Amorphous silicon carbonitride thin‐film coatings produced by remote nitrogen microwave plasma chemical vapour deposition using organosilicon precursor

Amorphous silicon carbonitride (a‐SiCN) films were produced by remote nitrogen plasma chemical vapour deposition (RP‐CVD) from bis(dimethylamino)methylsilane precursor. The effect of substrate temperature (T _S) on the kinetics of RP‐CVD, chemical structure, surface morphology and some properties of the resulting films is reported. The T _S dependence of film growth rate implies that RP‐CVD is an adsorption‐controlled process. Fourier transform infrared spectroscopic examination revealed that an increase in T _S from 30 to 400°C involves the elimination of organic moieties from the film and the formation of Si─C and Si─N network structure. The films were characterized in terms of their surface roughness and basic physical and optical properties, such as density and refractive index, respectively. Reasonably good relationships between the structural parameters represented by relative integrated intensity of infrared absorption bands from the Si─C and Si─N bonds (controlled by T _S) and the film properties are determined. Due to their small surface roughness, high density and high refractive index, the a‐SiCN films produced at T _S ≥ 350°C would seem to be useful protective coatings for metals and optical devices.     

Thermal and mechanical properties of random copolymers of diisopropyl fumarate with 1‐adamantyl and bornyl acrylates with high glass transition temperatures

We report the thermal, optical, and mechanical properties of random copolymers produced by radical copolymerizations of diisopropyl fumarate (DiPF) with 1‐adamantyl acrylate (AdA) and bornyl acrylate (BoA). The effects of a methylene spacer included in the main chain and bulky ester alkyl groups in the side chain on the copolymer properties are discussed. The produced copolymers are characterized by NMR and UV–vis spectroscopies, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis (DMA). The copolymerization rate and the molecular weight of the copolymers increase with an increase in the acrylate content in feed during the copolymerization (M_w = 25–110 × 10³). The onset temperature of decomposition (T_d5) and the glass transition temperature (T_g) of the copolymers also increase according to the content of the acrylate units (T_d5 = 296–329 °C and 281–322 °C, T_g = 80–133 °C and 91–106 °C for the copolymers of DiPF with AdA and BoA, respectively). Transparent and flexible copolymer films are obtained by a casting method and their optical properties such as transparency and refractive indices are investigated (n_D = 1.478–1.479). The viscoelastic data of the copolymers are collected by DMA measurements under temperature control. The storage modulus decreases at a temperature region over the T_g value of the copolymers, depending on the structure and amount of the acrylate units. The sequence structure of the copolymers is analyzed based on monomer reactivity ratios and composition in order to discuss the copolymer properties related to chain rigidity and sequence length distribution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 288–296     

Structural and Optical Properties of Sol-Gel Deposited Proton Conducting Ta2O5 Films

Proton conducting tantalum oxide films were deposited on ITO (Indium Tin Oxide) coated glass, fused silica and soda-lime glass substrates by spin coating using a sol-gel process. The coating solutions were prepared using Ta(OC₂H₅)₅ as a precursor. X-ray diffraction studies determined that the sol-gel films, heat treated at temperatures below 400°C, were amorphous. Films heat treated at higher temperatures were crystalline with the hexagonal δ-Ta₂O₅ structure. The solar transmission values (T _s ) of tantala films on glass generally range from 0.8–0.9, depending on thickness. The refractive index and the extinction coefficient were evaluated from transmittance characteristics in the UV-VIS-NIR regions. The refractive index values calculated at λ=550 nm increased fromn=1.78 to 1.97 with increasing heat treatment from 150 to 450°C. The films heat treated at different temperatures showed low absorption, with extinction coefficients of smaller thank=1×10⁻³ in the visible range. Impedance spectroscopic investigations performed on Ta₂O₅ films revealed that these films have a protonic conductivity of 3.2×10⁻⁴S/m. The films are suitable for proton conducting layers in electrochromic (EC) devices.     

