Titanium tetrachloride supported on atom transfer radical polymerized poly(methyl acrylate‐co‐1‐octene) as catalyst for ethylene polymerization

Ethylene polymerizations were performed using catalyst based on titanium tetrachloride (TiCl₄) supported on synthesized poly(methyl acrylate‐co‐1‐octene) (PMO). Three catalysts were synthesized by varying TiCl₄/PMO weight ratio in chlorobenzene resulting in incorporation of titanium in different percentage as determined by UV‐vis spectroscopy. The coordination of titanium with the copolymer matrix was confirmed by FTIR studies. The catalysts morphology as observed by SEM was found to be round shaped with even distributions of titanium and chlorine on the surface of catalyst. Their performance was evaluated for atmospheric polymerization of ethylene in n‐hexane using triethylaluminum as cocatalyst. Catalyst with titanium incorporation corresponding to 2.8 wt % showed maximum activity. Polyethylenes obtained were characterized for melting temperature, molecular weight, morphology and microstructure. The polymeric support utilized for TiCl₄ was synthesized using activators regenerated by electron transfer (ARGET) Atom Transfer Radical Polymerization (ATRP) of methyl acrylate (MA) and 1‐octene (Oct) with Cu(0)/CuBr₂/tris(2‐(dimethylamino)ethyl)amine (Me₆TREN) as catalyst and ethyl 2‐bromoisobutyrate (EBriB) as initiator at 80 °C. The copolymer poly(methyl acrylate‐1‐octene; PMO) obtained showed monomodal curve in Gel Permeation Chromatography (GPC) with polydispersity of 1.37 and copolymer composition (¹H NMR; F_MA) of 0.75. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7299–7309, 2008     

Influence of FeCl3‐modified chloroaluminate ionic liquids on long‐chain alkenes alkylation

The influence of anhydrous ferric chloride on the catalytic properties of chloroaluminate ionic liquids catalyst for Friedel–Crafts alkylation was investigated. The catalysts were characterized by Fourier‐transform infrared (FT‐IR) (acetonitrile molecule as probe), specific gravity, and ²⁷Al NMR. Besides, the effect of the mass ratio of FeCl₃ to AlCl₃, catalysts dosage, toluene/olefin molar ratio, reaction temperature, and reaction time on long‐chain alkenes alkylation were investigated thoroughly. And bromine value and high‐performance liquid chromatography (HPLC) were employed as the evaluation method for alkylation products. It was observed that the addition of anhydrous ferric chloride results in improvement in terms of Lewis acid and its catalytic recyclability. Among these catalysts studied, the catalyst modified with 1.0 wt.% anhydrous FeCl₃ showed the best catalytic performance in terms of yield and stability, which can be attributed to the formation of new stronger acidic ions [Al₂FeCl_l0]^? when the added ferric chloride reacts with acidic ions [Al₂Cl₇]^?.     

Novel Preparation of Polyethylene from Nano‐extrusion Polymerization Inside the Nanochannels of MCM‐41/MgCl2/TiCl4 Catalysts

The MCM‐41 and SiO₂ supported TiCl₄ and TiCl₄/MgCl₂ catalysts with different molar ratios of Mg/Ti were synthesized and used for ethylene polymerization under atmospheric pressure. The nanochannels of MCM‐41 serve as nanoscale polymerization reactor and the polyethylene nanofibers were extruded during the reaction. The nanofibers were observed in SEM micrographs of resulting polyethylene. The effect of MgCl₂ on catalytic activity and thermal properties of resulting polyethylene is investigated too. In the presence of MgCl₂, the catalytic activity increased and more crystalline polyethylene with higher melting points were formed. However, no fibers could be observed in the polyethylene prepared by SiO₂ supported catalysts.     

