Revealing Crystallization‐Induced Blue‐Shift Emission of a Di‐Boron Complex by Enhanced Photoluminescence and Electrochemiluminescence

Elucidating the effects of crystallization‐induced blue‐shift emission of a newly synthesized di‐boron complex (DBC) by enhanced photoluminescence (PL) and electrochemiluminescence (ECL) in the annihilation pathway was realized for the first time. The 57 nm blue‐shift and great enhancement in the crystalline lattice relative to the DBC solution were attributed to the restriction of intramolecular rotation (RIR) and confirmed by PL imaging, X‐ray diffraction, as well as DFT calculations. It was discovered that ECL at crystalline film/solution interfaces can be further enhanced by means of both co‐reactant route and RIR. The RIR contributions with co‐reactant increased ECL up to 5 times more. Very interestingly, the co‐reactant system was found to give off a red‐shifted light emission. Mechanistic studies reveal that a difference between location of the ECL in the co‐reactant route and that in the annihilation pathway leads to an alternative emission wavelength.     

Electroactive Metal–Organic Frameworks as Emitters for Self-Enhanced Electrochemiluminescence in Aqueous Medium

Metal–organic frameworks (MOFs) have limited applications in electrochemistry owing to their poor conductivity. Now, an electroactive MOF (E-MOF) is designed as a highly crystallized electrochemiluminescence (ECL) emitter in aqueous medium. The E-MOF contains mixed ligands of hydroquinone and phenanthroline as oxidative and reductive couples, respectively. E-MOFs demonstrate excellent performance with surface state model in both co-reactant and annihilation ECL in aqueous medium. Compared with the individual components, E-MOFs significantly improve the ECL emission due to the framework structure. The self-enhanced ECL emission with high stability is realized by the accumulation of MOF cation radicals via pre-reduction electrolysis. The self-enhanced mechanism is theoretically identified by DFT. The mixed-ligand E-MOFs provide a proof of concept using molecular crystalline materials as new ECL emitters for fundamental mechanism studies.     

Electrochemistry, electrogenerated chemiluminescence, and excimer formation dynamics of intramolecular π-stacked 9-naphthylanthracene derivatives and organic nanoparticles

We report the electrochemical characterization and the observation of excimer emission from a series of 9-naphthylanthracene-based dimer- and trimer-bridged high steric hindrance aromatic groups during photoluminescence (PL) measurements in the solid state and in solution electrogenerated chemiluminescence (ECL) measurements. Cyclic voltammetry of 4,4'-bis(9-(1-naphthyl)anthracen-10-yl)biphenyl (4A) and 1,3,5-tris(9-(1-naphthyl)anthracen-10-yl)benzene (4C) showed two or three reversible, closely spaced one-electron transfers on oxidation in dichloromethane. The ECL emission spectra of 4A and 4C resulting from the annihilation reaction in benzonitrile showed two bands: one at the same wavelength as the PL peak in the solution state, and a broad band at longer wavelength. With a coreactant, such as peroxydisulfate, ECL spectra showed a single peak that was less broad in shape. PL measurement in the solid state and measurement of representative time traces of PL intensity, lifetimes, and picosecond time-correlated single-photon counting confirmed excimer emission at long wavelength. A reprecipitation method was used to prepare well-dispersed organic nanoparticles (NPs) of 4A in both aqueous and acetonitrile solutions. The smallest stable size of NPs produced was ~15 ± 6 nm, as analyzed by transmission electron microscopy. These organic NPs produced stable and weak ECL emission from the annihilation reaction in both aqueous and MeCN solutions. With a coreactant, such as peroxydisulfate, the ECL signal on reduction was sufficiently strong to obtain an ECL spectrum.     

