Quantitative separation of gallium from zinc, copper, indium, iron(III) and other elements by cation-exchange chromatography in hydrobromic acid-acetone medium

Gallium can be separated from Zn, Cu(II), In, Cd, Pb(II), Bi(III), Au(III), Pt(IV), Pd(II), Tl(III), Sn(IV) and Fe(III) by elution of these elements with 0.50M hydrobromic acid in 80% acetone medium, from a column of AG50W-X4 cation-exchange resin. Gallium is retained and can be eluted with 3M hydrochloric acid. Separations are sharp and quantitative except for iron(III) which shows extensive tailing. With 0.20M hydrobromic acid in 80% acetone as eluting agent, all the species above except iron(III) and copper(II) can be separated from gallium with very large separation factors. Only a 1-g resin column and small elution volumes are required to separate trace amounts and up to 0.5 mmole of gallium from more than 1 g of zinc or the other elements. Hg(II), Rh(III), Ir(IV), Se(IV), Ge(IV), As(III) and Sb(III) have not been investigated, but should be separated together with zinc according to their known distribution coefficients. Relevant elution curves, results for the analysis of synthetic mixtures and for amounts of some elements remaining in the gallium fraction are presented.     

Separation of lithium from sodium,beryllium and other elements by cation-exchange chromatography in nitric acid-methanol

Lithium can be separated from sodium, beryllium and many other elements by eluting lithium with 1 M nitric acid in 80% methanol from a column of AG50W-X8 sulphonated polystyrene cation-exchange resin. The separation factor is not quite as large as that in 1 M hydrochloric acid in 80% methanol, but many elements, such as Zn, Cd, In, Pb(II), Bi(III) and Fe(III), which form chloride complexes in 1 M HCl-80% methanol are retained quantitatively together with Na, Be, Mg, Ca, Mn(II), Al, Ti(IV), U(VI), and many other elements, when 1 M HNO3-80% methanol is used for elution of lithium. A method for the accurate determination of traces of lithium in rock samples is described, and some results obtained are presented together with relevant distribution coefficients, elution curves and results for the analysis of synthetic mixtures.     

Quantitative separation of calcium from magnesium,aluminium, iron(III) and many other elements by cation-exchange chromatography in methanolic hydrochloric acid on a macroporous resin

Calcium can be separated from Mg, Al, Cu(II), Fe(III), Ga, Zn, Mn(II), Co(II), U(VI) and Ti(IV) by cation-exchange chromatography on a column of AG MP-50 macroporous resin. Sr, Ba, Sc, Y, the lanthanides, Zr, Hf and Th are retained together with calcium. The separation factor for the Ca—Mg pair in 3 M HCl containing 50% methanol is about 20 which is considerably larger than those obtained by other ion-exchange procedures. Separations with the cation-exchange resin are sharp and quantitative. A column containing only 2 g (5.4ml) of resin is sufficient to separate up to 0.2 mmol of calcium from 2 mmol of magnesium and larger amounts of Fe(III), Cu(II) and Zn. On a 10-g column, up to 2.5 mmol of calcium can be separated easily from similar and larger amounts of other elements. Distribution coefficients for calcium and magnesium with variation of cross-linkage and variation of methanol concentration are presented, together with relevant elution curves and results for synthetic mixtures.     

Improved separation of cadmium from indium,zinc, gallium and other elements by anion-exchange chromatography in hydrobromic nitric acid mixtures

The separation of cadmium from indium, zinc and many other elements is considerably improved by eluting these elements with 0.1 M hydrobromic–0.5 M nitric acid solution from a column of AG1-X8 resin. Cadmium is retained very strongly and can be eluted with 2 M nitric acid or 1 M ammonia–0.2 M ammonium nitrate solution. Separations are sharp and quantitative and from microgram amounts up to 2 g of indium and zinc are separated from amounts of cadmium ranging from micrograms up to 100 mg on a 2-g (4.6 ml) resin column. Ga(II), Fe(III). Mn(II), Co(II), U(VI) and Ni(II) can be separated quantitatively from cadmium in the same way. The behaviour of numerous elements is discussed, with special attention to lead, and relevant elution curves and results from the analysis of synthetic mixtures are presented.     

Improved separation of iron from copper and other elements by anion-exchange chromatography on a 4% cross-linked resin with high concentrations of hydrochloric acid

Iron(III) can be separated from copper(II) and many other elements by eluting these from a column of AG1-X4 anion-exchange resin with 8M hydrochloric acid, while iron(III) is retained and can be eluted with 0.1M hydrochloric acid. The separation is much better than the customary one with 3.5M hydrochloric acid. Columns containing only 8.8 ml (3 g) of resin can separate traces or up to more than 1 mmole of iron(III) from more than 1 g of copper. Mn(II), Ni, Al, Mg and Ca are quantitatively eluted together with copper(II). Lead, the alkali metals, Be, Sr, Ba, Ra, Sc, Y and the lanthanides, Ti(IV), Zr, Hf, Th and Cr(III) have not been investigated in detail but should be separated according to their known distribution coefficients. Separations are sharp and quantitative, less than 1 mug of copper remaining in the iron fraction when more than 1 g was present originally. Relevant elution curves and results of the quantitative analysis of synthetic mixtures are presented.     

