Pyrazole Based Mono‐ and Di‐Substituted Half Sandwich d6 Platinum Group Metal Complexes: Synthesis and Spectral Characterization

Reactions of pyrazole based ligand and halide bridged arene d⁶ metal precursors resulted a series of mono and di‐substituted pyrazole based half sandwich d⁶ metal complexes. In general, they are formulated as [(arene)MLCl₂] [M = Ru, arene = benzene ( 1 ), p‐cymene ( 2 ), arene = Cp*, M = Rh ( 3 ) and Ir ( 4 )] and [(arene)ML₂Cl] [M = Ru, arene = benzene ( 5 ), p‐cymene ( 6 ), arene = Cp*, M = Rh ( 7 ) and Ir ( 8 )]. All these complexes were characterized by various spectroscopic techniques (IR, ¹H NMR, ESI‐MS, and UV/Vis). The molecular structures were confirmed by single‐crystal X‐ray diffraction technique. Spectroscopic studies revealed that complexation i.e., mono‐ and di‐substitution occurred by the ratio‐based reaction between pyrazole ligand and metal precursor through the neutral nitrogen rather than protic nitrogen. In these complexes deprotonation of the protic nitrogen does not occur unlike the other complexes containing pyrazole derivatives, in which the pyrazole ligand is anionic.     

Weak Ligand‐Field Effect from Ancillary Ligands on Enhancing Single‐Ion Magnet Performance

A series of bis‐pentamethylcyclopentadienyl‐supported Dy complexes containing different ancillary ligands were synthesized and characterized. Magnetic studies showed that 1 Dy [Cp*₂DyCl(THF)], 1 Dy’ [Cp*₂DyCl₂K(THF)]_n, 2 Dy [Cp*₂DyBr(THF)], 3 Dy [Cp*₂DyI(THF)] and 4 Dy [Cp*₂DyTp] (Tp=hydrotris(1‐pyrazolyl)borate) were single‐ion magnets (SIMs). The 1D dysprosium chain 1 Dy’ exhibited a hysteresis at up to 5 K. Furthermore, 3 Dy featured the highest energy barrier (419 cm^?1) among the complexes. The effects of ancillary ligands on single‐ion magnetic properties were studied by experimental, ab initio calculations and electrostatic analysis methods in detail. These results demonstrated that the QTM rate was strongly dependent on the ancillary ligands and that a weak equatorial ligand field could be beneficial for constructing Dy‐SIMs.     

Synthesis and Structure of a 2, 8, 9‐Trioxa‐3, 5, 7‐trisila‐1‐titanaadamantane

The title compound has been prepared from [Ti(η⁵‐C₅Me₅)Cl₃] and cis‐cis‐(t‐BuSi(OH)—CH₂)₃ in hexane solution in the presence of Et₃N. The pale yellow complex was characterized by NMR and MS spectra, as well as by a crystal structure determination. The two crystallographic independent molecules in the triclinic unit cell (space group P1¯, No. 2, Z = 4) both have a nearly identical adamantane‐like TiO₃Si₃C₃ cage of approximate C_3v symmetry. The exocyclic C—C—C bond angles in the Cp‐ligand range from 123° to 129°. A quantum chemical calculation of the free molecule predicts this range to be 124° to 127°. The arrangement of the molecules in the crystal is characteristic for an offset face‐to‐face ππ stacking of the aromatic η⁵‐C₅Me₅ rings.     

