Ruthenium‐Catalyzed Direct Asymmetric Reductive Amination of Diaryl and Sterically Hindered Ketones with Ammonium Salts and H2

A Ru‐catalyzed direct asymmetric reductive amination of ortho‐OH‐substituted diaryl and sterically hindered ketones with ammonium salts is reported. This method represents a straightforward route toward the synthesis of synthetically useful chiral primary diarylmethylamines and sterically hindered benzylamines (up to 97 % yield, 93–>99 % ee). Elaborations of the chiral amine products into bioactive compounds and a chiral ligand were demonstrated through manipulation of the removable and convertible ‐OH group.     

Consecutive Intermolecular Reductive Amination/Asymmetric Hydrogenation: Facile Access to Sterically Tunable Chiral Vicinal Diamines and N‐Heterocyclic Carbenes

A highly enantioselective iridium‐ or ruthenium‐catalyzed intermolecular reductive amination/asymmetric hydrogenation relay with 2‐quinoline aldehydes and aromatic amines has been developed. A broad range of sterically tunable chiral N,N′‐diaryl vicinal diamines were obtained in high yields (up to 95 %) with excellent enantioselectivity (up to >99 % ee). The resulting chiral diamines could be readily transformed into sterically hindered chiral N‐heterocyclic carbene (NHC) precursors, which are otherwise difficult to access. The usefulness of this synthetic approach was further demonstrated by the successful application of one of the chiral vicinal diamines and chiral NHC ligands in a transition‐metal‐catalyzed asymmetric Suzuki–Miyaura cross‐coupling reaction and asymmetric ring‐opening cross‐metathesis, respectively.     

Novel benzoferrocenyl chiral ligands: Synthesis and evaluation of their suitability for asymmetric catalysis

Four benzoferrocenyl phosphorus chiral ligands were conveniently prepared in good overall yields. These ligands were found to be stable in solid form and in solution. Two of the four ligands were resolved by chiral HPLC. Unlike a reported bis(phosphino-η⁵-indenyl)iron(II) complex, in which the indenyl ligands undergo ring flipping through an η¹-intermediate, these two ligands were found to be configurationally stable in solution and in solid state. The suitability of these ligands for enantioselective catalysis was assessed in studies on allylic alkylation reactions. When the two less sterically hindered ligands were used, excellent chemical yields were obtained, but the other two more sterically hindered ones gave lower yields. When the two enantiopure ligands were used, enantioselectivity of up to 51% ee was observed. These findings suggest that benzoferrocene derivatives may be used as chiral ligands for asymmetric catalysis.     

New strategies for the synthesis of N-alkylated indoles (Review)

New data, mostly published in the last five years, on methods for the synthesis of N-alkylated indoles both as a result of direct introduction of the alkyl substituent at the nitrogen atom and by construction of the indole heterocyclic system are reviewed. Only examples of indole derivatives containing branched, sterically hindered, and chiral alkyl substituents at the nitrogen atom are discussed.     

Enantioselective Access to 1H‐Isoindoles with Quaternary Stereogenic Centers by Palladium(0)‐Catalyzed C−H Functionalization

A catalytic enantioselective method for the synthesis of chiral 1H‐isoindoles bearing quaternary stereogenic centers is reported. Powered by readily accessible phosphordiamidite ligands, the presented palladium(0)‐catalyzed C?H functionalization uses trifluoroacetimidoyl chlorides as electrophilic components. It delivers previously inaccessible perfluoroalkylated 1H‐isoindoles in high yields and enantioselectivities. The subsequent diastereoselective addition of nucleophiles provides access to densely substituted and sterically hindered isoindolines.     

Ligand-Controlled Site- and Enantioselective Carbene Insertion into Carbon-Silicon Bonds of Benzosilacyclobutanes

We report herein a highly efficient palladium-catalyzed carbene insertion into strained Si−C bonds of benzosilacyclobutanes, which provides an efficient method to access α-chiral silanes. With a sterically hindered ligand, carbene insertion into the C(sp³)−Si bond of benzosilacyclobutanes occurred in excellent site- and enantioselectivity, while C(sp²)−Si bond insertion occurred selectively with less sterically hindered ligands. Reaction mechanism, in particular the roles of the chiral ligands in controlling the site-selectivity of the insertion reactions, are elucidated by using hybrid density functional theory.     

