New substituted thieno[3,2-c]pyridine derivatives 5 were synthesized by the reaction of 3-bromo-4-chlorothieno[3,2-c]pyridine 1 with cyclic amine 2, which further on Suzuki reaction with boronic acids 4 converted to corresponding 3-arylthieno[3,2-c]pyridine 5. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines.
Graphical Abstract New thieno[3,2-c]pyridine derivatives were synthesized from 3-bromo-4-chlorothieno[3,2-c]pyridine and cyclic amines, which by on Suzuki reaction with boronic acids converted to corresponding 3-arylthieno[3,2-c]pyridine. Substituent R3 has predominant effect on fluorescence properties of thienopyridines. However, the electron donor amine at C4 has no effect on fluorescence properties of thienopyridines
The solvatochromic 9-hydroxybenzo[b]quinolizinium ion is shown to operate as fluorescent probe for the detection of water in acetonitrile. The dual fluorescence of this photoacid and its dependence on the content of water in the medium enable the ratiometric analysis of the fluorescence data.
An increasingly wide variety of fluorescent compounds is used in biotechnology, genomics, immunoassays, array technologies, imaging, and drug discovery. Therefore, synthesis of fluorophores with novel structural features can be interesting and useful in various fields. In this paper, four new fluorescent heterocyclic compounds with high quantum yields are introduced. These new fluorophores are synthesized in moderate to high yields via regioselective nitration of 3-alkyl-8-(4-chlorophenyl)-3 H-imidazo[4′,5′:3,4]benzo[c]isoxazoles. The latter compounds are obtained from the reaction of 1-alkyl-5-nitro-1 H-benzoimidazoles with (4-chlorophenyl)acetonitrile in basic MeOH solution. Physical spectral (UV-vis, IR, 1HNMR, 13C NMR, NOESY and fluorescence) and analytical data have established the structures of synthesized compounds. The fluorescence properties of new fluorescent heterocyclic compounds are studied. The fluorescence of all compounds is very intense and fluorescence quantum yields are high (> 0.52). Density functional theory (DFT) calculations are performed to provide the optimized geometries, relevant frontier orbitals and the prediction of 1H NMR chemical shifts for confirming the exact structure of fluorescent compounds. Calculated electronic absorption spectra were also obtained by time-dependent density functional theory (TD-DFT) method.
In this study, the synthesis of 7-((Hydroxyimino)methyl)-1,10-phenanthroline-4-carbaldehyde oxime (1) in two steps starting from 4,7-dimethyl-1,10-phenanthroline (2) is reported. It is found that compound 1 can be used as a fluorogenic probe for the detection of hypochlorite ion in aqueous solution. NMR and mass spectral analysis indicate that probe 1 undergoes a chemical transformation through its oxime units upon treatment with hypochlorite, which results in a remarkable enhancement of the emission intensity. Also, metal ion recognition properties of probe 1 is investigated. It is noted that compound 1 is responsive to Zn2+, Cd2+, Ni2+ and Cu2+ metal ions, which reduced the emission intensity under identical conditions.
Graphical Abstract The design, synthesis and properties of a new fluorescent hypochlorite probe is described. It is found that probe 1 immediately undergoes an oxidation reaction with NaClO through its oxime units in 0.1 M Na2CO3-NaHCO3 buffer containing DMF (pH = 9.0, 30:1 v/v) at room temperature, which resulted in a remarkable enhancement of the emission intensity. It is noteworthy that this novel probe 1 is highly selective to hypochlorite ion when compared to some other ROS and anions. On the other hand, probe 1 also induces turn-off fluorogenic responses to metal ions such as Zn2+, Cd2+, Ni2+ and Cu2+ ions under identical conditions.
The propensity of native state to form aggregated and fibrillar assemblies is a hallmark of amyloidosis. Our study was focused at analyzing the aggregation and fibrillation tendency of cytochrome c in presence of an organic solvent i.e. acetonitrile. In vitro analysis revealed that the interaction of cytochrome c with acetonitrile facilitated the oligomerization of cytochrome c via the passage through an intermediate state which was obtained at 20 % v/v concentration of acetonitrile featured by a sharp hike in the ANS fluorescence intensity with a blue shift of 20 nm compared to the native state. Oligomers and fibrils were formed at 40 and 50 % v/v concentration respectively as indicated by a significant hike in the ThT fluorescence intensity, red shift of 55 nm in congo red binding assay and an increase in absorbance at 350 nm. They possess β-sheet structure as evident from appearance of peak at 217 nm. Finally, authenticity of oligomeric and fibrillar species was confirmed by TEM imaging which revealed bead like aggregates and a meshwork of thread like fibrils respectively. It could be suggested that the fibrillation of bovine cytchrome c could serve as a model protein to unravel the general aggregation and fibrillation pattern of heme proteins.
