Visible-light-responsive photocatalytic reaction on tetrahedrally-coordinated chromium oxide moieties loaded on ZSM-5 zeolites and HMS mesoporous silica: partial oxidation of propane

Chromium oxide (Cr-oxide) moieties loaded on ZSM-5 zeolites and HMS mesoporous silica molecular sieves were prepared by an impregnation method and characterized by various spectroscopic methods (XRD, XAFS, UV-Vis, photoluminescence) and their photocatalytic reactivities for partial oxidation of propane under visible light irradiation were investigated. The local structure of Cr-oxide species depended to a large extent on the zeolite types and Si/A1 ratios of zeolites. Tetrahedrally-coordinated isolated Cr-oxide moieties can be loaded on HMS and ZSM-5 having the higher Si/A1 ratios. On these catalysts, in the presence of propane and O₂, a partial oxidation proceeded under visible light irradiation to produce acetone with high selectivity. The charge-transfer excited state of the tetrahedral Cr-oxide moieties plays a significant role in the selective photocatalytic reactions under visible light irradiation.     

Development of new photocatalytic water splitting into H2 and O2 using two different semiconductor photocatalysts and a shuttle redox mediator IO3-/I-

A new type of photocatalytic reaction that splits water into H2 and O2 was designed using a two-step photoexcitation system composed of an iodate/iodide (IO3-/I-) shuttle redox mediator and two different photocatalysts, one for H2 evolution and the other for O2 evolution. Photocatalytic oxidation of water to O2 and reduction of IO3- to I- selectively proceeded with good efficiencies over TiO2-rutile and Pt-WO3 photocatalysts under UV and visible light irradiations, respectively. The O2 evolution selectively proceeded even in the presence of a considerable amount of I- in the solutions, although the oxidation of water is thermodynamically less favorable than oxidation of I-. Both the adsorption property of IO3- anions and the oxidation property of the photocatalysts are doubtless responsible for the selective oxidation of water. On the other hand, photocatalytic reduction of water to H2 and oxidation of I- to IO3- proceeded over Pt-TiO2-anatase and Pt-SrTiO3:Cr/Ta (codoped with Cr and Ta) photocatalysts under UV and visible light, respectively. The combination of two different photocatalysts results in a stoichiometric evolution of H2 and O2 via the redox cycle of IO3- and I-. The photocatalytic water splitting under visible light irradiation (lambda > 420 nm) was demonstrated by using the Pt-SrTiO3:Cr/Ta, Pt-WO3, and IO3-/I- shuttle redox mediator.     

Mechanistic studies of the photocatalytic oxidation of trichloroethylene with visible-light-driven N-doped TiO2 photocatalysts

Visible-light-driven TiO2 photocatalysts doped with nitrogen have been prepared as powders and thin films in a cylindrical tubular furnace under a stream of ammonia gas. The photocatalysts thus obtained were found to have a band-gap energy of 2.95 eV. Electron spin resonance (ESR) under irradiation with visible light (lambda > or = 430 nm) afforded the increase in intensity in the visible-light region. The concentration of trapped holes was about fourfold higher than that of trapped electrons. Nitrogen-doped TiO2 has been used to investigate mechanistically the photocatalytic oxidation of trichloroethylene (TCE) under irradiation with visible light (lambda > or = 420 nm). Cl and O radicals, which contribute significantly to the generation of dichloroacetyl chloride (DCAC) in the photocatalytic oxidation of TCE under UV irradiation, were found to be deactivated under irradiation with visible light. As the main by-product, only phosgene was detected in the photocatalytic oxidation of TCE under irradiation with visible light. Thus, the reaction mechanism of TCE photooxidation under irradiation with visible light clearly differs markedly from that under UV irradiation. Based on the results of the present study, we propose a new reaction mechanism and adsorbed species for the photocatalytic oxidation of TCE under irradiation with visible light. The energy band for TiO2 by doping with nitrogen may involve an isolated band above the valence band.     