Poly(p-xylene disulfide) and poly(p-xylene tetrasulfide): synthesis,cure and investigation of mechanical and thermophysical properties

Abstract

In this work, two polysulfide polymers were synthesized using aromatic organic monomer (α,α′-dichloro-p-xylene) and sodium disulfide (Na₂S₂) and sodium tetrasulfide (Na₂S₄) aqueous monomers. Then, the curing process of the polymers was carried out at 170° C using a rheometer. The structural characteristics of synthesized and cured samples were identified by Raman and Fourier transform infrared (FT-IR) spectroscopies. Also, morphological and thermophysical properties of samples were studied by using the X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. Moreover, the molecular weight of the synthesized samples was determined by proton nuclear magnetic resonance (¹H NMR). Furthermore, the mechanical properties and hardness of the samples were investigated by tensile test and Shore A. The results showed that in the noncured samples during the increase of sulfur in the polymer structure, solubility was increased whereas it decreased the hardness, melting point (T_m ) and glass transition temperature (T_g ) of polymers. But in cured samples, hardness and T_g increase by increasing sulfur and the mechanical properties also improved. This is due to the increase in crosslinks. Also, Tm and solubility are not observed due to the formation of crosslinks.     

Synthesis and properties of Q‐silicon crosslinked siloxane networks: H3PO4‐catalyzed sol–gel dehydration/crosslinking of α,ω‐bis(hydroxy)oligodimethylsiloxanes with tetrakis(hydroxydimethylsiloxy)silane

Six silicate‐crosslinked oligodimethylsiloxane thin films were prepared by the phosphoric acid (1 mol %) catalyzed condensation of α,ω‐bis(hydroxy)oligodimethylsiloxane (P) and tetrakis(hydroxydimethylsiloxy)silane (Q). Other acid catalysts were evaluated. P and Q were prepared by the Pd‐catalyzed oxidation of the corresponding Si? H compounds with water. The starting materials were characterized by IR and ¹H, ¹³C, and ²⁹Si NMR. A thermal cure was achieved with H₃PO₄ in 24 h and with poly(phosphoric acid) in 3 h at 110–120 °C. Dynamic mechanical analysis was used to determine the glass‐transition temperatures and to evaluate the mechanical properties of the films. Their thermal stabilities (≥300 °C) in air and N₂ were determined by thermogravimetric analysis. Small amounts of non‐crosslinked P were recovered from the films by Soxhlet extractions with CH₂Cl₂ and analyzed by IR, gel permeation chromatography, and ²⁹Si NMR. The crosslink densities were evaluated by the CH₂Cl₂ absorption capacities of the films. The surface properties of the films were determined by static and dynamic contact‐angle measurements. Electrochemical impedance spectroscopy was carried out to evaluate the corrosion‐protective properties of the coatings on mild steel as a function of the exposure time to 0.5 N NaCl. The biofoul‐release properties of the films were evaluated with sporelings from mature Ulva linza plants and barnacles. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2237–2247, 2006     

Synthesis and characterization of perfluoro‐3‐methylene‐2,4‐dioxabicyclo[3,3,0] octane: Homo‐ and copolymerization with fluorovinyl monomers

The synthesis of perfluoro‐3‐methylene‐2,4‐dioxabicyclo[3,3,0] octane (D), its radical homopolymerization, and copolymerization with fluoroolefins are presented. Fluorodioxolane (D) was synthesized through direct fluorination of the corresponding hydrocarbon precursor in a fluorinated solvent by F₂/N₂ gas. It was polymerized in bulk using perfluorodibenzoyl peroxide as the initiator. The resulting homopolymer had a limited solubility in fluorinated solvents, and its glass transition temperature (T_g) was in the range of 180–190 °C. The polymeric films prepared by casting from hot hexafluorobenzene (HFB) solution were transparent with low refractive index (1.329 at 633 nm). These films were thermally stable (T_d > 350 °C), and were hard and brittle. The copolymers of monomer (D) were prepared with fluorovinyl monomers such as chlorotrifluoroethylene (CTFE), perfluoropropyl vinyl ether, perfluoromethyl vinyl ether, and vinylidene fluoride. The kinetics of radical copolymerization of monomer (D) with CTFE led to the assessment of the reactivity ratios of both comonomers: r_D = 3.635 and r_CTFE = 0.737 at 74 °C, respectively. The copolymers obtained were soluble in HFB and perfluoro‐2‐butyltetrahydrofuran, with T_g in the range of 84–145 °C depending on the copolymer composition. The films of the copolymers were flexible and clear with a low refractive index (1.3350–1.3770 at 532 nm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6571–6578, 2009     

Copper‐Rich Thermoelectric Sulfides: Size‐Mismatch Effect and Chemical Disorder in the [TS4]Cu6 Complexes of Cu26T2Ge6S32 (T=Cr,Mo, W) Colusites

