Large‐Scale Synthesis of MOF‐Derived Superporous Carbon Aerogels with Extraordinary Adsorption Capacity for Organic Solvents

Carbon aerogels (CAs) with 3D interconnected networks hold promise for application in areas such as pollutant treatment, energy storage, and electrocatalysis. In spite of this, it remains challenging to synthesize high‐performance CAs on a large scale in a simple and sustainable manner. We report an eco‐friendly method for the scalable synthesis of ultralight and superporous CAs by using cheap and widely available agarose (AG) biomass as the carbon precursor. Zeolitic imidazolate framework‐8 (ZIF‐8) with high porosity is introduced into the AG aerogels to increase the specific surface area and enable heteroatom doping. After pyrolysis under inert atmosphere, the ZIF‐8/AG‐derived nitrogen‐doped CAs show a highly interconnected porous mazelike structure with a low density of 24 mg cm^?3, a high specific surface area of 516 m² g^?1, and a large pore volume of 0.58 cm^?3 g^?1. The resulting CAs exhibit significant potential for application in the adsorption of organic pollutants.     

Ionic electro-active polymer actuator based on cobalt-containing nitrogen-doped carbon/conducting polymer soft electrode

Nanoscale cobalt-containing nitrogen-doped porous carbon (CoNC) materials were prepared by thermolysis of a zeolitic imidazolate framework (ZIF), ZIF-67, at different temperatures and their application for ionic electro-active polymer (EAP) actuator was evaluated. CoNC-700, which was obtained from ZIF-67 pyrolysis at 700 °C, exhibits specific surface area of 753.86 m² g⁻¹, pore volume of 0.5768 cm³ g⁻¹, and specific capacitance of 120.7 F∙g⁻¹. CoNC/conducting polymer soft electrode were fabricated by unitizing effective interaction of CoNC with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). High-performance ionic actuators were developed for the first time using this CoNC/PEDOT:PSS soft electrode. The developed ionic EAP actuator exhibited large peak-to-peak displacement of 20.4 mm and high bending strain of 0.28% (3 V and 0.1 Hz). Therefore, ZIFs or metal organic frameworks (MOFs) can be applied to provide significant improvements in EAP actuators, which can play key roles as technological advances toward bioinspired actuating devices required for next-generation soft and wearable electronics.     

Electrophoretic Deposition of Binder-Free MOF-Derived Carbon Films for High-Performance Microsupercapacitors

Recently, miniaturized power supplies have become essential components of micro-electromechanical systems (MEMS) and portable microdevices due to their high-power density, moderate specific energy, and superior long-term cyclability. In this study, microsupercapacitors with ZIF-8-derived carbons as active materials were successfully fabricate by electrophoretic deposition method. The carbon materials on microsupercapacitors, which are directly deposited or obtained by pyrolyzing predeposited ZIF-8 particles, play a crucial role in achieving outstanding electrochemical performances. The microsupercapacitor of 16 interdigital finger electrodes, prepared by electrophoretic deposition of ZIF-8 particles and subsequent pyrolysis, shows maximum specific power 687.6 mW cm⁻³, specific energy 2.87 mWh cm⁻³, and 97.8 % capacitance retention rate after 10 000 cycles. The simple and facile process of electrophoretic deposition and subsequent pyrolysis of ZIF-8 particles generates a film of densely populated microporous carbon particles on microsupercapacitor, leading to superior capacitive performances.     

Gels dried under supercritical and ambient conditions: a comparative study and their subsequent conversion to silica–carbon composite aerogels

In present work, we have prepared gels with various compositions of methyltrimethoxysilane—3-(2,3-epoxypropoxy) propyltrimethoxysilane (MTMS-GPTMS) using a two-step acid base sol–gel process. To make a comparative study between the two common drying routes, we prepared gels under supercritical and also under ambient conditions. The density of the supercritically dried hybrid aerogels lies between 0.18 and 0.31 gcm^?3, while the density of the ambient dried ones ranges between 0.35 and 0.42 gcm^?3. The surface area of MTMS-0.25 GPTMS aerogel dried under supercritical conditions, has been found to be 464 m² g^?1 with a pore volume and average pore diameter of 1.24 cm³ g^?1 and 11 nm respectively. The same composition dried under ambient conditions is found to have similar properties i.e. a BET surface area of 439 m² g^?1, pore volume of 1.22 cm³ g^?1 and average pore diameter of 11 nm. The aerogels were later pyrolyzed yielding silica/carbon composite aerogels. The pyrolized aerogels possessed a surface area as high as 207 m² g^?1 with a total pore volume of 0.98 cm³ g^?1. The pyrolysed aerogels were also calcined to yield carbon free materials.     