Control of Spatially Homogeneous Distribution of Heteroatoms to Produce Red TiO2 Photocatalyst for Visible-Light Photocatalytic Water Splitting

The strong band-to-band absorption of photocatalysts spanning the whole visible-light region (400–700 nm) is critically important for solar-driven photocatalysis. Although it has been actively and widely used as a photocatalyst for various reactions in the past four decades, TiO₂ has a very poor ability to capture the whole spectrum of visible light. In this work, by controlling the spatially homogeneous distribution of boron and nitrogen heteroatoms in anatase TiO₂ microspheres with a predominance of high-energy {001} facets, a strong visible-light absorption spectrum with a sharp edge beyond 680 nm has been achieved. The red TiO₂ obtained with homogeneous doping of boron and nitrogen shows no increase in defects like Ti³⁺ that are commonly observed in doped TiO₂. More importantly, it has the ability to induce photocatalytic water oxidation to produce oxygen under the irradiation of visible light beyond 550 nm and also the photocatalytic reduction of water to produce hydrogen under visible light. These results demonstrate the great promise of using red TiO₂ for visible-light photocatalytic water splitting and also reveal an attractive strategy for realizing the wide-spectrum visible-light absorption of wide-band-gap oxide photocatalysts.     

Dual-functional photocatalysis boosted by electrostatic assembly of porphyrinic metal-organic framework heterojunction composites with CdS quantum dots

Photocatalytic dual-functional reaction under visible light irradiation represents a sustainable development strategy. In detail, H₂ production coupled with benzylamine oxidation can remarkably lower the cost by replacing sacrificial agents. In this work, Cd S quantum dots(Cd S QDs) were successfully loaded onto the surface of a porphyrinic metal-organic framework(Pd-PCN-222) by the electrostatic selfassembly at room temperature. The consequent Pd-PCN-222/CdS heterojunction composites...     

Solar Light Driven H2O2 Production and Selective Oxidations Using a Covalent Organic Framework Photocatalyst Prepared by a Multicomponent Reaction

A chemically stable 2D microporous COF ( PMCR-1 ) was synthesized via the multicomponent Povarov reaction. PMCR-1 exhibits a remarkable and long-term stable photocatalytic H₂O₂ production rate (60 h) from pure and sea water under visible light. The H₂O₂ production is markedly enhanced when benzyl alcohol (BA) is added as reductant, which is also due to a strong π–π interaction of BA with dangling phenyl moieties in the COF pores introduced by the multicomponent Povarov reaction. Motivated by the concomitant BA oxidation to benzaldehyde during H₂O₂ formation, the photocatalytic oxidation of various organic substrates such as benzyl amine and methyl sulfide derivatives was investigated. It is shown that the well-defined micropores of PMCR-1 enable size-selective photocatalytic oxidation.     

Modification of the Optical and Electronic Properties of TiO<Subscript>2</Subscript> By N Anion-Doping for Augmentation of the Visible Light Assisted Photocatalytic Performance

In this work, a nitrogen-doped anatase TiO₂ nanocrystal is prepared by a modified sol-gel preparation method using the nonionic surfactant (polyoxyethylene sorbitan monooleate) as a structural controller and a soft template. The as-prepared samples are characterized by X-ray diffraction, Raman spectroscopy, UVVis diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy techniques. Then the photocatalytic activity of these samples is assessed by the photocatalytic oxidation of phenol under visible light irradiation. The phenol concentration is measured using a UV-Vis spectrometer. Experimental results show that N-doping leads to an excellent visible light photocatalytic activity of the TiO₂ nanocatalyst. Furthermore, the formation energy and electronic structure of pure and N-doped anatase TiO₂ are described by density functional theory (DFT) calculations. It is found that N-doping narrowed the band gap of bare TiO₂, which leads to an excellent visible light photocatalytic activity of N–TiO₂ nanocatalysts. Therefore, the prepared N–TiO₂ photocatalyst is expected to find the use in organic pollutant degradation under solar light illumination.     

Photocatalytic function of a polymer-supported B12 complex with a ruthenium trisbipyridine photosensitizer

The hybrid polymer was synthesized by a radical polymerization of a B(12) derivative and a Ru complex having styrene moieties in each peripheral position, and the hybrid polymer showed photocatalytic activity for molecular transformation with visible light irradiation.     