Facile synthesis of axially chiral styrene-type carboxylic acids via palladium-catalyzed asymmetric C–H activation

A novel method by a one-step introduction of axial chirality and sterically hindered group has been developed for facile synthesis of axially chiral styrene-type carboxylic acids. With the palladium-catalyzed C–H arylation and olefination of readily available cinnamic acid established, this transformation demonstrated excellent yield, excellent stereocontrol (up to 99% yield and 99% ee), and broad substrate scope under mild conditions. The axially chiral styrene-type carboxylic acids produced have been successfully applied to Cp*Co^III-catalyzed asymmetric C–H activation reactions, indicating their potential as chiral ligands or catalysts in asymmetric synthesis.

Palladium-catalyzed asymmetric C–H functionalization to yield axially chiral styrene-type carboxylic acids is described, in which axial chirality and sterically hindered group were incorporated in one-step.     

Asymmetric oxidation of sulfides with H2O2 catalyzed by titanium complexes of Schiff bases bearing a dicumenyl salicylidenyl unit

The sterically hindered Schiff bases (L³–L⁵), prepared from 3,5‐dicumenyl salicylaldehyde and chiral amino alcohols, were used in combination with Ti(OiPr)₄ for asymmetric oxidation of aryl methyl sulfides with H₂O₂ as terminal oxidant. Among the ligands L³–L⁵, L⁴ with a tert‐butyl group in the chiral carbon of the amino alcohol moiety gave the best result with 89% yield and 73% ee for the sulfoxidation of thioanisole under optimal conditions [with 1 mol% of Ti(OiPr)₄ in a molar ratio of 100:1:1.2:120 for sulfide:Ti(OiPr)₄:ligand:H₂O₂ in CH₂Cl₂ at 0 °C for 3 h]. The reaction afforded good yield (84%) with a moderate enantioselectivity (62% ee) even with a lower catalyst loading from 1.0 to 0.5 mol%. The oxidations of methyl 4‐bromophenyl sulfide and methyl 4‐methoxyphenyl sulfide with H₂O₂ catalyzed by the Ti(OiPr)₄–L⁴ system gave 79–84% yields and 54–59% ee of the corresponding sulfoxides in CH₂Cl₂ at 20 °C. The chiral induction capability of the cumenyl‐modified sterically hindered Schiff bases for sulfoxidation was compared with the conventional Schiff bases bearing tert‐butyl groups at the 3,5‐positions of the salicylidenyl unit. Copyright © 2011 John Wiley & Sons, Ltd.     

Atroposelective Total Synthesis of the Fourfold ortho-Substituted Naphthyltetrahydroisoquinoline Biaryl O,N-Dimethylhamatine

A stereoselective total synthesis of O,N-dimethylhamatine, an analogue of an axially chiral naphthylisoquinoline natural biaryl product from tropical Ancistrocladus lianas, is reported. The route features a late-stage atropo-diastereoselective biaryl bond formation. Generation of this especially challenging, sterically hindered tetra-ortho-substituted array was achieved by using Nolan's (IPr*NHC)PdCinCl pre-catalyst under mild Negishi coupling conditions. Discussion is offered regarding the selectivity obtained experimentally and predicted from DFT calculations on the key biaryl coupling step that leads to the desired M-diastereomer.     

HPLC enantioseparation of phenylalanine analogs by application of (S)-N-(4-nitrophenoxycarbonyl)phenylalanine methoxyethyl ester as a new chiral derivatizing agent

Summary The indirect stereochemical resolution of the enantiomers of phenylalanine analogs was studied by high-performance liquid chromatographic methods. The resolution was performed by applying pre-column derivatization with (S)-N-(4-nitrophenoxycarbonyl)phenylalanine methoxyethyl ester, (S)-NIFE, as a new chiral derivatizing agent. Its applicability is demonstrated by the derivatization and separation of a series of ring-and α-methyl-substituted phenylalanines and phenylalanine amides, and especially by the derivatization of sterically hindered, less reactive α-methyl-substituted phenylalanine analogs. The diastereomeric, derivatives produced were separated by reversed-phase high-performance liquid, chromatography. The conditions of both derivatization and separation were optimized. The method described offers good enantioselectivity for various chiral amino compounds derived from chemo-enzymatic processes.     