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

In this work, we proposed a facile one-pot pyrolysis method to conveniently manufacture lignin-derived carbon materials with graded porous construction for use in supercapacitors. The renewable lignin was selected as precursor, while the potassium citrate was used as a pore-forming agent. The properties of the prepared lignin-derived carbon (LAC) and the performance for supercapacitor application were thoroughly evaluated. The LAC at optimal preparation conditions shows a layered porous structure with a large specific surface area of 3174 cm² g⁻¹ and pore volume of 2.796 cm³ g⁻¹, where the specific capacitance reach to 241 F g⁻¹ at 1 A g⁻¹ scan rate in 6 M KOH electrolyte solution. At the same time, the specific capacitance remains at 220 F g⁻¹ even at an excessive scan velocity of 20 A g⁻¹, while the capacitance retention is still close to 91.3%. The capacitance retention rate is stable above 95% after 10,000 charge/discharge cycles, which shows the desired long-time stability. All these results demonstrate the outstanding properties of the new prepared LAC material and the considerable application potential in the field of electrical energy storage.     

A ZIF-8 Host for Dendrite-Free Zinc Anodes and N,O Dual-doped Carbon Cathodes for High-Performance Zinc-Ion Hybrid Capacitors

Zn is a promising anode for aqueous energy storage owing to it intrinsic superior properties such as large capacity, abundant reserves, low potential and safety. But, the growth of dendrites during charge and discharge leads to a decrease in reversibility. In addition, further development of zinc-ion hybrid capacitors (ZICs) is seriously challenging because of the lack of an exceptional cathode. Herein, we use ZIF-8 annealed at 500 °C (annealed ZIF-8) as a host material for stable and dendrite-free Zn anodes. Utilization of annealed ZIF-8 results in dendrite-free Zn deposition and stripping as a result of its porous construction, which contains trace Zn. Furthermore, we firstly proposed innovative N,O dual-doped carbon which was designed by the derived ZIF-8 (ZIF-8 derived C) as cathode for high-energy and power-density ZICs. The new ZIC assembled by Zn@annealed ZIF-8 anode and ZIF-8 derived C cathode provides a capacity of 135.5 mAh g⁻¹ and an energy density of 108.4 Wh kg⁻¹ with a power density of 800 W kg⁻¹ at 1.0 A g⁻¹. In addition, it shows outstanding cycling stability of 91% capacity retention after 6000 cycles at 5.0 A g⁻¹. Moreover, the solid-state ZICs can drive LEDs and smart watches. This ZIC holds promise for the practical application of supercapacitors.     

A High Efficient Electrocatalytic Activity of Metal-organic Frameworks ZnO/Ag/ZIF-8 Nanocomposite for Electrochemical Detection of Toxic Heavy Metal Ions

A novel electrochemical sensor on ZIF-8 nanocomposites (Ag/ZnO/ZIF-8) was developed to analyze the mercury ions (Hg²⁺). The ZIF-8 materials are one of the 3-dimensional porous metal-organic frameworks with highly accessible pores and great surface area. The ZIF-8 nanocomposites were prepared through simple sol-gel methods and their physio-chemical properties were characterized via different analytical analyses. As a result of cyclic voltammetry, Ag/ZnO/ZIF-8 exhibited a better electrocatalytic behavior towards the detection of mercury ions (Hg²⁺). Furthermore, the composite modified electrode was then inspected as a sensor for DPV detection of mercury ions. The nanocomposite sensor performed a wide linear range from 0.5 μM to 140 μM with a low detection limit of 40 nM, and high sensitivity of 56.06 μA μM⁻¹ cm⁻². Moreover, the ZIF-8 composite sensor showed a higher selectivity toward the detection of mercury ions (Hg²⁺). The real-time applications of the ZIF-8 composites sensor were inspected in various samples with good sensitivity.     