Nano‐WO3‐SO3H as a New Photocatalyst Insight Through Covalently Grafted Brønsted Acid: Highly Efficient Selective Oxidation of Benzyl Alcohols to Aldehydes

Modification of nano‐WO₃ with ?SO₃H groups as a covalently grafted solid acid reduced its band‐gap energy from 2.8 to 2.4 eV and made it an ideal nominee for photocatalytic reaction under visible light irradiation. This nano‐photocatalyst has been successfully used for the selective oxidation of different benzyl alcohols to corresponding aldehydes under blue LED irradiation. The reaction became approximately two times faster with excellent yields. It has shown that the nitrobenzene as an available industrial oxidant is applicable for photocatalytic oxidation of benzyl alcohol; remarkably high yield and selectivity have been observed.     

Cyclohexane photooxidation under visible light irradiation by WO3–TiO2 mixed catalysts

Research on Chemical Intermediates - Cyclohexane photocatalytic oxidation was performed over WO3 photocatalysts under visible light irradiation with molecular oxygen. Cyclohexanone and cyclohexanol...     

Photocatalytic Oxidation Based on Modified Titanium Dioxide with Reduced Graphene Oxide and CdSe/CdS as Nanohybrid Materials

Photocatalytic activity of TiO₂ nanoparticles in the visible light region was enhanced. TiO₂–CdSe and TiO₂–CdSe/CdS nanohybrids were supported on the reduced graphene oxide. These nanohybrid materials were applied as photocatalyst toward oxidation of aromatic alcohols under a mild condition and the molecular oxygen as oxidant. A plausible mechanism for the photocatalytic oxidation was also proposed. Desired nanohybrids were obtained via in situ fixation of CdSe/CdS on the surface of nanosheets of reduced graphene oxide (rGO). Finally, it was modified by TiO₂ sol nanoparticles through a hydrothermal method. The obtained nanomaterials, were characterized by SEM, TEM imaging, XRD, EDAX, DRS and XPS analyses. The size of nanohybrids materials were distributed mostly in a narrow range of 50–65 and 60–75 nm for TiO₂–rGO–CdSe and TiO₂–rGO–CdSe/CdS, respectively. These photocatalysts showed high catalytic activity under visible light irradiation in a short reaction time and even higher selectivity rather than UV irradiation. The yield of catalytic oxidation increased at least 25–30% for TiO₂–CdSe/CdS on rGO, which could be related to its higher light sensitivity and lower energy band gap. The photocatalysts were recycled and reused 8 times without significant loss of their activities due to their stability under visible light.     

钯氮共掺杂TiO2的制备与表征及其可见光催化活性

在空气气氛和N₂中热处理表面均匀分散有尿素和氯化钯的纳米管钛酸,制备了两个系列Pd/N共掺杂的TiO₂光催化剂,并对所得样品进行了X射线衍射、透射电镜、X射线光电子能谱、紫外-可见漫反射光谱、荧光光谱和电子自旋共振等表征.结果表明,焙烧气氛对样品的形貌、晶体结构、光谱吸收、生成的氧空位浓度和可见光光催化性能的影响很大,其中在空气气氛中制备的样品光催化性能优于在N₂中制备的样品.在可见光(λ≥420nm)照射下,以丙烯为模型污染物考察了样品的光催化活性,发现在空气中400℃下焙烧的样品具有最佳的可见光催化活性.另外,讨论了Pd/N共掺杂TiO₂光催化剂具有可见光响应的机理,认为掺杂的Pd/N元素和制备过程中生成的氧空位是影响可见光催化性能的重要因素.     

Modification of Wide‐Band‐Gap Oxide Semiconductors with Cobalt Hydroxide Nanoclusters for Visible‐Light Water Oxidation

Cobalt‐based compounds, such as cobalt(II) hydroxide, are known to be good catalysts for water oxidation. Herein, we report that such cobalt species can also activate wide‐band‐gap semiconductors towards visible‐light water oxidation. Rutile TiO₂ powder, a well‐known wide‐band‐gap semiconductor, was capable of harvesting visible light with wavelengths of up to 850 nm, and thus catalyzed water oxidation to produce molecular oxygen, when decorated with cobalt(II) hydroxide nanoclusters. To the best of our knowledge, this system constitutes the first example that a particulate photocatalytic material that is capable of water oxidation upon excitation by visible light can also operate at such long wavelengths, even when it is based on earth‐abundant elements only.     

