全矢量有限元模型及其在光波导中的应用

为了研究光波导和光子晶体光纤的模式特性和传输特性,从矢量波动方程出发,推导出了各向异性介质中场微分方程复数泛函表达式,利用棱边/节点混合元离散了该泛函,加入了各向异性介质匹配层边界条件,得到关于传播常量的广义特征值方程.以矩形波导为例,对各向异性介质匹配层边界条件的吸收特性进行了研究,得到了基模以及几个高阶模的场分布、色散曲线和损耗曲线.结果表明该方法可靠有效.对正六边形晶格光子晶体光纤进行了分析.数据表明：光纤有效折射率随空气孔直径或波长的增大而减小,但与空气孔圈数无关;光纤限制损耗(confinement loss)随波长增大近似成指数增大,而增加空气孔直径或者空气孔圈数则可使之显著降低.     

Numerical characterization of nanopillar photonic crystal waveguides and directional couplers

We numerically characterize a novel type of a photonic crystal waveguide, which consists of several rows of periodically arranged dielectric cylinders. In such a nanopillar photonic crystal waveguide, light confinement is due to the total internal reflection. A nanopillar waveguide is a multimode waveguide, where the number of modes is equal to the number of rows building the waveguide. The strong coupling between individual waveguides leads to the proposal of an ultrashort directional coupler based on nanopillar waveguides. We present a systematic analysis of the dispersion and transmission efficiency of nanopillar photonic crystal waveguides and directional couplers. Plane wave expansion and finite difference time domain methods were used to characterize numerically nanopillar photonic crystal structures both in two- and three-dimensional spaces.     

Silicon-based two-dimensional photonic crystal waveguides

A review of the properties of silicon-based two-dimensional (2D) photonic crystals is given, essentially infinite 2D photonic crystals made from macroporous silicon and photonic crystal slabs based on silicon-on-insulator basis. We discuss the bulk photonic crystal properties with particular attention to the light cone and its impact on the band structure. The application for wave guiding is discussed for both material systems, and compared to classical waveguides based on index-guiding. Losses of resonant waveguide modes above the light line are discussed in detail.     

Influences of supercell termination and lateral row number on the determination of slow light properties of photonic crystal waveguides

We systematically analyze the effects of the use of an inaccurate supercell termination and an insufficient supercell size of plane-wave expansion method on the dispersion and the slow light properties of the photonic crystal waveguides. The inattentive use of supercells of photonic crystal waveguides appeared in the literature is found to be yielding errors in the dispersion and slow light characteristics of the fundamental guided mode of photonic crystal waveguides. In addition, extra modes appear in the photonic band gap of the photonic crystal waveguide due to inaccurate supercell termination. By examining the field distribution of the modes, the extra modes can be determined and removed from the band diagram. The dispersion, group index and bandwidth characteristics are observed to be less affecting from inaccurate supercell termination as the number of rows adjacent to the waveguide increases. Moreover, the dispersion and the group index-frequency curves of the fundamental guided mode of correctly terminated supercells are found to be converging as the lateral row number along the line-defect is increased.     

Experimental evidence of photonic crystal waveguides with wide bandwidth in two-dimensional Al_2O_3 rods array

A cross-shaped photonic crystal waveguide formed by a square lattice Al_2O_3 rods array is numerically and experimentally investigated. The band gap of the TE mode for the photonic crystals and transmission characteristics of waveguides are calculated by the plane wave expansion method and the finite element method.We perform the experiments in the microwave regime to validate the numerical results. The measured reflection and transmission characteristics of the photonic crystals show a large band gap between 8.62 and 11.554 GHz(relative bandwidth is 29.34%). The electromagnetic waves are transmitted stably in the waveguides, and the transmission characteristics maintain a high level in the band gap.     

Waveguide circuits in three-dimensional photonic crystals

Waveguide circuits in three-dimensional photonic crystals with complete photonic band gaps are simulated with finite difference time domain (FDTD) simulations, and compared with measurements on microwave scale photonic crystals. The transmission through waveguide bends critically depends on the photonic crystal architecture in the bend region. We have found experimentally and theoretically, a new waveguide bend configuration consisting of overlapping rods in the bend region, that performs better than the simple waveguide bend of terminated rods, especially in the higher frequency portion of the band. Efficient beam splitters with this junction geometry are also simulated.     

Intrinsic localized modes in photonic crystal circuits

A discussion of intrinsic localized modes (ILMs) in photonic crystals is given. Emphasis is placed on ILMs in photonic crystal waveguides formed from Kerr nonlinear materials and photonic crystal circuits formed by joining nonlinear photonic crystal waveguides into networks. Work on stationary and propagating ILMs in nonlinear waveguides and waveguide junctions is reviewed. In addition, some discussion is given on the optical bistability of the barrier and junction geometries and on recent results on two-dimensional ILMs in Kerr nonlinear photonic crystals.     

