Characterization of etched electrochemical detection for electrophoresis in micron inner diameter capillaries

An enhanced etched electrochemical (EC) detection technique has been developed for CE in micron inner diameter capillaries. The design improvements allow for better alignment between the capillary bore and the electrode. This new method involves utilizing a carbon fiber microelectrode and etching both the carbon fiber and the detection end of a micrometer-sized inner diameter capillary to limit dead volume and analyte diffusion at the amperometric EC detector. To understand the factors affecting enhanced detector efficiency, a detailed examination of the relationship between detector design and performance has been completed by exploring the effects of varying electrode diameter, tip shape, and size, in addition to the etch length of the capillary outlet. The enhanced detection provides peak efficiencies as high as 75000 theoretical plates and estimated detection limits as low as 40 nM for dopamine. This etched detection method should further facilitate volume-limited sample analysis by CE.     

Quantitative determination of dopamine in single rat pheochromocytoma cells by microchip electrophoresis with only one high‐voltage power supply

We developed a method for the direct identification of dopamine in single cultured rat pheochromocytoma cells by capillary electrophoresis using an end‐channel carbon fiber nanoelectrode amperometric detector. The operation mode was designed to achieve single‐cell injection and lysis in microfluidic chip electrophoresis with only one high‐voltage power supply. The separation and detection conditions were optimized. Four catecholamines were baseline‐separated and determined with this system, and the cell density and liquid height of the reservoirs were accommodated for single cell loading, docking and analysis. The microchip capillary electrophoresis system was successfully applied to determine dopamine in single cultured rat pheochromocytoma cells.     

Improving resolution for channel-format chip-based electrophoresis with electrochemical array detection

Resolution in channel electrophoresis has been improved by means of the addition of a surfactant to the running buffer and minimization of the channel internal height and sampling capillary internal diameter. Micellar electrokinetic channel chromatography with electrochemical detection has been applied to the separation of several cationic catecholamines and has been used to continuously monitor a dynamic system of dopamine, norepinephrine, and epinephrine. Resolution was also enhanced by coupling small internal-diameter (5 microm) sampling capillaries with sub-micrometer internal-height separation channels. The improvements in resolution offered by these methods will extend the applicability of channel electrophoresis with electrochemical detection to more complex samples while permitting sample volumes in the nL range to be probed.     

Measurement of ascorbic acid in single human neutrophils by capillary zone electrophoresis with electrochemical detection

A method has been developed for the determination of ascorbic acid (AA) in individual human neutrophils by capillary zone electrophoresis with electrochemical detection at a carbon fiber microdisk bundle electrode. The natively easily oxidized substances such as glutathione, dopa, dopamine, serotonin, epinephrine do not interfere with the determination of ascorbic acid. A procedure of treating capillaries, which can overcome the influence of the adsorption of the substances in cells on the inner surface wall of the capillary on the migration time and the number of theoretical plates of interests, has been described. The average amount of AA in an individual neutrophil is 0.557 fmol, which is consistent with the literature value.     

Recent advances in the development of single cell analysis—A review

Development of techniques for the analysis of the content of individual cells represents an important direction in modern bioanalytical chemistry. While the analysis of chromosomes, organelles, or location of selected proteins has been traditionally the domain of microscopic techniques, the advances in miniaturized analytical systems bring new possibilities for separations and detections of molecules inside the individual cells including smaller molecules such as hormones or metabolites. It should be stressed that the field of single cell analysis is very broad, covering advanced optical, electrochemical and mass spectrometry instrumentation, sensor technology and separation techniques. The number of papers published on single cell analysis has reached several hundred in recent years. Thus a complete literature coverage is beyond the limits of a journal article. The following text provides a critical overview of some of the latest developments with the main focus on mass spectrometry, microseparation methods, electrophoresis in capillaries and microfluidic devices and respective detection techniques for performing single cell analyses.     