Polymerization under Hypersaline Conditions: A Robust Route to Phenolic Polymer‐Derived Carbon Aerogels

Polymer‐derived carbon aerogels can be obtained by direct polymerization of monomers under hypersaline conditions using inorganic salts. This allows for significantly increased mechanical robustness and avoiding special drying processes. This concept was realized by conducting the polymerization of phenol–formaldehyde (PF) in the presence of ZnCl₂ salt. Afterwards, the simultaneous carbonization and foaming process conveniently converts the PF monolith into a foam‐like carbon aerogel. ZnCl₂ plays a key role, serving as dehydration agent, foaming agent, and porogen. The carbon aerogels thus obtained are of very low density (25 mg cm^?3), high specific surface area (1340 m² g^?1), and have a large micro‐ and mesopore volume (0.75 cm³ g^?1). The carbon aerogels show very promising potential in the separation/extraction of organic pollutants and for energy storage.     

Flower-like NiCo-carbonate Hydroxides for High-performance Solid-state Hybrid Supercapacitor

Compared to the traditional transition metal layered double hydroxides, transition metal layered carbonate double hydroxides (TMC-LDHs) possess superior electrochemical performance in theory. But TMC-LDHs have not received its deserved attention, especially for application in the energy storage field. In this work, a flower-like TMC-LDH (Ni_0.75Co_0.25(CO₃)_0.125(OH)₂, NCCO) material was successfully prepared by hydrothermal method, which exhibits a high specific capacity of 306.8 mAh g⁻¹ (0.52 mAh cm⁻²) at 0.5 A g⁻¹ with capacity retention of 70.5 % after 2000 cycles. The solid-state hybrid supercapacitor device NCCO//PVA/KOH//IHPC based on the prepared NCCO material and an interconnected hierarchical porous carbon (IHPC) delivers a high specific energy of 50.96 Wh kg⁻¹ at a specific power of 1.06 kW kg⁻¹, and a high specific energy of 36.39 Wh kg⁻¹ still can be delivered at a high specific power of 10.49 kW kg⁻¹. More than 181.2 % of initial specific capacity is retained after 12000 cycles. The specific energy, energy retention under large specific power, and the cycle stability of the assembled device are better than most of the solid-state hybrid supercapacitors that have been reported. These results demonstrate the promising prospect of the TMC-LDH material in the practical application in advanced solid-state supercapacitors.     

Three‐Dimensional Nitrogen‐Doped Hierarchical Porous Carbon as an Electrode for High‐Performance Supercapacitors

A facile and sustainable procedure for the synthesis of nitrogen‐doped hierarchical porous carbons with a three‐dimensional interconnected framework (NHPC‐3D) was developed. The strategy, based on a colloidal crystal‐templating method, utilizes nitrogenous dopamine as the precursor due to its unique properties, including self‐polymerization under mild alkaline conditions, coating onto various surfaces, a high carbonization yield, and well‐preserved nitrogen doping after heat treatment. The obtained NHPC‐3D possesses a high surface area of 1056 m² g^?1, a large pore volume of 2.56 cm³ g^?1, and a high nitrogen content of 8.2 wt %. The NHPC‐3D is implemented as the electrode material of a supercapacitor and exhibits a specific capacitance as high as 252 F g^?1 at a current density of 2 A g^?1. The device also shows a high capacitance retention of 75.7 % at a higher current density of 20 A g^?1 in aqueous electrolyte due to a sufficient surface area for charge accommodation, reversible pseudocapacitance, and minimized ion‐transport resistance, as a result of the advantageous interconnected hierarchical porous texture. These results showcase NHPC‐3D as a promising candidate for electrode materials in supercapacitors.     

Boosting Supercapacitor Performance of Graphene by Coupling with Nitrogen-Doped Hollow Carbon Frameworks

Graphene as a suitable electrode has been extensively used for electrochemical double-layer capacitors based on its excellent properties, including high electrical conductivity and large specific surface area. However, one of the drawbacks is the unavoidable stacking tendency between the graphene nanosheets, resulting in limited electrochemically specific surface area. Herein, novel graphene nanosheets supported by hollow nitrogen-doped carbon frameworks derived from ZIF-8 (GPNC) were fabricated through a simple polyethyleneimine (PEI)-assisted pyrolysis strategy, to boost capacitance performance. Benefiting from the unique scaffold/support role of hollow nitrogen-doped carbon frameworks within the graphene interlayer, the GPNC with a large specific surface area, along with ample micropore/mesopore channels and high nitrogen content, is capable of facilitating electron and electrolyte ion migration kinetics and enhancing intrinsic electrochemical activity. Thus, the GPNC exhibits the highest charge storage of 218 F g⁻¹ and superior rate capability of 74 % when the current density increased from 0.5 to 20 Ag⁻¹ in comparison to pristine graphene and common ZIF-derived carbon/graphene electrodes. The assembled GPNC//GPNC two-electrode system further delivers a maximum power of 9080 Wkg⁻¹ with outstanding electrochemical retention of 84 % over 10 000 cycles.     