Synthesis of polyethylene with bimodal molecular weight distribution by supported iron‐based catalyst

Through immobilization of two iron‐based complexes, [((2,6‐MePh)N = C(Me))₂C₅H₃N]FeCl₂ ( 1 ) and [((2,6‐iPrPh)N = C(Me))₂C₅H₃N]FeCl₂ ( 2 ), on SiO₂ pretreated with tetraethylaluminoxane (TEAO), two supported iron‐based catalysts, 1 /TEAO/SiO₂ ( 3 ) and 2 /TEAO/SiO₂ ( 4 ), were prepared. These two supported catalysts 3 and 4 could be used to catalyze ethylene polymerization with moderate polymerization activity and prepare linear high‐density polyethylene with bimodal molecular weight distribution (MWD). It was demonstrated that immobilization of catalyst could significantly improve molecular weight (MW) of high‐MW fraction of the resultant polyethylene, as well as maintain bimodal MWD of polyethylene produced by the corresponding homogeneous catalysts. Such bimodal MWD of polyethylene produced by supported iron‐based catalysts could be well tailored by varying polymerization conditions, such as ethylene pressure and molar ratio of Al to Fe. It has been proven that TEAO is an efficient activator for both homogeneous and heterogeneous iron‐based catalysts for producing polyethylene with bimodal MWD. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5662–5669, 2004     

Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for a-Olefin Polymerization

Totally sixteen new titanium and zirconium non-Cp complexes supported by Schiff-base, or thiophene diamide ligands have been synthesized. The complexes are obtained by the reaction of M(OPr-i)4(M=Ti,Zr) with the corresponding Schiff-base ligand in 1:1 molar ratio in good yield. The thiophene diamide titanium complex has been prepared from trimethylsilyl amine [N,S,N] ligand and TiCl4 in toluene at 120℃. All complexes are well charac-terized by ^1H NMR, IR, MS and elemental analysis. When activated by excess methylaluminoxane (MAO), complexes show moderate catalytic activity for ethylene polymerization, and complex If (R^1=CH3,R^2=Br) exhibits the highest activity for ethylene and styrene polymerization. When the complexes were preactivated by triethylaluminum (TEA), both polymerization activities and syndiotacticity of the polymers were greatly improved.     

Olefin polymerization and copolymerization by complexes bearing [ONNO]‐Type salan ligands: Effect of ligand structure and metal type (titanium,zirconium, and vanadium)

A series of novel titanium(IV) complexes bearing tetradentate [ONNO] salan type ligands: [Ti{2,2′‐(OC₆H₃‐5‐t‐Bu)₂‐NHRNH}Cl₂] (Lig¹TiCl₂: R = C₂H₄; Lig²TiCl₂: R = C₄H₈; Lig³TiCl₂: R = C₆H₁₂) and [Ti{2,2′‐(OC₆H₂‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴TiCl₂) were synthesized and used in the (co)polymerization of olefins. Vanadium and zirconium complexes: [ M{2,2′‐(OC₆H₃‐3,5‐di‐t‐Bu)₂‐NHC₆H₁₂NH}Cl₂] (Lig⁴VCl₂: M = V; Lig⁴ZrCl₂: M = Zr) were also synthesized for comparative investigations. All the complexes turned out active in 1‐octene polymerization after activation by MAO and/or Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄]. The catalytic performance of titanium complexes was strictly dependent on their structures and it improves for the increasing length of the aliphatic linkage between nitrogen atoms (Lig¹TiCl₂ << Lig²TiCl₂ < Lig³TiCl₂) and declines after adding additional tert‐Bu group on the aromatic rings (Lig³TiCl₂ < Lig⁴TiCl₂). The activity of all titanium complexes in ethylene polymerization was moderate and the properties of polyethylene was dependent on the ligand structure, cocatalyst type, and reaction conditions. The Et₂AlCl‐activated complexes gave polymers with lover molecular weights and bimodal distribution, whereas ultra‐high molecular weight PE (up to 3588 kg mol^?1) and narrow MWD was formed for MAO as a cocatalyst. Vanadium complex yielded PE with the highest productivity (1925.3 kg mol_v^?1), with high molecular weight (1986 kg mol^?1) and with very narrow molecular weight distribution (1.5). Copolymerization tests showed that titanium complexes yielded ethylene/1‐octene copolymers, whereas vanadium catalysts produced product mixtures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2111–2123     