Anion exchange separation of chromium and molybdenum from iron,vanadium, uranium and other elements in malonic acid solution

Summary Anion-exchange behaviour of chromium (III) and molybdenum (VI) was studied in malonate media. They form anionic complexes with malonic acid at pH 5.6. Various eluants, such as mineral acids and their salts were tested and a selectivity scale evolved. Cr and Mo were separated from Tl(I), alkali and alkaline earth elements by selective sorption and from Co(II), Ni(II), Mn(II), Zn(II) and Cd(II) by selective washing with water. They were separated from many other elements by selective elution. The sequential separation of Fe(III) V(IV), Cr(III), Mo(VI) and U(VI) was significant.     

Selective separation of uranium from other elements by cation-exchange chromatography in hydrobromic acid and hydrochloric acid-acetone mixtures

U(VI) can be separated from Ga, Fe(III), Bi, Pb, Cd, Zn, Cu(II) and Au(III) by quantitative elution with 0.50M HBr in 86% acetone or with 0.35M HBr in 90% acetone from a column of AG50W-X4 cation-exchange resin of 200-400 mesh particle size. U(VI) and many other ions are retained. U(VI) then can be eluted selectively with 0.50M HCl in 83% acetone or with 0.35M HCl in 85% acetone. Co(II), Mn(II), Mg, Ca, Ti(IV), Al, Zr, Th and La are quantitatively retained by the column. These elements then can be eluted with 5M HNO(3). At the higher acid concentration (0.50M) the separation between U(VI) and Li is not satisfactory but is excellent at the lower acid concentration; the U(VI) peak is sharper at the higher acid concentration. Separations are sharp and quantitative, as is demonstrated by results for some synthetic mixtures. Distribution coefficients and elution curves are presented.     

Separation of trivalent rare earths plus sc(iii) from al,ga,in,tl, fe,ti, u and other elements by cation-exchange chromatography

A method is presented for the quantitative separation of the trivalent rare earths plus Sc(III) as a group from Al(III), Ga(III), In(III), Tl(III), Fc(III). Ti(IV), U(VI), Be(II). Mn(II), Co(II), Cu(II), Ni(II). Zn(II). and Cd(II). These elements can be eluted from a cation-exchange column with 1.75 N HCl, while the rare earth group elements are retained. Numerous other elements not investigated have low distribution coefficients in 1.75 N HCl and therefore should be separated by the same procedure; Th(IV) is retained by the column when the rare earths are elutcd with 3.0 N HCl. The only elements which partially accompany the rare earths plus Sc(III) are Zr(IV), Hf(IV), Sr(II), and Ba(II) ; these have to be separated by special procedures. The method is suitable for accurate reference analysis over a wide range of concentrations.     

The quantitative separation of calcium from magnesium,aluminium and other elements by cation-exchange chromatography in ethanol-hydrochloric acid

Magnesium can be separated from calcium by elution with 3.0 M hydrochloric acid containing 60% ethanol from a column of AG₅₀W-X8 cation-exchange resin. Calcium is retained and can be eluted with 3.0 M hydrochloric acid or 2.0 M nitric acid. The separation factor of (α_Mg^ca=5.6 is considerably higher than that in aqueous hydrochloric acid and comparable to those obtained with organic complexing reagents. Separations are sharp and quantitative; up to 10 mmol of magnesium can be separated from 0.01 mmol of calcium and vice versa on a 60-ml column. Al, Fe(III), Mn, Ni(II), Co(II), Zn, Cd, Cu(II), Pb(II), U(VI), Be, Ga, Ti(IV) in the presence of H₂O₂ and many other elements accompany magnesium and can be separated from calcium quantitatively. Sr, Ba, Zr, Hf, Th, Sc, La and the rare earths are retained together with Ca, but can be separated by other methods.     

