偶氮苯和氧化偶氮苯液晶基元侧链聚硅氧烷液晶的合成和性能研究

利用侧链带酰氯基的聚硅氧烷与取代偶氮苯酚进行大分子反应,合成了6种以偶氮苯氧羰基为侧链的聚硅氧烷Ⅲ_a-f;将其中的Ⅲ_a-c进行氧化,得到3种以氧化偶氮苯氧羰基为侧链的聚硅氧烷Ⅳ_a-c聚合物结构通过核磁共振、红外光谱和元素分析表征,利用偏光显微镜和差热分析仪研究了聚合物的相行为.讨论了苯环上取代基和液晶基元的中心桥键对聚合物液晶性能的影响.     

1,8-辛二酸改性热致液晶共聚酯的制备及其性能

以对羟基苯甲酸、对苯二甲酸和对苯二酚为共聚单体，经乙酰化和熔融缩聚两步法合成三元热致液晶共聚酯。引入长链脂肪族化合物1,8-辛二酸作为改性单体，按不同比例代替对苯二甲酸，制备了一系列含柔性链段的新型四元热致液晶共聚酯。通过傅里叶红外光谱(FT-IR)和核磁共振碳谱(¹³C-NMR)对共聚酯结构进行表征，采用差示扫描量热(DSC)和热失重分析(TGA)表征其热性能，采用偏光显微镜(POM)和X射线衍射(XRD)分析其液晶性能。研究表明，三元液晶共聚酯熔点达407℃，热稳定性优异。随着1,8-辛二酸含量增加，四元共聚酯熔点显著降至214℃，热稳定性较好，最大热分解温度达到428℃。该系列共聚酯显示了典型的向列型液晶织态结构。1,8-辛二酸的引入显著改善了液晶共聚酯的可加工性。     

功能高分子学报第十五卷总目次2002年

第一期研究论文侧链液晶离聚物对ＰＡ10 10 /ＰＰ共混体系的增容作用 李远明 ,　张宝砚 ,　王　俊　 ( 1)……………………………………………直接甲醇燃料电池用阻醇质子导电聚乙烯醇 -聚苯乙烯磺酸共混膜 吴　洪 ,　王宇新 ,　王世昌　 ( 6)…………………………有机硅参与的聚电解质的合成及性能研究 张立伟 ,　李　峰 ,　夏海平 ,　周勇亮 ,　林华水　 ( 11)…………………………………具有苯烷基侧链的芳香液晶聚酯的合成及性质 郭大建 ,　ＡｌｆｒｅｄＨｅｒｍａｎ　 ( 15)………………………………………………………干苔多糖的分离…     

含磷全芳族热致液晶共聚酯的合成及热性能

全芳族热致液晶聚酯因其优良的力学性能、热稳定性及较低的熔融粘度而倍受关注 ,是当今最有前途的特种高分子材料之一 .但是 ,全芳族聚酯的刚性结构使其熔点较高 ,难以加工 ,因而通过分子设计制备熔点较低的热致全芳香族聚酯液晶成为研究的热点 .在主链型热致液晶高分子的分子设计中 ,通常采用共聚或在高分子链中引入取代基、柔性链段、扭结成分等方法来达到降低聚合物相转变温度的目的[1～ 6 ] .本文以对羟基苯甲酸、对苯二甲酸、间苯二甲酸和含磷二元酚化合物为单体 ,合成了一类具有较低熔点或流动温度的新型全芳族热致共聚酯液晶 ,其分子…     

烷基化程度对N-十八烷基化聚乙烯亚胺梳状高分子结构的影响

利用烷基化方法制备了烷基化取代程度(DS)介于47%～17.6%的N-十八烷基聚乙烯亚胺(PEI18C)梳状高分子.通过红外光谱、差示扫描量热法(DSC)、X-射线衍射和热失重分析等方法研究了PEI18C梳状高分子的结构、结晶行为和热稳定性,探讨了侧链烷基DS对C18侧链结晶及临界结晶行为的影响.结果发现,随DS的降低,PEI18C梳状高分子的结晶度由54.0%降至20.3%,可结晶碳原子数目由11.4个降到4.3个.受限于PEI骨架上C18烷基侧链的堆积排列模式并没有发生根本变化,仍以六方晶胞的形式进行排列.结果表明,侧链烷基DS或沿主链的侧链烷基分布密度对梳状高分子的结晶行为和临界结晶能力有明显的影响.从侧链结晶的角度,分析了侧链烷基取代度对梳状高分子结晶及热稳定性的影响.     