Optimization of Electrode Alignment for Electrochemical Detection in Capillary Electrophoresis Using a Scanning Electrochemical Microscope

Electrochemical detection in capillary electrophoresis requires decoupling the voltage applied to the working electrode from the separation voltage applied across the capillary. End‐capillary electrochemical detection achieves this by placing the electrode just outside the ground end of the separation capillary. Obtaining adequate signal‐to‐noise in this arrangement requires using small inner diameter capillaries. Decreasing the inner diameter of the separation capillary, however, increases the difficulty of aligning the microelectrode with the open end of the capillary. Using scanning electrochemical microscopy (SECM), the position of the capillary opening is determined while electroactive material is continuously emerging from the end of the capillary. The SECM instrument is then used to place the electrode at the position of maximum current for subsequent separations. Subsequent measurements found that the best signal‐to‐noise is obtained when the detection electrode is placed directly opposite the capillary opening and just outside of the capillary opening. When the electrode is further above the opening (but still opposite the capillary opening), the signal‐to‐noise does not dramatically decrease until the electrode is more than 30 μm above the 10 μm inner‐diameter capillary.     

Capillary zone electrophoresis in laboratory-made fluorinated ethylene propylene capillaries

Capillaries made of fluorinated ethylene propylene (FEP) with an inner diameter of 50 microm have been employed in capillary zone electrophoresis with UV-Vis absorbance detection. The capillaries were made in the laboratory with a recently developed technique using fluoropolymer heat shrink/melt tubing and a tungsten wire as a template for the channel. An electroosmotic flow was obtained in the channels and it is shown that an FEP capillary is more effective for a cationic test solute than a fused-silica capillary. The compatibility of FEP capillaries with optical detection is evaluated briefly.     

Post-column reactor of coaxial-gap mode for laser-induced fluorescence detection in capillary electrophoresis

A post-column reactor with coaxial-gap mode is developed for laser-induced fluorescence detection (LIF) in capillary electrophoresis (CE). The reactor can be assembled simply and conveniently, in which a thin polyimide sleeve of 10-mm length obtained from the capillary coating is used to align separation and reaction capillary with a 20 microm gap. Naphthalene-2,3-dicarboxaldehyde and 2-mercaptoethanol are used as derivatization reagents and delivered into the reaction capillary through the annulus between the separation capillary and polyimide sleeve and the gap of two capillaries by gravity. A reaction distance from the gap to detection point is 5mm. For the post-column reactor of CE-LIF, several configuration parameters are optimized, including liquid level difference between the derivatization solution and outlet buffer, annular dimension between the outer diameter of etched separation capillary and the inner diameter of polyimide sleeve, and reaction distance, etc. The detection limits in the range from 8.0x10(-8) to 1.0x10(-6) mol/L and linear calibration range more than two orders of magnitude are obtained for amino acids. The separation efficiency ranges from 1.35x10(5) to 1.67x10(5) theoretical plates.     

Carbon fiber nanoelectrodes applied to microchip electrophoresis amperometric detection of neurotransmitter dopamine in rat pheochromocytoma (PC12) cells

Microelectrodes have been adopted in electrochemical detection for CE or microchip CE in recent years. In this paper, the use of nanoelectrodes (with tip diameter of 100-300 nm) as the electrochemical detector in microchip CE is firstly reported. The experimental results indicated that both the sensitivity and resolution of microchip CE with the carbon fiber nanoelectrode (CFNE) amperometric detection have been improved markedly comparing with the traditional microelectrodes. The detection limit of dopamine (S/N = 3) is 5.9x10(-8) M, which is one or two orders of magnitude lower than that reported so far, and the resolution of dopamine (DA) and isoprenaline (IP) has also improved from 0.6 (using 7 mum carbon fiber microelectrodes, CFME) to 1.0. We assembled a novel and easily operated microchip CE system with end-column amperometric detection, which allows the convenient and fast replacement of the passivated electrodes. Under the optimized condition, the RSDs of peak height and migration time are 1.47 and 0.31%, respectively (n = 40), indicating that the system displays excellent reproducibility. The nanoelectrode-based microchip CE system has been successfully applied to the determination of DA in cultured rat pheochromocytoma (PC12) cells, and the average content of DA in an individual PC12 cell is 0.54 +/- 0.07 fmol, which is in good agreement with that reported in the literature.     