Synthesis,structural and chemosensitivity studies of arene d6 metal complexes having N‐phenyl‐N´‐(pyridyl/pyrimidyl)thiourea derivatives

The d⁶ metal complexes of thiourea derivatives were synthesized to investigate its cytotoxicity. Treatment of various N‐phenyl‐N´ pyridyl/pyrimidyl thiourea ligands with half‐sandwich d⁶ metal precursors yielded a series of cationic complexes. Reactions of ligand (L1‐L3) with [(p‐cymene)RuCl₂]₂ and [Cp*MCl₂]₂ (M = Rh/Ir) led to the formation of a series of cationic complexes bearing general formula [(arene)M(L1)к²_(N,S)Cl]⁺, [(arene)M(L2)к²_(N,S)Cl]⁺ and [(arene)M(L3)к²_(N,S)Cl]⁺ [arene = p‐cymene, M = Ru ( 1 , 4 , 7 ); Cp*, M = Rh ( 2 , 5 , 8 ); Cp*, Ir ( 3 , 6 , 9 )]. These compounds were isolated as their chloride salts. X‐ray crystallographic studies of the complexes revealed the coordination of the ligands to the metal in a bidentate chelating N,S‐ manner. Further the cytotoxicity studies of the thiourea derivatives and its complexes evaluated against HCT‐116 (human colorectal cancer), MIA‐PaCa‐2 (human pancreatic cancer) and ARPE‐19 (non‐cancer retinal epithelium) cancer cell lines showed that the thiourea ligands displayed no activity. Upon complexation however, the metal compounds possesses cytotoxicity and whilst potency is less than cisplatin, several complexes exhibited greater selectivity for HCT‐116 or MIA‐PaCa‐2 cells compared to ARPE‐19 cells than cisplatin in vitro. Rhodium complexes of thiourea derivatives were found to be more potent as compared to ruthenium and iridium complexes.     

Electronic Structure of Thiolate‐bridged Diiron Complexes and a Single‐electron Oxidation Reaction: A Combination of Experimental and Computational Studies

Single‐electron oxidation of a diiron‐sulfur complex [Cp*Fe(μ‐bdt)FeCp*] ( 1 , Cp*=η⁵‐C₅Me₅; bdt=benzene‐1,2‐dithiolate) to [Cp*Fe(μ‐bdt)FeCp*]⁺ ( 2 ) has been experimentally conducted. The bdt ligand with redox‐active character has been computationally proposed to be a dianion (bdt^2?) rather than previously proposed monoanion (bdt^·?) radical in 1 though it has un‐equidistant aromatic C? C bond lengths. The ground state of 1 is predicted to be two low‐spin ferrous ions (S_Fe=0) and 2 has a medium‐spin ferric ion (S_Fe=1/2) and a low‐spin ferrous center (S_Fe=0), and the oxidation of 1 to 2 is calculated to be a single‐metal‐based process. Both complexes have no significant antiferromagnetic coupling character.     

Ethylene‐Norbornene Terpolymerization with 5‐Vinyl‐2‐norbornene Using Single‐Site Catalysts

The incorporation of 5‐vinyl‐2‐norbornene (VNB) into ethylene‐norbornene copolymer was investigated with catalysts [Ph₂C(Fluo)(Cp)]ZrCl₂ ( 1 ), rac‐[Et(Ind)₂]ZrCl₂ ( 2 ), and [Me₂Si(Me₄Cp)^tBuN]TiCl₂ ( 3 ) in the presence of MAO by terpolymerizing different amounts of 5‐vinyl‐2‐norbornene with constant amounts of ethylene and norbornene at 60°C. The highest cycloolefin incorporations and highest activity in terpolymerizations were achieved with 1 . The distribution of the monomers in the terpolymer chain was determined by NMR spectroscopy. As confirmed by XRD and DSC analysis, catalysts 1 and 3 produced amorphous terpolymer, whereas 2 yielded terpolymer with crystalline fragments of long ethylene sequences. When compared with poly‐(ethylene‐co‐norbornene), VNB increased both the glass transition temperatures and molar masses of terpolymers produced with the constrained geometry catalyst whereas decreased those for the metallocenes.     