Ag@AgCl修饰的锐钛矿相TiO2纳米管的制备及其光催化性能

首先采用水热合成法和双氧水处理制备了具有锐钛矿相的TiO2纳米管,然后通过沉淀和光化学反应将Ag@AgCl纳米粒子负载于其上,从而制得TiO2纳米管负载的表面等离子体光催化剂.结果表明,经Ag@AgCl纳米粒子修饰后,锐钛矿相TiO2纳米管因表面等离子共振效应而对可见光具有明显的响应,光生电子-空穴对更容易分离,因而T...     

多孔超薄g-C3N4纳米片负载Pt复合材料的制备及其光催化性能

以三聚氰胺为前驱体,通过热氧化刻蚀法制备多孔超薄g-C₃N₄纳米片（CNHS）,将其与氯铂酸钾溶液混合后采用原位光化学还原法成功制备了CNHS负载Pt光催化剂（Pt-CNHS）。使用粉末X射线衍射、场发射扫描电子显微镜、X射线光电子能谱、透射电子显微镜、紫外可见漫反射光谱和N₂吸附-脱附测试等技术对所制备样品的结构、形貌、光吸收特性、光电化学性能和比表面积等进行系统分析。并以气相甲苯为目标降解物,研究其光催化性能。结果表明,相对于体相g-C₃N₄（CNB）和CNHS,Pt的引入可以有效增强催化剂对可见光的吸收能力、响应范围及载流子分离效率。与纯g-C₃N₄和CNHS相比,Pt-CNHS在紫外和可见光照射下均表现出更高的光催化降解气相甲苯的活性。此外,也对Pt-CNHS光催化剂在可见光照射下降解气相甲苯的反应历程做了初步研究。     

Correlation of the Catalytic Activity for Oxidation Taking Place on Various TiO2 Surfaces with Surface OH Groups and Surface Oxygen Vacancies

Three catalytic oxidation reactions have been studied: The ultraviolet (UV) light induced photocatalytic decomposition of the synthetic dye sulforhodamine B (SRB) in the presence of TiO₂ nanostructures in water, together with two reactions employing Au/TiO₂ nanostructure catalysts, namely, CO oxidation in air and the decomposition of formaldehyde under visible light irradiation. Four kinds of TiO₂ nanotubes and nanorods with different phases and compositions were prepared for this study, and gold nanoparticle (Au‐NP) catalysts were supported on some of these TiO₂ nanostructures (to form Au/TiO₂ catalysts). FTIR emission spectroscopy (IES) measurements provided evidence that the order of the surface OH regeneration ability of the four types of TiO₂ nanostructures studied gave the same trend as the catalytic activities of the TiO₂ nanostructures or their respective Au/TiO₂ catalysts for the three oxidation reactions. Both IES and X‐ray photoelectron spectroscopy (XPS) proved that anatase TiO₂ had the strongest OH regeneration ability among the four types of TiO₂ phases or compositions. Based on these results, a model for the surface OH group generation, absorption, and activation of molecular oxygen has been proposed: The oxygen vacancies at the bridging O^2? sites on TiO₂ surfaces dissociatively absorb water molecules to form OH groups that facilitate adsorption and activation of O₂ molecules in nearby oxygen vacancies by lowering the absorption energy of molecular O₂. A new mechanism for the photocatalytic formaldehyde decomposition with the Au/TiO₂ catalysts is also proposed, based on the photocatalytic activity of the Au‐NPs under visible light. The Au‐NPs absorb the light owing to the surface plasmon resonance effect and mediate the electron transfers that the reaction needs.     

