Copper‐Catalyzed Cyclization/aza‐Claisen Rearrangement Cascade Initiated by Ketenimine Formation: An Efficient Stereocontrolled Synthesis of α‐Allyl Cyclic Amidines

An efficient and convenient synthesis of α‐allyl cyclic amidines has been achieved by applying a novel cascade reaction. Copper(I)‐mediated in situ N‐sulfonyl ketenimine formation from the reaction of a terminal alkyne with sulfonyl azide is followed by an intramolecular nucleophilic attack on the central carbon atom by an allylic tertiary amine, and then an aza‐Claisen rearrangement takes place through a chair transition state to furnish the titled amidines with complete stereocontrol.     

Three‐Component Asymmetric Mannich Reaction Catalyzed by a Lewis Acid with Rhodium‐Centered Chirality

A highly efficient direct asymmetric three‐component Mannich reaction of an N ‐acylpyrazole, an aldehyde and a primary or secondary amine, was enabled by a rhodium‐based Lewis‐acid catalyst with metal‐centered chirality. Excellent enantioselectivities were achieved for a variety of substrates at a typical catalyst loading of merely 0.5 mol % (23 examples, up to 98 % ee ).     

Coupling of Two Multistep Catalytic Cycles for the One‐Pot Synthesis of Propargylamines from Alcohols and Primary Amines on a Nanoparticulated Gold Catalyst

A one‐pot reaction was performed with a nanoparticulated gold catalyst. A secondary amine is formed through N‐monoalkylation of a primary amine with an alcohol by a borrowing hydrogen methodology in a three‐step reaction. The secondary amine formed enters into a second A³‐coupling cycle to give propargylamines. The multistep reaction requires a gold species formed and stabilized on a ceria surface.     

Novel synthesis of N‐substituted polyacrylamides: Derivatization of poly(acrylic acid) with amines using a triazine‐based condensing reagent

Poly(acrylic acid) (PAA) was derivatized through the reaction of its pendant carboxylic acid (CO₂H) groups with a wide range of amine‐terminated molecules. These molecules contained alkyl, hydroxyl, sulfonic acid, or perfluoroalkyl groups. N‐substitution of PAA was carried out by the simple addition of 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMTMM), a triazine‐based condensing reagent, to a mixture of PAA and amine‐terminated molecules. From proton nuclear magnetic resonance and infrared spectroscopy, it was confirmed that these functional molecules were introduced into the PAA side chain via amide bonds. By the alteration of the synthetic conditions, functional side‐chain contents of greater than 95% were achieved for aqueous reactions with taurine, ethanol amine, and butyl amine. Side‐chain conversion was limited to ≤80% for reactions with perfluoroalkyl amines in methanol. Thus, DMTMM is an attractive replacement for carbodiimide condensing reagents such as 1,3‐dicyclohexylcarbodiimide and 1‐ethyl‐3‐(3‐dimethylaminopropyl) carbodiimide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 126–136, 2006     

Synthesis and polymerization of 5‐(N,N‐dimethylamino)naphthylacetylene with homogeneous rhodium and palladium complexes

The monomer 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine ( 2 ) was satisfactorily obtained by a heterocoupling reaction between 5‐iodo‐(N,N‐dimethyl)naphthalen‐1‐amine and 2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system and followed by acetone elimination. Poly(5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine) was isolated by the reaction of 2 in the presence of homogeneous rhodium and palladium complexes. On the basis of the spectroscopic data, the polymer always showed a cis–transoidal, stereoregular structure. Moreover, only with the rhodium catalyst in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The kinetics of the catalyzed reaction were analyzed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 437–446, 2007     

A Catalyst‐Free Amination of Functional Organolithium Reagents by Flow Chemistry

Reported is the electrophilic amination of functional organolithium intermediates with well‐designed aminating reagents under mild reaction conditions using flow microreactors. The aminating reagents were optimized to achieve efficient C?N bond formation without using any catalyst. The electrophilic amination reactions of functionalized aryllithiums were successfully conducted under mild reaction conditions, within 1 minute, by using flow microreactors. The aminating reagent was also prepared by the flow method. Based on stopped‐flow NMR analysis, the reaction time for the preparation of the aminating reagent was quickly optimized without the necessity of work‐up. Integrated one‐flow synthesis consisting of the generation of an aryllithium, the preparation of an aminating reagent, and their combined reaction was successfully achieved to give the desired amine within 5 minutes of total reaction time.     