Efficient greenish blue electrochemiluminescence from fluorene and spirobifluorene derivatives

The spectroscopic and electrochemical behavior as well as electrogenerated chemiluminescence (ECL) of a series of donor-π-donor derivatives bearing triphenylamine groups as donor connected to a fluorene, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-dimethylfluorene (1), or spirobifluorene core, 2,7-bis-(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (2) and 2,2',7,7'-tetrakis(4-(N,N-diphenylamino)phen-1-yl)-9,9'-spirobifluorene (3), were investigated. Besides a high photoluminescence (PL) quantum yield in solution (between 81 and 87%), an efficient radical ions annihilation process induces intense greenish blue ECL emission that could be seen with the naked eye. Only the tetrasubstituted spirobifluorene derivative (compound 3) shows weak ECL obtained by a direct annihilation mechanism. Because the energy of the annihilation reaction is higher than the energy required to form the singlet excited state, the S-route could be considered the pathway followed by the ECL process in these molecules. The ECL emissions recorded by direct ion-ion annihilation show two bands compared to the single structureless PL band. The ECL spectra obtained by a coreactant approach using benzoylperoxide as a coreagent show no differences relative to that produced by annihilation, except for an increasing of ECL intensity for all compounds.     

Green and blue electrochemically generated chemiluminescence from click chemistry--customizable iridium complexes

Cationic cyclometalated iridium complexes containing two anionic phenylpyridine (ppy) ligands and the neutral bidentate triazole-pyridine ligand, 2-(1-substituted-1H-1,2,3-triazol-4-yl)pyridine (pytl), were investigated. The complexes display a rich and reversible electrochemical behavior, upon investigations by cyclic voltammetry in strictly aprotic conditions, that couples with excellent emission quantum yields and long lifetimes of the excited states. Therefore, in organic media, all complexes have generated intense green electrochemiluminescence (ECL) through the so-called annihilation procedure and, importantly, a modulation of the emission energy (to blue) has been easily obtained by simple fluorination of the ppy ligand. Finally, taking advantage of their remarkable solubility in water, intense ECL was also obtained from aqueous buffer solutions using the co-reactant method, thus making all the investigated complexes highly promising for their effective use as ECL labels in bioanalytical applications.     

Electroactive Metal–Organic Frameworks as Emitters for Self‐Enhanced Electrochemiluminescence in Aqueous Medium

Metal–organic frameworks (MOFs) have limited applications in electrochemistry owing to their poor conductivity. Now, an electroactive MOF (E‐MOF) is designed as a highly crystallized electrochemiluminescence (ECL) emitter in aqueous medium. The E‐MOF contains mixed ligands of hydroquinone and phenanthroline as oxidative and reductive couples, respectively. E‐MOFs demonstrate excellent performance with surface state model in both co‐reactant and annihilation ECL in aqueous medium. Compared with the individual components, E‐MOFs significantly improve the ECL emission due to the framework structure. The self‐enhanced ECL emission with high stability is realized by the accumulation of MOF cation radicals via pre‐reduction electrolysis. The self‐enhanced mechanism is theoretically identified by DFT. The mixed‐ligand E‐MOFs provide a proof of concept using molecular crystalline materials as new ECL emitters for fundamental mechanism studies.     

Emission from the working and counter electrodes under co-reactant electrochemiluminescence conditions

We present a new approach to explore the potential-dependent multi-colour co-reactant electrochemiluminescence (ECL) from multiple luminophores. The potentials at both the working and counter electrodes, the current between these electrodes, and the emission over cyclic voltammetric scans were simultaneously measured for the ECL reaction of Ir(ppy)₃ and either [Ru(bpy)₃]²⁺ or [Ir(df-ppy)₂(ptb)]⁺, with tri-n-propylamine as the co-reactant. The counter electrode potential was monitored by adding a differential electrometer module to the potentiostat. Plotting the data against the applied working electrode potential and against time provided complementary depictions of their relationships. Photographs of the ECL at the surface of the two electrodes were taken to confirm the source of the emissions. This provided a new understanding of these multifaceted ECL systems, including the nature of the counter electrode potential and the possibility of eliciting ECL at this electrode, a mechanism-based rationalisation of the interactions of different metal-complex luminophores, and a previously unknown ECL pathway for the Ir(ppy)₃ complex at negative potentials that was observed even in the absence of the co-reactant.

