Surface-enhanced Raman scattering (SERS) from different azobenzene self-assembled monolayers and sandwiches

Self-assembled monolayers (SAMs) of functionalized azobenzene thiols (RAzoCnSH, n=3-6 for R=H, abbreviated as AzoCnSH; and n=4 for R=CH(3)CONH, abbreviated as aaAzoC4SH) on different substrates RAzoCnSz.sbnd;z.sfnc;S (S represents substrates of vacuum-deposited gold (Au), silver foil (Ag), HNO(3) etched silver foil (EAg), and silver mirror (mAg)) have been studied by SERS in the near-infrared region. SERS of the SAMs on EAg and/or mAg exhibit SERS effects that vary with etching time and/or deposition time. The most appropriate time is 5 s for etching in 1:1 HNO(3) and 40 s for deposition in 0.1 M Ag(NH(3))(2)NO(3). Further, a layer of Ag mirror was conveniently deposited on the top of the SAMs on different substrates, yielding a more efficient SERS-active system possessing a "sandwiched" structure of mAgz.sfnc;RAzoCnS-z.sfnc;S. An appropriate surface roughness is required for the strongest SERS effect. Scanning electron microscopy (SEM) indicates that there exist a large number of projects around 100 nm on the surface showing the strongest SERS effect. When the surface roughness is decreased or increased, the SERS effect decreases sharply. The relationship between the SERS effect and the structural nature was investigated and showed that the enhancement factor decays exponentially with increasing in distances of the azobenzene group from the underlying substrate or the overlying silver mirror. This result reveals that the SERS effect may be the result of the electromagnetic coupling effect between two metal layers.     

末端碳链长度对偶氮苯自组装膜结构的影响

The end-group dominated molecular orientation in the azobenzene self-assembled monolayers (SAMs), CnAzoC2SH (n=1-4), on gold was evaluated for the first time by grazing incidence reflection absorption FTIR spectroscopy (RA-FTIR). All these azobenzene SAMs have highly-organized and closely-parked structures, with the molecule tilting away gradually from surface normal direction with the increase of end group alkyl length.     

偶氮苯自组装单分子膜中长程电子转移机理

利用自组装技术在金电极表面构造了具有不同前端健长度偶氮苯功能化的单分子膜体系：Au／S（CH2）nNHCO-N＝N-OCH2CH3（n＝2，3，4，6）．研究结果表明，仍氮苯到金电极的表现电子转移速率随它们之间的距离长度的增加而呈指数性的下降趋势．基于Marcus电子隧穿理论，得到了此自组装膜体系的长程电子隧穿系数ρ＝（1．35±0．2）／CH2在和可逆电活性分子自组装膜体系及理论计算相比较的基础上，从偶氮苯分子自组装膜结构与电子转移过程的关系角度对这一结果进行了分析和说明．     

Electron transfer of quinone self-assembled monolayers on a gold electrode

Dialkyl disulfide-linked naphthoquinone, (NQ-C_n-S)₂, and anthraquinone, (AQ-C_n-S)₂, derivatives with different spacer alkyl chains (C_n: n = 2, 6, 12) were synthesized and these quinone derivatives were self-assembled on a gold electrode. The formation of self-assembled monolayers (SAMs) of these derivatives on a gold electrode was confirmed by infrared reflection-absorption spectroscopy (IR-RAS). Electron transfer between the derivatives and the gold electrode was studied by cyclic voltammetry. On the cyclic voltammogram a reversible redox reaction between quinone (Q) and hydroquinone (QH₂) was clearly observed under an aqueous condition. The formal potentials for NQ and AQ derivatives were −0.48 and −0.58 V, respectively, that did not depend on the spacer length. The oxidation and reduction peak currents were strongly dependent on the spacer alkyl chain length. The redox behavior of quinone derivatives depended on the pH condition of the buffer solution. The pH dependence was in agreement with a theoretical value of E_1/2 (mV) = E′ − 59pH for 2H⁺/2e⁻ process in the pH range 3–11. In the range higher than pH 11, the value was estimated with E_1/2 (mV) = E′ − 30pH , which may correspond to H⁺/2e⁻ process. The tunneling barrier coefficients (β) for NQ and AQ SAMs were determined to be 0.12 and 0.73 per methylene group (CH₂), respectively. Comparison of the structures and the alkyl chain length of quinones derivatives on these electron transfers on the electrode is made.     

