil. With the purpose of study the important molecule 5-aminouracil, its equilibrium geometry and harmonic wavenumbers were calculated for the first time by the B3LYP DFT method. The vibrational wavenumbers were compared with IR and Raman experimental data. Also good reproduction of the experimental wavenumbers is obtained and the % error is very small. All the tautomeric forms of 5-aminouracil were determined and optimized. The dimer forms were also simulated. The energy, atomic charges and dipole moments were discussed and several general conclusions were underlined.     

The rovibrational analysis of the high-resolution IR spectrum of CD2HF below 1200 cm: an interacting tetrad of vibrational levels

The spectrum of CD₂HF was measured by high-resolution interferometric Fourier-transform IR (FTIR) spectroscopy (apodised instrumental band with:0.004 cm⁻¹ fwhm) between 800 and 1200 cm⁻¹ covering the four lowest fundamentals. A complete rotational analysis using a semi-automatic assignment procedure yields accurate band centres (ν₉: 912.2028 cm⁻¹, ν₆:964.4994 cm⁻¹, ν₅: 1050.5104 cm⁻¹, ν₄: 1093.8632 cm⁻¹) and a complete set of first-order Coriolis coupling constants. The most important couplings occur between ν₉ and ν₆ (ξ_a= 1.069 cm⁻¹, ξ_c= −0.3535 cm⁻¹) and between ν₅ and ν₄ (ξ_b= −0.80606 cm⁻¹). The analysis was guided by and compared with results from our ab initio calculations for Coriolis constants and transition moments using CADPAC at TZP/MP2 level.     

The ν3 infrared spectrum of the He---NH4 complex

The mid-infrared spectrum of the ionic complex He---NH₄⁺ has been recorded in the vicinity of the triply degenerate ν₃ (t₂) vibration of the free ammonium ion. Apart from a small blue shift (≈ 0.7 cm⁻¹), the spectrum of the complex closely resembles that of the monomer. Ab initio calculations predict a vertex-bound minimum structure with an intermolecular well depth D_e ≈ 150 cm⁻¹, a center-of-mass separation of R_e ≈ 3.17 Å and barriers for internal rotation less than 30 cm⁻¹.