Herein, we investigate the Mo and W substitution for Cr in synthetic colusite, Cu₂₆Cr₂Ge₆S₃₂. Primarily, we elucidate the origin of extremely low electrical resistivity which does not compromise the Seebeck coefficient and leads to outstanding power factors of 1.94 mW m^?1 K^?2 at 700 K in Cu₂₆Cr₂Ge₆S₃₂. We demonstrate that the abnormally long iono‐covalent T–S bonds competing with short metallic Cu–T interactions govern the electronic transport properties of the conductive “Cu₂₆S₃₂” framework. We address the key role of the cationic size‐mismatch at the core of the mixed tetrahedral–octahedral complex over the transport properties. Two essential effects are identified: 1) only the tetrahedra that are directly bonded to the [TS₄]Cu₆ complex are significantly distorted upon substitution and 2) the major contribution to the disorder is localized at the central position of the mixed tetrahedral–octahedral complex, and is maximized for x=1, i.e. for the highest cationic size‐variance, σ².     

Bioactivity and mechanical properties of nickel‐incorporated hydrogenated carbon nanocomposite thin films

In this paper, the influence of nickel incorporation on the mechanical properties and the in vitro bioactivity of hydrogenated carbon thin films were investigated in detail. Amorphous hydrogenated carbon (a‐C:H) and nickel‐incorporated hydrogenated carbon (Ni/a‐C:H) thin films were deposited onto the Si substrates by using reactive biased target ion beam deposition technique. The films' chemical composition, surface roughness, microstructure and mechanical properties were investigated by using XPS, AFM, TEM, nanoindentation and nanoscratch test, respectively. XPS results have shown that the film surface is mainly composed of nickel, nickel oxide and nickel hydroxide, whereas at the core is nickel carbide (Ni₃C) only. The presence of Ni₃C has increased the sp² carbon content and as a result, the mechanical hardness of the film was decreased. However, Ni/a‐C:H films shows very low friction coefficient with higher scratch‐resistance behavior than that of pure a‐C:H film. In addition, in vitro bioactivity study has confirmed that it is possible to grow dense bone‐like apatite layer on Ni/a‐C:H films. Thus, the results have indicated the suitability of the films for bone‐related implant coating applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of chromophores and polyimides with a green chemistry approach for second‐order nonlinear optical applications

This article presents the synthesis of nonlinear optical responsive chromophores by adopting a green chemistry approach by coupling N‐methyl‐N‐(2‐hydroxyethyl)‐4‐amino benzaldehyde with barbituric acid, 1,3‐indanedione, and 1,3‐diethyl‐2‐thiobarbituric acid as the acceptors through stilbene linkage. We performed the synthesis in less than 10 minutes at room temperature with water as a solvent without catalyst. Two different side‐chain polyimides were synthesized from poly(hydroxy‐imide)s with chromophores by Mitsunobu reaction. The chromophores were characterized by Fourier transform infrared, ¹H NMR, ¹³C NMR, and elemental analysis. However, the polyimides were characterized by Fourier transform infrared and ¹H NMR. The inherent viscosities (η_inh) of polyimides were determined by Ubbelohde viscometer, which ranged between 0.1793 and 0.1890 dL/g. The molecular weights of the polyimides were determined using gel permeation chromatography and were in range of 23 000 to 26 000. Polyimides demonstrated an excellent solubility in polar aprotic solvents, indicating good processability. Thermal behavior of these polyimides was studied by differential scanning calorimetry and thermogravimetric analysis. The T_g's were in the range of 185°C to 255°C. The change in the molecular orientation in the polymer films after electrical poling was ascertained using ultraviolet‐visible spectrophotometer and atomic force microscopy. The thicknesses and refractive indices of the thin films were determined by an ellipsometer. The second harmonic generation coefficients of the corona‐poled polymer films at T_opt's, determined by the Maker fringe technique, ranged between 59.33 and 77.82 pm/V. High thermal endurance observed for the polyimides is attributed to the extensive hydrogen bonds in the matrix. The developed polyimides showed no decay in second harmonic generation signals below 110°C, indicating the acceptance for nonlinear optical devices.     

