Iridium‐Catalyzed Silylation of Five‐Membered Heteroarenes: High Sterically Derived Selectivity from a Pyridyl‐Imidazoline Ligand

The steric effects of substituents on five‐membered rings are less pronounced than those on six‐membered rings because of the difference in bond angles. Thus, the regioselectivities of reactions of five‐membered heteroarenes that occur with selectivities dictated by steric effects, such as the borylation of C?H bonds, have been poor in many cases. We report that the silylation of five‐membered‐ring heteroarenes occurs with high sterically derived regioselectivity when catalyzed by the combination of [Ir(cod)(OMe)]₂ (cod=1,5‐cyclooctadiene) and a phenanthroline ligand or a new pyridyl‐imidazoline ligand that further increases the regioselectivity. The silylation reactions with these catalysts produce high yields of heteroarylsilanes from functionalization at the most sterically accessible C?H bonds of these rings under conditions that the borylation of C?H bonds with previously reported catalysts formed mixtures of products or products that are unstable. The heteroarylsilane products undergo cross‐coupling reactions and substitution reactions with ipso selectivity to generate heteroarenes that bear halogen, aryl, and perfluoroalkyl substituents.     

Iridium‐Catalyzed Sequential Silylation and Borylation of Heteroarenes Based on Regioselective C−H Bond Activation

An iridium‐catalyzed regioselective sequential silylation and borylation of heteroarenes was developed, which represents a rare example of unsymmetrical intermolecular C?H bond difunctionalization through the introduction of two different functionalities during a one‐pot transformation. Although the substrate scope for the dehydrogenative silylation of heteroarenes has been limited mainly to electron‐rich five‐membered rings, the current reaction proceeds with both electron‐rich and electron‐deficient heteroarenes with the aid of heteroatom‐directing C?H bond activation. The regioselectivity of the second borylation was controlled by both steric factors and the electronic effect of the silyl group installed in the first step. In combination with the classic cross‐coupling reaction, this method provides rapid access to multisubstituted heteroarenes.     

A Chiral Nitrogen Ligand for Enantioselective,Iridium‐Catalyzed Silylation of Aromatic C−H Bonds

Iridium catalysts containing dative nitrogen ligands are highly active for the borylation and silylation of C−H bonds, but chiral analogs of these catalysts for enantioselective silylation reactions have not been developed. We report a new chiral pyridinyloxazoline ligand for enantioselective, intramolecular silylation of symmetrical diarylmethoxy diethylsilanes. Regioselective and enantioselective silylation of unsymmetrical substrates was also achieved in the presence of this newly developed system. Preliminary mechanistic studies imply that C−H bond cleavage is irreversible, but not the rate‐determining step.     

A Chiral Nitrogen Ligand for Enantioselective,Iridium‐Catalyzed Silylation of Aromatic C−H Bonds

Iridium catalysts containing dative nitrogen ligands are highly active for the borylation and silylation of C−H bonds, but chiral analogs of these catalysts for enantioselective silylation reactions have not been developed. We report a new chiral pyridinyloxazoline ligand for enantioselective, intramolecular silylation of symmetrical diarylmethoxy diethylsilanes. Regioselective and enantioselective silylation of unsymmetrical substrates was also achieved in the presence of this newly developed system. Preliminary mechanistic studies imply that C−H bond cleavage is irreversible, but not the rate‐determining step.     

Catalyst‐Controlled Regiodivergent CH Borylation of Multifunctionalized Heteroarenes by Using Iridium Complexes

The regiodivergent C?H borylation of 2,5‐disubstituted heteroarenes with bis(pinacolato)diboron was achieved by using iridium catalysts formed in situ from [Ir(OMe)(cod)]₂/dtbpy (cod=1,5‐cyclooctadiene, dtbpy: 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine) or [Ir(OMe)(cod)]₂/2 AsPh₃. When [Ir(OMe)(cod)]₂/dtbpy was used as the catalyst, borylation at the 4‐position proceeded selectively to afford 4‐borylated products in high yields (dtbpy system A). The regioselectivity changed when the [Ir(OMe)(cod)]₂/2 AsPh₃ catalyst was used; 3‐borylated products were obtained in high yields with high regioselectivity (AsPh₃ system B). The regioselectivity of borylation was easily controlled by changing the ligands. This reaction was used in the syntheses of two different bioactive compound analogues by using the same starting material.     

