Fluorene: An extended experimental thermodynamic study

This work reports new experimental thermodynamic results on fluorene. Vapor pressures of both crystalline and liquid phases were measured using a pressure gauge (capacitance diaphragm manometer) and Knudsen effusion methods over a wide temperature range (292.20 to 412.16) K yielding accurate determination of enthalpy and entropy of sublimation and of vaporization. The enthalpy of sublimation was also determined using Calvet microcalorimetry. The enthalpy of fusion was derived from vapor pressure results and from d.s.c. experiments. Static bomb calorimetry was used to determine the enthalpy of combustion of fluorene from which the standard enthalpy of formation in the crystalline phase was calculated. The enthalpy of formation in the gaseous phase was calculated combining the result derived for the crystalline phase with the enthalpy of sublimation.     

Solid vapor pressure for five heavy PAHs via the Knudsen effusion method

Polycyclic aromatic hydrocarbons (PAHs) are compounds resulting from incomplete combustion and many fuel processing operations, and they are commonly found as subsurface environmental contaminants at sites of former manufactured gas plants. Knowledge of their vapor pressures is the key to predict their fate and transport in the environment. The present study involves five heavy PAHs, i.e. benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and dibenz[a,h]anthracene, which are all as priority pollutants classified by the US EPA. The vapor pressures of these heavy PAHs were measured by using Knudsen effusion method over the temperature range of 364 K to 454 K. The corresponding values of the enthalpy of sublimation were calculated from the Clausius-Clapeyron equation. The enthalpy of fusion for the 5 PAHs was also measured by using differential scanning calorimetry and used to convert earlier published sub-cooled liquid vapor pressure data to solid vapor pressure in order to compare with the present results. These adjusted values do not agree with the present measured actual solid vapor pressure values for these PAHs, but there is good agreement between present results and other earlier published sublimation data.     

Thermochemical Study of 1-Methylhydantoin

Using static bomb combustion calorimetry, the combustion energy of 1-methylhydantoin was obtained, from which the standard molar enthalpy of formation of the crystalline phase at T = 298.15 K of the compound studied was calculated. Through thermogravimetry, mass loss rates were measured as a function of temperature, from which the enthalpy of vaporization was calculated. Additionally, some properties of fusion were determined by differential scanning calorimetry, such as enthalpy and temperature. Adding the enthalpy of fusion to the enthalpy of vaporization, the enthalpy of sublimation of the compound was obtained at T = 298.15 K. By combining the enthalpy of formation of the compound in crystalline phase with its enthalpy of sublimation, the respective standard molar enthalpy of formation in the gas phase was calculated. On the other hand, the results obtained in the present work were compared with those of other derivatives of hydantoin, with which the effect of the change of some substituents in the base heterocyclic ring was evaluated.     

Thermochemical and structural study of a dibenzocycloheptane cyanoenamine

The crystalline and gas phase enthalpy of formation of 5-cyano-7H-dibenzo-[a,c]-cyclohepten-6-amine (1) (142.0 ± 11.6 and 264 ± 20 kJ mol^?1, respectively) are reported. The sublimation enthalpy at T = 298.15 K for this compound was evaluated by combining the fusion enthalpy from DSC measurements adjusted to 298 K with estimated vaporization enthalpy. The experimental enthalpy of formation is discussed in relationship with values calculated at the G3(MP2)//B3LYP level of quantum chemical theory and by means of group additivity. The crystal structure of this compound was determined by X-ray crystallography and shown to exist entirely in the cyanoenamine form 1, i.e. not the tautomeric α-cyanoimine 2.     

Recommended sublimation pressure and enthalpy of benzene

Recommended vapor pressures of solid benzene (CAS Registry Number: 71-43-2) which are consistent with thermodynamically related crystalline and ideal-gas heat capacities as well as with properties of the liquid phase at the triple point temperature (vapor pressure, enthalpy of vaporization) were established. The recommended data were developed by a multi-property simultaneous correlation of vapor pressures and related thermal data. Vapor pressures measured in this work using the static method in the temperature range from 233 K to 260 K, covering pressure range from 99 Pa to 1230 Pa, were included in the simultaneous correlation. The enthalpy of sublimation was established with uncertainty significantly lower than the previously recommended values.     

Thermodynamic study of phase transitions in methyl esters of ortho- meta- and para-aminobenzoic acids

A static method based on capacitance gauges was used to measure the vapor pressures of the condensed phases of the methyl esters of the three aminobenzoic acids. For methyl o-aminobenzoate the vapor pressures of the liquid phase were measured in the range (285.4 to 369.5) K. For the meta and para isomers vapor pressures of both crystalline and liquid phases were measured in the ranges (308.9 to 376.6) K, and (332.9 to 428.0) K, respectively. Vapor pressures of the latter compound were also measured using the Knudsen effusion method in the temperature range (319.1 to 341.2) K.From the dependence of the vapor pressures on the temperature, the standard molar enthalpies and entropies of sublimation and of vaporization were derived. Differential scanning calorimetry was used to measure the temperatures and molar enthalpies of fusion of the three isomers. The results enabled the estimation of the enthalpy of the intermolecular (N−H^…O) hydrogen bond in the crystalline methyl p-aminobenzoate. A correlation relating the temperature of fusion and the enthalpy and Gibbs energy of sublimation of benzene, methyl benzoates and benzoic acids was derived.     

