Further investigations of the interaction of trimethylsilyl azide with substituted maleic anhydrides. Synthesis of 4- and 5-aryl substituted 1,3-(3H)oxazine-2,6-diones

The reactions of phenyl-, o-chlorophenyl-, p-chlorophenyl-, 3,4-dichlorophenyl-, p-fluoro- and p-anisylmaleic anhydrides with trimethylsilyl azide are described. In all cases mixtures of isomeric 4- and 5-aryl-2H-1,3-(3H)oxazine-2,6-diones are obtained after hydrolysis with the 4-isomer predominating. The yield of 5-isomer is greatest for o-chlorophenyl maleic anhydride, and substantial for other arylmaleic anhydrides, indicating increased importance of steric effects in these reactions, in contrast to previously reported syntheses of methyl and halo-substituted oxazine-diones, where electronic factors appeared dominant.     

Mass spectra of some triaryl derivatives of the group V elements,P, As,Sb and Bi

Triphenyl and tri-o-, m- and p-tolyl compounds of the elements P, As, Sb and Bi have been studied as well as tri-(2,6-dimethylphenyl)phosphine. The m- and p-tolyl isomers show very similar behaviour and differ significantly from the o-derivatives. The differences can be largely attributed to steric effects in the o-isomers. Major fragmentation pathways to Group V element (Mt)-containing ions involve Mt? C and C? H, and from the tolyl compounds C? C bond cleavages. Throughout this paper the symbol Mt is used to refer to the Group V element.     

Dimerization of a Reactive Azaacene Diradical: Synthesis of a Covalent Azaacene Cage

Two series of regioisomeric dicyanomethylene substituted dithienodiazatetracenes with formal para- or ortho-quinodimethane subunits were synthesized and characterized. Whereas the para-isomers (p-n, diradical index y₀=0.01) are stable and isolable, the ortho-isomer (y₀=0.98) dimerizes into a covalent azaacene cage. Four elongated σ-CC bonds are formed and the former triisopropylsilyl(TIPS) -ethynylene groups transformed into cumulene units. The azaacene cage dimer (o-1)₂ was characterized by X-ray single crystal structure analysis and temperature-dependent infrared (IR), electron paramagnetic resonance (EPR, solid-state), nuclear magnetic resonance (NMR) and ultraviolet-visible (UV/Vis) spectroscopies (solution) indicating reformation of o-1.     

Stereo- and Regiochemical Effect of N,N-Dialkylamide Extractants on the Speciation of Pu Complexes

The relationship between extractant stereochemistry and their extraction performance has only poorly been established. In order to address a part of this concern, we investigated the Pu(IV) liquid-liquid extraction (LLE) by using the N,N-di-(2-ethylhexyl)butyramide (DEHBA), as well as those of its position isomers. DEHBA (ββ-isomer) and N-(2-ethylhexyl)-N-(oct-3-yl)butyramide (EHOBA or αβ-isomer) were synthesized as a mixture of stereoisomer or stereoenriched (R,S)- and (S,S)-diastereoisomers, and were all assessed for Pu^IV LLE. The results showed that both the position and the stereoisomerism of the aliphatic substituents affect Pu^IV complexation and extraction. We found that Pu extraction is lowered by factor 2 to 4 when the ethyl branching group is closer to the complexing site. UV-vis spectroscopy showed that this extraction decrease was affected by steric hindrance inducing a deprivation of Pu inner sphere complex. Effect of stereoisomerism is highlighted for branching closer to the complexing site (α-position). Enantiopure DEHBA stereoisomers provided similar Pu extraction, whereas a slight decrease could be noticed for the more cluttered stereoenriched (αβ)-isomers, which was also concomitant with a smaller population of inner sphere complex. In contrast, the stereoisomers mixture led to a strong decrease of Pu extraction because of an antagonistic association in the mixed complexes.     