Study on self-assembled monolayers of functionalized azobenzene thiols on gold: XPS,electrochemical properties,and surface-enhanced Raman spectroscopy

Self-assembled monolayers (SAMs) of 4-acetamino-4'-(4-mercaptobutoxy)azobenzene (CH3)CONH-ph-N=N-ph-O(CH2)(4)SH, abbr. aaAzoC4SH) and 4-mercaptobutoxy azobenzene (ph-N=N-ph-O(CH2)(4)SH, abbr. AzoC4SH) on a gold surface have been studied by X-ray photoelectron spectroscopy (XPS), FT Raman spectroscopy, and electrochemistry. A surface-enhanced Raman scattering (SERS)-active system with a "sandwiched" structure of Ag/R-Azo-C4S-/Au was conveniently obtained by the method of Tollen's test. The relationship between the SERS effect and the structural nature of the system indicates that the enhancement correlates to both the silver islands above and the gold substrate underneath. The redox behaviors of the self-assembly on gold electrodes showed that the SAMs of the two compounds exhibit well-behaved voltammetric responses in a Britton-Robinson buffer corresponding to the irreversible two-electron, two-proton reduction-oxidation of azobenzene. The apparent electron-transfer rate kinetics is very sluggish, and the rate constant k(app) of aaAzoC4SH/Au (1.34 x 10(-6) s(-1)) is lower than that of AzoC4SH/Au (1.63 x 10(-4) s(-1)), which may be attributed to the different spatial restriction of close-packing structures on the conformational change accompanied by electron and proton transfer in the SAMs.     

偶氮苯衍生物自组装单分子膜中的分子取响

利用反射红外光谱研究了金表面一系列具有不同碳链长度的偶氮苯巯基衍生物的自组装单分子膜.通过对比各向同性样品的透射谱和单分子膜的反射谱中各个吸收峰强度,定量地研究了分子中各部分的取向与分子结构的关系.我们分别提出了烷基链和偶氮基团取向计算的方法,利用该方法成功地求得了分子中各部分在膜的倾角.结果显示,当分子中烷基链长度增大时,碳链和偶氮苯基团相对于法线的倾斜逐渐加剧.这种倾角的变化归因于分子中碳链间范德华引力增大时,引起分子逐渐倾斜以达到最佳的范德华接触.同时研究发现,烷基链和偶氮基团受碳长度变化的影响并不相同.当分子中亚甲基数目增多时,烷基链的倾角迅速增大而偶氮苯倾角的增大则相对缓慢,这反映了它们在空间需求和本身刚性上的不同。     

新型偶氮苯硫醇衍生物自组装膜的制备与结构表征

Self Assembled Monolayers(SAMs) of a series of mercapto contained azobenzene derivatives with the structure of CnH2n+1AzoO(CH 2)mSH (where n =4,6,8,10,12; with m =3,5 respectively) were prepared and characterized. Wettability measurement of water on the SAMs demonstrates that molecular packing density in the monolayers increases while the alkyl chain in the molecules is lengthened. Both the n and m values have similar contribution to the wetting property of SAMs. The RA IR spectra reveal that the alkyl chains in the SAMs tilt away dramatically from the surface normal direction with the increase in their length. However, the orientation of azobenzene moiety is found to be influenced slightly by the alkyl chain length, which is due to the tenderness of the molecule.     

Intermolecular Interactions in Mixed Self‐Assembled Monolayers of Ferrocene

Electrochemical characterization of mixed self‐assembled monolayers (SAMs) of 6‐ferrocenyl‐1‐hexanethiol (FcH) and mercaptoundecanoic acid tyrosinamide (MUATyr) on gold is reported. Single‐component SAMs of FcH presented repulsive intermolecular interactions (vGθ_T=?1.12), while mixed SAMs of FcH/MUATyr (1 : 1) exhibited attractive interactions (vGθ_T=+0.20), with a homogeneous distribution of both components. Electrochemical kinetic determinations on mixed SAMs of FcH/MUATyr, indicated a secondary electron transfer pathway between the redox centers of both components. Higher amounts of FcH in the mixed SAMs lowered the observed rate of electron transfer of MUATyr. The oxidation of FcH caused an anodic shift of 160 mV in the voltammetric wave of MUATyr.     