Exploration of potential-dependent, multi-colour co-reactant electrochemiluminescence from multiple luminophores at the working and counter electrodes reveals new pathways to emission.     

Dopamine detection based on its quenching effect on the anodic electrochemiluminescence of CdSe quantum dots

Anodic electrochemiluminescence (ECL) of CdSe quantum dots (QDs) in a neutral system was for the first time observed at a relatively low potential by using sulfite as a co-reactant to produce the ECL emission at an indium tin oxide (ITO) electrode, which could be used for the sensitive detection of ECL quenchers using dopamine (DA) as a model molecule.     

Further Determination of Cadmium Ions in Water by an Electrochemiluminescence Method

ABSTRACT

Two new electrochemiluminescence (ECL) reactions in aqueous solution involving cadmium(II) ions are reported. The ECL reaction occurs in the presence of a common co-reactant, tripropylamine (TPA), and either of two organic ligands, 2,2′:6′,2″-terpyridine or 2,2′-bipyridine. The reaction is presumed to arise from the metal-ligand complex and the co-reactant. Conditions for ECL emission were optimised and a calibration graph constructed. Emission was linear over the range 10-1 000 ppb. The calculated limits of detection (LOD) were 8 and 50 ppb using terpyridine and bipyridine, respectively. Comparison with a previously reported reaction involving cadmium(II) ions and 1, 10-phenathroline is made.     

Benzosiloles with Crystallization-Induced Emission Enhancement of Electrochemiluminescence: Synthesis,Electrochemistry, and Crystallography

Crystallization-induced emission enhancement (CIEE) was demonstrated for the first time for electrochemilunimescence (ECL) with two new benzosiloles. Compared with their solution, the films of the two benzosiloles gave CIEE of 24 and 16 times. The mechanism of the CIEE-ECL was examined by spooling ECL spectroscopy, X-ray crystal structure analysis, photoluminescence, and DFT calculations. This CIEE-ECL system is a complement to the well-established aggregation-induced emission enhancement (AIEE) systems. Unique intermolecular interactions are noted in the crystalline chromophore. The first heterogeneous ECL system is established for organic compounds with highly hydrophobic properties.     

Electrogenerated chemiluminescence in systems with tetraphenylborate anion as a co-reactant

The study of electrogenerated chemiluminescence (ECL) in aqueous and non-aqueous media with tetraphenylborate anion as a co-reactant is reported. The obtained results indicate that tetraphenylborate acts according to an oxidative reduction scheme and forms a strong reducer after being homogeneously oxidized by a radical cation or dication of luminophore. Spectral measurements prove that light emission originates from the luminophore present in solution and practically no emission occurs when only tetraphenylborate ion is oxidized at the electrode. Since the tetraphenylborate ion is a well known analytical reactant and precipitates a number of metal and organic cations its electrochemiluminescent detection can be used for their assay. It can also be applied as an efficient co-reactant for electrogenerated chemiluminescence excitation both in aqueous and non-aqueous media.     

Electrogenerated chemiluminescence of anatase TiO₂ nanotubes film

Highly ordered titanium dioxide (TiO₂) nanotubes film was successfully synthesized via anodic oxidation of a Ti foil in an ammonium fluoride-based ethylene glycol solution. The electrogenerated chemiluminescence (ECL) behavior of the resulting TiO₂ nanotubes film was subsequently studied. Strong ECL emission was observed at −1.40 V (vs. Ag/AgCl) and the ECL spectrum displayed three emission peaks which were bathochromatically shifted by ca. 140 nm as compared to its corresponding photoluminescence (PL) emission peaks, indicating that the surface state plays an important role in the emission process. The ECL emission can also occur in a deareated solution attributing to the surface adsorbed O₂ molecules. The ECL emission intensity was quenched by dopamine and greatly enhanced in the presence of dissolved O₂ and H₂O₂, making it possible to detect these analytes. The TiO₂ nanotubes film has been successfully applied to determine the dissolved O₂ content in river and pond water samples, the H₂O₂ concentration in commercial disinfectant samples and the dopamine concentration in commercial dopamine injections with satisfactory results. The plausible ECL mechanisms of TiO₂ nanotubes film in aqueous solution are discussed.     