The discovery and progress of MgCl2‐supported TiCl4 catalysts

Polyolefins represented by polyethylene (PE) and polypropylene (PP) are indispensable materials in our daily lives. TiCl₃ catalysts, established by Ziegler and Natta in the 1950s, led to the births of the polyolefin industries. However, the activities and stereospecificities of the TiCl₃ catalysts were so low that steps for removing catalyst residues and low stereoregular PP were needed in the production of PE and PP. Our discovery of MgCl₂‐supported TiCl₄ catalysts led to more than 100 times higher activities and extremely high stereospecificities, which enabled us to dispense with the steps for the removals, meaning the process innovation. Furthermore, they narrowed the molecular weight and composition distributions of PE and PP, enabling us to control the polymer structures precisely and create such new products as very low density PE or heat‐sealable film at low temperature. The typical example of the product innovations by the combination of the high stereospecificity and the narrowed composition distribution is high‐performance impact copolymer used for an automobile bumper that used to be made of metal. These process and product innovations established these polyolefin industries. The latest MgCl₂‐supported TiCl₄ catalyst is very close to perfect control of isotactic PP structure and is expected to bring about further innovations. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1–8, 2004     

Dehydration of Castor Oil over NaHSO4/MCM‐41 Catalyst Modified by n‐Dodecyltriethoxysilane

n‐Dodecyltriethoxysilane (DTEOS) modified NaHSO₄/MCM‐41 catalysts (silanized catalysts) were synthesized by different impregnation sequences and evaluated in the liquid‐phase dehydration of castor oil. The samples were evaluated by X‐ray diffraction, nitrogen adsorption‐desorption, SEM, TEM, FT‐IR spectroscopy, XPS, ²⁹Si MAS NMR spectroscopy, contact angle measurements, NH₃‐TPD, and pyridine‐FT‐IR spectroscopy. The analyses demonstrated that silanization enhanced the hydrophobicity of the catalysts, and the impregnation sequence of silanized catalysts had a significant effect on the NaHSO₄ dispersion, surface area, acid distribution, and hydrophobicity of the silanized catalysts. The catalytic activity of the silanized catalysts was much higher than that of NaHSO₄/MCM‐41. Among the silanized catalysts, the catalyst prepared by simultaneous impregnation with DTEOS and NaHSO₄ showed the highest iodine value of 141.8 [g(I₂) per 100 g] and lowest hydroxyl value of 11.3 [mg(KOH) · g^–1].     

Efficient Aerobic Oxidative Synthesis of Benzimidazoles with Fe(III) based PEG1000 Dicationic Imidazolium Ionic Liquid/toluene Temperature‐dependent Biphasic System

A green protocol for the synthesis of benzimidazoles with Fe(III) based PEG1000 dicationic imidazolium ionic liquid ([PEG₁₀₀₀mim₂][FeCl₄]₂)/toluene temperature‐dependent biphasic system was described. Conformed by IR analysis, FeCl₄⁻ is the dominating anion species. It could be seen that aldehydes aryla mines and aromatic aldehydes bearing electron‐deficient group ( Cl,  Br,  NO₂) and electron‐rich groups ( OH,  N(CH₃)₂) on the aromatic rings gave good yields (78–96 %). Moreover, the Fe(III) based PEG1000 dicationic imidazolium ionic liquid could be recycled and reused without significant loss of catalytic activity after seven runs.     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

Effects of nano graphene oxide as support on the product properties and performance of Ziegler–Natta catalyst in production of UHMWPE