Promotion of Henry reactions using Cu(OTf)2 and a sterically hindered Schiff base: access to enantioenriched β-hydroxynitroalkanes

The steric and electronic properties of chiral Schiff base ligands derived from cinchona alkaloids were evaluated in asymmetric Henry reactions. Amongst these, the sterically hindered ligand 2 showed outstanding catalytic efficiency in the Cu(II) catalyzed asymmetric addition of nitroalkanes to a variety of aldehydes to afford the desired adducts in high yields (up to 97%) with excellent enantioselectivities (up to 99% ee) and moderate to good diastereoselectivities (up to 84:16 dr).     

Asymmetric Proline‐Catalyzed Addition of Aldehydes to 3H‐Indol‐3‐ones: Enantioselective Synthesis of 2,3‐Dihydro‐1H‐indol‐3‐ones with Quaternary Stereogenic Centers

The proline‐catalyzed addition of various aliphatic aldehydes to sterically hindered 2‐aryl‐substituted 3H‐indol‐3‐ones affords 2,2‐disubstituted 2,3‐dihydro‐1H‐indol‐3‐one derivatives with excellent enantioselectivities. In addition, the synthesis of a chiral derivative, (S)‐2‐(2‐bromophenyl)‐2,3‐dihydro‐2‐(2‐hydroxyethyl)‐1H‐indol‐3‐one, which can be used as an intermediate for the preparation of the natural product hinckdentine A was accomplished with a high level of enantioselectivity.     

Asymmetric,regio‐ and stereo‐selective alternating copolymerization of CO2 and propylene oxide catalyzed by chiral chromium Salan complexes

Chiral chromium complexes of tetradentate N,N′‐disubstituted bis(aminophenoxide) (designated as Salan, a saturated version of Schiff‐base Salen ligand) in conjunction with an ionic quaternary ammonium salt can efficiently catalyze the copolymerization of CO₂ with racemic propylene oxide (rac‐PO) at mild conditions to selectively afford completely alternating poly(propylene carbonate) (PPC) with ～ 95% head‐to‐tail linkages and moderate enantioselectivity. These new catalyst systems predominantly exceed the previously much‐studied SalenCr(III) systems in catalytic activity, polymer enantioselectivity, and stereochemistry control. The chiral diamine backbone, sterically hindered substitute groups on the aromatic rings, and the presence of sp³‐hydridized amino donors and its N,N′‐disubstituted groups in chiral SalanCr(III) complexes all play significant roles in controlling polymer stereochemistry and enantioselectivity. Furthermore, a relationship between polycarbonate enantioselectivity and its head‐to‐tail linkages in relation to regioselective ring‐opening of the epoxide was also discussed on the basis of stereochemical studies of PPCs derived from the copolymerization of CO₂ with chiral PO at various conditions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6102–6113, 2008     

Synthesis of novel “hybrid” structures based on phosphorylacetic acid hydrazides and sterically hindered phenols

Abstract

The insertion of fragments of sterically hindered phenols into the structure of phosphorylacetic acids hydrazides in their reactions with 3,5-di-tert-butyl-4-hydroxybenzylacetates and sterically hindered 2- and 4-hydroxybenzaldehydes has been carried out. The synthesis of 3,5-di-tert-butyl-4-benzyl derivatives of 5-[(diphenylphosphoryl) methyl]-2,4-dihydro-3H-1,2,4-triazol-3-thiones was also carried out.     