Catalytic borylation of o-xylene and heteroarenes via C–H activation

Iridium and rhodium complexes catalyze the borylation of xylene and different heteroarenes using pinacolborane via C–H activation. Various five-membered heterocycles such as thiophene, pyrrole, thionaphthene, and indole derivatives yield the borylated products in moderate to good yields. In general, the reactions proceed with high selectivity to give borylation ortho to the heteroatom.     

para‐Selective C−H Borylation of (Hetero)Arenes by Cooperative Iridium/Aluminum Catalysis

para ‐Selective C−H borylation of benzamides and pyridines has been achieved by cooperative iridium/aluminum catalysis. A combination of iridium catalysts commonly employed for arene C−H borylation and bulky aluminum‐based Lewis acid catalysts provides an unprecedented strategy for controlling the regioselectivity of C−H borylation to give variously substituted (hetero)arylboronates, which are versatile synthetic intermediates for complex multi‐substituted aromatic compounds.     

Metal-Free C−H Borylation of N-Heteroarenes by Boron Trifluoride

Organoboron compounds are essential reagents in modern C−C coupling reactions. Their synthesis via catalytic C−H borylation by main group elements is emerging as a powerful tool alternative to transition metal based catalysis. Herein, a straightforward metal-free synthesis of aryldifluoroboranes from BF₃ and heteroarenes is reported. The reaction is assisted by sterically hindered amines and catalytic amounts of thioureas. According to computational studies the reaction proceeds via frustrated Lewis pair (FLP) mechanism. The obtained aryldifluoroboranes are further stabilized against destructive protodeborylation by converting them to the corresponding air stable tetramethylammonium organotrifluoroborates.     

Iridium‐Catalyzed,Silyl‐Directed,peri‐Borylation of C−H Bonds in Fused Polycyclic Arenes and Heteroarenes

peri‐Disubstituted naphthalenes exhibit interesting physical properties and unique chemical reactivity, due to the parallel arrangement of the bonds to the two peri‐disposed substituents. Regioselective installation of a functional group at the position peri to 1‐substituted naphthalenes is challenging due to the steric interaction between the existing substituent and the position at which the second one would be installed. We report an iridium‐catalyzed borylation of the C−H bond peri to a silyl group in naphthalenes and analogous polyaromatic hydrocarbons. The reaction occurs under mild conditions with wide functional group tolerance. The silyl group and the boryl group in the resulting products are precursors to a range of functional groups bound to the naphthalene ring through C−C, C−O, C−N, C−Br and C−Cl bonds.     

Remote C−H Olefination of Heterocyclic Biaryls Enabled by Reversibly Bound Templates

Remote C−H functionalization of heterocyclic biaryls will be of great importance in synthesis and medicinal chemistry. Through adjusting the geometric relationship of the directing atom and target C−H bonds, two new catalytic templates have been developed to enable the functionalization of the more hindered ortho-C−H bonds of heterobiaryls bearing directing heteroatom at the meta- or para-positions, affording unprecedented site-selectivity. The use of template chaperone also overcomes product inhibition and renders the directing templates catalytic. The utility of this protocol was demonstrated by olefination of heterocyclic biaryls with various substituents, overriding conventional steric and electronic effects. These ortho-C−H olefinated heterobiaryls are sterically hindered and can often be challenging to prepare through aryl-aryl coupling reactions.     