A Trinuclear Radical‐Bridged Lanthanide Single‐Molecule Magnet

Assembly of the triangular, organic radical‐bridged complexes Cp*₆Ln₃(μ₃‐HAN) (Cp*=pentamethylcyclopentadienyl; Ln=Gd, Tb, Dy; HAN=hexaazatrinaphthylene) proceeds through the reaction of Cp*₂Ln(BPh₄) with HAN under strongly reducing conditions. Significantly, magnetic susceptibility measurements of these complexes support effective magnetic coupling of all three Ln^III centers through the HAN^3−. radical ligand. Thorough investigation of the Dy^III congener through both ac susceptibility and dc magnetic relaxation measurements reveals slow relaxation of the magnetization, with an effective thermal relaxation barrier of U_eff=51 cm⁻¹. Magnetic coupling in the Dy^III complex enables a large remnant magnetization at temperatures up to 3.0 K in the magnetic hysteresis measurements and hysteresis loops that are open at zero‐field up to 3.5 K.     

Synthesis,characterization and polymerization of the novel carbazole‐based monomer 9‐(bicyclo[2.2.1]hept‐5‐en‐2‐ylmethyl)‐9H‐carbazole

Synthesis and characterization of a novel carbazole‐based monomer, 9‐(bicyclo[2.2.1]hept‐5‐en‐2‐ylmethyl)‐9H‐carbazole (BHMCZ) and its copolymerization with ethylene by using two metallocene/MAO catalyst systems are presented. The monomer was characterized by means of NMR spectroscopy, MS and elementary analysis. Copolymerization studies were conducted using [Ph₂C(Ind)(Cp)ZrCl₂] and [Ph₂C(Flu)(Cp)ZrCl₂] catalysts. The [Ph₂C(Ind)(Cp)ZrCl₂] catalyst gave a copolymer containing as much as 4.6 mol‐% of BHMCZ. Polymers were characterized using NMR spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC).     

Construction of π‐Surface‐Metalated Pillar[5]arenes which Bind Anions via Anion–π Interactions

By simple ligand exchange of the cationic transition‐metal complexes [(Cp*)M(acetone)₃](OTf)₂ (Cp*=pentamethylcyclopentadienyl and M=Ir or Rh) with pillar[5]arene, mono‐ and polynuclear pillar[5]arenes, a new class of metalated host molecules, is prepared. Single‐crystal X‐ray analysis shows that the charged transition‐metal cations are directly bound to the outer π‐surface of aromatic rings of pillar[5]arene. One of the triflate anions is deeply embedded within the cavity of the trinuclear pillar[5]arenes, which is different to the host–guest behavior of most pillar[5]arenes. DFT calculation of the electrostatic potential revealed that the metalated pillar[5]arenes featured an electron‐deficient cavity due to the presence of the electron‐withdrawing transition metals, thus allowing encapsulation of electron‐rich guests mainly driven by anion–π interactions.     

Zur Reaktivität von Titanocenkomplexen [Ti(Cp′)2(η2‐Me3SiC≡CSiMe3)] (Cp′ = Cp,Cp*) gegenüber Benzoldicarbonsäuren

On the Reactivity of Titanocene Complexes [Ti(Cp′)₂(η²‐Me₃SiC≡CSiMe₃)] (Cp′ = Cp, Cp*) towards Benzenedicarboxylic Acids Titanocene complexes [Ti(Cp′)₂(BTMSA)] ( 1a , Cp′ = Cp = η⁵‐C₅H₅; 1b , Cp′ = Cp* = η⁵‐C₅Me₅; BTMSA = Me₃SiC≡CSiMe₃) were found to react with iodine and methyl iodide yielding [Ti(Cp′)₂(μ‐I)₂] ( 2a / b ; a refers to Cp′ = Cp and b to Cp′ = Cp*), [Ti(Cp′)₂I₂] ( 3a / b ) and [Ti(Cp′)₂(Me)I] ( 4a / b ), respectively. In contrast to 2a , complex 2b proved to be highly moisture sensitive yielding with cleavage of HCp* [{Ti(Cp*)I}₂(μ‐O)] ( 7 ). The corresponding reactions of 1a / b with p‐cresol and thiophenol resulted in the formation of [Ti(Cp′)₂{O(p‐Tol)}₂] ( 5a / b ) and [Ti(Cp′)₂(SPh)₂] ( 6a / b ), respectively. Reactions of 1a and 1b with 1,n‐benzenedicarboxylic acids (n = 2–4) resulted in the formation of dinuclear titanium(III) complexes of the type [{Ti(Cp′)₂}₂{μ‐1,n‐(O₂C)₂C₆H₄}] (n = 2, 8a / b ; n = 3, 9a / b ; n = 4, 10a / b ). All complexes were fully characterized analytically and spectroscopically. Furthermore, complexes 7 , 8b , 9a ·THF, 10a / b were also be characterized by single‐crystal X‐ray diffraction analyses.     