Catalyst‐Free Enantiospecific Olefination with In Situ Generated Organocerium Species

Described is the in situ formation of triorganocerium reagents and their application in catalyst‐free Zweifel olefinations. These unique cerium species were generated through novel exchange reactions of organohalides with n‐Bu₃Ce reagents. The adequate electronegativity of cerium allowed for compensating the disadvantages of both usually functional‐group‐sensitive organolithium species and less reactive organomagnesium reagents. Exchange reactions were performed on aryl and alkenyl bromides, enabling enantiospecific transformations of chiral boron pinacol esters. Finally, these new organocerium species were engaged in selective 1,2‐additions onto enolisable and sterically hindered ketones.     

Pyrrolidine–pyridinium based organocatalysts for highly enantioselective Michael addition of cyclohexanone to nitroalkenes

A novel class of pyrrolidine–pyridinium based organocatalysts has been developed and demonstrated to efficiently catalyze the asymmetric Michael addition reactions of unmodified cyclohexanone to nitroalkenes in the ionic liquid BMImBF₄ with up to 95% yield and nearly 100% ee. The catalytic system could be reused for four times and still retained high enantioselectivity. X-ray crystallographic analysis results suggested that a sterically hindered pyridinium moiety on the catalyst played an important role in the chiral induction.     

Synthesis of a novel sterically hindered chiral cyclic phosphoric acid derived from l-tartaric acid and application to the asymmetric catalytic Biginelli reaction

A novel sterically hindered chiral cyclic phosphoric acid derived from l-tartaric acid was designed and synthesized based on highly regioselective cyclosulfitation of chiral 1,1,4,4-tetraphenylbutanetetraol. The asymmetric Biginelli reaction catalyzed by this newly synthesized chiral phosphoric acid was examined, and enantioselectivities up to 99% ee was obtained.     

Double axially chiral bisphosphorylimides as novel Brønsted acids in asymmetric three-component Mannich reaction

A double axially chiral bisphosphorylimide has been demonstrated to be an efficient and highly sterically hindered Brønsted acid in asymmetric three-component Mannich reactions. Optically active syn-β-amino ketones were obtained in high yields (up to 99%) with excellent diastereoselectivity (99:1) and enantioselectivity (up to 99% ee). A gram-scale reaction was also performed to prove the synthetic application value of this reaction.     

Diastereoselectivity of Chiral Nitrone 1,3-Dipolar Cycloaddition to <Emphasis Type="Italic">Baylis-Hillman</Emphasis> Adducts

Summary. 1,3-Dipolar cycloadditions of chiral nitrones to Baylis-Hillman adducts (-hydroxy--methylene esters) proceed with complete regioselectivity in good yields to afford the corresponding diastereomeric 3,5,5-trisubstituted isoxazolidines. Attack of the dipole from the less sterically hindered side of the dipolarophiles affords C-3/C-5 cis isoxazolidines as the predominant isomers. The strong preference for the C-3/C-5 cis isoxazolidines provided more sterically demanding O-tert-butyldimethylsilylsubstituted nitrone 2. Addition of Lewis acids accelerates the reaction and increases the portion of C-3/C-5 trans isoxazolidines. Microwave irradiation accelerates the reaction, but it produces only a small effect on the diastereoisomeric product ratio.     

Enantioselective Synthesis of 3,4‐Dihydropyran‐2‐ones by Domino Michael Addition and Lactonization with New Asymmetric Organocatalysts: Cinchona‐Alkaloid‐Derived Chiral Quaternary Ammonium Phenoxides

Chiral quaternary ammonium phenoxides were readily prepared from commercially available cinchona alkaloids and proved to be useful new asymmetric organocatalysts. Among various chiral quaternary ammonium phenoxides, a cinchonidine‐derived catalyst that bears both a sterically hindered N1‐9‐anthracenylmethyl group and a strongly electron withdrawing 9‐O‐3,5‐bis(trifluoromethyl)benzyl group were found to be highly effective for the Michael addition of ketene silyl acetals (derived from phenyl carboxylates) and α,β‐unsaturated ketones followed by lactonization. Optically active 3,4‐dihydropyran‐2‐one derivatives were obtained in high yields with excellent control of enantio‐ and diastereoselectivity. This catalyst can be handled in air and stored at room temperature in a sealed bottle without decomposition for at least one month.