Scanning electrochemical microscopy study of ion annihilation electrogenerated chemiluminescence of rubrene and [Ru(bpy)3]2+

Scanning electrochemical microscopy (SECM) was used for the study of electrogenerated chemiluminescence (ECL) in the radical annihilation mode. The concurrent steady-state generation of radical ions in the microgap formed between a SECM probe and a transparent microsubstrate provides a distance-dependent ECL signal that can provide information about the kinetics, stability, and mechanism of the light emission process. In the present study, the ECL emission from rubrene and [Ru(bpy)(3)](2+) was used to model the system by carrying out experiments with the SECM and light-detecting apparatus inside an inert atmosphere box. We studied the influence of the distance between the two electrodes, d, and the annihilation kinetics on the ECL light emission profiles under steady-state conditions, as well as the ECL profiles when carrying out cyclic voltammetry (CV) at a fixed d. Experimental results are compared to simulated results obtained through commercial finite element method software. The light produced by annihilation of the ions was a function of d; stronger light was observed at smaller d. The distance dependence of the ECL emission allows the construction of light approach curves in a similar fashion as with the tip currents in the feedback mode of SECM. These ECL approach curves provide an additional channel to describe the reaction kinetics that lead to ECL; good agreement was found between the ECL approach curve emission profile and the simulated results for a fast, diffusion-limited second-order annihilation process (k(ann) > 10(7) M(-1) s(-1)). In the CV mode at fixed distance, the ECL emission of rubrene showed two distinct signals at different potentials when fixing the substrate to generate the radical cation and scanning the tip to generate the radical anion. The first signal (pre-emission) corresponded to an emission well before reaching the generation of the radical anion and was more intense on Au than on Pt. The second ECL signal showed the expected steady-state behavior from the second-order annihilation reaction and agreed well with the simulation. A comparison of the emission obtained with rubrene and [Ru(bpy)(3)](2+) to test the direct formation of lower energy triplets directly at the electrode showed that triplets are not the cause of the pre-emission observed. Wavelength selection experiments for the rubrene system showed that the pre-emission ECL signal also appeared slightly red-shifted with respect to the main luminophore emission; a possible explanation for this phenomenon is inverse photoemission, where the injection of highly energetic holes by the oxidized species into the negatively biased tip electrode causes emission of states in the metal that appear at a different wavelength than the singlet emission from the ECL luminophore.     

Electrochemistry, spectroscopy, and electrogenerated chemiluminescence of some star-shaped truxene-oligofluorene compounds

We report electrochemical studies, spectroscopy, and electrogenerated chemiluminescence (ECL) of four monodisperse star-shaped truxene core-oligofluorene compounds (T1-T4). All oligomers produced stable radical anions and radical cations and showed blue ECL by ion annihilation with an intensity that could be seen with the naked eye. ECL spectra showed that all ECL emissions were at the same position as the fluorescence emission, except for T1, the compound with the shortest fluorene arms that produced some longer wavelength emission in addition to that seen in the fluorescence spectrum. When tetra-n-butylammonium oxalate was used as a coreactant for T1, the emission was much weaker than that in ion annihilation with the same long-wavelength emission observed, making it unlikely that this emission can be ascribed to excimer formation. The ECL intensity of T4 was about 80% of the common blue ECL emitter, 9,10-diphenylanthracene (DPA), under similar conditions.     

Polymer Electrochemiluminescence Featuring Thermally Activated Delayed Fluorescence