Synthesis of a novel DPPA‐containing benzoxazine to flame‐retard epoxy resin with maintained thermal properties

The flame‐retarded epoxy resin with improved thermal properties based on environmentally friendly flame retardants is vital for industrial application. Hereby, a novel reactive‐type halogen‐free flame retardant, 10‐(3‐(4‐hydroxy phenyl)‐3,4‐dihydro‐2H‐benzo[e] [1,3] oxazin‐4‐yl)‐5H‐phenophosphazinine 10‐oxide (DHA‐B) was synthesized via a two‐step reaction route. Its structure was characterized using ¹H, ¹³C, and ³¹P NMR and HRMS spectra. For 4,4′‐diaminodipheny ethane (DDM) and diglycidyl ether of bisphenol A (DGEBA)‐cured systems, the epoxy resin with only 2 wt% loading of DHA‐B passed V‐0 rating of UL‐94 test. Significantly, its glass transition temperature (T_g) and initial decomposition temperature (T_5%) were as high as 169.6°C and 359.6°C, respectively, which were even higher than those of the corresponding original epoxy resin. Besides, DHA‐B decreased the combustion intensity during combustion. The analysis of residues after combustion suggested that DHA‐B played an important role in the condensed phase.     

Amphiphilic silica/fluoropolymer nanoparticles: Synthesis,tem‐responsive and surface properties as protein‐resistance coatings

A series of amphiphilic silica/fluoropolymer nanoparticles of SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) were prepared by silica surface‐initiating atom transfer radical polymerization (SI‐ATRP) of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and poly dodecafluoroheptyl methacrylate (P12FMA). Their amphiphilic behavior, lower critical solution temperature (LCST), and surface properties as protein‐resistance coatings were characterized. The introduction of hydrophobic P(12FMA) block leads SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) to form individual spherical nanoparticles (～150 nm in water and ～170 nm in THF solution) as P(PEGMA)‐b‐P(12FMA) shell grafted on SiO₂ core (～130 nm), to gain obvious lower LCST at 36–52 °C and higher thermostability at 290–320 °C than SiO₂‐g‐P(PEGMA) (LCST = 78–90 °C, T_d = 220 °C). The water‐casted SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) films obtain much rougher surface (125.3–178.4 nm) than THF‐casted films (11.5–16.9 nm) and all SiO₂‐g‐P(PEGMA) films (26.8–31.3 nm). Therefore, the water‐casted surfaces exhibit obvious higher water adsorption amount (Δf = ?494 ～ ?426 Hz) and harder adsorbed layer (viscoelasticity of ΔD/Δf = ?0.28 ～ ?0.36 × 10^?6/Hz) than SiO₂‐g‐P(PEGMA) films, but present loser adsorbed layer than THF‐casted films (ΔD/Δf = ?0.29 ～ ?0.63 × 10^?6/Hz). While, the introduction of P(12FMA) segments does not show obviously reduce in the protein‐repelling adsorption of SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) films (△f = ?15.7 ～ ?22.3 Hz) compared with SiO₂‐g‐P(PEGMA) films (△f = ?8.3 ～ ?11.3 Hz) and no obvious influence on water adsorption of ancient stone. Therefore, SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) is suggested to be used as protein‐resistance coatings. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 381–393     

High-resolution solid-state 13C NMR study of ethylcellulose films

Ethylcellulose films cast from concentrated solutions of chloroform, benzene, and carbon tetrachloride were subjected to the NMR relaxation measurements including ¹H spin-lattice relaxation time (T_1H), rotating-frame ¹H spin-lattice relaxation time (T_1ρH), and ¹³C spin-lattice relaxation time (T_1C). The values of T_1ρH for carbons in the glucose units of ethyl-cellulose were of the same order of magnitude as those reported for the crystalline and noncrystalline regions of ramie cellulose. The values of T_1C for unsubstituted C2, C3 carbons were smaller than those for the corresponding carbons in the noncrystalline region of native celluloses. The T_1C values for unsubstituted C2, C3, and substituted C6 carbons showed a small but definite dependence on the solvent from which the films were cast. © 1993 John Wiley & Sons, Inc.     

Synthesis of stereoregular poly[(2S,3S)-benzyl β-3-methylmalate]

The asymmetric lactone (3 S, 4 R)-3-methyl-4-benzyloxycarbonyl-2-oxetanone ( 6 ) was anionically polymerized to give an insoluble, crystalline, highly isotactic polymer with (2 S, 3 S)-benzyl β-3-methylmalate repeating units. Solubility was achieved by copolymerization of 6 with the recemic (R, S)-butyl malolactonate ( 7 ). The semicrystalline copolymer was characterized (M̄_n = 107 000, T_g = 29,6°C, T_m = 161°C, [α] = 1,5 deg · dm⁻¹ · g⁻¹ · cm³) and its stereosequence investigated by ¹³C NMR.     