Enhanced photopolymerization of dimethacrylates with ketones,amines, and iodonium salts: The CQ system

The kinetics and mechanism of the photopolymerization of dimethacrylates using three‐component initiation systems consisting of camphorquinone (CQ), diphenyliodonium hexafluorophosphate (Ph₂IPF₆), and either N,N,3,5‐tetramethylaniline (TMA) or N,N‐dimethylbenzylamine or triethylamine were studied by photo‐DSC and UV‐visible spectroscopy. The effect of monomer structure on the curing kinetics and photobleaching were also investigated. Photo‐DSC studies showed fivefold increases in polymerization rate when all three components were present and the kinetics followed the trend: CQ/amine/Ph₂IPF₆ ? CQ/amine > CQ/Ph₂IPF_6.. For both CQ/amine/Ph₂IPF₆ and CQ/amine systems, the CQ was rapidly photobleached during the photo‐DSC timescale but for the systems without amine there was an induction stage before CQ photobleaching was evident. Studies of the effect of monomer type on the photobleaching rate show that the photobleaching behavior was independent of monomer structure. Three photoinitiation mechanisms have been proposed. The reaction mechanism of the CQ/amine/Ph₂IPF₆ system involves the reduction of the excited CQ molecule by the amine to form ketyl and aminoalkyl radicals, followed by the irreversible oxidation of the amine, and to a lesser extent, the ketyl radical by the iodonium salt, to form an initiating radical. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Catalytic Hydrogen Production by Ruthenium Complexes from the Conversion of Primary Amines to Nitriles: Potential Application as a Liquid Organic Hydrogen Carrier

The potential application of the primary amine/nitrile pair as a liquid organic hydrogen carrier (LOHC) has been evaluated. Ruthenium complexes of formula [(p‐cym)Ru(NHC)Cl₂] (NHC=N‐heterocyclic carbene) catalyze the acceptorless dehydrogenation of primary amines to nitriles with the formation of molecular hydrogen. Notably, the reaction proceeds without any external additive, under air, and under mild reaction conditions. The catalytic properties of a ruthenium complex supported on the surface of graphene have been explored for reutilization purposes. The ruthenium‐supported catalyst is active for at least 10 runs without any apparent loss of activity. The results obtained in terms of catalytic activity, stability, and recyclability are encouraging for the potential application of the amine/nitrile pair as a LOHC. The main challenge in the dehydrogenation of benzylamines is the selectivity control, such as avoiding the formation of imine byproducts due to transamination reactions. Herein, selectivity has been achieved by using long‐chain primary amines such as dodecylamine. Mechanistic studies have been performed to rationalize the key factors involved in the activity and selectivity of the catalysts in the dehydrogenation of amines. The experimental results suggest that the catalyst resting state contains a coordinated amine.     

Intramolecular Redox‐Mannich Reactions: Facile Access to the Tetrahydroprotoberberine Core

Cyclic amines such as pyrrolidine undergo redox‐annulations with 2‐formylaryl malonates. Concurrent oxidative amine α‐C?H bond functionalization and reductive N‐alkylation render this transformation redox‐neutral. This redox‐Mannich process provides regioisomers of classic Reinhoudt reaction products as an entry to the tetrahydroprotoberberine core, enabling the synthesis of (±)‐thalictricavine and its epimer. An unusually mild amine‐promoted dealkoxycarbonylation was discovered in the course of these studies.     

Polymerization of conjugated 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine with rhodium and palladium complexes

The monomer 5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine was satisfactory obtained through the heterocoupling reaction of 5‐ethynyl‐N,N‐dimethylnaphthalen‐1‐amine and 4‐(5‐iodo‐1‐naphthyl)‐2‐methyl‐3‐butyn‐2‐ol catalyzed by a palladium–copper system, followed by acetone elimination. Poly{5‐[(5‐ethynyl‐1‐naphthyl)ethynyl]‐N,N‐dimethylnaphthalen‐1‐amine} was obtained through the reaction of the acetylene monomer with homogeneous rhodium and palladium catalyst complexes. The structure of the polymers always showed a trans–cisoidal chain configuration on the basis of IR and NMR spectra. Moreover, only for the rhodium catalyst complex in methanol was a dimeric product isolated in a very low yield, having a conjugated terminal ene–yne structure, which permitted the consideration of a metallated chain‐transfer intermediate in the polymer propagation. The mass determination of the polymers, by osmometry and gel permeation chromatography techniques, showed low average molecular weights. The kinetics of the catalyzed polymerization were analyzed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2038–2047, 2007     

Efficient Synthesis of Trifluoromethyl Amines through a Formal Umpolung Strategy from the Bench‐Stable Precursor (Me4N)SCF3

Reported herein is the one‐pot synthesis of trifluoromethylated amines at room temperature using the bench‐stable (Me₄N)SCF₃ reagent and AgF. The method is rapid, operationally simple and highly selective. It proceeds via a formal umpolung reaction of the SCF₃ with the amine, giving quantitative formation of thiocarbamoyl fluoride intermediates within minutes that can readily be transformed to N‐CF₃. The mildness and high functional group tolerance render the method highly attractive for the late‐stage introduction of trifluoromethyl groups on amines, as demonstrated herein for a range of pharmaceutically relevant drug molecules.     

