Vinyl polymerization initiated by system of organic halides and tertiary amines

A study of the polymerization of vinyl monomers with binary systems of tertiary amines and various organic halides containing chemical bonds such as C? Cl, N? Cl, O? Cl, S? Cl, and Si? Cl has been made at 60°C. Some of the binary systems were found to be effective as radical initiator in the polymerization of methyl methacrylate. The relative initiating activities of the halides in the presence of dimethylaniline were found to be in the following order: tert-C₄H₉OCl > n-C₄H₉NCl₂ > (n-C₄H₉)₂NCl ? CH₃SiCl₃ ? C₆H₅SiCl₃ > C₆H₅SO₂Cl > C₆H₅Cl > C₆H₅PCl₂. Styrene and vinyl acetate polymerized only with the initiator system of dimethylaniline and benzyl chloride. Tri-n-butylamine was less active than dimethylaniline. Pyridine and 4-vinylpyridine, in combination with some organic halides, also initiated the polymerization of methyl methacrylate. The N-vinylcarbazole–benzenesulfonyl chloride system, in the presence of methyl methacrylate, gave only the homopolymer of N-vinylcarbazole.     

Metal-containing initiator systems. IV. Polymerization of methyl methacrylate by systems of some activated metals and organic halides

A study of the polymerization of methyl methacrylate initiated by the binary systems of some activated metals and organic halides has been made. It was found that the initiator activities of these systems were greatly dependent on the kind and the preparation or activation method of the metals (i.e., oxidation potential, surface area, and purity), and also on the kind of organic halides (i.e., bond-dissociation energy of their carbon–halogen bonds). From the kinetic studies of the polymerization at 60°C with the system reduced nickel–carbon tetrachloride, the rate of polymerization was found to be proportional to the monomer concentration and to the square root of concentration of both nickel and carbon tetrachloride at the lower concentration range of carbon tetrachloride, indicating that the system induced the radical polymerization. A similar conclusion was also obtained from the copolymerization with styrene with this system at 60°C, i.e., the resulting copolymer composition curve was in agreement with that obtained with azobisisobutyronitrile (AIBN). The apparent overall activation energy for the methyl methacrylate polymerization with this system was estimated to be 7.5 kcal/mole, which was considerably lower than that with AIBN. On the basis of the results obtained, an initiation mechanism for the polymerization with these initiator systems is presented and discussed.     

有机过氧化物与N-甲基-N-2-羟乙基苯胺引发体系的研究

测定了有机过氧化物与N-甲基-N-2-羟乙基苯胺(HMA)体系引发MMA聚合的动力学方程和聚合表现活化能。由过氧化物/HMA/MNP的ESR波谱证实芳叔胺HMA中,与氮原子相连的亚甲基的氢被摘去形成相应的碳自由基,它能引发单体聚合成为聚合物的端基。这也由聚合物的UV光谱所证实,由实验结果提出这类体系的引发机理。     

有机过氧化物与N-甲基-N-2-羟乙基苯胺引发体系的研究

 测定了有机过氧化物与N-甲基-N-2-羟乙基苯胺(HMA)体系引发MMA聚合的动力学方程和聚合表现活化能。由过氧化物/HMA/MNP的ESR波谱证实芳叔胺HMA中,与氮原子相连的亚甲基的氢被摘去形成相应的碳自由基,它能引发单体聚合成为聚合物的端基。这也由聚合物的UV光谱所证实,由实验结果提出这类体系的引发机理。     

有机过氧化物与二元叔胺引发体系的研究

<正> 过氧化苯甲酰(BPO)引发烯类单体的聚合,可以添加芳叔胺N,N-二甲苯胺、N,N-二甲基对甲苯胺(DMT)促进BPO的分解而提高聚合速度。关于有机过氧化物与多元胺体系的研究,虽然有一些报道,但主要是多元伯胺或仲胺的体系,如异丙苯过氧化氢(CHP)与四亚乙基五胺或与二亚乙基三胺体系。本文采用BPO、LPO(过     

Polymerization of Vinyl Monomers with Binary Initiator System of N-Chlorosuccinimide and Lewis Acids

The polymerization of vinyl monomers with a binary system composed of N-chlorosuccinimide (NCS) and some Lewis acids was investigated by means of kinetic and spectral determinations. It was found that the NCS-ZnCl₂ system was the most effective as an initiator of radical polymerization of methyl methacrylate, and this polymerization was initiated by a radical produced via the reaction of NCS and ZnCl₂, and terminated bimolecularly. By applying a spin trapping technique to the reaction of NCS with ZnCl₂, it was shown that the initiating radical was N-succinimidyl radical which was obtained through a homolysis at the N-Cl bond.     