Preparation and characterization of ZnTiO<Subscript>3</Subscript>–TiO<Subscript>2</Subscript>/pillared montmorillonite composite catalyst for enhanced photocatalytic activity

ZnTiO₃–TiO₂/organic pillared montmorillonite (pMt) composite catalyst was successfully prepared in this paper by immobilizing ZnTiO₃–TiO₂ onto pMt. The composition and texture of the prepared composite catalyst were characterized by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, energy dispersive spectrometry, ultraviolet–visible light (UV–Vis) diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy. The photocatalytic activity was tested via photocatalytic degradation of methyl blue (MB) under both visible irradiation and UV light. The results indicated that the ZnTiO₃–TiO₂/pMt composite catalyst had an apparent absorption at the area of visible irradiation, and exhibited a higher efficiency of photocatalytic degredation of MB under visible irradiation. This was due to the heterostructure of ZnTiO₃–TiO₂, and the mesoporous structure and specific surface area of the ZnTiO₃–TiO₂/pMt composite. In addition, the results of the radical scavenging experiments showed that the holes and superoxide radicals are responsible for the degradation of MB under visible irradiation.     

Vertically oriented TiO(x)N(y) nanopillar arrays with embedded Ag nanoparticles for visible-light photocatalysis

We present a straightforward method to produce highly crystalline, vertically oriented TiO(x)N(y) nanopillars (up to 1 μm in length) with a band gap in the visible-light region. This process starts with reactive dc sputtering to produce a TiN porous film, followed by a simple oxidation process at elevated temperatures in oxygen or air. By controlling the oxidation conditions, the band gap of the prepared TiO(x)N(y) can be tuned to different wavelength within the range of visible light. Furthermore, in order to inhibit carrier recombination to enhance the photocatalytic activity, Ag nanoparticles have been embedded into the nanogaps between the TiO(x)N(y) pillars by photoinduced reduction of Ag(+) (aq) irradiated with visible light. Transmission electron microscopy reveals that the Ag nanoparticles with a diameter of about 10 nm are uniformly dispersed along the pillars. The prepared TiO(x)N(y) nanopillar matrix and Ag:TiO(x)N(y) network show strong photocatalytic activity under visible-light irradiation, evaluated via degradation of Rhodamine B.     

Zeolite‐Supported Gold Nanoparticles for Selective Photooxidation of Aromatic Alcohols under Visible‐Light Irradiation

With new photocatalysts of gold nanoparticles supported on zeolite supports (Au/zeolite), oxidation of benzyl alcohol and its derivatives into the corresponding aldehydes can proceed well with a high selectivity (99 %) under visible‐light irradiation at ambient temperature. Au/zeolite photocatalysts were characterised by UV/Vis, X‐ray photoelectron spectroscopy (XPS), TEM, XRD, energy‐dispersive spectroscopy (EDS), Brauner–Emmet–Teller (BET) analyses, IR and Raman techniques. The surface plasmon resonance (SPR) effect of gold nanoparticles, the adsorption capability of zeolite supports and the molecular polarities of aromatic alcohols were demonstrated to have an essential correlation with the photocatalytic performances. In addition, the effects of light intensity, wavelength range and the role of molecular oxygen were investigated in detail. The kinetic study indicated that the visible‐light irradiation required much less apparent activation energy for photooxidation compared with thermal reaction. Based on the characterisation data and the photocatalytic performances, we proposed a possible photooxidation mechanism.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe₂BiTaO₇,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究.结果表明Fe₂BiTaO₇为立方晶系烧绿石结构,空间群为Fd₃m,禁带宽度为1.72eV.通过比较Fe₂BiTaO₇、P₂₅TiO₂、掺氮TiO₂和Bi₂InTaO₇的可见光光催化降解罗丹明B,发现Fe₂BiTaO₇降解效果及催化活性均高于其它催化剂,并且Fe₂BiTaO₇降解罗丹明B效率是掺氮二氧化钛的1.5倍.Fe₂BiTaO₇降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.02293 min^-1.研究了罗丹明B可能的降解路径和Fe₂BiTaO₇在可见光下降解苯酚的效果.Fe₂BiTaO₇(可见光)光催化剂系统适用于纺织工业废水处理.