The dimeric mixed‐ligand titana­carborane sandwich [1‐(Cp)‐1‐Ti‐2‐(Me)‐3‐(SiMe3)‐2,3‐C2B4H4]2

The title dimer, bis­[1‐cyclo­penta­dienyl‐2‐methyl‐1‐titana‐3‐tri­methylsilyl‐2,3‐dicarba‐closo‐hexaborane(6)], [Ti(C₅H₅)(C₆­H₁₆­B₄Si)]₂, reveals that the centrosymmetric mol­ecule consists of two bent‐sandwich titanacarboranes bridged by the B—H—Ti bonds. The average bond distances are Ti—B 2.445 (3), Ti—C(cage) 2.334 (2) and Ti—C(Cp) 2.376 (3) Å, and the corresponding bond angles are Cp—Ti—Cp 163.2 (1) and Cp—Ti—Cb (Cb = C₂B₃ face) 139.9 (1)°; the Ti—H separations are 2.10 (2) and 2.19 (2) Å.     

Angular‐Resolved Magnetometry Beyond Triclinic Crystals Part II: Torque Magnetometry of Cp*ErCOT Single‐Molecule Magnets

The experimental investigation of the molecular magnetic anisotropy in crystals in which the magnetic centers are symmetry related, but do not have a parallel orientation has been approached by using torque magnetometry. A single crystal of the orthorhombic organometallic Cp*ErCOT [Cp*=pentamethylcyclopentadiene anion (C₅Me₅^?); COT=cyclooctatetraenedianion (C₈H₈^2?)] single‐molecule magnet, characterized by the presence of two nonparallel families of molecules in the crystal, has been investigated above its blocking temperature. The results confirm an Ising‐type anisotropy with the easy direction pointing along the pseudosymmetry axis of the complex, as previously suggested by out‐of‐equilibrium angular‐resolved magnetometry. The use of torque magnetometry, not requiring the presence of magnetic hysteresis, proves to be even more powerful for these purposes than standard single‐crystal magnetometry. Furthermore, exploiting the sensitivity and versatility of this technique, magnetic anisotropy has been investigated up to 150 K, providing additional information on the crystal‐field splitting of the ground J multiplet of the Er^III ion.     

Polymerization of vinyl chloride with half‐titanocene/methylaluminoxane catalysts