Capillary electrophoresis of single mammalian cells

Capillary electrophoresis (CE) has been established as powerful tool for single cell analysis. Newly developed sampling, separation and detection methods have allowed the investigation of single mammalian cells with CE despite their small size and complex composition. Advances in sample injection techniques include several novel methods for the injection of whole cells and sampling techniques for the study of cellular secretion. CE of single mammalian cells has been applied in a wide range of fields including protein analysis, neuroscience, and oncology. The development of new detection schemes in the analysis of single mammalian cells with CE has included studies of protein expression and the utilization of mass spectrometric and electrochemical detection. Subcellular mammalian cell analysis with CE also has been investigated.     

Analysis of Ascorbic Acid in Single Human Neutrophils by Electrochemical Detection

Ascorbic acid in individual human neutrophils was determincd by capillary zone clectrophoresis with electrochemical detection. In order to overcome the influence of the adsorption of the substances in cells on the inner surface wall of the capillary on the migration time and the unmber of theorctical plates, a proccdure for treating capillaries has bccn described.     

Application of a novel micro-injector in the determination of indole derivatives in the rat pineal gland by capillary electrophoresis with electrochemical detection

A novel micro-injector has been fabricated for capillary electrophoresis (CE). It was successfully used for the determination of some indole derivatives for example melatonin (MT), serotonin (5-HT), tryptophan (Trp), and 5-hydroxy-tryptophane (5-HTrp) in the rat pineal gland by capillary electrophoresis with electrochemical detection (CE-EC). CE was performed in 0.20 mol L(-1) phosphate buffer (pH 8.0). The compounds investigated can be well separated and detected within 15 min. The working electrode used was a 300-microm diameter carbon electrode positioned opposite the outlet of the capillary. The relationship between peak current and analyte concentration was highly linear in the range from 0.10 to 500 micromol L(-1); detection limits (S/N = 3) were 0.03-0.13 micromol L(-1). The proposed method has been successfully used to analyze real biological samples.     

Application of capillary electrophoresis to the analysis of soluble chromatin

Capillary electrophoresis (CE) has been applied to study DNA-protein complexes using as the test system soluble chromatin from chicken erythrocytes and rapidly proliferated cultured Chinese hamster fibroblast-like cells B11-dii-FAF-28. Separation was performed with home-made CE apparatus, using a regulated high-voltage power supply, UV-detector and fused silica capillaries with inner diameter 75 microm. The heterogeneity of nucleosomal particles with different DNA lengths after micrococcal nuclease digestion was detected.     

Determination of Amino Acids in Single Human Lymphocytes after On-capillary Derivatization by Capillary Zone Electrophoresis with Electrochemical Detection

Sensitive and selective methods for the detection of amino acids (AAs) in single cells are of increasing importance. Capillary zone electrophoresis (CZE) with electrochemical detection (ED) is suitable for analysis of electroactive contents in single cells. However, most native AAs have no electroactivity. Derivatization with an electroactive tag is an attractive method. An on-capillary derivatization scheme was reported1. Naphtha- lene-2, 3-dicarboxaldehyde (NDA) can react with pri…     

An interface chip connection between capillary electrophoresis and thermal lens microscope

A thermal lens microscope (TLM) detection of capillary electrophoresis (CE) utilizing microchip technology was developed. Fused-silica capillaries with an inner diameter of 50 microm were directly connected to a microchannel in a microchip. The detection limit by TLM was estimated as 2.8 x 10(-7) absorbance by measuring pure water. The detection limit of derivatized amino acids determined by CE-TLM was estimated as 2.4 x 10(-8) M, which was 100 times lower than that of conventional absorbance detection.     

Monitoring dopamine release from single living vesicles with nanoelectrodes

Carbon fiber nanoelectrodes (tip diameter = ca. 100 nm) have been first used to monitor real-time dopamine release from single living vesicles of single rat pheochromocytoma (PC12) cells. The experiments show that active and inactive release sites exist on the surface of cells, and the spatial distributions have been differentiated even in the same active release zone. It is first demonstrated that multiple vesicles can sequentially release dopamine at the same site of the cell surface, which possibly plays the main role in the dopamine release from PC12 cells.     