The synthesis of mono‐ and bi‐supported Ziegler–Natta catalysts using magnesium etoxide Mg(OEt)₂ and graphene oxide (GO) as catalyst support for production of Ultra High Molecular Weight Polyethylene (UHMWPE) is reported in this investigation. Nano‐graphene oxide was prepared by the modified Hummer's method and its structure was analyzed by XRD and FTIR indicating the presence of hydroxyl groups on graphene oxide and the formation of an exfoliated structure. The activity of TiCl₄/Mg(OEt)₂, TiCl₄/Mg(OEt)₂‐GO, and TiCl₄/GO catalysts in terms of grams of PE produced per mmol of Ti per hour was experimentally obtained for catalysts with different ratios of co‐catalyst (triisobutylaluminium) to TiCl₄. For all three series of catalysts, the activity curve showed an optimum point at a specific Al/Ti molar ratio. Catalyst activity was highest for TiCl₄/Mg(OEt)₂ and lowest for TiCl₄/GO. The characterization of UHMWPE products indicated that the viscosity average molecular weight (Mv) was highest for the polymer produced by TiCl₄/Mg(OEt)₂ and lowest for the polymer produced by TiCl₄/GO. Furthermore, thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), and mechanical tensile testing were conducted on the prepared polymers indicating that the polymer produced by TiCl₄/GO had the highest thermal and mechanical properties, while these properties were at their minimum for polymers produced by TiCl₄/Mg(OEt)₂. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly active MgCl2‐supported catalysts containing novel diether donors for propene polymerization

A new generation of MgCl₂‐supported catalysts for the polymerization of propene without any external donors was prepared. Two diethers, 9,9‐bis(methoxymethyl)fluorene (for Cat‐A) and 2,2‐dipropyl‐1,3‐dimethoxypropane (for Cat‐B) differing in the bulkiness of alkyl substituents in position 2, have been used as internal donors in MgCl₂/TiCl₄/diether‐AlR₃ catalysts. The weight‐average molecular weights produced with both catalysts were over 3.5×10⁵ at low temperature in slurry polymerization (< 40°C). Cat‐A showed higher activity and produced higher isotactic polypropene than Cat‐B. The activity of both catalysts proved to be dependent on the temperature.     

Stereospecific styrene polymerization and ethylene–styrene copolymerization with titanocenes containing a pendant amine donor

A series of monocyclopentadienyl titanium complexes containing a pendant amine donor on a Cp group ( A = CpTiCl₃, B = Cp^NTiCl₃, C = Cp^NTiCl₂TEMPO, for Cp = C₅H₅, Cp^N = C₅H₄CH₂CH₂N(CH₃)₂, and TEMPO = 2,2,6,6‐tetramethylpiperidine‐N‐oxyl) are investigated for styrene homopolymerization and ethylene–styrene (ES) copolymerization. When activated by methylaluminoxane at 70 °C, complexes with the amine group ( B and C ) are active for styrene homopolymerization and afford syndiotactic polystyrene (sPS). The copolymerizations of ethylene and styrene with B and C yield high‐molecular weight ES copolymer, whereas complex A yields mixtures of sPS and polyethylene, revealing the critical role that the pendant amine has on the polymerization behavior of the complexes. Fractionation, NMR, and DSC analyses of the ES copolymers generated from B and C suggest that they contain sPS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1579–1585, 2010     

Supported titanium‐magnesium catalysts for ethylene polymerization: A comparative study of catalysts containing isolated and clustered titanium ions in different oxidation states