The aqueous suspension of fluorescent nanoparticles were prepared by using 9-anthradehdye derivative (AH). The nanoparticles (AHNPs) were characterized using DLS-zeta sizer and SEM techniques. The photo physical properties of nanoparticles and precursor were measured and compared using UV-absorption spectroscopy, fluorescence spectroscopy and fluorescence lifetime studies. The significant overlap between fluorescence spectrum of AHNPs and excitation spectrum of Riboflavin (RF) led us to explore Fluorescence Resonance Energy Transfer (FRET) studies between AHNPs and RF in aqueous medium. The mechanism of FRET from AHNPs to RF discussed on spectral observations, thermodynamic parameters and changes produces in fluorescence lifetime in absence and presence of different concentrations of RF to AHNPs. The limit of detection for RF (0.071 µM) is considerably low compared with reported methods. Thus, we explore AHNPs as novel nano probe for quantitative determination of RF in pharmaceutical samples based on FRET study. In addition with this, AHNPs has excellent antibacterial activity than the bulk material for two different bacteria culture viz. E. coli and Bacillus sps.
Graphical Abstract 9-anthradehdye based fluorescent nanoparticles (AHNPs) explores as nano probe to detect Riboflavin (RF) in aqueous medium based on Fluorescence Resonance Energy Transfer (FRET) studies. The proposed analytical method successfully applied for quantitative determination of RF in pharmaceutical samples. In addition, with this, AHNPs has excellent antibacterial activity than the bulk material for two different bacteria culture suspension viz. E. coli and Bacillus sps.
Selective fluorescence turn on Zn2+ sensor with long-wavelength emission and a large Stokes shift is highly desirable in Zn2+ sensing area. We reported herein the synthesis and Zn2+ recognition properties of a new thiosemicarbazone-based fluorescent sensor L. L displays high selectivity and sensitivity toward Zn2+ over other metal ions in DMSO-H2O (1:1, v/v, HEPES 10 mM, pH = 7.4) solution with a long-wavelength emission at 572 nm and a large Stokes shift of 222 nm. Confocal fluorescence microscopy experiments demonstrate that L is cell-permeable and capable of monitoring intracellular Zn2+.
Graphical Abstract We report a new thiosemicarbazone-based fluorescent sensor (L) for selective recognition of Zn2+ with a long wavelength emission and a large Stokes shift.
Nanocomposites with thermo and photo-switchable fluorescent properties were synthesized via mini-emulsion polymerization based on spiropyran and methyl methacrylate monomer. The photophysical behavior of fluorescence nanocomposites was investigated by fluorescence spectrophotometry in different temperature, UV-light and time of exposure. It was found that methyl methacrylate polymer is capable of acting as a protective layer and play a critical role in improving the photostability of colorants. The nanocomposites exhibited excellent fluorescent thermo-switching action with respect to the free spiro molecule.
Our present investigation aims at the synthesis and application of new, symmetric bridged bis-pyrazolone based acid dyes. The bis-pyrazolone compounds were accomplished from bis- hydrazine of 4,4′-Diaminostilbene-2,2′-disulfonic acid and ethyl acetoacetate. The bis-pyrazolones have been coupled with diazonium salts of o-hydroxyl aromatic amines which resulted in ligand dyes. The intermediate ligand dyes were treated with 3d transition metals to achieve the targeted metal complex acid dyes. The structures of investigated compounds were confirmed with the help of spectroscopic techniques. Dyes were applied on leather and their application parameters including their light fastness, wash fastness and rubbing fastness were determined.
Hexadentate ligand L and its Ln3+ complexes EuLCl3 (1), TbLCl3 (2), SmLCl3 (3) are synthesised. All these complexes are well characterized for their photophysical properties such as luminescence lifetime decay(τ) and overall quantum yield(Φ). These complexes being water soluble, depicts their intense metal centred luminescence. Effect of pH on these complexes suggest that their emission intensities are stable in the pH range 4–9 and show their compatibility to function in the physiological pH.
In this paper, we report on the results of spectrofluorimetric study of new fluorescent sensor based on [Zn2L2] doped in ethyl cellulose. The sensor optical signal is based on the rapid fluorescence quenching in the presence of acetone vapor. The acetone vapor detection limit in a gas mixture by means of sensor based on [Zn2L2] doped in ethyl cellulose is 1.68 ppb. Being highly sensitive to the acetone acetone presence, instant in response and easy to use, the sensor can find an application for the noninvasive diagnostics of diabetes as well as for the monitoring of the content of acetone acetone in the air at industrial and laboratory facilities.