The polymerization of vinyl chloride (VC) with half‐titanocene /methylaluminoxane (MAO) catalysts is investigated. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst (Cp* = η⁵‐pentamethylcyclopentadienyl) afforded high‐molecular‐weight poly(vinyl chloride) (PVC) in good yields, although the polymerization proceeded at a slow rate. With the Cp*TiCl₃/MAO catalyst, the polymer was also obtained, but the polymer yield was lower than that with the Cp*Ti(OCH₃)₃/MAO catalyst. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst was influenced by the MAO/Ti mole ratio and reaction temperature, and the optimum was observed at the MAO/Ti mole ratio of about 10. The optimum reaction temperature of VC with the Cp*Ti(OCH₃)₃/MAO catalyst was around 20 °C. The stereoregularity of PVC obtained with the Cp*Ti(OCH₃)₃/MAO catalyst was different from that obtained with azobisisobutyronitrile, but highly stereoregular PVC could not be synthesized. From the elemental analyses, the ¹H and ¹³C NMR spectra of the polymers, and the analysis of the reduction product from PVC to polyethylene, the polymer obtained with Cp*Ti(OCH₃)₃/MAO catalyst consisted of only regular head‐to‐tail units without any anomalous structure, whereas the Cp*TiCl₃/MAO catalyst gave the PVC‐bearing anomalous units. The polymerization of VC with the Cp*Ti(OCH₃)₃/MAO catalyst did not inhibit even in the presence of radical inhibitors such as 2,2,6,6,‐tetrametylpiperidine‐1‐oxyl, indicating that the polymerization of VC did not proceed via a radical mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 248–256, 2003     

Experimental Determination of Magnetic Anisotropy in Exchange‐Bias Dysprosium Metallocene Single‐Molecule Magnets

We investigate a family of dinuclear dysprosium metallocene single‐molecule magnets (SMMs) bridged by methyl and halogen groups [Cp′₂Dy(μ‐X)]₂ (Cp′=cyclopentadienyltrimethylsilane anion; 1 : X=CH₃^?; 2 : X=Cl^?; 3 : X=Br^?; 4 : X=I^?). For the first time, the magnetic easy axes of dysprosium metallocene SMMs are experimentally determined, confirming that the orientation of them are perpendicular to the equatorial plane which is made up of dysprosium and bridging atoms. The orientation of the magnetic easy axis for 1 deviates from the normal direction (by 10.3°) due to the stronger equatorial interactions between Dy^III and methyl groups. Moreover, its magnetic axes show a temperature‐dependent shifting, which is caused by the competition between exchange interactions and Zeeman interactions. Studies of fluorescence and specific heat as well as ab initio calculations reveal the significant influences of the bridging ligands on their low‐lying exchange‐based energy levels and, consequently, low‐temperature magnetic properties.     

Silyl‐functionalized polyolefins via co‐polymerization of vinylsilanes with ethylene or propylene catalyzed by group IV metallocene complexes

Vinylsilanes CH₂CHSiR₃ (R = Me, NMe₂, OMe, OTMS) copolymerize with ethylene rapidly in the presence of catalytic amounts of [Cp′₂ZrMe][MeB(C₆F₅)₃] (Cp′ = η⁵‐C₅Me₅) ( I ) to give high molecular weight silyl‐functionalized polyethylene. The molecular weight of the polymer can be controlled by varying the comonomer concentration as well as the reaction temperature. Relatively low molecular weight polymer was produced at a higher silyl monomer concentration and a higher polymerization temperature. The incorporation of silyl monomer in the polymer is in the range of 0.1‐ 6.0%. On the other hands, catalysts [Cp₂ZrMe][MeB(C₆F₅)₃] (Cp′ = η⁵‐C₅H₅) ( II ) and [Cp″₂ZrMe][MeB(C₆F₅)₃] (Cp″ = η⁵‐1,2‐C₅Me₂H₃) ( III ) show much lower activity. With the use of more coordinatively unsaturated constrained geometry catalysts (CGC), Me₂Si(η⁵‐C₅Me₄)(N^tBu)MMe][MeB(C₆F₅)₃] ( IV , M = Zr; V , M = Ti), the silyl monomer incorporation in the polymer was increased to 40%. The Ti catalyst is more active and produces polymer with a higher molecular weight with a higher silyl monomer incorporation at 23 °C. The copolymerization of vinyltrimethylsilane with propylene was also investigated with these catalysts, yielding high silyl‐functionalized propylene copolymer/oligmer. The microstructure of the copolymers/oligomers has been thoroughly investigated by 1D and 2D NMR techniques (¹H, ¹³C, NOE, DEPT, HETCOR, and FLOCK). The results show that the backbone of the copolymers/oligomers is essentially random. Several termination pathways have been identified. In particular, two unsaturated silyl terminations, cis and/or trans‐TMS CHCH , were identified with the constrained geometry catalysts. Their formation was rationalized based on transition state models. It was found that occasional 1,2‐insertion of either propylene or vinyltrimethylsilane into the chain propagation process has a high probability serving as the trigger for polymer chain termination via β‐H elimination. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1308–1321     