Conformations of Z- and E-isomers of some chiral (1R,4R)-2-arylidene-p-menthan-3-ones

The ¹Í NMR method in combination with molecular simulation was used to study conformations of Z- and E-isomers of (1R,4R)-cis-2-(4-methoxyphenyl)benzylidene-p-menthan-3-one. In solutions the Z-isomer, unlike the conformationally uniform Å-isomer, is an equilibrium mixture of chair conformers with the substantial predomination of one form with the axially oriented methyl and equatorial isopropyl groups (75—78%). The enone group is more nonplanar in the Z-isomer than in the Å-isomer. For the isopropyl fragment, the equiprobable existence of trans- and two gauche-rotamers for the Z-isomer and a substantial predomination of gauche-forms in the case of the E-isomer were established.     

Synthesis and Stereoisomerization of 2-(1-Alkoxyimino-2,2,2-trifluoroethyl)-5-trimethylsilylfurans

2-(1-Alkoxyimino-2,2,2-trifluoroethyl)-5-trimethylsilylfurans were synthesized by the condensation of 2-(trifluoroacetyl)-5-trimethylsilylfuran with alkoxyamines. According to ¹H and ¹⁹F NMR spectroscopic data, the alkoxyimino group in the E-isomers descreens the H-3 and H-4 protons of the furan ring more strongly than in the Z-isomers, shifting their signals downfield. The fluorine atoms of the α-trifluoromethyl group in the Z-isomer are characterized by a downfield shift in relation to the E-isomer. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 834–838, June, 2005.     

Steric effects on excimer formation in isotactic and atactic polystyrene and poly(ar-methylstyrene)s in solution

Effects of tacticity and steric hindrance on excimer formation were investigated in isotactic and atactic polystyrene, poly(o-methylstyrene), poly(m-methylstyrene), and poly(p-methylstyrene) in the presence and absence of a quencher (CCl₄). The calculated rate constants for excimer formation in the isotactic polymers except for poly(o-methylstyrene) were almost the same and larger than those in the corresponding atactic polymers. These results indicate that excimer formation was due to not only rotational sampling but also energy migration to trapping sites. It was found that steric hindrance on excimer formation was intimately related to the excition diffusion length in the polymer chain.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

Free-radical copolymerization of L-(—)-menthyl methacrylate with acetylphenyl (meth)acrylates

The free-radical copolymerization of L-(—)-menthyl methacrylate with o- and p-acetylphenyl (meth)acrylates is performed to obtain new carbonyl-containing optically active copolymers. It is shown that the reactivity ratios and the yield of copolymers are lower for o-acetylphenyl methacrylate than those for the corresponding para isomer because of the steric hindrance from acetyl substituents in phenyl rings. The optical activity of the synthesized copolymers is estimated.     

Anionic polymerization of styrene in the presence of different anisoles

The butyllithium-initiated polymerization of styrene has been studied in toluene solution at 20°C in the presence of anisole, o-ethylanisole, and p-ethylanisole. The concentration of styrene was 0.16 mole/1.; the concentration of ether varied from 0.8 to 0.33 mole/1. The rates of initiation were followed spectrophotometrically at γ_max 330 mμ; they increased with increasing concentration of ether. The rates of propagation were measured dilatometrically. In the presence of anisole and p-ethylanisole, the rate expression is R_p = [M][PLi]^1/2(k₁ + k₂ [ether]), where k₁ is the propagation rate constant in pure hydrocarbon, k₂ that of the ether solvated chain end, and [PLi] denotes the concentration of polystyryllithium. On the contrary, o-ethylanisole did not affect the rate of propagation of styrene, possibly on account of the steric hindrance of the o-ethyl group. The apparent first-order termination rate constants were also determined spectrophotometrically at 20°C and compared to those of poly-o- and p-methoxystyryllithium. The following decreasing order of rate constant was found: poly-p-methoxystyryllithium > polystyryllithium-anisole > polystyryllithium–4-ethylanisole > polystyryllithium-2-ethylanisole > poly-o-methoxystyryllithium.     

Cationic copolymerization of phenyl propenyl ethers

Ring-substituted phenyl propenyl ethers were found to form homopolymers without any rearrangement by metal halides. Phenyl propenyl ethers were less reactive than the corresponding phenyl vinyl ethers in cationic polymerization. In order to study the electronic effect of a substituent on the reactivity, cis-p-Cl,p-CH₃, and p-CH₃O-phenyl propenyl ethers were copolymerized with phenyl propenyl ether in methylene chloride at ?78°C with stannic chloride–trichloroacetic acid, and their ¹H- and ¹³C-NMR spectra were measured. The reaction constant ρ against Hammett σ_p was ?2.1. The cis-phenyl propenyl ethers were slightly more reactive than the corresponding trans isomers. On the other hand, an o-methyl group decreased the reactivity of phenyl propenyl ether. The low reactivity of o-methyl phenyl propenyl ether was attributed to the steric hindrance between the propagating carbocation and the monomer.     

