Capillary batch injection analysis and capillary flow injection analysis with electrochemical detection: a comparative study of both methods

Capillary batch injection analysis (CBIA) and capillary flow injection analysis (CFIA) in combination with electrochemical detection as well as optical detection methods were studied and compared with respect to their performance. Despite the differences in technical equipment both techniques share the same idea of reproducible transport and washout of nanolitre samples over sensing surfaces. Thus the same electrochemical flow cell can be used for both CBIA and CFIA. The amperometric and potentiometric CBIA responses were studied under various experimental conditions in order to optimise the CBIA set-up. In particular, the density of the sample solution relative to that of the cell electrolyte had a remarkable effect on the hydrodynamic characteristics of CBIA. Dispersion in CFIA was investigated using on column UV-detection for electroosmotic flow (EOF) conditions as well as for gravity flow conditions. It is demonstrated for a 75 μm capillary that the relative band broadening of the sample plug under gravity flow is only about twice as large as under EOF. Furthermore, dispersion in a system that involves a chemical reaction between the sample and the carrier solution, namely CrO₇ ^2– and Fe²⁺ has been investigated by amperometric detection and exploited for the determination of dichromate microsamples.     

Capillary electrophoresis and capillary flow injection analysis with electrochemical detection

Measurements by capillary flow injection analysis (CFIA) and capillary electrophoresis (CE) in conjunction with electrochemical detection are described. The detection is based on an end-column electrode arrangement. Several novel electrodes, such as a spherical gold electrode and a dual-microdisk electrode, are presented and characterized regarding their analytical utility. In order to improve the selectivity of CFIA, dual-electrode and multiple-pulse detection are studied using couples of cyanometallates or metallocenes. Capillary electrophoretic experiments with amperometric detection are performed using 50 m i.d. capillaries without any electrical-field decoupler. The practicality and analytical characteristics of this detection strategy are illustrated for the separation of serotonin and some biological precursors and metabolites of neurotransmitter substances.     

Determination of cyanide in microsamples by means of capillary flow injection analysis with amperometric detection

A new approach for determining cyanide in microsamples is described. The method is based on capillary flow injection analysis (CFIA) with amperometric detection. The sensing electrode is a silver-plated microdisk electrode, where cyanide can react under formation of a dicyanoargentate complex. A remarkably low mass detection limit of 231 fmol cyanide is obtained for an injection volume of 60 nl. The sample throughput of the CFIA-arrangement is comparable with a conventional sized FIA-system. A practical application is given by analyzing the cyanide (amygdalin) concentration in apple kernels.     

Comparison of μm and mm sized disk electrodes for end-column electrochemical detection in capillary electrophoresis

End-column electrochemical detection based on either the use of a 25 μm microdisk electrode or a 0.5 mm macrodisk electrode has been compared with respect to performance and influence on non-aqueous capillary electrophoretic separations. Despite the much higher coulometric efficiency obtained with the larger disk electrode, the microdisk electrode configuration offers comparable limits of detection (LOD) for the neutral and positively charged ferrocene compounds employed in conjunction with a non-aqueous acetonitrile-based buffer. The LODs for ferrocene were found to be 4.0 × 10^–8 M and 6.7 × 10^–8 M for the microdisk and macrodisk detector, respectively. In addition, both detector arrangements showed different relative responses for neutral and positively charged analytes. The macroelectrode-based detector introduced additional zone broadening while this was not found to be the case with the microelectrode arrangement. Using the microelectrode detector, the band broadening in an electro-osmotically driven flow system was compared to that in a gravity flow-based system. It was demonstrated that the zone broadening under gravity flow conditions was approximately twice as large as under electro-osmotic flow conditions for a typical set of experimental parameters. Received: 1 June 1998 / Revised: 20 August 1998 / Accepted: 24 August 1998     

Amperometric detection for capillary flow injection analysis

Ultrasmall-volume measurements of oxidizable compounds have been accomplished by coupling a capillary flow injection system with amperometric detection. Remarkably low (femtomole) mass detection limits result from the combination of nanoliter sample volume and the inherent sensitivity of the wall-jet detector. A substantial economy of reagent consumption and disposal accrues from the operation of the nl/min flow regime. Variables influencing the physical dispersion in the capillary flow injection system, including capillary length, sample volume or flow rate, are explored and optimized.     