A bis(naphthalimide-piperazine) derivative (1) was synthesized as a pH-sensitive Off-On fluorescent probe. Operation mechanism of 1 is based on photo-induced electron transfer (PET) and its pH-dependent optical changes were investigated by using absorption and fluorescence spectroscopy. In the pH range of 11–4.5, this probe undergoes PET process from the piperazine to the naphthalimide moiety, leading to a fluorescence quenching. However, in the pH range of 4.5–1, the PET is inhibited to give a fluorescence enhancement. Moreover, the fluorescence ‘turn-on’ response of 1 is highly selective for protons (H+) over other metal cations, biomolecules and it shows a good reversibility between acidic and basic conditions.
Novel water-soluble anionic p-tert-butylthiacalix[4]arene with propanesulfonate fragments has been synthesized. Alkylation of the lower rim of thiacalix[4]arene in the presence of NaH/THF led to cone conformation instead of the expected 1,3-alternate conformer due to metal template effect. The presence of supramolecular associates at the critical micelle concentration of 1.65 · 10?5 M were investigated in aqueous solutions by a combination of different techniques (DLS and conductivity). It was observed that the macrocyclic platform decreases the CMC by tenfold as compared with non-macrocycle analogs. A simple approach for the design of stable monodisperse Ag-based nanoaggregates (near 95 nm) containing ionic Ag and organic ligand–thiacalix[4]arene sulfo derivative in water has been developed. Self-assembled fractal hybrid nanodendrites consisting of water-soluble anionic (thia)calix[4]arenes and Ag+ have been obtained in a single step under mild conditions.
Metal nanoparticles have been combined with magnet metal–organic frameworks (MOFs) to afford new materials that demonstrate an efficient catalytic degradation, high stability, and excellent reusability in areas of catalysis because of their exceptionally high surface areas and structural diversity. Magnetic MxOy@N-C (M = Fe, Co, Mn) nanocrystals were formed on nitrogen-doped carbon surface by using 8-hydroxyquinoline as a C/N precursor. The Co@N-C, MnO@N-C, and Fe/Fe2O3@N-C catalysts were characterized by X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), N2 adsorption/desorption, and X-ray photoelectron spectroscopy (XPS). The catalytic performances of catalysts were thoroughly investigated in the oxidation of aniline solution based on sulfate radicals (SO4?.) toward Fenton-like reaction. Magnetic MxOy@N-C exhibits an unexpectedly high catalytic activity in the degradation of aniline in water. A high magnetic MxOy@N-C catalytic activity was observed after the evaluation by aniline degradation in water. Aniline degradation was found to follow the first-order kinetics, and as a result, various metals significantly affected the structures and performances of the catalysts, and their catalytic activity followed the order of Co > Mn > Fe. The nanoparticles displayed good magnetic separation under the magnetic field.
Schiff base centered fluorescent organic compound 1,1′-[(1E,2E)-hydrazine-1,2-diylidenedi(E)methylylidene]- dinaphthalen-2-ol (HN) was synthesized followed by spectral characterization viz., NMR, IR and Mass spectroscopy. The fluorescent nanoparticles of HN prepared using reprecipitation method shows red shifted aggregation induced enhanced emission (AIEE) with respect to HN solution in acetone. The average particle size of nanoparticles (HNNPs) is of 67.2 nm shows sphere shape morphology. The surfactant cetyltrimethyl ammonium bromide (CTAB) used to stabilize HNNPs induces positive charge surface with zeta potential of 11.6 mV. The positive charge of HNNPs responsible to adsorb oppositely charged analyte on its surface with binding interactions. The fluorescence experiments performed with and without addition of different analytes to the aqueous suspension of HNNPs shows selective fluorescence quenching of HNNPs by D-Penicillamine (D-PA). The effect of other coexisting analytes does not affect the selective sensing behavior of D-PA. The mechanism of binding between HNNPs and D-PA was discussed on the basis of electrostatic interaction and adsorption phenomenon. The results interpreted by using DLS-Zeta sizer, Fluorescence lifetime measurements, conductometric titration supports the electrostatic adsorption between HNNPs and D-PA. The method has extremely low limit of detection (LOD) value 0.021 ppm is of significant as compared to reported methods. The proposed fluorescence quenching method was effectively used for quantitative estimation of D-PA from pharmaceutical medicine.
Graphical Abstract The fluorescence quenching based selective recognition of D-Penicillamine (D-PA) by using Schiff base centered fluorescent organic nanoparticles was developed and successfully applied to quantitative determination of D-PA from pharmaceutical samples viz. capsule and tablet.