Separation of Thorium(IV) from Associated Elements Using Poly-(Dibenzo-18-Crown-6) and Column Chromatography from Picric Acid Medium

A simple column chromatographic method has been developed for the separation of thorium(IV) from associated elements using poly-(dibenzo-18-crown-6). The separations are carried out from picric acid medium. The adsorption of thorium(IV) was quantitative from 0.0005–0.05M picric acid. Amongst the various eluents tested, 2.0–8.0M HCl, HBr, 1.0–6.0M HClO₄ and 5.0M acetic acid were found to be particularly efficient for the quantitative elution of thorium(IV). The capacity of poly-(dibenzo-18-crown-6) for thorium(IV) was found to be 1.29±0.01 mmol/g of crown polymer. Thorium(IV) was separated from a number of cations in binary mixtures in which most of the cations showed a very high tolerance limit. It was possible to separate thorium(IV) from a number of cations such as lanthanum(III), yttrium(III), uranium(VI), beryllium(II) and barium(II) in multicomponent mixtures. The method was extended to the determination of thorium in monazite sand. It is possible to separate and determine 5 ppm of thorium(IV) by this method. The method is very simple, rapid, selective and has good reproducibility (approximately ±2%).     

Quantitative separation of gold from cadmium, indium, zinc and other elements by cation-exchange chromatography in hydrochloric acid-acetone medium

Gold(III) can be separated from Cd, In. Zn, Ni, Cu(II), Mn(II), Co(II), Mg, Ca, Al, Fe(III), Ga and U(VI) by adsorbing these elements on a column of AG50W-X8 sulphonated polystyrene cation-exchange resin from 0.1M HCl containing 60% v v acetone, while Au(III) passes through and can be eluted with the same reagent. Separations are sharp and quantitative. The amounts of gold retained by the resin are between 1 and 2 orders of magnitude lower than encountered during adsorption from aqueous 0.1M HCl. Recoveries for mg amounts of gold are 99.9% or better and for ng amounts are still better than 99%, as shown by radioactive tracer methods. Hg(II), Bi, Sn(IV), the platinum metals and some elements which tend to form oxy-anions in dilute acid accompany gold. All other elements, though not investigated in detail, should be retained, according to their known distribution coefficients. Relevant elution curves, results of quantitative separations of binary mixtures and of recovery tests are presented.     

Selective separation of indium from zinc, lead, gallium and many other elements by cation-exchange chromatography in hydrohalic acid-acetone medium

Indium can be separated from Zn, Pb(II), Ga, Ca, Be, Mg, Ti(IV), Mn(II), Fe(III), Al, U(VI), Na, Ni(II) and Co(II) by selective elution with 0.50M hydrochloric acid in 30% aqueous acetone from a column of AG50W-X8 cation-exchange resin, all the other elements being retained by the column. Lithium is included in the elements retained by the column when 0.35M hydrochloric acid in 45% aqueous acetone is used for eluting indium, but the elution of indium is slightly retarded. Ba, Sr, Zr, Hf, Th, Sc, Y, La and the lanthanides, Rb and Cs should also be retained according to their distribution coefficients. Cd, Bi(III), Au(III), Pt(IV), Pd(II), Rh(III), Mo(VI) and W(VI) can be eluted with 0.20M hydrobromic acid in 50% aqueous acetone before the elution of indium, and Ir(III), Ir(IV), As(III), As(V), Se(IV), Tl(III), Hg(II), Ge(IV), Sb(III) and Sb(V), though not investigated in detail, should accompany these elements. Relevant distribution coefficients and elution curves and results for analyses of synthetic mixtures of indium with other elements are presented.     

Separation of tervalent rare earths and scandium from aluminium, iron(iii), titanium(iv), and other elements by cation-exchange chromatography in hydrochloric acid-ethanol

Tervalent rare earths and Sc are separated from the silicate-forming elements Al, Fe(III), Mg and Ti(IV), and also from Mn(II), U(VI), Be, Ga, In(III), Tl(III), Bi(III), Ni, Zn, Cu(II), Cd and Pb by cation-exchange chromatography. The other elements are eluted with 3.0 M HC1 containing 50% ethanol from a column of 60 ml of AG50W-X8 resin (200-400 mesh) while the rare earths are retained. Separation factors are larger than in aqueous hydrochloric acid. Th, Zr, Hf, Ba, Sr, Ca, K, and Rb are the only elements which accompany the rare earths group, but these can easily be separated by other methods which are described. Relevant distribution coefficients, elution curves and accurate results of quantitative separations of synthetic mixtures are presented.     

Determination of aluminium in molybdenum and tungsten metals, iron, steel and ferrous and non-ferrous alloys with pyrocatechol violet

A method for determining 0.001-0.10% of aluminium in molybdenum and tungsten metals is described. After sample dissolution, aluminium is separated from the matrix materials by chloroform extraction of its acetylacetone complex, at pH 6.5, from an ammonium acetate-hydrogen peroxide medium, then back-extracted into 12M hydrochloric add. Following separation of most co-extracted elements, except for beryllium and small amounts of chroinium(III) and copper(II), by a combined ammonium pyrrolidincdithiocarbamate-cupfen-on-chlorofonn extraction, aluminium is determined spectrophotometrically with Pyrocatechol Violet at 578 nm. Chromium interferes during colour development but beryllium, in amounts equivalent to the aluminium concentration, does not cause significant error in the results. Interference from copper(II) is eliminated by reduction with ascorbic acid. The proposed method is also applicable to iron, steel, ferrovanadium, and copper-base alloys after preliminary removal of the matrix elements by a mercury cathode separation.     