Internal standard in flow injection analysis with amperometric detection

In this work, we describe for the first time the use of the internal standard method in flow injection analysis (FIA) with amperometric detection. The method is based on the application of sequential potential pulses to the working electrode in an electrochemical flow cell. The sequence of potential pulses is selected in such a way that the analyte and internal standard compound are detected and monitored individually and independently at the same working electrode. This approach compensates for random errors associated with variations of flow rate, injection volume, ionic strength difference between standards and samples, and accidental insertion or formation of air bubbles in the carrier stream. In addition, this method can overcome the major drawback of amperometric detection using solid electrodes, which is gradual electrode passivation. To illustrate the potential of this method, the flow-injection amperometric detection of uric acid using [Fe(CN)₆]^3? as an internal standard (IS) is presented as an example.     

Flow injection chemiluminescence determination of medazepam

A new flow injection chemiluminescence method for the assay of medazepam is explored. The method involves the use of permanganate in sulfuric acid for the oxidation of medazepam with the emission of chemiluminescence detected by a photomultiplier tube. A simplex procedure was employed for optimising the conditions for high sensitivity detection, which were found to be 1.03 × 10^–3 mol L^–1 permanganate, 0.153 mol L^–1 sulfuric acid and 3.43 mL min^–1 flow rate. The linear calibration range was 3.7 × 10^–5 to 1.7 × 10^–3 mol L^–1. The detection limit (3σ) and the sample throughput were 1.85 × 10^–5 mol L^–1 and 100 per hour, respectively. The relative standard deviation for 5 replicate determinations of 1.9 × 10^–4 mol L^–1 medazepam was 0.15%. Common excipients (starch, glucose, maltose, lactose) used in pharmaceutical preparations had no effect. Received: 2 February 1998 / Revised: 20 May 1998 / Accepted: 25 May 1998     

Improving precision of manual hydrodynamic injection in capillary electrophoresis with contactless conductivity detection

Reproducible injection in capillary electrophoresis has been difficult to achieve with manual injection techniques using simple injection devices, such as gravity injection (siphoning) or hydrodynamic sample splitting. We demonstrate that the injection reproducibility can be improved using very simple means. With hydrodynamic sample splitter, a passive micro-metering valve can be inserted in-line to regulate the sample flow rate through the splitter interface. A significant improvement of both reproducibility and repeatability was achieved. The reproducibility of RSD of the peak areas improved from 25.4% to 4.4%, while the repeatability was below 4.1% when micro-metering valve was used. Additional simple correction that can be used to further improve the variability of injected sample volumes in any hydrodynamic injection mode in CE with conductivity detection was proposed and verified. The measured EOF peak can serve as a simple indicator of the injected volume and can be effectively used for additional correction. By a linear function between the injection volume and the peak area of the EOF, the RSD values of peak areas for both manual gravity injection and hydrodynamic sample splitter were further improved below 2% RSD. The linearity of the calibration curve was also significantly improved. The proposed correction works even with slight differences in matrix composition, as demonstrated on the analysis aqueous soil extract of model mixture of five nerve agent degradation products.     

Electroosmotic flow-balanced isotachophoretic stacking with continuous electrokinetic injection for the concentration of anions in high conductivity samples

An EOF counter-balanced ITP boundary has been used to stack anions from high conductivity samples during continuous electrokinetic injection of the sample. In a polystyrenesulfonate/poly(diallyldimethylammonium chloride) polyelectrolyte coated capillary, the time at which the ITP boundary exited the capillary could be prolonged by balancing the movement of the boundary with the EOF. Using a bis-tris-propane electrolyte, the ITP boundary was removed from the capillary within 7 min, while when using triethanolamine the ITP boundary was still at 30% of the capillary after 2 h of injection. Using these systems, the sensitivity of a mixture of simple organic acids in 100 mM Cl⁻ was improved by 700–800-fold using bis-tris-propane with a whole-capillary injection of the sample and 5 min of electrokinetic injection at +28 kV, and 1100–1300-fold using triethanolamine and 60 min of electrokinetic injection under the same conditions. The potential of the method to be applicable to high conductivity samples was demonstrated by stacking a whole capillary filled with urine spiked with naphthalenedisulfonic acid, with limits of detection 450 times lower than those achievable with a normal hydrodynamic injection.     

Amperometric biosensor for oxalate determination in urine using sequential injection analysis

An amperometric flow biosensor for oxalate determination in urine samples after enzymatic reaction with oxalate oxidase immobilized on a modified magnetic solid is described. The solid was magnetically retained on the electrode surface of an electrode modified with Fe (III)-tris-(2-thiopyridone) borate placed into a sequential injection system preceding the amperometric detector. The variables involved in the system such as flow rate, aspired volumes (modified magnetic suspension and sample) and reaction coil length were evaluated using a Taguchi parameter design. Under optimal conditions, the calibration curve of oxalate was linear between 3.0-50.0 mg·L^-1, with a limit of detection of 1.0 mg·L^-1. The repeatability for a 30.0 mg·L^-1 oxalate solution was 0.7%. The method was validated by comparing the obtained results to those provided by the spectrophotometric method; no significant differences were observed.     

