LC and SPE Determination of Chlorophacinone in Corn Grains, Soil and Rat Plasma

A liquid chromatographic method was used for the analysis of chlorophacinone in corn, soil and rat plasma. Sample preparation differed from corn, soil and serum. Simple liquid extraction procedures were applied to soil and corn; solid phase extraction using Oasis HLB cartridges and easy protocol was used for plasma. Liquid chromatography was on X-terra C18 column. The mobile phase used did not contain ion-pairing reagent, it was constituted with methanol/ammonium bicarbonate (0.01 M, pH = 7), 70/30, v/v at 1 mL min⁻¹. UV detection was by using photodiode detector operating at 282 nm. Complete validation of the proposed procedure for corn, soil and serum was made.     

Adsorption of Sr by immobilized microorganisms

Wastewaters from numerous industrial and laboratory operations can contain toxic or undesirable components such as metal ions, which must be removed before discharge to surface waters. Adsorption processes that have high removal efficiencies are attractive methods for removing such contaminants. For economic operations, it is desirable to have an adsorbent that is selective for the metal contaminant of interest, has high capacity for the contaminant, has rapid adsorption kinetics, can be economically produced, and can be regenerated to a concentrated waste product or decomposed to a low-volume waste. Selected microorganisms are potentially useful adsorbents for these applications because they can be inexpensive, have high selectivities, and have high capacities for adsorption of many heavy metals, which are often problems in a variety of industries.     

Direct Determination of Arsenic in Natural Gasoline and Gas Condensate by Graphite Furnace Atomic Absorption Spectrometry Using an in situ Absorption Technique

Because arsenic poison catalysts during process operations and also is an environmental contaminant, the determination of total arsenic in natural gasoline, gas condensate and its products is of primary concern. Many methods available for the determination of arsenic require sample pretreatment and subsequent analysis on an aqueous matrix. Unfortunately, those methods could not get a satisfactory result because natural gasoline, gas condensate and its products may contain a variety of organic arsenic compounds which have lower boiling point than inorganic arsenic.     

A wavelength-dispersive arrangement for wafer analysis with total reflection X-ray fluorescence spectrometry using synchrotron radiation

Currently, the only apparent means to enhance the detection power of the TXRF technique would be to increase the intensity of the primary beam. Using synchrotron radiation, the most powerful X-ray source available, unfortunately, not only the fluorescence signal of the contaminant elements is increased, but also in equal measure, the intensities of the Si–K radiation from the wafer together with the scattered radiation. This results in an overloading of the energy-dispersive Si (Li) detector systems used hitherto, with the effect that the available primary intensity cannot be fully exploited. Wavelength-dispersive systems are free of such problems; they generate less detector background and can withstand higher count rates. Due to their small angle of acceptance, however, their detection efficiency is quite low. In this contribution we propose a wavelength-dispersive TXRF solution, which is optimized with regard to higher efficiency on the basis of large area multilayer mirrors in combination with a position-sensitive detector. The count rates in relation to energy-dispersive instruments and the energy resolution of the new system have been calculated using ray-tracing techniques.     

A Uricase Method for the Peak Identification of Uric Acid Appeared in a Liquid Chromatogram Amperometrically Monitored

Abstract

A uricase method for the peak identification of uric acid appeared in a liquid chromatogram monitored by aid of an electrochemical detector has been developed. Uricase (EC 1.7.3.3, from Candida utilis) catalyzes the conversion of uric acid to allantoin. We have found that uric acid can be oxidized under the chromatographic conditions employed in this study, whereas allantoin cannot be oxidized. The complete disappearance of a uric acid peak in a chromatogram of a biological sample after the uricase treatment indicates that the uric acid peak does not contain any other electroactive components. We observed the complete disappearance of the uric acid peaks in the chromatograms of human serum and gastric body.     