Supported titanium–magnesium catalysts (TMC) comprising isolated and clustered titanium ions in different oxidation states, which are obtained using titanium compounds of different composition (TiCl₄, TiCl₃?nDBE (DBE – dibutyl ether), [η⁶–BenzeneTiAl₂Cl₈]), were synthesized and tested in ethylene polymerization. The state of titanium ions was studied by the ESR method both for the procatalysts and after their interaction with triisobutilaluminum. For identification of ESR‐silent Ti³⁺ ions and Ti²⁺ ions, special procedures of additional catalyst treatment with pyridine, water, and chloropentafluorobenzene were used to obtain Ti³⁺ ions that are observable in ESR spectra. In distinction to numerous earlier works performed with the TiCl₄/MgCl₂ catalyst comprising after the interaction with AlR₃ the Ti³⁺ surface compounds both as isolated ions and clusters (ESR‐silent), this work considers the [η⁶–BenzeneTiAl₂Cl₈]/MgCl₂ catalyst (TMC‐3) comprising mainly the isolated Ti²⁺ ions and a new catalyst TMC‐4 obtained by treating the TMC‐3 with chloropentafluorobenzene. This catalyst comprises only the isolated Ti³⁺ ions both before and after the interaction with triisobutylaluminum. It was shown that in spite of sharp distinctions between the catalysts under consideration concerning titanium oxidation state and the ratio of isolated Ti³⁺ ions to clustered ones, all these catalysts produce polyethylenes with similar molecular weights and molecular‐weight distributions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6362–6372, 2009     

Heterogeneous Ziegler‐Natta Catalyst Based on Neodymium for the Stereospecific Polymerization of Butadiene

The synthesis of a series of neodymium complexes supported on modified silica is reported. In an initial step the silanol groups were masked by a Lewis acid (BCl₃, AlCl₃, TiCl₄, ZrCl₄, SnCl₄, SbCl₅, HfCl₄), and then a soluble arene complex Nd(η⁶‐C₆H₅Me)(AlCl₄)₃ formed in situ was reacted with the modified silica. The supported complexes are active and highly stereospecific for butadiene polymerization; 1,4‐cis insertion is superior by 99%. The catalyst based on a treatment of silica with BCl₃ is the most efficient.     

Structural isomer effects on the morphology of block copolymer/metal salts hybrids

The structural isomer effects on phase behavior of block copolymer/FeCl₃ hybrids were investigated by comparing structures of two series of blends based on polystyrene‐b‐poly(4‐vinylpyridine) (PS‐P4VP) and polystyrene‐b‐poly(2‐vinylpyridine) (PS‐P2VP), with the same molecular weight and the same composition. By conbining fourier transform infrared (FT‐IR) spectroscopy and differencial scaninng calorimetry, successful achievements of selective dispersion of FeCl₃ into poly(vinylpyridine) phase via coordination were verified. Complementary morphological observation by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), it has been clarified that phase behavior for two isomer series is considerably different. That is, neat PS‐P4VP formed thicker cylindrical domains than that of neat PS‐P2VP due to much stronger Flory‐Huggins interaction parameter χ, χ_PS‐P4VP » χ_PS‐P2VP. As for PS‐P2VP/FeCl₃ hybrids, morphological transition can be taken place at the smaller amount of metal salt; furthermore, P2VP blend series form lamellar structures with evidently larger periodic length at the same amount of metal salt. This is probably caused by the event that excess metal salt also contributes to lamellar expansion by localizing at the center of P2VP lamellar phase. Moreover, the saturation limit of introduced metal salt in P2VP was smaller than that in P4VP due to the steric hindrance for a lone pair electrons on nitrogen atoms directed to the main chain of P2VP. These results can be explained by the structural isomer effects on the conformation of the P2VP chains at coordinated state with FeCl₃, that is, P2VP chains prefer to form the intramolecular coordination due to the short range interaction so as to make themselves stiffer, whereas P4VP chains tend to adopt the long range interaction including intra‐ and intermolecular coordinations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 377–386     

Ti complex catalysts including thiobisphenoxy group as a ligand for olefin polymerization

