Studies on the Thermodenaturation Behavior of Bacillus subtilis α‐Amylase on Chromatographic Media

The thermodenaturation behavior of Bacillus subtilis α‐amylase on some chromatographic media was studied by determining their adsorption parameters with frontal analysis. The experimental results show that on a RP‐C₁₈ reversed‐phase medium, a Chelating Sepharose Fast‐Flow chelated by Zn²⁺ affinity medium and a WCX‐1 cation‐exchange medium, a stable conformation of α‐amylase molecule separately exists below or over 30 °C; while on a PEG‐400 hydrophobic medium and a modified PEG‐400 medium, a stable conformation of α‐amylase molecule separately exists below 40 and 30 °C, and when the experimental temperatures are separately over 40 and 30 °C, a drastically conformational change of α‐amylase molecules can continuously take place. And by combining the intrinsic fluorescence emission spectrum and thermal inactivation profile of α‐amylase in free solution and on the PEG‐400 and modified PEG‐400 hydrophobic media, it can be concluded that in liquid chromatographic procedure, chromatographic media can induce the conformational change of α‐amylase molecules and promote their thermodenaturation; and in hydrophobic interaction chromatography, the higher the hydrophobicity of chromatographic medium, the lower the conformational change temperature of α‐amylase molecules on the chromatographic medium.     

Efficient π‐conjugated interrupted host polymer by metal‐free polymerization for blue/green phosphorescent light‐emitting diodes

A new aromatic host polymer poly{[1,4‐bis(9‐decylcarbazole‐3‐yl)‐2,3,5,6‐tetrafluorobenzene‐3,3′‐diyl]‐alt‐[N‐methylisatin‐2‐one‐3,3‐diyl]} (PICzFB) containing carbazole–tetrafluorinebeneze–carbazole moiety in the π‐conjugated interrupted polymer backbone was synthesized by superacid‐catalyzed metal‐free polyhydroxyalkylation. The resulted copolymer PICzFB showed a comparatively wide band gap up to 3.32 eV and high triplet energy (E_T) of 2.73 eV due to confined conjugation by the δ? C bond interrupted polymer backbone. Blue and green light‐emitting devices with PICzFB as host, FIrpic and Ir(mppy)₃ as phosphorescent dopants showed the maximum luminous efficiencies of 5.0 and 27.6 cd/A, respectively. The results suggested that the strategy of incorporating bipolar unit into the π‐conjugated interrupted polymer backbone can be a promising approach to obtain host polymer with high triplet level for solution‐processed blue and green phosphorescent polymer light‐emitting diodes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1037–1046     

Selective α-Bromination of β-Keto Esters in Reusable PEG-400 under Mild and Catalyst-free Conditions

An efficient bromination protocol for the synthesis of α-bromo-β-keto esters has been developed. In PEG-400 （poly（ethylene glycol-400））, a variety of β-keto esters were treated with NBS （N-bromosuccinimide） at room temperature to selectively afford the corresponding α-monobromination products in excellent yields. It is noteworthy that the reaction was conducted under mild, environmentally benign and catalyst-free conditions.     

An H‐shaped polymer bonding β‐cyclodextrin at branch points: Synthesis and influences of attached β‐cyclodextrins on physical properties

We report on the synthesis of an H‐shaped polymer bonding β‐cyclodextrin (β‐CD) at branch points and influences of attached β‐CD on physical properties. First, a poly(ethylene glycol)(PEG)‐based functional macroinitiator bearing two azidos and four chlorines at chain‐ends (PEG‐2N₃(‐4Cl)) was prepared via terminal modification reactions. Then, PEG‐2N₃(‐4Cl) was applied to initiate the atom transfer radical polymerization of N‐isopropylacrylamide, leading to the synthesis of an H‐shaped block polymer with PEG as the central chain and poly(N‐isopropylacrylamide) (PNIPAM) as side‐arms (PEG‐2N₃(‐4PNIPAM)). Azido groups were at the branch points of the polymer. Finally, the click reaction between PEG‐2N₃(‐4PNIPAM) and alkynyl monosubstituted β‐cyclodextrin (β‐CD) afforded another H‐shaped polymer with two β‐CDs bonding at the polymer branch points (PEG‐2CD(‐4PNIPAM)). The glass transition temperature (T_g) and lower critical solution temperature (LCST) of the H‐shaped polymer increased after the attachment of β‐CD. The self‐assembly and thermal responsive behaviors, as well as the encapsulation behaviors of PEG‐2CD(‐4PNIPAM) were also altered. When temperature was below the LCSTs, PEG‐2N₃(‐2PNIPAM) dissolved in water molecularly, whereas PEG‐2CD(‐4PNIPAM) could self‐assemble into nano‐sized micelles. After the LCST transitions, PEG‐2N₃(‐4PNIPAM) aggregated into micron‐sized unstable particles, whereas PEG‐2CD(‐4PNIPAM) transformed into PNIPAM‐cored nanomicelles. Besides, PEG‐2CD(‐4PNIPAM) can encapsulate doxorubicin below its LCST due to the formation of micelles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