Di-hydroxybenzenes: Catechol, resorcinol, and hydroquinone: Enthalpies of phase transitions revisited

Molar enthalpies of sublimation of 1,2-di-hydroxybenzene, 1,3-di-hydroxybenzene, and 1,4-di-hydroxybenzene were obtained from the temperature dependence of the vapor pressure measured by the transpiration method. The molar enthalpies of fusion of 1,2- and 1,4-isomers were measured by differential scanning calorimetry (DSC). A large number of the primary experimental results on the temperature dependences of vapor pressure and phase transitions have been collected from the literature and have been treated in a uniform manner in order to derive sublimation, vaporization and fusion enthalpies of di-hydroxybenzenes at the reference temperature 298.15 K. The data sets on phase transitions were checked for internal consistency. This collection together with the new experimental results reported here has helped to resolve contradictions in the available thermochemical data and to recommend consistent and reliable sublimation, vaporization and fusion enthalpies for all three isomers under study.     

Dibenzofuran and methyldibenzofuran derivatives: assessment of thermochemical data

Thermochemical data of dibenzofuran, a compound of considerable industrial and environmental significance, obtained from experimental calorimetric and computational techniques are reported in this work. The enthalpy of fusion, (19.4 ± 1.0) kJ mol^?1, at the temperature of fusion, (355.52 ± 0.02) K, was determined by differential scanning calorimetry measurements of dibenzofuran. From the standard (p° = 0.1 MPa) molar enthalpies of formation of crystalline dibenzofuran, (?29.2 ± 3.8) kJ mol^?1, and of sublimation, (84.5 ± 1.0) kJ mol^?1, determined at T = 298.15 K by static bomb combustion calorimetry and by vacuum drop microcalorimetry, respectively, it was possible to calculate the enthalpy of formation of the gaseous compound, (55.0 ± 3.9) kJ mol^?1, at the same temperature. The enthalpy of formation in the gaseous phase was also determined from G3(MP2)//B3LYP calculations. The same computational strategy was employed in the calculation of the standard molar enthalpies of formation, at T = 298.15 K, in the gas-phase, of single methylated derivatives of benzofuran and dibenzofuran.     

Thermogravimetric method for a rapid estimation of vapor pressure and vaporization enthalpies of disubstituted benzoic acids: an attempt to correlate vapor pressures and vaporization enthalpies with structure

A rapid estimation of vapor pressure and vaporization enthalpies of some disubstituted benzoic acids (2,4-dihydroxybenzoic acid (2,4-DHBA), 2,6-dihydroxybenzoic acid (2,6-DHBA), 3,4-dihydroxybenzoic acid (3,4-DHBA), 2,4-dinitrobenzoic acid (2,4-DNBA), 3,4-dinitrobenzoic acid (3,4-DNBA), 2,5-dibromobenzoic acid (2,5-DBBA), and 3,5-dibromobenzoic acid (3,5-DBBA)) was made using a simultaneous TG/DSC apparatus operating with aluminum open crucibles under inert atmosphere in both isothermal and non-isothermal mode. No evidence of thermal decomposition (in the form of endo or exothermic effect) was found during each experiment. Vapor pressure was obtained in the range from some tenth to some hundreds of Pa after calibration with benzoic acid. All operative conditions (sample mass, temperature rage, and purge gas flow) were carefully checked in order to obtain reliable results. Internal consistency of the results obtained was checked by comparing the sublimation enthalpy obtained by the sum of the vaporization enthalpies derived by the global NITG and ITG data, the melting enthalpies from DSC adjusted at 298.15 using the molar isobaric heat capacities of both solid and liquid estimated according to a group additivity approach and that obtained from the sublimation enthalpies determined by torsion effusion corrected at 298.15 K using the same approach. Finally, some comments concerning the relationship between energetics and structure (substituent effect) are also reported.     