Numerical studies of 2D photonic crystals: Waveguides,coupling between waveguides and filters

In photonic crystals, light propagation is forbidden in a certain wavelength range, the bandgap. In a two-dimensional crystal composed of parallel high-refractive index rods in a low-index background a line defect can be formed by removing a row of these rods, which can act as a waveguide for frequencies in the bandgap of the crystal. In order to get more insight into the main features of such waveguides we have studied a number of properties, using simulation tools based on the finite difference time domain method and a finite element Helmholtz solver. We show conceptually simple methods for determining the bandgap of the crystal as well as the dispersion of a waveguide for wavelengths in this bandgap. For practical applications, it is also important to know how much light can be coupled into the waveguide. Therefore, the coupling of light from a dielectric slab waveguide into the photonic crystal waveguide has been examined, showing that a coupling efficiency of up to 83% can be obtained between a silicon oxide slab and a waveguide in a crystal of silicon rods. Finally, calculations on an ultra-compact filter based on reflectively terminated side-branches of waveguides (similar to tuned stubs in microwave engineering) are shown and discussed.     

Adiabatic coupling between conventional dielectric waveguides and waveguides with discrete translational symmetry

We study adiabatic transformation in optical waveguides with discrete translational symmetry. We calculate the reflection and transmission coefficient for a structure consisting of a slab waveguide that is adiabatically transformed into a photonic crystal waveguide and then back into a slab waveguide. The calculation yields high transmission over a wide frequency range of the photonic crystal waveguide band and indicates efficient coupling between the slab waveguide and the photonic crystal waveguide. Other applications of adiabatic mode transformation in photonic crystal waveguides and the coupled-resonator optical waveguides are also discussed.     

光子晶体光纤的弯曲损耗振荡特性分析

综合运用弯曲光纤的等效直光纤模型、全矢量频域有限差分法及各向异性完全匹配层吸收边界,计算了两种类型(折射率引导型和带隙型)光子晶体光纤(PCF)的弯曲损耗.通过数值模拟弯曲损耗随弯曲半径的变化关系,证实了两种光子晶体光纤均具有弯曲损耗振荡特性.进而分析了两种光子晶体光纤弯曲损耗振荡的产生机理并给出了与损耗峰对应的包层模式.结果表明,振荡的产生源于基模与包层模式的耦合,其中,折射率引导型光子晶体光纤的弯曲损耗振荡机理类似于传统双包层光纤,带隙型光子晶体光纤弯曲损耗振荡的产生则是两种不同类型的包层模式共同作用的结果.     

光控液晶光子晶体微腔全光开关

设计了一种缺陷模迁移光子晶体微腔全光开关. 两条二维三角晶格空气孔光子晶体波导由一个光子晶体微腔连接, 在微腔的点缺陷中填充掺有少量偶氮聚合物的苯乙炔类液晶. 通过调节控制光的偏振态, 使偶氮聚合物发生顺-反异构化反应, 带动液晶分子重新取向, 从而改变光子晶体微腔的谐振波长, 进而实现光的通过与截止. 运用时域有限差分法和平面波展开法分析 了二维光控液晶光子晶体微腔全光开关的光学特性. 数值计算结果表明: 对于1.55 μ通信波段通过外界偏振光控制所填充的向列相液晶 的折射率可以实现对光波的导通与截止. 分析结果显示, 此开关具有阈值低, 消光比较大, 体积小等优点. 关键词： 二维光子晶体微腔 波导 时域有限差分(FDTD) 液晶     

Anomalous propagation loss in photonic crystal waveguides

Propagation loss can occur in photonic crystal waveguides without complete optical confinement. We employ a highly efficient transfer-matrix method which allows for accurate and reliable extraction of the propagation loss even at an extremely low level. The results for a two-dimensional photonic crystal waveguide shows that the loss exponentially decays via the waveguide wall thickness. An anomalous phenomenon is found where the loss for guided modes near the upper band gap edge can be several orders of magnitude smaller than that for modes in the middle of the band gap. This anomaly can be well explained by the localization degree of guided modes at different frequency domains.     

二维正方晶格光子晶体禁带特性

基于平面波展开法,以碳化硅构成二维正方晶格光子晶体,数值模拟了TE模、TM模二维光子晶体的禁带特性,结果表明,TE模更容易形成光子禁带。同时设计了以碳化硅构成二维正方晶格光子晶体波导,数值模拟了TE模、TM模波导的传输特性和禁带特性,结果表明,TE模构成的波导电磁波能够较好的传播,它们的光子禁带都没有出现。研究结论为光子晶体波导器件的开发提供参考。     

光子晶体光纤及在光纤光栅中的应用

从光子晶体光纤(PCF)与普通光纤在光纤结构上的差异出发，简要分析PCF的导光原理与单模特性，并探讨基于PCF的光纤光栅的稳定性，基于聚合物填充多孔光纤的长周期光纤光栅的温度调谐性能，以及纯结构性非光敏纤芯长周期光子晶体光纤光栅的原理。从一个方面说明了光子晶体光纤的潜在应用。     