新型偶氮苯硫醇衍生物自组装膜的制备与结构表征

自组装单分子膜(ＳＡＭｓ)是近年来引起广泛注意的一种稳定的、二维有序的、致密的有机超薄膜体系,由于其优越的性能,在润滑、吸附、防腐、电化学及微电子等领域中显示出广阔的应用前景[1～4].自组装单分子膜是使用含有各种活性官能团(如-ＣＯＯＨ,-ＳＨ,-Ｓ-Ｓ-,-ＯＨ,-ＣＮ等)的分子,以化学键的形式与相应的基底(如Ａｕ,Ａｇ,Ｃｕ,Ｐｔ,Ｓｉ,Ｍｉｃａ等)相互作用从而自发地形成自组装膜.根据不同的研究或应用目的合理设计组装分子的结构及基底表面,从而得到具有所需功能的自组装单分子膜是近年来界面科学和材料科学等领域研究的热点之一.…     

Influence of alkyl chain length on the structure of dialkyldithiophosphinic Acid self-assembled monolayers on gold

We report the formation and characterization of self-assembled monolayers (SAMs) based on dialkyldithiophosphinic acid adsorbates {[CH(3)(CH(2))(n)](2)P(S)SH (n = 5, 9, 11, 13, 15)} on gold substrates. SAMs were characterized using X-ray photoelectron spectroscopy, reflection-absorption infrared spectroscopy, contact angle measurements, and electrochemical impedance spectroscopy. Data show that there is a roughly 60:40 mixture of bidentate and monodentate adsorbates in each of these SAMs. The presence of monodentate adsorbates is due to the numerous and deep grain boundaries of the underlying gold substrate, which disrupt chelation. Comparing the characterization data of dialkyldithiophosphinic acid SAMs with those of analogous n-alkanethiolate SAMs shows that both SAMs follow a similar trend: The alkyl chains become increasingly organized and crystalline with increasing alkyl chain length. The alkyl groups of dialkyldithiophosphinic acid SAMs, however, are generally less densely packed than those of n-alkanethiolate SAMs. For short alkyl chains (hexyl, decyl, and dodecyl), the significantly lower packing densities cause the alkyl chains to be liquid-like and disorganized. Long-chain dialkyldithiophosphinic acid SAMs are only slightly less crystalline than analogous n-alkanethiolate SAMs.     

Electrochemical characteristics of thin nickel hexacyanoferrate films formed on gold and thiol self-assembled monolayers modified gold electrodes.

Nickel hexacyanoferrate (NiHCF) film was prepared and characterized on gold and thiol self-assembled monolayers (SAMs)-modified gold electrodes. It was found that the film exhibited some different electrochemical characteristics compared with that found on a carbon electrode. In the presence of K+, the film exhibited a redox peak at about 0.5 V. The peak potential shifted linearly with the K+ concentration over the range of about 0.1 mM - 0.1 M with slopes of 54 - 60 mV per log[K+]. However, in solutions containing Na+, Li+ or NH4+ ion the film did not generate well-defined peaks, or even a visible redox peak. Therefore, the film showed a selective potential response to K+. The voltammetric behavior of NiHCF film varied with thiols, the preparation procedure and the solution pH. Under certain conditions, the characteristics of the film could be improved to some extent.     

偶氮苯衍生物自组装膜的表征及组装动力学

报导了4-正辛基-4′-（3－巯基丙氧基）偶氮苯（简称C8AzoC3）自组装膜（Self-AssembledMonolnyersSAMs）的表征及其自组装成膜动力学，接触角滴定、原子力显微镜（AFM）及电化学的实验结果表明，C8AzoC3分子在金表面自组装形成致密有序的流水性单分子膜，并且在电极上没有明显的电化学响应．通过控制组装时间，考察了偶氮苯自组装形成单分子膜的动力学过程，从接触角和电化学数据得到组装过程的速率常数kad为（1.2±0.2）×103mol-1·dm3·s－1；依据不同组装时间形成的自组装膜的特征循环伏安行为，提出了C8AzoC3分子在金表面自组装过程的动态模型．     

Heterogeneous electron-transfer kinetics for PQQ covalently attached to aminoalkanethiol monolayers on gold

Pyrroloquinoline quinone (PQQ) was covalently attached to a gold electrode surface via the self-assembled monolayers of aminoalkanethiols (NH2)(CH2)nSH) with different alkyl chain lengths (n=2, 6, 8, and 11). The voltammetric behaviors of PQQ-SAMs both at full and at partial monolayers were examined. It was found that the redox response of PQQ became more reversible with increasing dilution by alkanethiols owing to the less lateral interaction between PQQ heads. Voltammograms were transformed from quasi-reversibility to irreversibility as the alkyl chain spacer became longer. The electron tunneling barrier constant (beta) and distance dependence of the long range electron-transfer parameters have been studied in acidic solution using cyclic voltammetry. A logarithmic dependence of the heterogeneous electron-transfer rate constant on the alkyl chain length was found for full and partial PQQ monolayers. The beta value was close to 1.0 per CH2 unit regardless of dilution effect.     