Half‐titanocene complexes bearing dianionic 6‐benzimidazolylpyridyl‐2‐carboximidate ligands: Synthesis,characterization, and their ethylene polymerization

6‐Benzimidazolylpyridyl‐2‐carboximidic half‐titanocene complexes, Cp′TiLCl (Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = 6‐benzimidazolylpyridine‐2‐carboxylimidic, C1–C13 ), were synthesized and characterized along with single‐crystal X‐ray diffraction. The half‐titanocene chlorides containing substituted cyclopentadienyl groups, especially pentamethylcyclopentadienyl groups were more stable, while those without substituents on the cyclopentadienyl groups were easily transformed into their dimeric oxo‐bridged complexes, (CpTiL)₂O ( C14 and C15 ). In the presence of excessive amounts of methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), all half‐titanocene complexes showed high catalytic activities for ethylene polymerization. The substituents on the Cp groups affected the catalytic behaviors of the complexes significantly, with less substituents favoring increased activities and higher molecular weights of the resultant polyethylenes. Effects of reaction conditions on catalytic behaviors were systematically investigated with catalytic systems of mononuclear C1 and dimeric C14 . With C1 /MAO, large MAO amount significantly increases the catalytic activity, while the temperature only has a slight effect on the productivity. In the case of C14 /MAO catalytic system, temperature above 60 °C and Al/Ti value higher than 5000 were necessary to observe good catalytic activities. In both systems, higher reaction temperature and low cocatalyst amount gave the polyethylenes with higher molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3396–3410, 2008     

N‐Functionalized Ferrocenes: Subvalent Group XIV Element Chlorides and tert‐Butyllithium‐Induced C−C Bond Cleavage under Mild Conditions

The ferrocene derivative (η⁵‐Cp)Fe{η⁵‐C₅H₃‐1‐(ArNCH)‐2‐(CH₂NMe₂)} ( 1 ; Ar=2,6‐iPr₂C₆H₃)) reacts diastereoselectively with LiR by carbolithiation and subsequent hydrolysis to give (η⁵‐Cp)Fe{η⁵‐C₅H₃‐1‐(ArHNCHR)‐2‐(CH₂NMe₂)} ( 3 : R=tBu; 4 : R=Ph; 5 : R=Me) in high yields. For R=tBu, the organolithium derivative (η⁵‐Cp)Fe{η⁵‐C₅H₃‐1‐(ArLiNCHR)‐2‐(CH₂NMe₂)} ( 2 ) was isolated. Compound 2 reacts with GeCl₂?dioxane and SnCl₂ to give the metallylene amide chlorides (η⁵‐Cp)Fe{η⁵‐C₅H₃‐1‐(ArMNCHtBu)‐2‐(CH₂NMe₂)} 6 (M=GeCl) and 7 (M=SnCl), respectively, which each contain three stereogenic centers. The potential of 7 as a ligand in transition‐metal chemistry is demonstrated by formation of its complex (η⁵‐Cp)Fe{η⁵‐C₅H₃‐1‐(ArMNCHtBu)‐2‐(CH₂NMe₂)} [ 9 , M= Sn(Cl)W(CO)₅]. Treatment of 3 with tert‐butyllithium at room temperature causes an unprecedented carbon–carbon bond cleavage whereas under kinetic control, lithiation at the Cp‐3 position takes place, which leads to the isolation of (η⁵‐Cp)Fe{η⁵‐C₅H₃‐1‐(ArHNCHtBu)‐2‐(CH₂NMe₂)‐3‐SiMe₃} ( 10 ).     