枯草杆菌α-淀粉酶在一些色谱体系中的热力学和超热力学研究

通过测定不同温度范围的热力学平衡常数、焓变、熵变、自由能变和补偿温度,研究了枯草杆菌α-淀粉酶在几种色谱介质上的热力学和超热力学。结果表明,在RP-C18反相介质、Zn2+螯合的Sepharose fast-flow亲和介质和WCX-1阳离子交换介质上,当温度分别在13-30和30-50℃范围时,它们的lnKSL分别随绝对温度的倒数线性变化;而在PEG-400和修饰的PEG-400疏水色谱介质上,当温度分别在13-40和13-30℃范围时,它们的lnKSL分别随绝对温度的倒数线性减小,但当温度分别高于40℃和30℃时,它们则随绝对温度的倒数剧烈减小。通过研究不同温度范围的焓变、熵变、自由能变和α-淀粉酶构象变化之间的关系,发现在RP-C18反相和Zn2+螯合的Sepharose fast-flow亲和介质上在30- 50 ℃温度范围内,在WCX-1阳离子交换介质上在13-30 ℃温度范围内,α-淀粉酶的吸附过程由焓变和熵变共同所支配,而在Zn2+螯合的Sepharose fast-flow亲和介质上在13- 30 ℃温度范围内,在WCX-1阳离子交换介质上在30-50 ℃温度范围和在PEG-400 和修饰的PEG-400疏水色谱介质上在13-65 ℃温度范围时,α-淀粉酶的吸附过程仅仅由熵变所控制。最后,通过α-淀粉酶在这些色谱体系中的补偿温度进一步发现,它们的焓变仅仅只能通过它们构象变化所引起的熵变所补偿。     

Gelation Rate Modulation of an α‐Cyclodextrin and Poly(ethylene glycol)‐Grafted Hyaluronic Acid Solution System by Inclusion Complexation of a Microphase‐Separated Structure

Summary: The gelation rate of a poly(ethylene glycol)‐grafted hyaluronic acid (PEG‐graft‐HA) solution with adding α‐CD was investigated in term of the microphase separation between the grafted PEG and HA. The gelation rate of PEG‐graft‐HA exhibiting the microphase‐separated structure was two times higher than that of PEG‐graft‐HA showing a homogeneous miscible state.

The formation of microphases by PEG‐graft‐HA contributes to its rapid gelation upon the addition of α‐CDs.     

Synthesis of an Amphiphilic Brush Copolymer by a Highly Efficient “Grafting onto” Approach via CO2 Chemistry

A novel and robust route for the synthesis of a new amphiphilic brush copolymer, poly(glycidyl methacrylate)‐graft‐polyethylene glycol (PGMA‐g‐PEG), with high grafting densities of 97%–98% through a “grafting onto” method via carbon dioxide chemistry is reported. PGMA‐g‐PEG can self‐assemble and form stable spherical core–shell micelles in aqueous solution. Besides, the obtained PGMA‐g‐PEG polymer contains hydroxyurethane structures as the junction sites between the PGMA backbone and PEG side chain, which can be used for further modification.