Electrochemiluminescence (ECL) based on conjugated polymers or oligomers is persistently being pursued owing to its huge application scope ranging from ultra-sensitive bioanalysis to ultra-resolution imaging and spectroscopy. Because of the theoretical limit in radiative exciton generation yield (typically ∼25 %) of those polymers or oligomers, the corresponding ECL efficiency is still limited, which hampers its ECL performance and its related applications. Herein, we report ECL based on a thermally activated delayed fluorescence (TADF) polymer scaffold, which is characteristic of all-exciton harvesting in the ECL process, and thus potentially capable of achieving ∼100 % ECL efficiency. These desired properties of the TADF polymer ECL is attributed to a fast and efficient up-conversion process from non-radiative triplet to radiative singlet states under thermal activation, which is absent in conventional fluorescent polymers/oligomers, such as F8BT. In this study, various ECL modes, including annihilation or co-reactant mode using TPrA or S₂O₈²⁻ as co-reactant, are confirmed for our model TADF polymer ECL system, which was different from fluorescent polymer ECL counterpart. Furthermore, solid-state ECL sensing on L-cysteine (an important marker of disease) is also evaluated by using the model TADF polymer. Ultralow detection limit in combination with high sensitivity and good specificity are achieved for this model system, indicative of a high potential of the TADF polymer scaffold for applications in the broad field of ECL.     

Enhanced Electrochemiluminescence from a Stoichiometric Ruthenium(II)–Iridium(III) Complex Soft Salt

Electrochemiluminescence (ECL) and electrochemistry are reported for a heterometallic soft salt, [Ru(dtbubpy)₃][Ir(ppy)₂(CN)₂]₂ ( [Ir][Ru][Ir] ), consisting of a 2:1 ratio of complementary charged Ru and Ir complexes possessing two different emission colors. The [Ru]²⁺ and [Ir]^? moieties in the [Ir][Ru][Ir] greatly reduce the energy required to produce ECL. Though ECL intensity in the annihilation path was enhanced 18× relative to that of [Ru(bpy)₃]²⁺, ECL in the co‐reactant path with tri‐n‐propylamine was enhanced a further 4×. Spooling spectroscopy gives insight into ECL mechanisms: the unique light emission at 634 nm is due to the [Ru]²⁺* excited state and no [Ir]^?* was generated in either route. Overall, the soft salt system is anticipated to be attractive and suitable for the development of efficient and low‐energy‐cost ECL detection systems.     

Molecular Size and Electronic Structure Combined Effects on the Electrogenerated Chemiluminescence of Sulfurated Pyrene‐Cored Dendrimers

The electrochemistry, photophysics, and electrochemically generated chemiluminescence (ECL) of a family of polysulfurated dendrimers with a pyrene core have been thoroughly investigated and complemented by theoretical calculations. The redox and luminescence properties of dendrimers are dependent on the generation number. From low to higher generation it is both easier to reduce and oxidize them and the emission efficiency increases along the family, with respect to the polysulfurated pyrene core. The analysis of such data evidences that the formation of the singlet excited state by cation–anion annihilation is an energy‐deficient process and, thus, the ECL has been justified through the triplet–triplet annihilation pathway. The study of the dynamics of the ECL emission was achieved both experimentally and theoretically by molecular mechanics and quantum chemical calculations. It has allowed rationalization of a possible mechanism and the experimental dependence of the transient ECL on the dendrimer generation. The theoretically calculated Marcus electron‐transfer rate constant compares very well with that obtained by the finite element simulation of the whole ECL mechanism. This highlights the role played by the thioether dendrons in modulating the redox and photophysical properties, responsible for the occurrence and dynamics of the electron transfer involved in the ECL. Thus, the combination of experimental and computational results allows understanding of the dendrimer size dependence of the ECL transient signal as a result of factors affecting the annihilation electron transfer.     

Electrochemiluminescence Enhancement of CdTe Quantum Dots by the Addition of Silver(I) Ions

Water-soluble CdTe quantum dots (QDs) were synthesized by using a 3-mercaptopropionic acid (MPA) capped method. Stable electrochemiluminescence (ECL) was obtained when the CdTe QDs were immobilized onto a glassy carbon electrode (GCE) by Layer-By-Layer (LBL) assembly of CdTe QDs and polydiallyldimethylam-monium chloride (PDDA) by using 2-(dibutylamino)-ethanol (DBAE) as a co-reactant. The ECL enhancement of CdTe QDs by the addition of silver(I) ions was also investigated. The maximum enhancement factor about 4 was obtained on a GCE in the presence and absence of the co-reactant. The enhancement was observed in phosphate-citric acid and phosphate buffer solutions (PBS), but not in borate buffer solution (BBS). This was newly formed Ag nanoparticles or silver(I) complex with large surface area and high catalytic activity in the phosphate-citric acid and phosphate buffer solutions, thus resulting in ECL enhancement.     