Electron transport through a self-assembled monolayer of thiol-end-functionalized tetraphenylporphines and metal tetraphenylporphines

The monolayers of several thiol-end-functionalized tetraphenylphophines (SH-TPP) and metal tetraphenylporphines (SH-MTPP) were self-assembled on gold surfaces and identified by cyclic voltammetry (CV), electrochemical impedance spectroscopy, scanning electrochemical microscopy, and the contact angle. The CV peaks of the [Fe(CN)6]3-/ [Fe(CN)6]4- couple were used to identify the efficiency of electrons transferring through the self-assembled monolayer (SAM). The results suggested that SH-TPP and SH-MTPP could form high-quality SAMs on gold surfaces. The SAMs blocked electron transport from the gold electrode to solution. When the length of the thiol-end-link spacer (alkyl group) increased, the electron transport ability of the SAM decreased because of the increased insulator properties of the alkyl chain. With the insertion of metallic ions, the electron transport ability of the SAM of SH-MTPP increased compared to that of the SAM of SH-TPP, which was probably due to the fact that (i) the insertion of metallic ions changed the molecular structure and the molecular structure of SH-MTPP played an important role in electron transport through the SAM and (ii) the insertion of metallic ions increased the electron tunneling probability through the monolayer.     

Voltammetry and in situ scanning tunnelling spectroscopy of osmium, iron, and ruthenium complexes of 2,2':6',2'-terpyridine covalently linked to Au(111)-electrodes

We have studied self-assembled molecular monolayers (SAMs) of complexes between Os(II)/(III), Fe(II)/(III), and Ru(II)/(III) and a 2,2',6',2'-terpyridine (terpy) derivative linked to Au(111)-electrode surfaces via a 6-acetylthiohexyloxy substituent at the 4'-position of terpy. The complexes were prepared in situ by first linking the terpy ligand to the surface via the S-atom, followed by addition of suitable metal compounds. The metal-terpy SAMs were studied by cyclic voltammetry (CV), and in situ scanning tunnelling microscopy with full electrochemical potential control of substrate and tip (in situ STM). Sharp CV peaks were observed for the Os- and Fe complexes, with interfacial electrochemical electron transfer rate constants of 6-50 s(-1). Well-defined but significantly broader peaks (up to 300 mV) were observed for the Ru-complex. Addition of 2,2'-bipyridine (bipy) towards completion of the metal coordination spheres induced voltammetric sharpening. In situ STM images of single molecular scale strong structural features were observed for the osmium and iron complexes. As expected from the voltammetric patterns, the surface coverage was by far the highest for the Ru-complex which was therefore selected for scanning tunnelling spectroscopy. These correlations displayed a strong peak around the equilibrium potential with systematic shifts with increasing bias voltage, as expected for a sequential two-step in situ ET mechanism.     

Preparation and Characterization of a Lignin Modified Electrode

Alkali lignin undergoes strong adsorption on polycrystalline gold electrodes. Subsequent oxidation in a sulfuric acid solution leads to a restructured redox‐active polymer that shows features characteristic for surface confined species. Surface coverage of up to 4.40×10^?10 mol cm^?2 may be obtained depending on the adsorption time or lignin concentration in the adsorption solution. Using Laviron's approach the electron‐transfer rate constant and the transfer coefficient were found to be 8.9 s^?1 and 0.35, respectively. The formal potential of the redox couple shifted negatively with pH at a rate of ca. 60 mV/pH unit, suggesting a 2 e/2 H⁺ reaction. The redox couple was also found to be a good mediator for electrochemical ascorbic acid oxidation in neutral phosphate buffer with ca. 250 mV reduction of the oxidation overpotential.     

New crown annelated tetrathiafulvalenes: synthesis, electrochemistry, self-assembly of thiol derivatives, and metal cation recognition

The synthesis of new S(2)O(4)-crown annelated tetrathiafulvalene (TTF) derivatives substituted with one terminal thiol group is described. Self-assembled monolayers (SAMs) of these compounds have been assembled on gold and platinum surfaces, the latter substrate giving improved quality films. SAMs of TTF derivative 16b are the most stable of those we have studied. Electrochemical data for SAMs of 5a, 5b, 8, 16a, and 16b in acetonitrile reveal two reversible one-electron waves, typical of the TTF system; the current increased linearly with scan rate, indicating a surface wave response. SAMs of 8, 16a, and 16b exhibited an electrochemical response in aqueous electrolytes, which was observed between 50 and 100 cycles. Moreover, if the potential scanned was limited to the first TTF oxidation, the cyclic voltammetry response was observed for at least 1000 cycles. Metal complexation by the crown ionophore of the SAMs in acetonitrile has been monitored by a positive shift in the first oxidation potential of the TTF unit (maximum DeltaE(1)(1/2) = 80 mV for Ag(+)). We also report the X-ray crystal structure of TTF-crown derivative 21 bearing two hydroxymethyl substituents, synthesized during the course of this work. The structure is characterized by infinite chains of molecules linked by strong intrachain hydrogen bonds between the terminal hydroxy groups.     