Synthesis of Chiral Sulfoximines via Iridium-Catalyzed Regio- and Enantioselective C−H Borylation: A Remarkable Sidearm Effect of Ligand

Transition metal-catalyzed enantioselective C−H activation of prochiral sulfoximines for non-annulated products remains a formidable challenge. We herein report iridium-catalyzed enantioselective C−H borylation of N-silyl diaryl sulfoximines using a well-designed chiral bidentate boryl ligand with a bulky side arm. This method is capable of accommodating a broad range of substrates under mild reaction conditions, affording a vast array of chiral sulfoximines with high enantioselectivities. We also demonstrated the synthetic utility on a preparative-scale C−H borylation for diverse downstream transformations, including the synthesis of chiral version of bioactive molecules. Computational studies showed that the bulky side arm of the ligand confers high regio- and enantioselectivity through steric effect.     

Regioselective Borylation of Porphyrins by C?H Bond Activation under Iridium Catalysis to Afford Useful Building Blocks for Porphyrin Assemblies

Highly regioselective and efficient borylation of a variety of porphyrins has been achieved by reaction with bis(pinacolato)diboron through C? H bond activation under iridium catalysis on the basis of the synthetic protocol developed by Miyaura, Hartwig, and Smith. A boryl group can be selectively introduced at sterically uncongested positions in the peripheral aryl groups of porphyrin substrates whose peripheral β‐positions are sterically hindered. Curiously, β substituents adjacent to the aryl group to be borylated have unexpectedly large effects on the regioselectivity, because the iridium catalyst can discriminate between subtle steric differences. Chemoselective borylation was also achieved for several functionalized porphyrins. This borylation protocol can be applied to various monomeric and oligomeric functional porphyrins, hence offering an efficient route to elaborate multiporphyrin‐based molecular constructs.     

Ligand‐Promoted Borylation of C(sp3)?H Bonds with Palladium(II) Catalysts

A quinoline‐based ligand effectively promotes the palladium‐catalyzed borylation of C(sp³) H bonds. Primary β‐C(sp³) H bonds in carboxylic acid derivatives as well as secondary C(sp³) H bonds in a variety of carbocyclic rings, including cyclopropanes, cyclobutanes, cyclopentanes, cyclohexanes, and cycloheptanes, can thus be borylated. This directed borylation method complements existing iridium(I)‐ and rhodium(I)‐catalyzed C H borylation reactions in terms of scope and operational conditions.     

Ligand‐Promoted Borylation of C(sp3)H Bonds with Palladium(II) Catalysts

A quinoline‐based ligand effectively promotes the palladium‐catalyzed borylation of C(sp³)? H bonds. Primary β‐C(sp³)? H bonds in carboxylic acid derivatives as well as secondary C(sp³)? H bonds in a variety of carbocyclic rings, including cyclopropanes, cyclobutanes, cyclopentanes, cyclohexanes, and cycloheptanes, can thus be borylated. This directed borylation method complements existing iridium(I)‐ and rhodium(I)‐catalyzed C? H borylation reactions in terms of scope and operational conditions.     

Sterically Controlled C−H Olefination of Heteroarenes

The regioselective functionalization of heteroarenes is a highly attractive synthetic target due to the prevalence of multiply substituted heteroarenes in nature and bioactive compounds. Some substitution patterns remain challenging: While highly efficient methods for the C2-selective olefination of 3-substituted five-membered heteroarenes have been reported, analogous methods to access the 5-olefinated products have remained limited by poor regioselectivities and/or the requirement to use an excess of the valuable heteroarene starting material. Herein we report a sterically controlled C−H olefination using heteroarenes as the limiting reagent. The method enables the highly C5-selective olefination of a wide range of heteroarenes and is shown to be useful in the context of late-stage functionalization.     