     

Thermal gelation or gel melting: (ethylene glycol)113‐(l‐alanine)12 and (ethylene glycol)113‐(l‐lactic acid)12

When PEG (M.W.～5000 Daltons) is conjugated to poly(l ‐alanine), the polymer aqueous solutions (<10.0 wt.%) undergo sol‐to‐gel (thermal gelation), whereas it is conjugated to poly(l ‐lactic acid), the polymer aqueous solutions (>30.0 wt.%) undergo gel‐to‐sol (gel melting) as the temperature increases. In the search for molecular origins of such a quite different phase behavior, poly(ethylene glycol)‐poly(l ‐alanine) (PEG‐PA; EG₁₁₃‐A₁₂) and poly(ethylene glycol)‐poly(l ‐lactic acid) (PEG‐PLA; EG₁₁₃‐LA₁₂) are synthesized and their aqueous solution behavior is investigated. PEG‐PAs with an α‐helical core assemble into micelles with a broad size distribution, and the dehydration of PEG drives the aggregation of the micelles, leading to thermal gelation, whereas increased molecular motion of the PLA core overwhelms the partial dehydration of PEG, thus gel melting of the PEG‐PLA aqueous solutions occurs. The core‐rigidity of micelles must be one of the key factors in determining whether a polymer aqueous solution undergoes sol‐to‐gel or gel‐to‐sol transition, as the temperature increases. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, , 52, 2434–2441     

Chiral,pH responsive hydrogels constructed by N‐Acryloyl‐alanine and PEGDA/α‐CD inclusion complex: preparation and chiral release ability

Chiral, pH‐responsive hydrogels are constructed by poly(ethylene glycol) diacrylate/α‐cyclodextrin (PEGDA/α‐CD) inclusion complex and L‐N‐acryloyl‐alanine or D‐N‐acryloyl‐alanine (L‐NAA or D‐NAA) by an effective free radical polymerization approach. PEGDA containing two C=C end groups was used simultaneously to introduce α‐CD units in the resulting hydrogels and to serve as a cross‐linking agent, by which forming the designed hydrogels in quantitative yield. Hydrophilic α‐CD moieties acted as pore‐forming agent, while the L(D)‐NAA‐based polymer chains bearing –COOH groups enabled the hydrogels to display remarkable swelling–deswelling behavior in response to pH variation. The chiral NAA monomer‐derived polymer chains rendered the hydrogels with intriguing optical activity, according to circular dichroism spectra. Scanning electron microscopy revealed the uniformly porous microstructures of hydrogels. More remarkably, the L‐NAA‐based hydrogels preferentially adsorbed trans‐4‐hydroxy‐d ‐proline and preferentially released trans‐4‐hydroxy‐l ‐proline, while D‐NAA‐based hydrogels provided opposite results. The hydrogels also demonstrated remarkable enantioselective release ability towards chiral drug ibuprofen. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and swelling behavior of amphiphilic comb‐like branched polymer (AA‐co‐CMS)‐g‐PMMA

Copolymerization of acrylic acid and p‐chloromethylstyrene (p‐CMS) in dioxane initiated with α,α′‐azobisisobutyronitrile was carried out to produce macroinitiator P(AA‐co‐CMS) containing PhCH₂Cl group at 65°C. Then methyl methacrylate was grafted onto P(AA‐co‐CMS) backbone using PhCH₂Cl group as an initiation site and FeCl₂/triphenyl phosphine complex as a catalyst. The resulted copolymer (AA‐co‐CMS)‐g‐PMMA with a comb‐like branched structure has a hydrophilic backbone (PAA) and hydrophobic side chains (PMMA). Compositions and structures of macroinitiator and the grafted product of P(AA‐co‐CMS)‐g‐PMMA were determined by ¹H‐NMR, infrared (IR), and gel permeation chromatography (GPC). The average graft number, the average length of branch chains, the graft ratio, and the graft efficiency were investigated. The swelling behavior of the comb‐like branched polymer was also investigated. The gradual increase of swelling ratios was accompanied by an increase of pH and temperature. The kinetic exponents indicated that the swelling transport mechanisms transformed from Fickian diffusion to non‐Fickian transport as the decreasing pH. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation and Application of Perchloric Acid Supported on Alumina (Al2O3-HClO4) to the Synthesis of α-(α-Amidobenzyl)-β-naphthols

Preparation of perchloric acid supported on alumina and its primary application as a solid supported heterogeneous catalyst to the synthesis of α-(α-amidobenzyl)-β-naphthols by a one-pot, three-component condensation of benzaldehydes, β-naphthol and acetamide or benzamide under thermal solvent-free conditions were described. The present methodology offers several advantages such as simple procedure, shorter reaction time, and excellent yields.     