Batch‐injection versus Flow‐injection Analysis Using Screen‐printed Electrodes: Determination of Ciprofloxacin in Pharmaceutical Formulations

This article highlights the potential use of multi‐walled carbon‐nanotube modified screen‐printed electrodes (SPEs) for the amperometric sensing of ciprofloxacin and compares the association of batch‐injection analysis (BIA) and flow‐injection analysis (FIA) with amperometric detection. Both analytical systems provided precise (RSD<5 %) and sensitive determination of ciprofloxacin (LOD<0.1 μmol L^?1) within wide linear range (up to 200 μmol L^?1). Accuracy of both methods was attested by recovery values (93–107 %) and comparison with capillary electrophoresis. The BIA system is completely portable (especially due to association with SPEs) and provided faster analyses (130 h^?1) and more sensitive detection than the FIA system due to the higher flow rates of injection.     

Construction and Application of Flow Enzymatic Biosensor Based of Silver Solid Amalgam Electrode for Determination of Sarcosine

In this paper, the flow amperometric enzymatic biosensor based on polished silver solid amalgam electrode for determination of sarcosine in model sample under flow injection analysis conditions is presented. The biosensor works on principle of electrochemical detection of oxygen decrease during enzymatic reaction which is directly proportional to the concentration of sarcosine in sample. The whole preparation process takes about 3 h. The RSD of repeatability of 10 consecutive measurements is 1.6 % (c_sarcosine=1.0×10^?4 mol dm^?3). Under optimal conditions the calibration dependence was linear in the range 7.5×10^?6–5.0×10^?4 mol dm^?3 and limit of detection was 2.0×10^?6 mol dm^?3.     

A capillary electrophoresis chip with hydrodynamic sample injection for measurements from a continuous sample flow

A microchip-based capillary electrophoresis device supported by a microfluidic network made of poly(dimethylsiloxane), used for measuring target analytes from a continuous sample flow, is presented. The microsystem was fabricated by means of replica molding in combination with standard microfabrication technologies, resulting in microfluidic components and an electrochemical detector. A new hydrodynamic sample injection procedure is introduced, and the maximum number of consecutive measurements that can be made with a poly(dimethylsiloxane) capillary electrophoresis chip with amperometric detection is investigated with respect to reproducibility. The device features a high degree of functional integration, so the benefits associated with miniaturized analysis systems apply to it.     

On-line concentration by head-column field amplified sample injection for the analysis of berberine, palmatine and jatrorrhizine in herbal medicine by flow injection-micellar electrokinetic chromatography

A simple, sensitive and continuous on-line stacking technique using head-column (HC)-field amplified sample injection (FASI) and sweeping was developed by combination of flow injection with micellar electrokinetic chromatography. Berberine, palmatine and jatrorrhizine were selected as model mixture to demonstrate this stacking method. Based on the characteristic of a 16-way injection valve (16-V), a sample was injected electrokinetically into a capillary after the introduction of a plug of water. Under optimum conditions, 64–86-fold improvement in the detection sensitivity was obtained for the analytes and the sample throughput can reach up to 24 h⁻¹ using the background electrolyte containing 240 mM ammonium acetate (pH 4.7), 30% (v/v) ethanol, and 2% (v/v) polyoxyethylene sorbitan monolaurate (Tween 20). The repeatabilities (n = 4) reached relative standard deviation values of 1.2, 2.7 and 3.1% for the peak areas and 1.6, 3.3 and 3.8% for peak heights of berberine, palmatine and jatrorrhizine, respectively. The limit of detection for the berberine, palmatine and jatrorrhizine was found to be 27, 26, 22 ng mL⁻¹ (S/N = 3).     

Electrochemically assisted injection – a new approach for hyphenation of electrochemistry with capillary-based separation systems

A new concept based on the electrochemical conversion of analyte species during the injection into capillary flow systems is presented. This approach is termed electrochemically assisted injection (EAI). In a specially designed injection cell containing the analyte solution a conversion efficiency of about 83% can be achieved. Potassium octacyanotungstate(IV) served as a model compound for the analytical characterisation of EAI applying capillary flow injection analysis with double-pulse amperometric detection. Capillary electrophoresis experiments were performed using EAI to study the electrochemical oxidation of various ferrocene derivatives in acetonitrile solution. The electropherograms recorded with UV detection show separated signals for the ferrocene compounds and their oxidation products. The migration behaviour and the stability of ferrocenium cations and other reaction products were investigated.     