Metal‐free Synthesis of Aryl Amines: Beyond Nucleophilic Aromatic Substitution

A mild and metal‐free approach to C?N coupling is described that employs diaryliodonium salt electrophiles and secondary aliphatic amine nucleophiles. This reaction results in direct ipso‐substitution of the iodonium moiety and unsymmetrical aryl(TMP)iodonium salts are primarily employed. Moreover, arene substituents and substitution patterns that currently pose a challenge to classical metal‐free methods are accommodated and the alicyclic amine nucleophiles used here are unprecedented in other contemporary metal‐free C?N coupling reactions.     

Synthesis and optical resolution of aminophosphines with axially chiral C(aryl)-N(amine) bonds for use as ligands in asymmetric catalysis

N-Aryl indoline-type aminophosphines 1a-c were obtained in good yields by a nucleophilic aromatic substitution (S(N)Ar) reaction followed by silane reduction. Aminophosphine 1d was also prepared from 2,3-difluorobenzaldehyde (4) via dimethylhydrazone. Optical resolution of C(aryl)-N(amine) bond atropisomers was achieved using (S)-(+)-di-mu-chlorobis[2-[(dimethylamino)ethyl]phenyl-C(2),N]dipalladium(II) ((S)-10). The determination of absolute configuration and the investigation of the rotation barrier for C(aryl)-N(amine) bond axial stability of an aminophosphine 1 are described. Finally, the ability of the chiral phosphine ligand 1 is demonstrated in a catalytic asymmetric reaction, such as a palladium-catalyzed asymmetric allylic alkylation of 1,3-diphenyl-2-propenyl acetate with dimethyl malonate (up to 95% ee).     

Photoinitiating behavior of benzophenone derivatives covalently bonded tertiary amine group for UV‐curing acrylate systems

A series of benzophenone derivatives (N‐BPs) containing tertiary amine group used as hydrogen abstraction‐type (type II) photoinitiators were synthesized through the addition reaction of secondary amines with 4‐(2,3‐epoxypropyloxy) benzophenone. The chemical structures were characterized with ¹H NMR, FTIR spectroscopy, and UV spectrum measurements. The N‐BPs showed the higher absorption in 300–400 nm than benzophenone (BP). The photoinitiating activity was examined based on the photopolymerization of 1,6‐hexanediol diacrylate using photo‐DSC method. The results showed that the photoinitiating efficiency was negatively affected by the molecular structure of alkyl group connected to the tertiary amine with the order of isopropyl (N‐BPI) < methyl (N‐BPM) < ethyl (N‐BPE) < propyl (N‐BPP). Moreover, the diethanolamine‐modified benzophenone derivative (N‐BPOH) had the highest‐photoinitiating efficiency for free radical polymerization systems among the N‐BPs. Copyright © 2011 John Wiley & Sons, Ltd.     

Ruthenium‐catalyzed formation of quinolines via reductive cyclization of nitroarenes with tris(3‐hydroxypropyl)amine in an aqueous medium

Nitroarenes react with tris(3‐hydroxypropyl)amine in an aqueous medium (dioxane/H₂O) at 180° in the presence of a catalytic amount of a ruthenium catalyst and tin(II) chloride along with isopropanol as hydrogen donor to afford the corresponding quinolines in good yields. The presence of tin(II) chloride is essential for the formation of quinolines. A reaction pathway involving initial reduction of nitroarenes to anilines, propanol group transfer from tris(3‐hydroxypropyl)amine to anilines to form 3‐anilino‐1‐propanols, N‐alkylation of anilines by 3‐anilino‐1‐propanol to form 1,3‐dianilinopropane and intramolecular heteroannulation of 1,3‐dianilinopropane is proposed for this catalytic process.     