Structural Versatility in Slide‐Ring Gels: Influence of Co‐Threaded Cyclodextrin Spacers

We describe a one‐pot strategy for the fabrication of novel slide‐ring (SR) gels based on supramolecular polyrotaxane structures with cyclodextrin‐derived cross‐links and additional free cyclodextrin ring spacers co‐threaded onto the polymer backbones. Photoinitiated thiol‐yne click coupling leads to facile hydrogel fabrication from pseudo‐polyrotaxanes prepared in situ from β‐cyclodextrin derivatives and bifunctional polyethylene glycol (PEG). The obtained SR gels were characterized by NMR spectroscopy using a polyrotaxane model compound with the ratio of cyclodextrin sliding spacers to PEG backbone controlled by adjusting the feed ratio of the starting materials. This structural tuning leads to dramatic changes in the rheological properties, mechanical properties, and swelling behavior of the SR gels. In addition, the coupling of simple synthetic procedures with enhanced properties offers a versatile approach to novel elastomeric materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1156–1165     

β‐Turn Analogues in Model αβ‐Hybrid Peptides: Structural Characterization of Peptides Containing β2,2Ac6c and β3,3Ac6c Residues

The effect of gem‐dialkyl substituents on the backbone conformations of β‐amino acid residues in peptides has been investigated by using four model peptides: Boc‐Xxx‐β^2,2Ac₆c(1‐aminomethylcyclohexanecarboxylic acid)‐NHMe (Xxx=Leu ( 1 ), Phe ( 2 ); Boc=tert‐butyloxycarbonyl) and Boc‐Xxx‐β^3,3Ac₆c(1‐aminocyclohexaneacetic acid)‐NHMe (Xxx=Leu ( 3 ), Phe ( 4 )). Tetrasubstituted carbon atoms restrict the ranges of stereochemically allowed conformations about flanking single bonds. The crystal structure of Boc‐Leu‐β^2,2Ac₆c‐NHMe ( 1 ) established a C₁₁ hydrogen‐bonded turn in the αβ‐hybrid sequence. The observed torsion angles (α(?≈?60°, ψ≈?30°), β(?≈?90°, θ≈60°, ψ≈?90°)) corresponded to a C₁₁ helical turn, which was a backbone‐expanded analogue of the type III β turn in αα sequences. The crystal structure of the peptide Boc‐Phe‐β^3,3Ac₆c‐NHMe ( 4 ) established a C₁₁ hydrogen‐bonded turn with distinctly different backbone torsion angles (α(?≈?60°, ψ≈120°), β(?≈60°, θ≈60°, ψ≈?60°)), which corresponded to a backbone‐expanded analogue of the type II β turn observed in αα sequences. In peptide 4 , the two molecules in the asymmetric unit adopted backbone torsion angles of opposite signs. In one of the molecules, the Phe residue adopted an unfavorable backbone conformation, with the energetic penalty being offset by a favorable aromatic interaction between proximal molecules in the crystal. NMR spectroscopy studies provided evidence for the maintenance of folded structures in solution in these αβ‐hybrid sequences.     

Thermo‐Responsive Solid‐Phase Extraction Using Poly(methyl vinyl ether)–Containing Segmented Polymer Networks

Segmented polymer networks containing poly(methyl vinyl ether) (PMVE) segments were prepared by free‐radical‐initiated copolymerization of PMVE‐α,ω‐dimethacrylate with styrene or 2‐hydroxyethyl methacrylate (HEMA). These networks were evaluated as thermo‐responsive solid‐phase extraction materials. Suspension‐derived polymer networks consisting of 80% of PMVE and 20% of HEMA adsorb toluene from an aqueous solution at 40°C and release the adsorbed toluene quantitatively at 20°C.     