A novel method for the calibration of Kováts retention indices using n-alkanes with a thermionic nitrogen-phosphorus specific detector

This paper describes a novel method for the detection of compounds that do not contain nitrogen or phosphorus by a thermionic nitrogen-phosphorus specific detector (NPD), which normally detects only nitrogen- or phosphorus-containing compounds. This method allows for the calibration of gas chromatographic columns with NPD detectors using n-alkanes instead of nitrogen-containing drug mixtures. This results in a more rapid and accurate calibration for the calculation of relative retention indices (RRI), such as Kováts indices, than was previously possible when employing an NPD detector. The proposed method describes the temporary conversion of the NPD detector into a detector with properties much like a flame ionization detector. After a deliberate increase in the hydrogen gas flow rate to the thermionic bead from 4 ml/min to 8 ml/min, the n-alkanes (containing no nitrogen) can be detected and used as RRI calibrators. Once the column has been calibrated, the hydrogen gas flow rate is lowered to the normal rate of 4 ml/min. The detector then behaves as a normal NPD, no longer detecting the n-alkanes.     

Laser-induced fluorescence detector for liquid chromatography: applications to protein analysis

A laser-induced fluorescence detector for liquid chromatography was developed. This detector was assessed by utilizing it in conjunction with gel filtration chromatography. Using the 488 nm line of an argon ion laser for excitation and monitoring the emitted fluorescence centering at 535 nm, the limit of detection of fluorescein was 580 fM. Bovine serum albumin labeled with fluorescein was detected at a concentration of 500 fM.     

A flow detector based on square-wave polarography at the dropping mercury electrode

Square-wave polarography (s.w.p.) at the DME has been adapted for detection in various analytical flow systems. The combination of high sensitivity with rapid potential scan rates results in detector characteristics significantly superior to those previously reported for techniques involving constant applied potential. In an automated flow system for the analysis of discrete samples, s.w.p. allows sensitive and reproducible multi-component sample analysis, at a sampling rate of 22.5 samples per hour (at a 1:1 sample/wash ratio and with relatively low sample volumes). The electrochemical selectivity of the detector may be exploited for monitoring Chromatographic column effluents, in cases where the chromatographic separation is incomplete: species eluted simultaneously but having different reduction potentials can be determined with satisfactory sensitivity. The in-situ monitoring system based on s.w.p. allows rapid simultaneous determinations (~ 300 per hour) of a number of contaminants present at the sub-ppm level; because of its long-term stability and reproducibility, it seems well suited for continuous contaminant control.     

Pulsed discharge helium ionization detector

Summary A pulsed discharge helium ionization detector (PDHID) (patent pending) for gas chromatography has been developed. This detector uses a non-radioactive pulsed high voltage discharge source for generation of electrons and pulsed collection of these electrons. We have evaluated this detector for the analysis of a wide range of chemical compounds. In this paper the analytes are passed through the discharge since the permanent gases are difficult to ionize. The initial results for the permanent gases indicate that the PDHID can be used as a universal detector of contaminant traces at detection levels on the order of 1–20 pg. The response in this mode of operation is linear over four orders of magnitude.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

3-MCPD in food other than soy sauce or hydrolysed vegetable protein (HVP)

This review gives an overview of current knowledge about 3-monochloropropane-1,2-diol (3-MCPD) formation and detection. Although 3-MCPD is often mentioned with regard to soy sauce and acid-hydrolysed vegetable protein (HVP), and much research has been done in that area, the emphasis here is placed on other foods. This contaminant can be found in a great variety of foodstuffs and is difficult to avoid in our daily nutrition. Despite its low concentration in most foods, its carcinogenic properties are of general concern. Its formation is a multivariate problem influenced by factors such as heat, moisture and sugar/lipid content, depending on the type of food and respective processing employed. Understanding the formation of this contaminant in food is fundamental to not only preventing or reducing it, but also developing efficient analytical methods of detecting it. Considering the differences between 3-MCPD-containing foods, and the need to test for the contaminant at different levels of food processing, one would expect a variety of analytical approaches. In this review, an attempt is made to provide an up-to-date list of available analytical methods and to highlight the differences among these techniques. Finally, the emergence of 3-MCPD esters and analytical techniques for them are also discussed here, although they are not the main focus of this review.     

Monomer relative affinity in a copolymer

This paper analyzes data from experiments on simple polymer chains. It measures the extent to which a particular monomer prefers to link with another of the same type. To analyze the data, it derives the likelihood function for a two‐state Markov model in which only the number in each state, but not the order, is observed. This technology is applied to a data set on which experimenters mixed lactic‐glycolic monomers with a known proportion of a contaminant consisting of an extra lactic acid. The resulting copolymers were subjected to matrix‐assisted laser desorption ionization mass spectrometry. This records the number of copolymers at each atomic weight, which can be associated with a given length of copolymer and number of contaminant monomers. Analysis of the data shows that the proportion of contaminant monomers exceeded the proportion of experimentally induced contaminant. Maximum likelihood estimates using the data show that lactic‐glycolic monomers show a positive affinity for the contaminant. Copyright © 2015 John Wiley & Sons, Ltd.     