A label -free DNAzyme amplified biosensor is found to be highly selective and sensitive towards fluorescent detection of Pb2+ ions in aqueous media. The DNAzyme complex has designed by the hybridization of the enzyme and substrate strand. In the presence of Pb2+, the DNAzyme activated and cleaved the substrate strand of RNA site (rA) into two oligonucleotide fragments. Further, the free fragment was hybridized with a complementary strand on the surface of MBs. After magnetic separation, SYBER Green I was added and readily intercalate with the dsDNA to gives a bright fluorescence signal with intensity directly proportional to the concentration of Pb2+ions. A detection limit of 5 nM in Pb2+ the detection range 0 to 500 nM was obtained. This label- free fluorescent biosensor has been successfully applied to the determination of environmental water samples. Then results open up the possibility for real-time quantitative detection of Pb2+ with convenient potential applications in the biological and environmental field.
This work presents the synthesis of magnetite nanoparticle (MNP) coated with poly(N,N-diethylaminoethyl methacrylate)-b-poly(N-isopropyl acrylamide-st-thiolactone acrylamide) (PDEAEMA-b-P(NIPAAm-st-TlaAm) copolymer and its use in controlled drug release and bio-conjugation. TlaAm units in the copolymer were ring-opened with various alkyl amines to form thiol groups (-SH), followed by thiol-ene coupling reactions with acrylamide-coated MNP and then quaternized to obtain cationic copolymer-MNP assemblies (the size <?200 nm/cluster). The use of alkyl amines having various chain lengths (e.g., 1-propylamine, 1-octylamine, or 1-dodecylamine) in the nucleophilic ring-opening reactions of the thiolactone rings affected their magnetic separation ability, water dispersibility, and release rate of doxorubicin model drug. In all cases, when increasing the temperature, they showed a thermo-responsive behavior as indicated by the decrease in hydrodynamic size and the accelerated drug release rate. These copolymer-MNP assemblies could be used as a novel platform with thermal-triggering controlled drug release and capability for adsorption with any negatively charged biomolecules.
A new type of fluorescent chemosensor based on tethered hexa-borondipyrromethene cyclotriphosphazene platform (HBTC) linked via triazole groups was designed and synthesized. Its sensing behavior toward metal ions was investigated by ultraviolet-visible and fluorescence spectroscopies. Addition of a Fe2+ ion to a tetrahydrofuran solution of HBTC gave a visual color change as well as a significantly quenched fluorescence emission, while other tested 19 metal ions induced no color or spectral changes. This compound was found to be highly selective and sensitive for Fe2+ with a low limit of detection (2.03 μM) which is, to the best of our knowledge, the superior than the previously studied chemosensors for Fe2+.
A novel version of the well-known and commercially successful Green Fluorescent Protein (GFP) variant known as EGFP, with an introduced E222H mutation, was produced in this laboratory. Given the current state of hypotheses about the role of glutamate 222, and the observed dominance of the phenolate absorption with an E222H variant observed from earlier study, the new mutant was considered a natural choice to investigate more fully the acid-base behavior of the chromophore in absorption and fluorescence. The bulk of this investigation concerns fitting the excitation, emission and absorption spectra to vibrational progressions of a novel ‘q-deformed’ type at various values of pH, and protein concentration. From these data, and from temperature-dependent fluorescence lifetime data and other experiments (with lanthanide doped gels into which H/EGFP is embedded), we construct a picture of excited inter- state conversion mechanisms, and quenching mechanisms, that attempts to explain many features of the GFP system.
Graphical Abstract Hypothetical proton current loop (orange) upon excitation; electron motion in purple H/EGFP. Solid boxes about waters project toward viewer, dashed boxes project away
Blue emitting cyano substituted isoquinoline dyes were synthesized by one-pot multicomponent reactions (MCRs) of aldehydes, malononitrile, 6-methoxy-1,2,3,4-tetrahydro-naphthalin-1-one and ammonium acetate. Results obtained from spectroscopic (FT-IR, 1H-NMR, 13C-NMR, EI-MS) and elemental analysis of synthesized compounds was in good agreement with their chemical structures. UV–vis and fluorescence spectroscopy measurements proved that all compounds are good absorbent and fluorescent. Fluorescence polarity study demonstrated that these compounds were sensitive to the polarity of the microenvironment provided by different solvents. In addition, spectroscopic and physicochemical parameters, including electronic absorption, excitation coefficient, stokes shift, oscillator strength, transition dipole moment and fluorescence quantum yield were investigated in order to explore the analytical potential of synthesized compounds. The anti-bacterial activity of these compounds were first studied in vitro by the disk diffusion assay against two Gram-positive and two Gram-negative bacteria then the minimum inhibitory concentration (MIC) was determined with the reference of standard drug chloramphenicol. The results displayed that compound 3 was better inhibitors of both types of the bacteria (Gram-positive and Gram-negative) than chloramphenicol.