Determination of Cr(III) in urine, blood serum and hair using flow injection chemiluminescence analysis

A flow injection (FI) chemiluminescence method for the determination of Cr(III) in blood serum, urine and hair samples is reported. It is based on the chromium-catalyzed light emission from the luminol oxidation by hydrogen peroxide. The apparatus consists of an FI system with a flow cell formed by a coiled transparent tube suitable for chemiluminescence detection. The specificity of the method is achieved in presence of EDTA. The detection limit under optimum conditions is 0.01 μg L^–1 of Cr(III). Precision and accuracy were evaluated by determining Cr(III) concentrations in urine standards from the National Institute of Standard and Technology (NIST). Received: 30 June 1997 / Revised: 16 January 1998 / Accepted: 23 January 1998     

Analysis of formic and acetic acid in rain water by capillary electrophoresis

A simple technique is described for the routine capillary electrophoretic determination of formic and acetic acid in rain water. These acids were determined simultaneously in approximately 6 min using a carrier electrolyte containing lO mM phosphate and 0.5 mM myristyltrimethylammonium bromide (MTAB) as electroosmotic flow (EOF) modifier at pH 6.5 and direct UV detection at 185nm. The method is quantitative, with recoveries in the 99-101% range and linear up to 5mgL^-1. The precision is better than 2.1% and the procedure shows the appropriate sensitivity, with detection limits between 0.042 and 0.055mg L^-1. The proposed method was successfully employed for the determination of formic and acetic acid in 57 rain water samples, collected from October 2000 to February 2001 in four different sampling stations located in Galicia (NW Spain), by direct sample injection after filtration.     

On-line sequential preconcentration of inorganic anions by anion-selective exhaustive injection and base-stacking in capillary zone electrophoresis

A sequential electrostacking method based on anion-selective exhaustive injection (ASEI) and base-stacking (BS) is presented for the preconcentration and determination of inorganic anions by capillary zone electrophoresis (CZE) in this paper. Tetradecyltrimethylammonium bromide as an electroosmotic flow (EOF) modifier was added into the buffer to suppress EOF of the capillary. Firstly, a water plug was hydrodynamically injected into the capillary. During ASEI under negative high voltage, the sample anions migrated quickly towards the boundary between the water plug and buffer in the capillary. Then an alkaline zone was injected electrokinetically to concentrate the anions further. With the sequential electrostacking method, the preconcentration factor of (0.8-1.3) x 10(5) was obtained compared with the conventionally electrokinetic injection and the relative standard deviation of peak area was 3.3-5.3% (n = 5). The detection limits of ASEI-BS-CZE for six inorganic anions were 6-14 ng/L. The proposed method has been adopted to analyze six anions in cigarette samples successfully.     

Dual opposite injection electrokinetic chromatography: nonionic microemulsion pseudostationary phase and novel approach to electrokinetic sampling bias

Dual opposite injection capillary electrophoresis (DOI-CE) is a family of CE techniques in which the sample is introduced into both ends of the capillary. For the analysis of compounds with widely varying pKa values using a voltage-driven separation scheme, DOI-CE is superior to conventional CE with sample introduction at only one end of the capillary due to DOI-CE's broader elution window. To enhance the DOI-CE separation, a running buffer with a microemulsion system was developed. Since DOI-CE works best under conditions of low electroosmotic flow (EOF), the suppression of EOF via the addition of a multiply charged cation (e.g., Zn2+) to the buffer was investigated, and was found to suppress the EOF effectively at moderate concentrations (2.5-10 mM). Three different dual opposite injection modes were studied: simultaneous electrokinetic injection, sequential electrokinetic injection, and sequential hydrodynamic injection. The injection bias in the first two electrokinetic injection modes was compared with the sequential hydrodynamic injection. Corrections in the bias of the electrokinetic injections were discussed, and an improved approach was suggested. Finally, the effect of the relative concentration of the multiply charged cation in the sample plug and running buffer on the peak shape of co-electroosmotic and counter-electroosmotic ions was examined, and found to be much more influential on the latter.     

Amperometric detection of unithiol complexes of heavy metals in high-performance liquid chromatography

It was demonstrated that Pb(II), Cd(II), Hg(II), Ni(II), Co(II), and Cu(II) can be indirectly determined as their unithiol complexes by amperometric detection under static and HPLC conditions. Factors affecting the Chromatographic separation and amperometric detection of metal complexes of unithiol were studied. Two designs of flow electrochemical cells (thin-layer and wall-jet cells) and three electrode materials (platinum, graphite, and glassy carbon) were compared. The best sensitivity was attained for an amperometric detector with wall-jet flow cell and a graphite indicator electrode. The detection limits for Hg(II), Pb(II), and Cd(II) were 0.9, 0.3, and 0.1 μg/mL, respectively. The Chromatographic determination of heavy metals in a sample of waste water was carried out using the amperometric detector