Large Scale Synthesis of Three-dimensional Hierarchical Porous Framework with High Conductivity and its Application in Lithium Sulfur Battery

Quick capacity loss due to the polysulfide shuttle effects and poor rate performance caused by low conductivity of sulfur have always been obstacles to the commercial application of lithium sulfur batteries. Herein, an in-situ doped hierarchical porous biochar materials with high electron-ion conductivity and adjustable three-dimensional (3D) macro-meso-micropore is prepared successfully. Due to its unique physical structure, the resulting material has a specific surface area of 2124.9 m² g⁻¹ and a cumulative pore volume of 1.19 cm³ g⁻¹. The presence of micropores can effectively physically adsorb polysulfides and mesopores ensure the accessibility of lithium ions and active sites and give the porous carbon material a high specific surface area. The large pores provide channels for the storage of electrolyte and the transmission of ions on the surface of the substrate. The combined effect of these three kinds of pores and the N doping formed in-situ can effectively promote the cycle and rate performance of the battery. Therefore, prepared cathode can still reach a reversible discharge capacity of 616 mAh g⁻¹ at a rate of 5 C. After 400 charge–discharge cycles at 1 C, the reversible capacity is maintained at 510.0 mAh g⁻¹. This new strategy has provided a new approach to the research and industrial-scale production of adjustable hierarchical porous biochar materials.     

In Situ Growth of Hierarchical Ni-Mn-O Solid Solution on a Flexible and Porous Ni Electrode for High-Performance All-Solid-State Asymmetric Supercapacitors

To endow all-solid-state asymmetric supercapacitors with high energy density, cycling stability, and flexibility, we design a binder-free supercapacitor electrode by in situ growth of well-distributed broccoli-like Ni_0.75Mn_0.25O/C solid solution arrays on a flexible and three-dimensional Ni current collector (3D-Ni). The electrode consists of a bottom layer of compressed but still porous Ni foam with excellent flexibility and high electrical conductivity, an intermediate layer of interconnected Ni nanoparticles providing a large specific surface area for loading of active substances, and a top layer of vertically aligned mesoporous nanosheets of a Ni_0.75Mn_0.25O/C solid solution. The resultant 3D-Ni/Ni_0.75Mn_0.25O/C cathode exhibits a specific capacitance of 1657.6 mF cm⁻² at 1 mA cm⁻² and shows no degradation of the capacitance after 10 000 cycles at 3 mA cm⁻². The assembled 3D-Ni/Ni_0.75Mn_0.25O/C//activated carbon asymmetric supercapacitor has a high specific capacitance of 797.7 mF cm⁻² at 2 mA cm⁻² and an excellent cycling stability with 85.3 % of capacitance retention after 10 000 cycles at a current density of 3 mA cm⁻². The energy density and power density of the asymmetric supercapacitor are up to 6.6 mW h cm⁻³ and 40.8 mW cm⁻³, respectively, indicating a fairly promising future of the flexible 3D-Ni/Ni_0.75Mn_0.25O/C electrode for efficient energy storage applications.     

A Carbocationic Triarylmethane-Based Porous Covalent Organic Network

A thermally stable carbocationic covalent organic network (CON), named RIO-70 was prepared from pararosaniline hydrochloride, an inexpensive dye, and triformylphloroglucinol in solvothermal conditions. This nanoporous organic material has shown a specific surface area of 990 m² g⁻¹ and pore size of 10.3 Å. The material has CO₂ uptake of 2.14 mmol g⁻¹ (0.5 bar), 2.7 mmol g⁻¹ (1 bar), and 6.8 mmol g⁻¹ (20 bar), the latter corresponding to 3 CO₂ molecules adsorbed per pore per sheet. It is shown to be a semiconductor, with electrical conductivity (σ) of 3.17×10⁻⁷ S cm⁻¹, which increases to 5.26×10⁻⁴ S cm⁻¹ upon exposure to I₂ vapor. DFT calculations using periodic conditions support the findings.     