Iridium-Catalyzed ortho-Selective Borylation of Aromatic Amides Enabled by 5-Trifluoromethylated Bipyridine Ligands

Iridium-catalyzed borylations of aromatic C−H bonds are highly attractive transformations because of the diversification possibilities offered by the resulting boronates. These transformations are best carried out using bidentate bipyridine or phenanthroline ligands, and tend to be governed by steric factors, therefore resulting in the competitive functionalization of meta and/or para positions. We have now discovered that a subtle change in the bipyridine ligand, namely, the introduction of a CF₃ substituent at position 5, enables a complete change of regioselectivity in the borylation of aromatic amides, allowing the synthesis of a wide variety of ortho-borylated derivatives. Importantly, thorough computational studies suggest that the exquisite regio- and chemoselectivity stems from unusual outer-sphere interactions between the amide group of the substrate and the CF₃-substituted aryl ring of the bipyridine ligand.     

Electrochemical C−H Amidation of Heteroarenes with N-Alkyl Sulfonamides in Aqueous Medium

The construction of C−N bonds by free radical reactions represents a powerful synthetic approach for direct C−H amidations of arenes or heteroarenes. Developing efficient and more environmentally friendly synthetic methods for C−H amidation reactions remains highly desirable. Herein, metal-free electrochemical oxidative dehydrogenative C−H amidations of heteroarenes with N-alkylsulfonamides have been accomplished. The catalyst- and chemical-oxidant-free C−H amidation features an ample scope and employs electricity as the green and sole oxidant. A variety of heteroarenes, including indoles, pyrroles, benzofuran and benzothiophene, thereby underwent this C(sp²)−H nitrogenation. Cyclic voltammetry studies and control experiments provided evidence for nitrogen-centered radicals being directly generated under metal-free electrocatalysis.     

Ruthenium-catalyzed regiospecific borylation of methyl C-H bonds

We report the regiospecific, ruthenium-catalyzed borylation of saturated terminal C-H bonds. Alkylboronates were obtained in 78-98% yields. The borylations of alkanes, trialkylamines, protected alcohols, and fluoroalkanes occurred regiospecifically at the methyl group that is least sterically hindered. In contrast to most organometallic C-H activation, the reactions of alkanes occurred in higher yields than the reactions of arenes. Reactions were conducted that probed steric and electronic effects on the alkyl borylation. These reactions showed that the borylation occurred preferentially at the methyl group that is least sterically hindered and most electron-deficient. Ruthenium compounds containing boryl ligands were synthesized, and one was characterized by X-ray crystallography. One of these compounds contained a rare bridging boryl ligand and served as a catalyst precursor for the borylation of octane.     

Hydrogen Bond Directed ortho‐Selective C−H Borylation of Secondary Aromatic Amides

Reported is an iridium catalyst for ortho‐selective C?H borylation of challenging secondary aromatic amide substrates, and the regioselectivity is controlled by hydrogen‐bond interactions. The BAIPy ‐Ir catalyst forms three hydrogen bonds with the substrate during the crucial activation step, and allows ortho‐C?H borylation with high selectivity. The catalyst displays unprecedented ortho selectivities for a wide variety of substrates that differ in electronic and steric properties, and the catalyst tolerates various functional groups. The regioselective C?H borylation catalyst is readily accessible and converts substrates on gram scale with high selectivity and conversion.     

Electron‐Transfer and Hydride‐Transfer Pathways in the Stoltz–Grubbs Reducing System (KOtBu/Et3SiH)

Recent studies by Stoltz, Grubbs et al. have shown that triethylsilane and potassium tert ‐butoxide react to form a highly attractive and versatile system that shows (reversible) silylation of arenes and heteroarenes as well as reductive cleavage of C−O bonds in aryl ethers and C−S bonds in aryl thioethers. Their extensive mechanistic studies indicate a complex network of reactions with a number of possible intermediates and mechanisms, but their reactions likely feature silyl radicals undergoing addition reactions and S_H2 reactions. This paper focuses on the same system, but through computational and experimental studies, reports complementary facets of its chemistry based on a) single‐electron transfer (SET), and b) hydride delivery reactions to arenes.