Preparation,Tg improvement,and thermal stability enhancement mechanism of soluble poly(methyl methacrylate) nanocomposites by incorporating octavinyl polyhedral oligomeric silsesquioxanes

The soluble poly(methyl methacrylate‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PMMA–POSS) hybrid nanocomposites with improved T_g and high thermal stability were synthesized by common free radical polymerization and characterized using FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA. The POSS contents in the nanocomposites were determined based on FTIR spectrum, revealing that it can be effectively adjusted by varying the feed ratio of POSS in the hybrid composites. On the basis of the ¹H NMR analysis, the number of the reacted vinyl groups on each POSS molecules was determined to be about 6–8. The DSC and TGA measurements indicated that the hybrid nanocomposites had higher T_g and better thermal properties than the pure PMMA homopolymer. The T_g increase mechanism was investigated using FTIR, displaying that the dipole–dipole interaction between PMMA and POSS also plays very important role to the T_g improvement besides the molecular motion hindrance from the hybrid structure. The thermal stability enhances with increase of POSS content, which is mainly attributed to the incorporation of nanoscale inorganic POSS uniformly dispersed at molecular level. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5308–5317, 2007     

1-(2′-Deoxy-β-D-xylofuranosyl)cytosine: Base pairing of oligonucleotides with a configurationally altered sugar-phosphate backbone

Solid-phase synthesis of the oligo(2′-deoxynucleotides) 19 and 20 containing 2′-deoxy-β-D -xylocytidine ( 4 ) is described. For this purpose, 1-(2-deoxy-β-D -threo-pentofuranosyl)cytosine ( = 1-(2-deoxy-β-D -xylofuranosyl)-cytosine; 4 ) was protected at its 4-NH₂ group with a benzoyl (→ 5 ) or an isobutyryl (→ 8 ) residue, and a dimethoxytrityl group was introduced at 5′-OH (→ 7, 10 ; Scheme 2). Compounds 7 and 10 were converted into the 3′-phosphonates 11a,b . While 19 could be hybridized with 21 and 22 under formation of duplexes with a two-nucleotide overhang on both termini ( 19 · 21 : T_m 29°; 19 · 22 : T_m 22°), the decamer 20 bearing four xC_d residues could no longer be hybridized with one of the opposite strands. Moreover, the oligonucleotides d[(xC)₈? C] ( 13 ), d[(xC)₄? C] ( 14 ), d[C? (xC)₄? C] ( 15 ), and d[C? (xC)₃? C] ( 16 ) were synthesized. While 13 exhibits an almost inverted CD spectrum compared to d(C₉) ( 17 ), the other oligonucleotides show CD spectra typical for regular right-handed single helices. At pH 5, d[(xC)₈? C] forms a stable hemi-protonated duplex which exhibits a T_m of 60° (d[(CH⁺)₉] · d(C₉): T_m 36°). The thermodynamic parameters of duplex formation of ( 13H ⁺ · 13 ) and ( 17H ⁺ · 17 ) were calculated from their melting profiles and were found to be identical in ΔH but differ in ΔS ( 13H ⁺ · 13 : ΔS = ?287 cal/K mol; 17H ⁺ · 17 : ΔS = ?172 cal/K mol).     

Incorporation of polydimethylsiloxane into polyurethanes and characterization of copolymers

Novel copolymers of polyurethane (PU) were prepared by direct transurethanetion reaction of a commercial PU with polydimethylsiloxanes (PDMS, MW 1000, 5000, and 10,000) containing hydroxyl end-groups. Transurethanetions with different mass ratios of hydrophobic PDMS to hydrophilic PU chains (PDMS1000–PU: 43:57, 67:33, 71:29, and 80:20; PDMS5000–PU: 37:63, and 51:49; PDMS10000–PU: 51:49) were carried out in solution at 65 and 100 °C. In catalyzed reactions, dibutyltin dilaurate (SnC₃₂H₆₄O₄) was used to promote bond breaking in the PU chain and accelerate the reaction between hydroxyl end-groups of PDMS and regenerated isocyanates of PU. The chemical structures of the prepared copolymers were comprehensively characterized by ¹H, ¹³C, and ²⁹Si NMR spectroscopies. According to elemental analysis, the content of PDMS varied between 3 wt.% and 16 wt.%, and results obtained from the ¹H NMR spectroscopy were in good agreement with the results of elemental analysis. Increased length of the hydrophobic chain increased the content of PDMS in the copolymer. The GPC results showed that molar masses of the PUPDMS copolymers were lower than the molar mass of the starting PU. The glass transitions (T_g) of the copolymers were shifted to lower temperature as compared with T_g of the starting polyurethane. ATR FTIR spectroscopy showed the surface of the copolymer films to be enriched with siloxane groups and, according to electron microscopy, it was textured with microspheres. The static contact angles for copolymer films measured with deionized water ranged from 94° to 117°. The different structural, thermal and surface properties of the PUPDMS copolymers as compared with PU indicated that transurethanetion had taken place.     