Compact and broadband waveguide taper based on partial bandgap photonic crystals

Partial bandgap characteristics of parallelogram lattice photonic crystals are proposed to suppress the radiation modes in a compact dielectric waveguide taper so as to obtain high transmittance in a large wavelength range. Band structure of the photonic crystals shows that there exists a partial bandgap, The photonie crystals with partial bandgap are then used as the cladding of a waveguide taper to reduce the radiation loss efficiently. In comparison with the conventional dielectric taper and the complete bandgap photonic crystal taper, the partial bandgap photonic crystal taper has a high transmittance of above 85% with a wide band of 170 nm.     

Dual-frequency division de-multiplexer based on cascaded photonic crystal waveguides

A dual-frequency division de-multiplexing mechanism is demonstrated using cascaded photonic crystal waveguides with unequal waveguide widths. The de-multiplexing mechanism is based on the frequency shift of the waveguide bands for the unequal widths of the photonic crystal waveguides. The modulation in the waveguide bands is used for providing frequency selectivity to the system. The slow light regime of the waveguide bands is utilized for extracting the desired frequency bands from a wider photonic crystal waveguide that has a relatively larger group velocity than the main waveguide for the de-multiplexed frequencies. In other words, the wider spatial distribution of the electric fields in the transverse direction of the waveguide for slow light modes is utilized in order to achieve the dropping of the modes to the output channels. The spectral and spatial de-multiplexing features are numerically verified. It can be stated that the presented mechanism can be used to de-multiplex more than two frequency intervals by cascading new photonic crystal waveguides with properly selected widths.     

Extrinsic optical scattering loss in photonic crystal waveguides: role of fabrication disorder and photon group velocity

Formulas are presented that provide clear physical insight into the phenomenon of extrinsic optical scattering loss in photonic crystal waveguides due to random fabrication imperfections such as surface roughness and disorder. Using a photon Green-function-tensor formalism, we derive explicit expressions for the backscattered and total transmission losses. Detailed calculations for planar photonic crystals yield extrinsic loss values in overall agreement with experimental measurements, including the full dispersion characteristics. We also report that loss in photonic crystal waveguides scales inversely with group velocity, at least, thereby raising serious questions about future low-loss applications based on operating frequencies that approach the photonic band edge.     

Beaming of light and enhanced transmission via surface modes of photonic crystals

We report beaming and enhanced transmission of electromagnetic waves by use of surface corrugated photonic crystals. The modes of a finite-size photonic crystal composed of dielectric rods in free space have been analyzed by the plane-wave expansion method. We show the existence of surface propagating modes when the surface of the finite-size photonic crystal is corrugated. We theoretically and experimentally demonstrate that the transmission through photonic crystal waveguides can be substantially increased by the existence of surface propagating modes at the input surface. In addition, the power emitted from the photonic crystal waveguide is confined to a narrow angular region when an appropriate surface corrugation is added to the output surface of the photonic crystal.     

Multimodal and birefringence effects in magnetic photonic crystals

Photon trapping in magnetic photonic crystals leads to an enhanced Faraday rotation by increasing the optical path-length of the transmitted beam. The integration of these structures into on-chip photonic circuits, while advantageous from the point of view of component connectivity in multifunctional systems, faces several challenges. Photonic waveguide structures in magnetic films may support more than one mode depending on the waveguide thickness and refractive index. Differences in effective refractive indices between TE and TM modes engender phase disparities, thus hindering the Faraday response of the material. The effects of birefringence and multimodality on the performance of waveguide magnetic photonic crystals in magnetic garnets are addressed in paper. In particular, Faraday rotation enhancement in magnetophotonic crystals in the presence of waveguide birefringence and modal multiplicity on the photonic bandgap spectral response are discussed. Multiple stopbands and significant polarization rotation are observed in multimode Bi-substituted iron garnet film waveguides with single-defect photonic crystal structures. The photonic crystals for this study are patterned on ridge waveguide films by focused-ion-beam (FIB) milling.     

Anti-resonant reflecting photonic crystal waveguide (ARRPCW): modeling and design

In this paper, we apply an antiresonant reflecting layer concept in photonic crystal based waveguides. We have proposed a thin core ARRPCW with linear waveguide carved in it and hence calculated the transmission spectra for various length of waveguide and have shown that the longer waveguides in ARRPCW yields transmission with significantly high quality factor. Comparison of the transmission characteristics of normal conventional planar ARROW-B waveguides & ARRPCW has also been reported. The 2D FDTD numerical modeling reveals improved transmission for various lengths of planar ARROW and ARRPCW with low losses in long waveguides. Transmittance and quality factor are also calculated to confirm superior performance of the proposed design of ARROW based photonic crystal waveguide.