Polymerization of vinyl monomers in the water–1,4-dioxane system containing peroxide and water-soluble polymer

Water-solube polymer (PST) containing triethylenetetramine side chain was prepared by the amination of chloromethylated polystyrene with triethylenetetramine in 1,4-dioxane. The polymerization of vinyl monomers was carried out in the water–organic solvent system containing PST and a very small amount of peroxide. The polymerization of methyl methacrylate proceeded smoothly in the presence of both peroxide and PST. It was found that the polymerization was initiated with the radicals generated by the interaction between hydroperoxide and amino groups of PST. 1,4-Dioxane hydroperoxide showed a high activity for the polymerization of methyl methacrylate. The maximum rate of the polymerization was observed at 60°C and in an approximately neutral solution. The addition of suitable amount of Cu(II) accelerated the polymerization of methyl methacrylate. The selective polymerization of vinyl monomers was observed in this system.     

STUDIES ON THE ORGANIC PEROXIDE-DITERTIARY AMINE INITIATION SYSTEMS

Radical polperization of methyl methacrylate (MMA) initiated with organic peroxide-ditertiaryamine binary systems was studied. Benzoyl peroxide (BPO), lauroyl peroxide (LPO), t-butyl hydro-peroxide (TBH), and t-butyl peroxybenzoate (TBPB) were used as organic peroxide components,aromatic ditertiay amine 4, 4′-tetramethyldiaminodiphenylmethane (TMDAPM) an d aliphatic di-tertiary amine tetramethylethylenediamine (TMEDA) were used as amine components. The polymeri-zation rate R_P, the overall activation energy of polymerization E_a, the rate equation of MMA poly-merization, and the end group of polymer formed were determined.     

Metal-Containing Initiator Systems. IX. Radical Polymerizations of Vinyl Monomers by Various Metal Acetylacetonates

Abstract

A study of the polymerization of styrene, methyl methacrylate, acrylonitrile, vinyl acetate, and vinyl chloride initiated by various metal acetylacetonates [Me(acac)_x] has been made. It was found that Mn(acac)₃ was the most effective initiator, and Co(acac)₃, Mn(acac)₂, Cu(acac)₂, and Cr(acac)₃ showed moderate activity for the polymerization of methyl methacrylate at 60°C. However, the other, Me(acac)_x, had no effect or served as inhibitors. The addition of some additives such as halogen compounds did not accelerate polymerization of methyl methacrylate by Mn(acac)₃, From the results of polymerization and copolymerization of methyl methacrylate by Mn(acac)₃, it was concluded that the polymerization proceeded via an ordinary radical mechanism and the activation energy for initiation was 25.2 kcal/mole. The initiation mechanism of vinyl polymerization by Me(acac)_x was studied on the basis of the complex formation with the monomer.     

Polymerization of vinyl monomers with salts of bronsted acids

The polymerization of vinyl monomers (N-phenylmaleimide, acrylamide, acrylonitrile, methyl vinyl ketone, methyl methacrylate, vinyl chloride, and styrene) with sodium salts of Brønsted acids (sodium cyanide, sodium nitrite, sodium hydroxide, etc.) were investigated at 0°C in dimethylformamide. N-Phenylmaleimide, acrylonitrile, and methyl vinyl ketone were found to undergo polymerization with sodium cyanide, however the other monomers were not polymerized with this salt. In the polymerizations of acrylonitrile and N-phenylmaleimide with sodium cyanide, the rates of the polymerizations were found to be proportinal to the initiator concentration and to the square of the monomer concentration. The activation energy of acrylonitrile polymerization was 3.7 kcal/mole, and that of N-phenylmaleimide ws 3.0 kcal/mole. The results of the copolymerization of acrylonitrile with methyl methacrylate at 0°C in dimethyl-formamide with sodium cyanide confirm that these polymerizations proceeded by an anionic mechanism initiated by the Michael addition reaction of the monomers with the salts. In these polymerizations, the monomer reactivity increased with increase in the e values. The initiation ability of sodium salts increased with increasing pK_a of the conjugate acids and with decreasing electronegativity of metal ion in the series of lithium, sodium, and potassium cyanide. The polymerizations took place only in aprotic polar solvents, and did not occur in weak polar solvents and in protonic solvents.     