Hyperbranched epoxy resins prepared by proton transfer polymerization from an A<Subscript>2</Subscript> + B<Subscript>3</Subscript> system

Epoxy-terminated hyperbranched polymers(EHBPs)were prepared by proton transfer polymerization and characterized by FT-IR,~1H-NMR and GPC.The solution and thermal properties of the uncured samples and mechanical properties of cured samples were examined.The thermo-stable products had good solubility in polar solvents,low solution viscosity and T_gs ranging from 15℃to 33℃depending on their molecular weights.The mechanical properties of cured films were studied and compared with those of a bisphenol-A type epoxy resin.The films of EHBPs had good impact resistance and high gloss values without sacrificing hardness and adhesion.     

Effects of molecular weight of nitrocellulose on structure and properties of polyurethane/nitrocellulose IPNs

Semi‐interpenetrating polymer network (semi‐IPN) coatings were prepared by using castor oil‐based polyurethane (PU) and nitrocellulose (NC) with various viscosity‐average molecular weights (M_η) from 6 × 10⁴ to 42 × 10⁴, and coated on a regenerated cellulose (RC) film to obtain water‐resistant film. The PU/NC coatings and coated films, which were cured at 80°C for 5 min and 2 min, respectively, were investigated by infrared (IR) and ultraviolet (UV) spectroscopy, X‐ray diffraction, swelling test, strength test, dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The results show that the crosslink densities of the PU/NC semi‐IPNs were smaller than that of pure PU, and decreased with the decrease of M_η of nitrocellulose (NC M_η), indicating NC molecules cohered intimately with PU, and hindered the PU network formation. The physical and mechanical properties of the films coated with PU/NC coatings were significantly improved. With the increase of NC M_η, the strength and thermal stability of the coated films increased, but the pliability, water resistivity, and optical transmission decreased slowly. The PU/NC coating with low NC M_η more readily penetrated into the RC film, and reacted with cellulose, resulting in a strong interfacial bonding and dense surface caused by intimate blend of PU/NC in the coated films. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1623–1631, 1999     

Lower friction and higher wear resistance of fluorine‐incorporated amorphous carbon films

Plasma‐enhanced chemical vapor deposition was employed to fabricate hydrogenated amorphous carbon (a‐C:H) films and fluorine‐doped hydrogenated amorphous (a‐C:H:F) carbon films. For comparison purpose, the a‐C:H films were treated with CF₄ plasma. The bonding structure and tribological behavior of the films were investigated. The results indicate that the F presented mainly in the forms of C–F₃, C–F and C–F₂ groups in both the a‐C:H:F film and the surface CF₄ plasma processed hydrogenated amorphous carbon (F‐P‐a‐C:H) films. Moreover, the a‐C:H:F films, because of the transformation of sp³ to sp², possess a lower friction coefficient than that of the F‐P‐a‐C:H films. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel thermotropic liquid crystalline‐cum‐photocrosslinkable polyvanillylidene alkyl/arylphosphate esters

A new class of linear unsaturated polyphosphate esters based on divanillylidene cyclohexanone possessing liquid crystalline‐cum‐photocrosslinkable properties have been synthesized from 2,6‐bis[n‐hydroxyalkyloxy(vanillylidene)]cyclohexanone [n = 6,8,10] with various alkyl/aryl phosphorodichloridates in chloroform at ambient temperature. The resultant polymers were characterized by intrinsic viscosity, FT‐IR, ¹H, ¹³C, and ³¹P‐NMR spectroscopy. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The liquid crystalline textures of the polymers became more transparent with increasing spacer length. The thermal behavior of the polymers was studied by thermogravimetric analysis and differential scanning calorimetry. The T_g, T_m, and T_i of the polymers decreased with increasing flexible methylene chain. The photocrosslinking property of the polymer was investigated by UV light/UV spectroscopy; the crosslinking proceeds via 2π‐2π cycloaddition reactions of the divanillylidene exocyclic double bond of the polymer backbone. The pendant alkyloxy containing polymers show faster crosslinking than the pendant phenyloxy containing polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5215–5226, 2004