卤原子取代苯并噻二唑聚合物给体材料的合成及其光伏性能研究

通过对苯并噻二唑单元进行氟、氯等卤原子取代,并同时调节烷基侧链的长度,设计合成了一系列基于苯并噻二唑四噻吩类的聚合物太阳电池材料.不同卤原子取代以及烷基侧链的长度都会影响聚合物的结晶性和薄膜聚集形貌从而改变其带隙和电荷传输性质.氟、氯原子的引入可调节聚合物的能级结构,而且相对于氟原子而言,具有更大原子半径的氯原子的引入可在更大尺度下调节能级结构,从而大幅提高相应太阳电池的开路电压,同时通过侧链的优化可进一步调节聚合物的微观聚集结构,改善器件能量转换效率.结果表明,在氯原子和氟原子共同作用的情况下,引入较长的侧链有利于提升聚合物的开路电压和短路电流,从而获得较好的器件性能.其中,以氯、氟共同取代的聚合物PCFBT4T-2OD与PC_(71)BM为活性层的器件性能最佳,能量转换效率可达8.84%.     

单取代侧链液晶聚炔的相结构

侧链液晶聚炔由于具有潜在的导电性能和液晶性能而得到越来越多的关注。本文综述了单取代侧链液晶聚炔主链的立体构型与构象及形成的柱状相结构、近晶相、溶致液晶相及外场中形成的相结构。旨在介绍主链构象、间隔基长度、液晶基元的结构和尾链长度等因素对其相结构的影响。     

含X-型和棒型两种液晶基元的主链型共聚酯

采用高温溶液缩聚方法,合成了一系列不同配比的含X-型和棒型两种液晶基元的主链型芳族共聚酯。经检测,所有样品均具有热致液晶性。本文对这类共聚酯的液晶行为进行了研究。     

聚芳酯聚碳酸酯液晶共聚物的合成及表征

采用聚合物改性合成方法，以聚碳酸酯和对羟基苯甲酸苯酯（ＰＰＨＢ）为原料，克服了聚碳酸酯高温下易酸解脱羧的现象，合成了链结构为（ＯｐｈＣＯ）ｘ［ＯＰｈＣ（ＣＨ３）２ＰｈＯＣＯ］ｙ的液晶聚酯碳酸酯，并借助于ＤＳＣ，１Ｈ—ＮＭＲ，ＦＴＩＲ，ＴＧＡ，热台偏光显微镜和Ｘ光衍射等手段表征了其性能．结果表明，所合成的液晶聚酯碳酸酯具有较高的对数比浓粘度；当（ＯＰｈＣＯ）结构单元含量大于或等于５５ｍｏｌ％时，聚合物能呈现出向列型液晶行为；聚合物的Ｔｇ随着（ＯＰｈＣＯ）单元的增加而变大，并且聚合物拥有较好的溶解性能和热稳定性能     

具有氟烷基边链和手性中心液晶化合物的合成及液晶性研究

本文设计合成了十个含氟烷基边链和手性中心的液晶化合物，并通过DSC和偏光显微镜对它们的液晶性进行了研究。其中二环系液晶化合物不显示液晶相或仅显示单边近晶A相。三环系液晶化合物中较长的氟烷基边链有利于近晶相的形成，且当液晶核另一端的烷氧基链的长度适中时，在氟烷基边链和液晶核之间具有手性中心的液晶分子显示了手性近晶C相和其它液晶相。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.