Graft polymerization of vinyl monomers inside macroporous polyacrylamide gel,cryogel, in aqueous and aqueous‐organic media initiated by diperiodatocuprate(III) complexes

Graft polymerization initiated by diperiodatocuprate(III) complex (Cu(III)) initiator was found to be an effective and convenient method for graft polymerization of vinyl monomers onto macroporous polyacrylamide gels, the so‐called cryogels (pAAm‐cryogels). The effect of time, temperature, monomer and initiator concentration during the graft polymerization in aqueous and aqueous‐organic media was studied. The graft polymerization of water‐soluble monomers as [2‐(methacryloyloxy)ethyl]‐trimethylammonium chloride, 2‐hydroxyethyl methacrylate, N‐isopropylacrylamide, and N,N‐dimethylacrylamide proceeds with higher grafting yield in aqueous medium, as compared with that in aqueous‐organic media. Graft polymerization in aqueous‐organic media such as water–DMSO solutions allows grafting of water‐insoluble monomers such as glycidyl methacrylate and N‐tert‐butylacrylamide with high grafting degrees of 100 and 410%, respectively. It was found that the deposition of initiator on the pore surface of cryogels promoted graft polymerization by facilitating the formation of the redox couple Cu(III)‐acrylamide group. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1952–1963, 2006     

Vinyl Polymerization. 371. Polymerization of Methyl Methacrylate Initiated by the System of Polyvinylferrocene and Carbon Tetrachloride

The polymerization of vinyl monomers initiated with the system of polyvinylferrocene (PVFc) and carbon tetrachloride (CCl₄) was carried out in dark. Methyl methacrylate (MMA) and acrylonitrile (AN) could be polymerized, while styrene (St) was hardly polymerized under the conditions used. The polymerization proceeded through a free-radical mechanism and was concluded to be initiated by attack of vinyl monomer, having a polarized vinyl group, on the charge-transfer complex of PVFc/CCl₄. In the polymerization of MMA, the initiating ability of PVFc was much larger than that of ferrocene (Fc-H) or poly(ferrocenylmethyl methacrylate) (PFMMA) and was comparable to that of polyferrocenylenemethylene (PFM). The overall activation energy was estimated to be 34.2 kJ/mole.     

Studies on ceric–thiol-initiated aqueous vinyl polymerization with particular reference to end groups in poly(methyl methacrylate)

Ceric-thiol systems are good initiators for the acid aqueous polymerization of some water-soluble Vinyl monomers although not for styrene (in aqueous emulsion) and vinyl acetate. Thiols used are 2-mercaptoethanol, thioglycolic acid, 2-mercaptoethylamine hydrochloride, and L -cysteine hydrochloride. The polymerization proceeds through a radical mechanism. End-group analysis of poly(methyl methacrylate) obtained by initiation with various ceric-thiol systems has been carried out using Palit's dye testes. Hydroxyl, carboxyl, and amine end groups (to the extent of about one per polymer molecule) were incorporated in poly(methyl methacrylate)s obtained by initiation with 2-mercaptoethanol, thioglycolic acid, and 2-mercaptoethylamine hydrochloride, respectively, each in combination with Ce⁴⁺ ions; both amine and carboxyl end groups were obtained using C⁴⁺/L -cysteine hydrochloride initiator system. From the end-group results, the initiating species have been identified and the initiation mechanism prooposed. The probable termination mechanism also has been discussed.     

Polymerization of methyl methacrylate induced with the peracid-type ion exchange resin

The polymerization of methyl methacrylate initiated with a peracid-type resin was studied. The peracid-type resin was prepared by the oxidation of cation-exchange resin (Amberlite IRC-50) with 60 wt-% aqueous hydrogen peroxide in the presence of p-toluenesulfonic acid. It was found that the peracid-type resin was effective as an initiator for polymerization of methyl methacrylate. The kinetic investigation indicated that this polymerization proceeded by a radical mechanism, and the overall activation energy of polymerization was 15.8 kcal/mole. No effect of macromolecular catalyst on steric structure of the resulting polymer was observed. Some graft polymer was formed in bulk polymerization. On the other hand, only a homopolymer was obtained in solution polymerization. From the results obtained, a possible mechanism of initiation with the peracid-type resin is proposed and discussed.     