Selective detection of multiplets via double quantum coherence: A 19F NMR study of perfluorodecalin

Commercially obtained perfluorodecalin (octadecafluorodecahydronaphthalene) contains a mixture of cis- and trans-isomers, the ¹⁹F NMR signals of which overlap. The spectrum can be simplified and assignments can be made by using techniques based on double quantum coherence. The INADEQUATE method eliminates peaks due to the cis-isomer, and the DOUBTFUL method selectively detects two quartets of the trans-isomer.     

Crown ether styryl dyes

A novel styryl dye containing benzodithia-18-crown-6 andN-(4-sulfobutyl)benzothiazolium fragments was synthesized. The complex formation of thecis-isomers of several photochromic styryl dyes containing dithia-15(18)-crown-5(6) fragments with Hg²⁺ and Mg²⁺ ions was studied. The stability constants of the complexes with Mg²⁺ and the relative stability constants of the complexes with Hg²⁺ (with respect to benzo-1,10-dithia-18-crown-6 ether) were measured. The fact that the stability constant increases 11-fold on going from thetrans- to the correspondingcis-isomer was attributed to the formation of an anion-“capped” complex. For Part 22, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2213–2220, December, 1997.     

Direct diastereoselective introduction of l-menthol residue into 1,2,4-triazin-5(4H)-one

The reaction of 3-phenyl-1,2,4-triazin-5(4H)-one (1) with l-menthol in the presence of aliphatic acid anhydrides results in (6S)- and (6R)-1-acyl-6-(l-menth-3-yl)-1,6-dyhydro-3-phenyl-1,2,4-triazin-5(4H)-ones. The reaction is diastereoselective with predominant formation of (6S)-isomers. The reaction diastereoselectivity increases with enhancement of the steric hindrance in the vicinity of the reaction center of the azine.     

Configurations and conformations in acyclic,unsaturated hydrocarbons. A 13C NMR study

¹³C NMR (CMR) spectra of a number of di- and trisubstituted ethylenes have been measured. Very consistent values are found for the differential shieldings of allylic carbons in a number of linear, (Z)- and (E)-disubstituted ethylenes. The discrepancies between the several structural elements are explained tentatively by assuming different rotational preferences in the (Z)-isomers, the (E)-isomers, or both. The results obtained for some branched olefins are qualitatively in agreement with conclusions reached in previous ¹H NMR (PMR) investigations, with the possible exception of 2,5-diMe-3-hexene. Differential shieldings in trisubstituted ethylenes are larger than in disubstituted ethylenes, probably as a consequence of steric interaction between geminal substituents. It is confirmed, that API's recent relabelling of the isomers of 3-Me-2-hexene was justified. Furthermore, the (E)-configuration is assigned to the high-boiling isomer of 3,4,4-triMe-2-pentene. On the other hand, the high-boiling isomer of 3-Et-4-Me-2-pentene is shown to be the (Z)-isomer. For the isomeric pair of geraniol and nerol, the (E)-configuration is assigned to the former and the (Z)-configuration to the latter, in agreement with our recent PMR investigations.     

Configurational assignments of oximes derived from 5-formyl and 5-acyl-1,2,4-triazines

The configuration of (3-substituted)-1,2,4-triazin-5-ylcarbaldoximes and (3-substituted)alkyl-1,2,4-triazin-5-ylketoximes was determined by means of ¹H-nmr, ¹³C-nmr, ¹⁵N-nmr and homonuclear NOE-difference spec-troscopy. Oximes resulting from reaction of 1,2,4-triazines with nitroalkanes were found to be either pure E-isomers or E/Z-mixtures with the amount of E-isomer greatly predominating. Detailed ¹³C-nmr data of the oximes investigated are presented.     