Dynamic Fragility of α‐Olefin Molecular Bottlebrushes

The glass transition temperature, dynamic fragilities, and flow activation energy of a series of well‐entangled poly(α‐olefin) (PαO) molecular bottlebrushes were measured as a function of side chain length (N_sc ). The PαO bottlebrushes studied here have side chain lengths, N_sc , ranging from 4 (poly(1‐hexene)) to 10 (poly(1‐dodecene). A linear polyolefin (polypropylene), with Nsc = 1, was included in this study as a reference. The observed glassy dynamics behavior in the PαO bottlebrushes is opposite to that observed in linear polymers, namely, the glass transition temperature, the dynamic fragility, and the activation energy of structural relaxation are decreasing functions of the backbone rigidity. This anomalous behavior is due to a decrease in correlation between adjacent backbones, which is directly related to their cooperativity in the α‐relaxation, as N_sc and the concomitant distance between backbones increase. This change in conformation is also manifested as an increase in free volume and the consequent decrease in monomeric friction coefficient. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1293–1299     

Neoglycopolymers Based on 4‐Vinyl‐1,2,3‐Triazole Monomers Prepared by Click Chemistry

The synthesis of a new glycomonomer based on mannose, prepared via CuAAC, is reported. The resulting 1,2,3‐triazole linkage between mannose and the polymer backbone ensures the formation of highly stable glycopolymers, which will not undergo hydrolysis. The monomer 2′‐(4‐vinyl‐[1,2,3]‐triazol‐1‐yl)ethyl‐O‐α‐D ‐mannopyranoside was polymerized in the presence of a RAFT agent – 3‐benzylsulfanylthiocarbonylsulfanyl propionic acid – to yield well‐defined polymers with molecular weights up to 51 500 g mol^?1 and a PDI of 1.16. The resulting polymer was employed as a macroRAFT agent in the polymerization of NIPAAm in order to generate thermo‐responsive block copolymers, which undergo reversible micelle formation at elevated temperatures. The rapid interaction between the polymers prepared and ConA confirms the high affinity of these structures to proteins. While the linear glycopolymers already undergo a fast complexation with ConA, the reported rates have found to be exceeded by the micellar glycopolymer structure presented in the current contribution.

     

A hybrid‐type,chiral π‐conjugated polymer wrapped with polyhedral oligomeric silsesquioxanes

A novel hybrid‐type chiral binaphthyl‐based polyarylene derivative with polyhedral oligomeric silsesquioxanes (POSS) units 2a was prepared by Suzuki–Miyaura coupling polymerization from a chiral (R)‐6,6′‐dibromo‐2,2′‐diPOSS‐substituted 1,1′‐binaphthyl derivative 1a and p‐biphenylene diboronic acid. As a reference, a binaphthyl‐based polyarylene derivative without POSS unit 2b was also prepared. The obtained polymers were studied with thermogravimetric analysis, optical rotations, circular dichroism (CD), ultraviolet‐visible, and photoluminescence (PL) spectra. Gel permeation chromatography measurements of 2a and 2b showed that their number‐average molecular weights were 13,300 and 16,500, respectively. The thermal stability of POSS‐modified polymer 2a (temperature of 10% weight loss; T₁₀ = 380 °C) was extremely high compared with that of polymer without POSS unit 2b (T₁₀ = 335 °C) due to the siliceous bulky POSS segments on the side chains. The specific optical rotation [α]_D was ?66.7° (c 0.06, CHCl₃) for 2a and ?62.3° (c 0.06, CHCl₃) for 2b . The CD spectra showed that these two polymers had very similar and strong Cotton effects. Film polymer 2a showed almost the same PL spectrum as that in dilute CHCl₃ solution, indicating that bulky POSS units strongly suppressed intermolecular aggregation of the π‐conjugated polymer backbone. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6035–6040, 2008     

Synthesis and characterization of indenofluorene‐based copolymers containing 2,5‐bis(2‐thienyl)‐N‐arylpyrrole for bulk heterojunction solar cells and polymer light‐emitting diodes