C–N Coupling of 1,2‐Dihydro‐2,2,4‐trimethylquinoline Derivatives via a Silver(I)‐Catalyzed Direct Functionalization of a C–H Bond

Two C,N‐linked dimeric 1,2‐dihydro‐2,2,4‐trimethylquinolines, namely 6‐chloro‐1‐(6‐chloro‐1,2‐dihydro‐2,2,4‐trimethylquinolin‐8‐yl)‐1,2‐dihydro‐2,2,4‐trimethylquinoline ( 3a ) and 6‐ethoxy‐1‐(6‐ethoxy‐1,2‐dihydro‐2,2,4‐trimethylquinolin‐8‐yl)‐1,2‐dihydro‐2,2,4‐trimethylquinoline ( 3b ), have been prepared through a silver‐catalyzed dimerization of their corresponding monomers. The effect of different silver salts on the reaction was also investigated, and the obtained results suggest that silver ions effectively catalyzed the formation of a C–N bond under these mild conditions. This represents one of the rare reports on the silver‐catalyzed C–N bond formation through a coupling of a secondary amine and an activated aromatic system, via a direct C–H functionalization. Theoretical studies showed that these dimeric structures favor a conformation in which their monomer units are oriented approximately perpendicular to each other, with an intramolecular hydrogen bond (N–H distance of 2.33 Å) forming between the hydrogen atom of the amine in one of the monomeric units and the tertiary nitrogen atom of the other one.     

Heterogeneous CuII‐Catalysed Solvent‐Controlled Selective N‐Arylation of Cyclic Amides and Amines with Bromo‐iodoarenes

A selective N‐arylation of cyclic amides and amines in DMF and water, respectively, catalysed by Cu^II/Al₂O₃ has been achieved. This protocol has been employed for the synthesis of a library of arenes bearing a cyclic amide and an amine moiety at two ends, including a few scaffolds of therapeutic importance. The mechanism has been established based on detailed electron paramagnetic resonance (EPR) spectroscopy, X‐ray photoelectron spectroscopy (XPS), UV diffuse reflectance spectroscopy (DRS) and inductively coupled plasma‐mass spectrometry (ICP‐MS) studies of the catalyst at different stages of the reaction. The Cu^II/Al₂O₃ catalyst was recovered and recycled for subsequent reactions.     

Synthesis of poly(urethane‐imide) using aromatic secondary amine‐blocked polyurethane prepolymer

A set of poly(urethane‐imide)s were prepared using blocked Polyurethane (PU) prepolymer and pyromellitic dianhydride (PMDA). The PU prepolymer was prepared by the reaction of polyether glycol and 2,4‐tolylene diisocyanate, and end capped with N‐methyl aniline. The PU prepolymer was reacted with PMDA until the evolution of carbon dioxide ceased. The effect of tertiary amine catalysts, organo tin catalysts, solvents, and reaction temperature were studied and compared with the poly(urethane‐imide) prepared using phenol‐blocked PU prepolymer. N‐methyl aniline blocked PU prepolymer gave a higher molecular weight poly(urethane‐imide) at a lower reaction temperature in a shorter time. Amine catalysts were found to be more efficient than organo tin catalysts. The reaction was favorable in particular with N‐ethylmorpholine and diazabicyclo(2.2.2)octane (DABCO) as catalysts, and dimethylpropylene urea as a reaction medium. The poly(urethane‐imide)s were characterized by FTIR, GPC, TGA, and DSC analyses. The molecular weight decreased with an increase in reaction temperature. The thermal stability of the PU was found to increase by the introduction of imide component. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4032–4037, 2000     

Odd–Even Alternation in Tautomeric Porous Organic Cages with Exceptional Chemical Stability

Amine‐linked (C−NH) porous organic cages (POCs) are preferred over the imine‐linked (C=N) POCs owing to their enhanced chemical stability. In general, amine‐linked cages, obtained by the reduction of corresponding imines, are not shape‐persistent in the crystalline form. Moreover, they require multistep synthesis. Herein, a one‐pot synthesis of four new amine‐linked organic cages by the reaction of 1,3,5‐triformylphloroglucinol (Tp) with different analogues of alkanediamine is reported. The POCs resulting from the odd diamine (having an odd number of −CH₂ groups) is conformationally eclipsed, while the POCs constructed from even diamines adopt a gauche conformation. This odd–even alternation in the conformation of POCs has been supported by computational calculations. The synthetic strategy hinges on the concept of Schiff base condensation reaction followed by keto–enol tautomerization. This mechanism is the key for the exceptional chemical stability of cages and facilitates their resistance towards acids and bases.     

Catalytic Asymmetric Mannich Reaction with N‐Carbamoyl Imine Surrogates of Formaldehyde and Glyoxylate

N,O‐acetals (NOAcs) were developed as bench stable surrogates for N‐carbamoyl, (Boc, Cbz and Fmoc) formaldehyde and glyoxylate imines in asymmetric Mannich reactions. The NOAcs can be directly utilized in the chiral primary amine catalyzed Mannich reactions of both acyclic and cyclic β‐ketocarbonyls with high yields and excellent stereoselectivity. The current reaction offers a straightforward approach in the asymmetric synthesis of α‐ or β‐amino carbonyls bearing chiral quaternary centers in a practical and highly stereocontrolled manner.