System zones in capillary zone electrophoresis.

This paper brings an overview of system zones (SZs) in capillary zone electrophoresis (CZE) and their effects upon the migration of zones of analytes. It is shown that the formation and migration of SZs is an inherent feature of CZE, and that it depends predominantly on the composition of an actual background electrolyte (BGE). One can distinguish between stationary SZs and migrating SZs. Stationary SZs, which move due to the electroosmotic flow only, are induced in any BGE by sample injection. Migrating SZs may be induced by a sample injection in BGEs which show at least one of the following features: (i) BGE contains two or more co-ions, (ii) BGE has low or high pH whereby H+ or OH- act as the second co-ion, and (iii) BGE contains multivalent weak acids or bases. SZs do not contain any analyte and show always BGE-like composition. They contain components of the BGE only and the concentrations of these components are different from their values in the original BGE. Providing that some of the ionic components of the BGE are visible by the detector, the migrating SZs can be detected and they are present as system peaks/dips in the electropherogram. It is shown that a migrating SZ may be characterized by its mobility, and examples are given how this mobility can depend on the composition of the BGE. Further, the effects of the migrating SZs (either visible or not visible by the detector) upon the zones of analytes are presented and the typical disturbances of the peaks (extra broadening, zig-zag form, schizophrenic behavior) are exemplified and discussed. Finally, some conclusions are presented how to cope with the SZs in practice. The proposed procedure is based on the theoretical predictions and/or measurements of the mobilities of SZs and on the so-called unsafe region. Then, such operational conditions should be selected where the unsafe region is outside of the required analytical window.     

Determination of L-thyroxine in reference serum preparations as the o-phthalaldehyde-N-acetylcysteine derivative by reversed-phase liquid chromatography with electrochemical detection

A simple procedure for the assay of L-thyroxine in serum preparations with D-thyroxine as internal standard is described. The L-thyroxine is extracted with acetonitrile, fractionated on a reversed-phase silica cartridge and analysed by reversed-phase high-performance liquid chromatography of the o-phthalaldehyde-N-acetyl-L-cysteine derivative. This derivative is not fluorescent, but may be detected with suitable sensitivity and selectivity with an electrochemical detector.     

An untargeted metabolomics approach to contaminant analysis: pinpointing potential unknown compounds

This study deals with an automated data analysis strategy to pinpoint potential unknown compounds in full scan mass spectrometry (MS) experiments. Three examples of an untargeted metabolomics approach to contaminant analysis are given. By comparing a plant-oil based hormone cocktail to 90 plant oil samples ca. 25 compounds specific to the hormone cocktail could be detected. Five of these compounds were confirmed as steroid hormones. A comparison of a drink water sample from a farm to distillated water showed the presence of contaminants specific to this drink water sample. A grass sample, which was known to give a false positive result in a DR-CALUX bioassay, was unexpectedly shown to contain an abnormal level of chrysene, which was obviously not eliminated during clean-up.     

Application of Dielectric Barrier Discharge Reactor Immersed in Wastewater to the Oxidative Degradation of Organic Contaminant

Dielectric barrier discharge (DBD) is an effective method available for the production of ozone and ultraviolet light. The wastewater treatment system of this study was designed to utilize both ozone and ultraviolet light produced in the DBD reactor for the degradation of organic contaminant. The DBD reactor consisted of a quartz cylinder and a coaxial ceramic tube inside of which a steel rod was placed. The DBD reactor was immersed in the wastewater that was grounded. In this case, the wastewater acted not only as an electrode but also as the cooling medium for the DBD reactor. An azo dye, Acid Red 27, was used as the organic contaminant. In this system, the organic contaminant was degraded by two oxidation pathways induced by ozone and ultraviolet light. The concentration of ozone, the ultraviolet radiation intensity and the degradation efficiency of the organic contaminant were measured by varying the discharge. The results showed that the present system was very effective for the degradation of the organic contaminant. The energy requirement for the degradation was found to be 0.654 kJ/mg, which is much smaller value than those obtained with an ultraviolet/photocatalytic process.     