Titanium complexes were prepared by the reaction of 2,2′-thiobis(6-tert-butyl-4-methylphenol) (TBP) with TiCl₄ or Ti(OPrⁱ)₄. These complexes in combination with methyalumoxane as cocatalyst are highly active towards ethylene and propene, giving polymers having high molecular weights. The polymerization activities for ethylene and propene are comparable to those of Cp₂ZrCl₂-MAO catalyst. Polypropylene obtained had extremely high molecular weight (Mw>6 million) and low regioregularity (30% of head-to-head and tail-to-tail linkages). Highly syndiotactic polystyrene was obtained with these catalysts with activity up to 27 kg polymer per g Ti and hour. Copolymerization of styrene with ethylene gave highly alternating copolymer with isotactic styrene units. These catalysts are also active toward both conjugated and nonconjugated dienes such as butadiene and 1,5-hexadiene. Polybutadiene had mainly cis-1,4-structure (98%). The structure of poly(1,5-hexadiene) is rather complicated, which is quite different from that prepared with heterogeneous TiCl₃ catalysts.     

State of various stereoregulating electron-donating compounds in titanium-magnesium catalysts for propylene polymerization: A diffuse reflectance IR spectroscopic study

Propylene polymerization on TiCl₄/donor/MgCl₂ (donor = ethyl benzoate, dibutyl phthalate, diisobutyl phthalate, diethyl 2,3-diisopropylsuccinate) supported catalysts is considered. The states of the donors in the catalysts have been investigated by diffuse reflectance IR spectroscopy. Data characterizing the distribution of the donors and the active component (TiCl₄) on the support surface have been obtained. Molecular weight distribution data for polypropylene are presented. The molecular weight distribution of polypropylene depends on the location of the donor and TiCl₄ molecules.     

Propylene Polymerization Performance of Isolated and Aggregated Ti Species Studied Using a Well‐Designed TiCl3/MgCl2 Ziegler‐Natta Model Catalyst

In propylene polymerization with MgCl₂‐supported Ziegler‐Natta catalysts, it is known that the reduction of TiCl₄ with alkylaluminum generates Ti³⁺ active species, and at the same time, leads to the growth of TiCl_x aggregates. In this study, the aggregation states of the Ti species were controlled by altering the Ti content in a TiCl₃/MgCl₂ model catalyst prepared from a TiCl₃ · 3C₅H₅N complex. It is discovered that all the Ti species become isolated mononuclear with a highly aspecific feature below 0.1 wt.‐% of the Ti content, and that the isolated aspecific Ti species are more efficiently converted into highly isospecific ones by the addition of donors than active sites in aggregated Ti species.

     

Copolymerization of ethylene with cyclopentene or 2‐butene with half titanocenes‐based catalysts

Half titanocenes (CpCH₂CH₂O)TiCl₂ (1), (CpCH₂CH₂OCH₃)TiCl₃ (2), and CpTiCl₃ (3), activated by methylaluminoxane (MAO) were tested in copolymerization of ethylene with internal olefins such as cyclopentene. All the catalysts were able to give incorporation of cyclopentene in polyethylene matrix. ¹³C NMR analysis of obtained copolymers showed that the catalytic systems have low regiospecificity. In fact, in ethylene–cyclopentene copolymers, cyclic olefin inserts with both 1,2 and 1,3‐enchainment. X‐ray powder diffraction analysis of these copolymers confirmed that 1,2 inserted cyclopentene units are excluded from crystalline phase, whereas 1,3‐cyclopentene units are included, giving rise to expansion of unit cell of crystalline polyethylene. Titanium‐based catalysts were investigated also in the copolymerization of ethylene with E and Z‐2‐butene. Only complex (1) was able to give copolymers and ¹³C NMR analysis of products showed 2‐3, 1‐3, and 1‐2 insertion of 2‐butene. Differential scanning calorimetry analysis displayed that ethylene–cyclopentene, as well as ethylene‐2‐butene, copolymers are crystalline and their melting point decreases by increasing the comonomer content. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4725–4733, 2008