Electrochemiluminescence of ruthenium(II) complexes functionalized with crown ether pendants and effects of cation binding

Electrochemiluminescence (ECL) of a series of ruthenium(II) diimine complexes with appended crown ethers derived from 1,10-phenanthroline was studied via either the annihilation route or the coreactant schemes, and the ECL efficiency has been determined. The effect of an FSN surfactant on the ECL properties was also studied in buffer solutions. The effect of cation binding on the ECL behavior was examined. The ECL intensity of [Ru(bpy)2(phen-2NH)](ClO4)2 has been found to be strongly enhanced upon binding with Zn2+ and alkaline-earth metal ions. The X-ray crystal structure of [Ru(bpy)2(phen-2NH)](ClO4)2 has also been determined.     

Electrogenerated chemiluminescence of a spirobifluorene-linked bisanthracene: a possible simultaneous, two-electron transfer

We report the electrogenerated chemiluminescence (ECL) of 2,2'-bis(10-phenylanthracen-9-yl)-9,9'-spirobifluorene (spiro-FPA), a dichromophoric molecule composed of two phenylanthracenes linked by a spirobifluorene moiety (PA-X-PA). The results are compared to those for 9,10-diphenylanthracene (DPA), a related molecule with a single chromophore. Cyclic voltammetry (CV) of spiro-FPA shows two reversible, closely spaced, one-electron transfers on both reduction and oxidation, occurring at E(o)(1,red) = -2.02, E(o)(2,red) = -2.07 V vs SCE and E(o)(1,ox) = 1.14, E(o)(2,ox) = 1.20 V vs SCE. The potentials for each pair are close enough to appear as a single peak in CV, indicating that the spirobifluorene moiety interrupts conjugation between the redox centers. The potentials observed are similar to those of DPA, which shows E(o)(red) = -2.06 V vs SCE and E(o)(ox) = 1.15 V vs SCE. The absorbance spectrum of spiro-FPA shows lambda(max,abs) = 377 nm, with 377 = 25,700 M(-1) s(-1), while DPA exhibited lambda(max,abs) = 374 nm, with 374 = 13,800 M(-1) s(-1), demonstrating that spiro-FPA has twice the available chromophores as DPA. Photoluminescence (PL) data for spiro-FPA shows lambda(max,PL) = 434 nm, with Phi(PL) = 0.74, while DPA fluoresces at 420 nm with Phi(PL) = 0.91; thus, there is greater solvent or structural relaxation in the spiro-FPA excited state, which may account for the greater internal conversion. Unlike DPA, the ECL spectrum of spiro-FPA exhibits long-wavelength emission not observed in the PL. We attribute this emission to excimers formed during annihilation ECL. Steric hindrance prevents DPA from forming excimers, even in ECL, but spiro-FPA annihilation can occur between pairs of di-ions (PA(*-)-X-PA(*-) and PA(*+)-X-PA(*+)), which are electrostatically more strongly attracted to one another than the mono-ions. This greater electrostatic attraction may be sufficient to overcome the steric hindrance to excimer formation. Lowering the electrolyte concentration decreases the electrostatic shielding of the ions from one another; thus, the increase in longer wavelength ECL accompanying a decrease in electrolyte concentration supports the role of the di-ions in excimer formation. Additionally, simulations show, consistent with experiment, a more rapid decrease in excimer concentration than in excited monomer concentration as a function of time after each potential pulse. This is probably due to the greater number of scavenging reactions available for di-ions. The simulations are confirmed experimentally when lower potential pulsing frequencies yield lower relative excimer emission. Since an excited state created by one-electron transfer between two di-ions should be rapidly quenched via electron transfer by the other PA moiety, the existence of excimers suggests the possibility of simultaneous, two-electron transfer to generate the excimer.