Polymerization of methyl methacrylate initiated by tri-n-butylborane–organic halide systems

The polymerization of methyl methacrylate (MMA) initiated by tri-n-butylborane (TBB) was studied in the presence of various organic halides (R′X). It was found that R′X accelerated the polymerization of MMA. Aliphatic halides were more effective than aromatic halides. Cocatalytic effects of butyl halides decreased in the order: n -BuI > n -BuBr > n -BuCl; n -BuBr ? sec-BuBr > i-BuBr > tert-BuBr. In the polymerization of MMA by TBB- n -BuI, the initial rate of polymerization was found to be proportional to the concentration of MMA and to the square root of the concentration of TBB-n-BuI. The apparent activation energy was 5.3 kcal/mole. From this and other results, it was assumed that the polymerization of MMA by this initiator system proceeds by a radical mechanism via a weak complex between TBB and R′X; alkyl radicals are formed by the interaction of R′X with TBB. The TBB–R′X system can initiate the polymerization of MMA and AN, but is ineffective in the polymerization of styrene.     

Vinyl Polymerization Catalyzed by AIEt3-Hexamethyl Phosphoric Acid Triamide Complex

The polymerization of methyl methacrylate and acrylonitrile is shown to occur by an anionic mechanism initiated by a 1:1 complex between triethyl aluminum and hexamethyl phosphoric acid triamide at a relatively high temperature. This complex can also initiate the radical polymerization of vinyl monomers at relatively low temperatures.

A tentative initiation mechanism is presented.     

Effect of amines on vinyl polymerization initiated by chromous acetate–alkyl halide systems

The radical polymerization of vinyl monomers initiated by Cr²⁺–RX in the presence of various amines was studied in DMF at 30°C. Polyamines able to form the chelate complex with Cr²⁺ accelerated the rate of polymerization of styrene in the following order: ethanolamine > triethylenetetramine > diethylenetriamine > ethylenediamine. However, aliphatic monoamine, hexamethylenediamine, and aromatic diamine did not have any effect on the polymerization. These results suggest that the effect of multidentate ligands may be associated with chelating effects which affect the electron transfer ability of the metal complex. An apparent activation energy of 8.2 kcal/mole for the polymerization of styrene was obtained in the presence of ethanolamine. With the Cr²⁺–CHCl₃ system, on addition of ethanolamine, the polymerization of methyl methacrylate was accelerated, and acrylonitrile and vinyl chloride, could be polymerized.     

STUDIES ON ORGANIC PEROXIDE/N, NDI (2-α-METHYL-ACRYLOYLOXY PROPYL)-PARA-TOLUIDINE BINARY SYSTEMS

The polymerization of methyl methacrylate (MMA) initiated by organic peroxide and polymerizable aromatic tertiary amine such as N, N-di (2-α-methylacryloyloxy propyl)-p-toluidine (MP)_2PT binary system has been studied. It was found that the (MP)_2PT promotes MMA polymerization, and the kinetics of MMA polymerization fits the radical polymerization rate equation. Based on the ESR studies and the end-group analysis the initiation mechanism is proposed.     

The initiation of vinyl polymerization by tetrakis (trialkyl-phosphite) nickel (o) derivatives

The study of the polymerization of vinyl monomers initiated by zero-valent nickel phosphite derivatives in the presence of organic halides has been extended to tetrakis (triethylphosphite) nickel (o) and tetrakis (tri 2-chloroethylphosphite) nickel (o). A kinetic study with methyl methacrylate and carbon tetrachloride shows that the polymerization proceeds by a free radical process and that the mechanism of initiation resembles that previously reported for the corresponding triphenylphosphite and carbonyl derivatives. The primary process which becomes rate determining at sufficiently high carbon tetrachloride concentration is the nonreversible S_N1 scission of an alkylphosphite ligand. These alkylphosphite initiators are considerably more active than the corresponding carbonyl derivatives, but are less active than the corresponding triphenyl-phosphite derivative. The difference in activities between the aryl and alkylphosphite derivatives has been accounted for by differences in steric over-crowding of these molecules.     

Vinyl polymerization. 416. Polymerization of vinyl monomer initiated by polyethyleneglycol

The polymerization of vinyl monomer initiated by polyethyleneglycol (PEG) in aqueous solution was carried out at 85°C with shaking. Acrylonitrile (AN), methyl methacrylate (MMA), and methacrylic acid were polymerized by PEG–300 (M?_n = 300), whereas styrene was not. The effects of the amounts of monomer and PEG, the molecular weight of PEG, and the hydrophobic group at the end of PEG molecule on the polymerization were studied. The selectivity of vinyl monomer and the effect of the hydrophobic group are discussed according to “the concept of hard and soft hydrophobic areas and monomers.” The kinetics of the polymerization was investigated. The overall activation energy in the polymerization of AN was estimated as 37.9 kJ mol^?1. The polymerization was effected by a radical mechanism.