Electrochemical release of amine molecules from carbamate-based, electroactive self-assembled monolayers

In this paper, carbamate-based self-assembled monolayers (SAMs) of alkanethiolates on gold were suggested as a versatile platform for release of amine-bearing molecules in response to the electrical signal. The designed SAMs underwent the electrochemical oxidation on the gold surface with simultaneous release of the amine molecules. The synthesis of the thiol compounds was achieved by coupling isocyanate-containing compounds with hydroquinone. The electroactive thiol was mixed with 11-mercaptoundecanol [HS(CH(2))(11)OH] to form a mixed monolayer, and cyclic votammetry was used for the characterization of the release behaviors. The mixed SAMs showed a first oxidation peak at +540 mV (versus Ag/AgCl reference electrode), indicating the irreversible conversion from carbamate to hydroquinone groups with simultaneous release of the amine molecules. The analysis of ToF-SIMS further indicated that the electrochemical reaction on the gold surface successfully released amine molecules.     

Self-assembled monolayers of alkanethiols on gold prepared in a hexagonal lyotropic liquid crystalline phase of Triton X-100/water system

In this paper, we have reported a new method of preparing self-assembled monolayers (SAMs) of decanethiol and hexadecanethiol on gold surface by using a lyotropic liquid crystalline phase as an adsorbing medium. The stability and blocking ability of these SAMs were characterized using grazing angle Fourier transform infrared (FTIR) spectroscopy and electrochemical techniques such as cyclic voltammetry and electrochemical impedance spectroscopy. The lyotropic liquid crystalline medium possesses a hexagonal structure consisting of a nonionic surfactant Triton X-100, water, and the corresponding thiol, which provides a highly hydrophobic environment to solubilize the alkanethiols and later to facilitate their delivery to the gold surface. We find that the SAMs formed from the hexagonal liquid crystalline phase are highly compact and have excellent electrochemical blocking ability towards the redox probes compared to conventional SAMs prepared from commonly used organic solvents such as ethanol. From the impedance studies, we have determined the capacitance of the monolayer-coated electrodes and the surface coverage of the SAM, which has been found to be >99.98% on gold surface. We have also estimated the extent of ionic permeability through the film and measured the rate constants for the redox reactions on the SAM-modified electrodes. Our results show that the rate constants of [Fe(CN)6](3-/4-) and [Ru(NH3)6](2+/3+) redox couples are very much lower in the case of monolayers prepared in liquid crystalline phase compared to the SAM formed in 1 mM thiol in ethanol solution, suggesting a better blocking ability of the SAMs in the former case. From the grazing angle FTIR spectroscopic studies and capacitance measurements, we have ruled out any coadsorption of surfactant molecules on the Au surface. These results suggest that SAMs of very low defect density and extremely low ionic permeability can be obtained when a hexagonal lyotropic liquid crystalline phase is used as an adsorbing medium.     

Self‐Assembled Monolayers of Cobalt and Iron Phthalocyanine Complexes on Gold Electrodes: Comparative Surface Electrochemistry and Electrocatalytic Interaction with Thiols and Thiocyanate

The self‐assembling of the octa(hydroxyethylthio)‐metallophthalocyanine {MOHETPc (M=Co and Fe)} complexes and their similar analogues, octabutylthiometallophthalocyanine {MOBTPc (M=Co and Fe)} complexes on gold electrodes are investigated. Comparative surface voltammetric insights into their distinct self‐assembling properties with respect to the passivation of Faradaic processes and surface coverages, including their solution electrochemistry, suggest different orientations and non‐cleavage of their C? S bonds. In the pH 2?9 range, the reversible [M^(III)Pc(?2)]⁺ / [M^(II)Pc(?2)] redox couples show potential shifts close to ?59 mV / pH. The gold electrodes modified with the SAMs of these species show electrocatalytic activity towards the oxidation of thiols (L ‐cysteine, homocysteine and penicillamine) and thiocyanate in acidic media with detection limits in the region of 10^?7–10^?6 mol dm^?3. These monolayers are stable and easily reproducible.