Two novel alternating π‐conjugated copolymers, poly[2,8‐(6,6′,12,12′‐tetraoctyl‐6,12‐dihydroindeno‐[1,2b]fluorene‐ alt‐5(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole) ( P1 ) and poly[2,8‐(6,6′,12,12′‐tetraoctyl‐6,12‐dihydroindeno‐[1,2b]fluorene‐ alt‐5(1‐(p‐octylphenyl)‐2,5‐di(2‐thienyl)pyrrole) ( P2 ), were synthesized via the Suzuki coupling method and their optoelectronic properties were investigated. The resulting polymers P1 and P2 were completely soluble in various common organic solvents and their weight‐average molecular weights (M_w) were 5.66 × 10⁴ (polydispersity: 1.97) and 2.13× 10⁴ (polydispersity: 1.54), respectively. Bulk heterojunction (BHJ) solar cells were fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM(1:5)/TiO_x/Al configurations. The BHJ solar cell with P1 :PC₇₀BM (1:5) has a power conversion efficiency (PCE) of 1.12% (J_sc= 3.39 mA/cm², V_oc= 0.67 V, FF = 49.31%), measured using AM 1.5 G solar simulator at 100 mW/cm² light illumination. We fabricated polymer light‐emitting diodes (PLEDs) in ITO/PEDOT:PSS/emitting polymer:polyethylene glycol (PEG)/Ba/Al configurations. The electroluminescence (EL) maxima of the fabricated PLEDs varied from 526 nm to 556 nm depending on the ratio of the polymer to PEG. The turn‐on voltages of the PLEDs were in the range of 3–8 V depending on the ratio of the polymer to PEG, and the maximum brightness and luminance efficiency were 2103 cd/m² and 0.37 cd/A at 12 V, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3169–3177, 2010     

Helical Poly(α,β‐unsaturated ketone) with Bulky Pendant of Binaphthyl from Anionic Polymerization of ((−)‐Menthyl (S)‐6′‐Acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate

((?)‐Menthyl (S)‐6′‐acrylyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate ( 3 ) was synthesized and anionically polymerized using n‐BuLi as an initiator in toluene. The monomer 3 was levorotatory and had an [α]_D²⁵ value of ?72.4, but its corresponding polymer poly‐ 3 was dextrorotatory and showed an [α]_D²⁵ value of +162.0. Poly‐ 3 was confirmed to exist in the form of one‐handed helical structure in solution by means of comparing the specific optical rotation and the CD spectra with that of 3 and the model compounds such as (?)‐menthyl (S)‐6′‐propionyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2b and (?)‐menthyl (S)‐6′‐heptanoyl‐2′‐methyloxy‐1,1′‐binaphthalene‐2‐carboxylate 2c . This conclusion was also confirmed by the fact that the g‐value of poly‐ 3 is about 11 times of that of monomer 3 .     

Cationic ring‐opening polymerization of 1,6‐anhydro‐2,3,4‐tri‐O‐allyl‐β‐D‐glucopyranose as a convenient synthesis of dextran

For the convenient synthesis of (1→6)‐α‐D ‐glucopyranan, i. e., dextran ( 4 ), ring‐opening polymerization of 1,6‐anhydro‐2,3,4‐tri‐O‐allyl‐β‐D ‐glucopyranose ( 1 ) has been carried out using BF₃·OEt₂. With a ratio of [BF₃·OEt₂]/[ 1 ] = 0.5 at 0 °C for 140 h, the yield and M_n of the obtained polymer are 84.0% and 21 700, respectively. The polymer consists of (1→6)‐α‐linked 2,3,4‐tri‐O‐allyl‐D ‐glucopyranose ( 2 ) which is similar to the results for the cationic ring‐opening polymerization of 1,6‐anhydro‐2,3,4‐tri‐O‐methyl‐β‐D ‐glucopyranose and 1,6‐anhydro‐2,3,4‐tri‐O‐ethyl‐β‐D ‐glucopyranose. Polymer 2 was isomerized using tris(triphenylphosphine)‐chlororhodium as the catalyst in toluene/ethanol/water to yield polymeric 2,3,4‐tri‐O‐propenyl‐(1→6)‐α‐D ‐glucopyranan ( 3 ). Deprotection of the propenyl ether linkage of 3 was then performed using hydrochloric acid in acetone to give 4 .