Analysis of alkyl polyglucosides in industrial products by capillary electrophoresis with pulsed amperometric detection

Pulsed amperometric detection following micellar electrokinetic chromatography has been applied successfully to the direct detection of alkyl polyglucosides (APGs) in shampoos and other industrial products without prior conversion to highly absorbing or fluorescing derivatives. For electrochemical detection, it is necessary to dissociate the hydroxyl groups of the APGs. Thus, we used 0.1 M NaOH in the outlet vial to dissociate the APGs. The main problems associated with the combination of electrochemical detection and capillary electrophoresis are the need to isolate the detector from the electric field used in the capillary electrophoresis separation and the difficulty of aligning the working electrode with the end of the capillary. To overcome these problems, a simple capillary-electrode holder was constructed. This holder automatically aligns the capillary and the electrode in a wall-jet configuration without the aid of micropositioners and facilitates the replacement of electrodes and capillaries without reconstruction of the entire capillary/electrode setup. Special microcylindrical gold electrodes have been produced by sealing 300-μm-diameter gold wire into borosilicate-glass capillaries.     

Application of a novel micro-injector in the determination of indole derivatives in the rat pineal gland by capillary electrophoresis with electrochemical detection

A novel micro-injector has been fabricated for capillary electrophoresis (CE). It was successfully used for the determination of some indole derivatives for example melatonin (MT), serotonin (5-HT), tryptophan (Trp), and 5-hydroxy-tryptophane (5-HTrp) in the rat pineal gland by capillary electrophoresis with electrochemical detection (CE–EC). CE was performed in 0.20 mol L^–1 phosphate buffer (pH 8.0). The compounds investigated can be well separated and detected within 15 min. The working electrode used was a 300-μm diameter carbon electrode positioned opposite the outlet of the capillary. The relationship between peak current and analyte concentration was highly linear in the range from 0.10 to 500 μmol L^–1; detection limits (S/N = 3) were 0.03–0.13 μmol L^–1. The proposed method has been successfully used to analyze real biological samples.     

Determination of the electrophoretic mobility of bacteria and their separation by capillary zone electrophoresis

Conditions for the determination of electrophoretic mobilities of bacteria by capillary electrophoresis (CE) were explored. Most precise values are obtained using fused silica capillaries of 1–3 m length (0.25 mm inner diameter), a background buffer with an ionic strength of 0.0015 mol/L and a pH value of 7–10 at a field strength of 120 V/cm. Capillary electrophoretic separation of three different bacteria populations on the basis of their mobility differences could be realized. Electrophoretic band widths of all bacteria populations investigated are relatively large compared to molecule bands. It finds its explanation in the different distribution of surface charge density to cross-sectional area of each single cell of a population.     

On-line cation-exchange preconcentration and capillary electrophoresis coupled by tee joint interface

An on-line preconcentration method based on ion exchange solid phase extraction was developed for the determination of cationic analytes in capillary electrophoresis (CE). The preconcentration-separation system consisted of a preconcentration capillary bonded with carboxyl cation-exchange stationary phase, a separation capillary for zone electrophoresis and a tee joint interface of the capillaries. Two capillaries were connected closely inside a 0.3 mm i.d. polytetrafluoroethylene tube with a side opening and fixed together by the interface. The preparations of the preconcentration capillaries and interface were described in detail in this paper. The on-line preconcentration and separation procedure of the analysis system included washing and conditioning the capillaries, loading analytes, filling with buffer solution, eluting analytes and separating by capillary zone electrophoresis (CZE). Several analysis parameters, including sample loading flow rate and time, eluting solution and volume, inner diameter and length of preconcentration capillary etc., were investigated. The proposed method enhanced the detection sensitivity of CE-UV about 5000 times for propranolol and metoprolol compared with normally electrokinetic injection. The detection limits of propranolol and metoprolol were 0.02 and 0.1 microg/L with the proposed method respectively, whereas those were 0.1 and 0.5 mg/L with conventional electrokinetic injection. The experiment results demonstrate that the proposed technique can increase the preconcentration factor evidently.