Separation of silver from zinc, cadmium, copper, nickel and other elements in nitric acid with a macroporous resin

Traces of silver and amounts up to 50 mg can be separated from up to gram amounts of Zn, Cu(II), Ni, Co(II), Mg, Be, Ti(IV), V(IV), Li and Na by eluting these with 2.0M nitric acid from a column containing 54 ml (20 g) of macroporous AG MP-50 cation-exchange resin of 100-200 mesh particle size, in the H(+)-form. Silver is retained and can be eluted with 0.5M hydrobromic acid in 9:1 v v acetone-water. Separations are sharp and quantitative and only a few microg of the other elements are found in the silver fraction. Cadmium and manganese (II) can also be separated quantitatively but show tailing and require larger elution volumes. Some typical elution curves and results of analyses of synthetic mixtures are presented.     

Quantitative separation of lanthanides and scandium from barium,strontium and other elements by cation-exchange chromatography in nitric acid

The lanthanides plus yttrium and scandium are separated from Ba, Sr, Ca, Mg, Pb(II), Bi(III), Zn, Mn(II) and U(VI) by eluting these elements with 2.0 M nitric acid from a column of AG50W-X8 cation exchange resin (200-400 mesh). The lanthanides are retained and can then be eluted with 4 M nitric or hydrochloric acid. Separations are quantitative and applicable to microgram and millimolar amounts of the lanthanides and the other elements. Elements such as Cu(II), Co(II), Ni(II), Cd. Hg(II), T1(I). Ag, Be, Ti(IV) and the alkali metals should accompany barium quantitatively according to their known distribution coefficients. Relevant elution curves and results of analysis of synthetic mixtures are presented.     

Preparation and properties of a new chelating resin containing 1-nitroso-2-naphthol as the functional group

A macroreticular polystyrene-based chelating ion-exchanger containing 1-nitroso-2-naphthol as the functional group has been synthesized. The exchange-capacity of the resin for a number of metal ions such as copper(II), iron(III), cobalt(II), nickel(II), palladium(II) and uranium(VI) as a function of pH has been determined. The sorption and elution characteristics for palladium(II) and uranium(VI) have been thoroughly examined with a view to utilizing the resin for separation and concentration of uranium and palladium. Uranium(VI) has been separated from a mixture of ten other metal ions by sorption on the chelating resin and selective elution with 0.5M sodium carbonate. Palladium(II) has been separated from various metal ions by selective sorption on the resin in 1M hydrochloric acid medium.     

Radiochemical purification of microgram and sub-microgram amounts of beryllium

A method is presented for the separation and radiochemical purification of microgram and tracer amounts of beryllium from solutions. It is a four-stage ion-exchange procedure consisting of (1) selective adsorption of the beryllium onto NaDAP resin and its elution with ammonium fluoride, (2) adsorption of the fluoroberyllate complex onto an anion-exchange column and elution of the beryllium with hydrochloric acid, (3) adsorption and selective elution of the beryllium on a cation-exchange column and (4) a pass through an anion-exchange column in concentrated hydrochloric acid. The method is quantitative and requires no carrier. Decontamination factors from most radionuclides tested were greater than 10,000. The method can be used to determine beryllium-10 in environmental materials.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Chelatbildende Austauscherharze,VII

Preparation and use of a resin with 1.8-dihydroxynaphthalene-O,O-diacetic acid as chelating group are described. Besides the separation of many of the common interfering ions it also permits the separation of Hf. The following ions could be separated quantitatively: Mg(II), Pb(II), Cu(II), Fe(III), La(III), Ce(IV), Th(IV), Ti(IV), and U(VI). During these and further qualitative and quantitative experiments no interfering ions could be found. A method for the separation of⁹⁵Zr from its daughter nuclide⁹⁵Nb is also described. The main problem proved to be the separation of Zr(IV) and Hf(IV), owing to their close resemblance. To accomplish quantitative determination of Zr and Hf without any separation,⁹⁵Zr and^175+181Hf radioisotopes were used. The chelating resin permits the separation of 95% of Hf(IV) from an equimolar solution. The main part of Hf(IV) is eluated by 2M hydrochloric acid, and subsequently Zr(IV) by 0.75M oxalic acid. The rest of Hf is enriched in the first fractions of the oxalic acid eluate, so that when eliminating these, even after a single step experiment hafnium free from zirconium and a rather pure fraction of zirconium are obtained. Even under extreme conditions of concentration (Zr∶Hf=91∶1) 75% of Hf can be separated free from Zr in a single step experiment.

---

---

Vorgetragen auf der IUPAC-Tagung in Prag, 1967.