Carbon Aerogels Supported Pt Nanoparticles as Electrocatalysts for Methanol Oxidation in Alkaline Media

Carbon aerogels (CAs) were prepared by sol‐gel polycondensation of resorcinol and formaldehyde with BET surface area of 616 m² g^?1 and the average pore size of 9.8 nm. The prepared CAs were used as supports for Pt nanoparticles for methanol oxidation in alkaline media. In comparison with Pt supported on commercial Vulcan XC‐72R carbon (Pt/C) electrocatalysts, Pt supported on CAs (Pt/CAs) electrocatalysts exhibited higher peak current density and more negative onset potential toward methanol oxidation. The effects of different parameters such as NaOH concentration, methanol concentration, and scan rate on the methanol oxidation reaction were investigated in detail. The results showed that the Pt/CAs electrocatalysts had promising application for methanol oxidation in alkaline media.     

Facile ordered ZnCo2O4@MnO2 nanosheet arrays for superior-performance supercapacitor electrode

Constructing ZnCo₂O₄ nanosheet arrays (NSAs)@MnO₂ nanosheets core-shell nanostructures directly on the current collector (Ni foam) was successfully realized via hydrothermal process and heat treatment. The whole surfaces of uniform ZnCo₂O₄ NSAs were covered with well-ordered MnO₂ nanosheets, which make the whole system have a large specific surface area. At a low current density of 2 mA cm⁻², supercapacitor electrode made of ZnCo₂O₄@MnO₂ composite gave rise to a superior specific capacity about 929.2 C g⁻¹. Although at an ultrahigh current density of 40 mA cm⁻², it still kept a satisfactory specific capacity about 751.1 C g⁻¹, and retained ∼95.75% of the capacity even after 5000 cycles. Because of the synergistic effect between ZnCo₂O₄ and MnO₂ and the great surface area of the system with the special core-shell structure, ZnCo₂O₄@MnO₂ composite has the excellent rate performance, considerable capacity, and quite good cycle performance, which make it a candidate for a new generation of superior-performance electrochemical supercapacitors.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

Manganese Oxide/Graphene Aerogel Composites as an Outstanding Supercapacitor Electrode Material

Graphene aerogels (GA), prepared with an organic sol–gel process, possessing a high specific surface area of 793 m² g^?1, a high pore volume of 3 cm³ g^?1, and a large average pore size of 17 nm, were applied as a support for manganese oxide for supercapacitor applications. The manganese oxide was electrochemically deposited into the highly porous GA to form MnO₂/GA composites. The composites, at a high manganese oxide loading of 61 wt. %, exhibited a high specific capacitance of 410 F g^?1 at 2 mV s^?1. More importantly, the high rate specific capacitances measured at 1000 mV s^?1 for these composites were two‐fold higher than those obtained with samples prepared in the absence of the GA support. The specific capacitance retention ratio, based on the specific capacitance obtained at 25 mV s^?1, was maintained high, at 85 %, even at the high scan rate of 1000 mV s^?1, in contrast with the significantly lower value of 67 % for the plain manganese oxide sample. For the cycling stability, the specific capacitance of the composite electrode decayed by only 5 % after 50,000 cycles at 1000 mV s^?1. The success of this MnO₂/GA composite may be attributed to the structural advantages of high specific surface areas, high pore volumes, large pore sizes, and three‐dimensionally well‐connected network of the GA support. These structural advantages made possible the high mass loading of the active material, manganese oxide, large amounts of electroactive surfaces for the superficial redox events, fast mass‐transfer within the porous structure, and well‐connected conductive paths for the involved charge transport.     

When High-Temperature Cesium Chemistry Meets Self-Templating: Metal Acetates as Building Blocks of Unusual Highly Porous Carbons

Self-templating is a facile strategy for synthesizing porous carbons by direct pyrolysis of organic metal salts. However, the method typically suffers from low yields (<4%) and limited specific surface areas (SSA<2000 m² g⁻¹) originating from low activity of metal cations (e.g., K⁺ or Na⁺) in promoting construction and activation of carbon frameworks. Here we use cesium acetate as the only precursor of oxo-carbons with large SSA of the order of 3000 m² g⁻¹, pore volume approaching 2 cm³ g⁻¹, tunable oxygen contents, and yields of up to 15 %. We unravel the role of Cs⁺ as an efficient promoter of framework formation, templating and etching agent, while acetates act as carbon/oxygen sources of carbonaceous frameworks. The oxo-carbons show record-high CO₂ uptake of 8.71 mmol g⁻¹ and an ultimate specific capacitance of 313 F g⁻¹ in the supercapacitor. This study helps to understand and rationally tailor the materials design by a still rare organic solid-state chemistry.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.