CHLORINATION OF AROMATIC HALIDES WITH CHLOROSULFONIC ACID

Abstract

Chlorosulfonic acid–iodine mixture has been shown to chlorinate a number of aromatic halides under mild conditions. In reaction with p-dichlorobenzene, the maximum yield (82%) of hexachlorobenzene required 5 mol of chlorosulfonic acid and 2.5 mol of iodine. The yield of product increased with the amount of iodine present. A mechanism of chlorination is proposed involving iodine-catalysed homolytic decomposition of the intermediate sulfonyl chlorides followed by heterolytic chlorination by the evolved iodine monochloride.

The reaction of o-, m-, and p-dichlorobenzenes with chlorosulfonic acid has been investigated. o-Dichlorobenzene at 100° gave a good yield (85%) of 3,4,3′,4′-tetrachlorodiphenylsulfone although m and p-dichlorobenzenes gave only the expected sulfonyl chlorides. This difference arises from the lack of steric hindrance in the p-position of o-dichlorobenzene leading to facile sulfone formation.

This was confirmed by the observation that 3,4-dichlorobenzenesulfonyl chloride undergoes the Friedel–Crafts reaction with o-dichlorobenzene to give 3,4,3′,4′-tetrachlorodiphenylsulfone (60%), but m- and p-dichlorobenzenes did not give any appreciable amounts of the corresponding sulfones under identical conditions.     

Mass spectrometry of onium salts—I. Studies on anilinium oxides

The mass spectra of the three isomeric trimethylanilinium oxides and their methyl-d₃ analogues show that the m- and p- isomers undergo intermolecular trans-O-alkylation before evaporation. In the o-isomer, only 10% transalkylated product is observed and there is strong evidence that most of this isomer evaporates without undergoing structural changes. By indirect introduction, however, the o-isomer showed only transalkylated product. The most important fragmentation patterns on electron-impact are α-cleavage on the N-methyl carbon or expulsion of the O-substituent with formation of a quinoid structure. The latter dominates for the o- and p-methyl ethers while the former is the most important pathway for the m-isomer and for the corresponding phenols. Lower fragments are of modest intensity.     

Investigation of the reaction between sodium hydroxide and syn-and anti-isomers of 5-substituted 2-(4-chlorobutyryl)-aminobenzophenones oximes

By the reaction of syn-isomers of 5-substituted 2-(4-chlorobutyryl)aminobenzophenones oximes with NaOH syn-isomers of 5-substituted 2-(2-oxopyrrolidin-1-yl)benzophenones oximes were obtained. Similarly the anti-isomers of 5-substituted 2-(4-chlorobutyryl)aminobenzophenones oximes treated with NaOH underwent cyclization into anti-isomers of 5-substituted 2-(2-oxopyrrolidin-1-yl)benzophenones oximes. Crystal and molecular structures were investigated of the syn-isomer of 5-methyl-2-(2-oxopyrrolidin-1-yl)benzophenone oxime, the anti-isomer of 5-bromo-2-(2-oxopyrrolidin-1-yl)benzophenone oxime, and the syn-isomer of 5-methyl-2-(4-chlorobutyryl)aminobenzo-phenone oxime. The fragmentation features under the electron impact of syn-and anti-isomers of 5-substituted 2-(2-oxopyrrolidin-1-yl)benzophenones oximes are discussed.     

The effect of the position of the methyl group on the helical twisting powers of aldol condensation products of methyl cyclohexanones

The four aldol condensation products of methylcyclohexanone isomers and 4-(4-hexyloxybenzoyloxy)benzaldehyde have been prepared. These chiral products were either obtained with high enantiomeric excess or the enantiomers were separated by means of chiral HPLC. In all cases only the E-isomer was obtained. UV irradiation was used to isomerize the E-isomers to the Z-isomers. Comparison of the helical twisting powers (HTP) of the E-isomers revealed that the derivative in which the methyl group is directly next to the double bond exhibits the highest value. Although the other three E-isomers have lower HTP values, they show large HTP changes and reversal of the helical twist sense upon irradiation. Of these compounds, the one derived from the commercially available (R)-3-methylcyclohexanone is an interesting candidate for use as an alternative to compounds derived from menthone for realizing photochemically induced twist changes in twisted nematic and cholesteric materials.