Dreiecksdodekaedrische Heterotri‐ und ‐tetrametall‐Eisen–Ruthenium‐Cluster mit CpR‐ und Pn‐Liganden (n = 5, 4)

Triangulated Dodecahedral Heterotrimetallic‐ and ‐tetrametallic Iron–Ruthenium Clusters with Cp^R and P_n Ligands (n = 5, 4) The cothermolysis of [Cp*Fe(η⁵‐P₅)] ( 1 ) and [{Cp″(OC)₂Ru}₂](Ru–Ru) ( 2 ), Cp″ = C₅H₃But₂‐1,3, affords low yields of [Cp″Ru(η⁵‐P₅)] ( 3 ) and [{Cp″Ru}₂P₄] ( 4 ) as well as the triangulated dodecahedral hetero‐ and homotrimetallic clusters [{Cp″Ru}₂{Cp*Fe}P₅] ( 5 ), [{Cp″Ru}₃P₅] ( 6 ), [{Cp*Fe}₂{Cp″Ru}P₅] ( 7 ) and the tetranuclear compound [{Cp″Ru}₃{Cp*Fe}P₄] ( 8 ). X‐ray crystallographic studies show that the P₅ ligand in the distorted M₂M′P₅‐triangulated dodecahedra of 5 and 7 offers an unusual novel coordination mode derived from the educt 1 .     

Temperature‐Induced Structure Reconstruction to Prepare a Thermally Stable Single‐Atom Platinum Catalyst

Single‐atom noble metals on a catalyst support tend to migrate and agglomerate into nanoparticles owing to high surface free energy at elevated temperatures. Temperature‐induced structure reconstruction of a support can firmly anchor single‐atom Pt species to adapt to a high‐temperature environment. We used Mn₃O₄ as a restructurable support to load single‐atom Pt and further turned into single‐atom Pt‐on‐Mn₂O₃ catalyst via high‐temperature treatment, which is extremely stable under calcination conditions of 800 °C for 5 days in humid air. High‐valence Pt⁴⁺ with more covalent bonds on Mn₂O₃ are essential for anchoring isolated Pt atoms by strong interaction. An optimized catalyst formed by moderate H₂O₂ etching exhibits the best performance and excellent thermal stability of single‐atom Pt in high‐temperature CH₄ oxidation on account of more exposed Pt atoms and strong Pt‐Mn₂O₃ interaction.     

Copolymerization behavior of titanium imidazolin‐2‐iminato complexes

Monocyclopentadienyl titanium imidazolin‐2‐iminato complexes [Cp′Ti(L)X₂] 1a (Cp′ = cyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), 1b (X = CH₃); 2 (Cp′ = cyclopentadienyl, L = 1,3‐diisopropylimidazolin‐2‐imide, X = Cl); 3 (Cp′ = tert‐butylcyclopentadienyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide, X = Cl), upon activation with methylaluminoxane (MAO) were active for the polymerization of ethylene and propylene and the copolymerization of ethylene and 1‐hexene. Catalysts derived from imidazolin‐2‐iminato tropidinyl titanium complex 4 = [(Trop)Ti(L)Cl₂] (Trop = tropidinyl, L = 1,3‐di‐tert‐butylimidazolin‐2‐imide) were much less active. Narrow polydispersities were observed for ethylene and propylene polymerization, but the copolymerization of ethylene/hexene led to bimodal molecular weight distributions. The productivity of catalysts derived from the dialkyl complex 1b activated with [Ph₃C][B(C₆F₅)₄] or B(C₆F₅)₃ were less active for ethylene/hexene copolymerization but yielded ethylene/hexene copolymers of narrower molecular weight distributions than those derived from 1a/MAO. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6064–6070, 2008