Comparison of five extraction methods for measuring PCBs,PBDEs, organochlorine pesticides,and lipid content in serum

An increasing number of studies use blood obtained noninvasively to monitor organohalogen contaminants; however, blood can be difficult to analyze because of its aqueous nature and high protein content. We compared five methods for extracting polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), organochlorine pesticides, and lipids from serum using National Institute of Standards and Technology Standard Reference Material 1589a PCBs, Pesticides, PBDEs, and Dioxins/Furans in Human Serum. Liquid:liquid (LLE), cavity-dispersed microwave-assisted (MAE), focused microwave-assisted (FME), solid-phase (SPE), and pressurized fluid (PFE) extraction techniques were compared. FME extraction yielded the optimal recovery of internal standards (IS). All methods resulted in similar contaminant concentrations that also agreed with the certified values for SRM 1589a, except for only a few compounds measured by methods other than FME. Based on these findings, the FME method was determined to be the best overall extraction method. One procedural factor was found to affect contaminant concentrations; use of IS carrier solvents that were immiscible with serum (or when the serum was not directly physically mixed with IS) resulted in a 30% underestimation of organohalogen concentrations. This study offers valid, novel extraction alternatives beyond traditional methods (e.g., LLE) for blood contaminant measurements. Figure       

Gross alpha and gross beta radioactivity in drinking water from Zacatecas and Guadalupe cities, Mexico

The conditions to measure the gross alpha and gross beta radioactivity in water samples from Zacatecas and Guadalupe cities in the State of Zacatecas, Mexico were established. The gross alpha and beta radioactivity of water samples were measured using a liquid scintillation detector. The results show that the gross beta radioactivity in all cases is lower than the maximum contaminant level and the gross alpha radioactivity is higher in the samples collected from Guadalupe City and in the samples collected from the Southwest of Zacatecas City.     

The Simultaneous Assay of Naproxen and Salicylic Acid in Serum Using High Pressure Liquid Chromatography

Abstract

A rapid, sensitive, reverse-phase high pressure liquid chromatographic assay was developed for the simultaneous determination of naproxen and salicylic acid. These compounds are extracted from serum and then separated on a reverse-phase column using an acidified methanol eluent. Utilization of a flow-through fluorescence detector in series with a variable wavelength micro-UV detector enhances the sensitivity of the assay. Application of the assay to therapeutic levels of the drugs in human serum is demonstrated.     

Continuous-flow enzymatic determination of creatinine with improved on-line removal of endogenous ammonia

A new continuous-flow automated enzymatic method suitable for the direct determination of creatinine in physiological samples is described. The proposed system utilizes an on-line gas predialysis unit in conjuction with a flow-through enzyme reactor coil and a potentiometric ammonia detector. The enzyme reactor contains immobilized creatinine iminohydrolase (EC 3.5.4.21) which converts creatinine to ammonia and N-methylhydantoin. Ammonia liberated from this reaction is detected downstream with the membrane electrode-based detector. The novel gas predialysis unit effectively removes >99.8% of endogenous ammonia (up to 1 mM) present in the sample. Thus, final peak potentials recorded by the electrode detector are directly proportional to the logarithm of creatinine concentrations present. The method is shown to be precise (<3%), selective, and capable of accurately determining creatinine in serum and urine samples containing abnormally high endogenous ammonia levels. Determinations of creatinine in serum samples (n = 30) using this new method correlate well with an existing Technicon AutoAnalyzer colorimetric method (r = 0.996).     

Determination of methylcyclopentadienylmanganesetricarbonyl by gas chromatography—atomic absorption spectrometry at ng m-3 levels in air samples

A procedure is given for the determination of methylcyclopentadienylmanganese tricarbonyl (MMT) at ng m^-3 concentrations in air. The method involves trapping of MMT in a small segment of gas chromatographic column and then determination by gas chromatography with an electrothermal atomic absorption detector. The detection limit of the procedure is 0.05 ng m^-3. Air samples from an underground car-park (when MMT was detected) were found to contain between 0.1 and 0.3 ng m^-3 MMT. MMT was not detected in any of the street air samples taken.