An examination of the vaporization enthalpies and vapor pressures of pyrazine, pyrimidine, pyridazine, and 1,3,5-triazine

The vaporization enthalpies and liquid vapor pressures from T = 298.15 K to T = 400 K of 1,3,5-triazine, pyrazine, pyrimidine, and pyridazine using pyridines and pyrazines as standards have been measured by correlation-gas chromatography. The vaporization enthalpies of 1,3,5-triazine (38.8 ± 1.9 kJ mol⁻¹) and pyrazine (40.5 ± 1.7 kJ mol⁻¹) obtained by these correlations are in good agreement with current literature values. The value obtained for pyrimidine (41.0 ± 1.9 kJ mol⁻¹) can be compared with a literature value of 50.0 kJ mol⁻¹. Combined with the condensed phase enthalpy of formation in the literature, this results in a gas-phase enthalpy of formation, Δ_f H _m (g, 298.15 K), of 187.6 ± 2.2 kJ mol⁻¹ for pyrimidine, compared to a value of 195.1 ± 2.1 calculated for pyrazine. Vapor pressures also obtained by correlation are used to predict boiling temperatures (BT). Good agreement with experimental BT (±4.2 K) including results for pyrimidine is observed for most compounds with the exception of the pyridazines. The results suggest that compounds containing one or two nitrogen atoms in the ring are suitable standards for correlating various heterocyclic compounds provided the nitrogen atoms are isolated from each other by carbon. Pyridazines do not appear to be evaluated correctly using pyridines and pyrazines as standards.     

Thermodynamic study on the sublimation of diphenyl and triphenyl substituted acetic and propanoic acids

Knudsen mass-loss effusion technique was used for measuring the vapor pressures at different temperatures of the following crystalline compounds: diphenylacetic acid, between 357.27 and 379.08 K; triphenylacetic acid, between 418.98 and 436.97 K; 2,2-diphenylpropanoic acid, between 366.08 and 386.00 K; 3,3-diphenylpropanoic acid, between 366.09 and 386.03 K; 3,3,3-triphenylpropanoic acid, between 402.17 and 420.10 K. From the temperature dependence of the vapor pressure of each crystalline compound, the standard (p ⁰ = 10⁵ Pa) molar enthalpies and Gibbs energies of sublimation, at T = 298.15 K, were derived. The measured thermodynamic properties are compared with literature results for phenylacetic and phenylpropanoic acids and correlations for estimation of the vapor pressures from the enthalpy of sublimation and the temperature of fusion of these and other compounds are presented.     

Thermodynamic parameters of vaporization of EuBr2

The vaporization process of europium dibromide was studied using high-temperature mass spectrometry. It was ascertained that saturated vapor in temperature range of 1049–1261 K was represented mainly by EuBr₂ molecules; the fraction of dimer molecules Eu₂Br₄ was less than 1%. Heat capacities of solid and liquid europium dibromide, as well as the melting enthalpy were measured by means of differential scanning calorimetry in temperature range 300–1100 K; using these data thermodynamic functions for EuBr₂ in condensed state were calculated. For all experimental data, including the literature data, thermodynamic characteristics of the vaporization of europium dibromide were determined using a unified set of thermodynamic functions according to the methods of the second and third laws of thermodynamics. The value of Δ_s H ^o(298.15 K) = 354 ± 5 kJ/mol was recommended for the reaction of sublimation of EuBr₂(cr.) = EuBr₂.     

The thermodynamic properties of S-lactic acid

The enthalpies of combustion and formation of S-lactic acid at 298.15 K, Δ_c H _m^o(cr.) = −1337.9 ± 0.8 and Δ_f H _m^o(cr.) = −700.1 ± 0.9 kJ/mol, were determined by calorimetry. The temperature dependence of acid vapor pressure was studied by the transpiration method, and the enthalpy of its vaporization was obtained, Δ_vap H ^o(298.15 K) = 69.1 ± 1.0 kJ/mol. The temperature and enthalpy of fusion, T _m (330.4 K) and Δ_m H ^o(298.15 K) = 14.7 ± 0.2 kJ/mol, were determined by differential scanning calorimetry. The enthalpy of formation of the acid in the gas phase was obtained. Ab initio methods were used to perform a conformational analysis of the acid, calculate fundamental vibration frequencies, moments of inertia, and total and relative energies of the stablest conformers. Thermodynamic properties were calculated in the ideal gas state over the temperature range 0–1500 K. A thermodynamic analysis of mutual transformation processes (the formation of SS- and RS(meso)-lactides from S-lactic acid and the racemization of these lactides) and the formation of poly-(RS)-lactide from S-lactic acid and SS- and RS(meso)-lactides was performed.     

Vapor pressure and heat capacities of perfluoro-<Emphasis Type="Italic">N</Emphasis>-(4-methylcyclohexyl)piperidine

Heat capacities of perfluoro-N-(4-methylcyclohexyl)piperidine (PMCP) have been measured by low-temperature adiabatic calorimetry. The purity of the compound, its triple-point temperature, and its enthalpy and entropy of fusion have been determined. The saturated vapor pressure was determined by comparative ebulliometry as a function of temperature in the 6.2–101.6 kPa pressure range and 374.2–460.9 K temperature range. The calorimetric enthalpy of vaporization at T = 298.15 K has been measured. The following thermodynamic properties were calculated for PMCP: normal boiling temperature, enthalpy of vaporization Δ_vap H _m ⁰ (T) as a function of temperature, and critical parameters. The enthalpies of vaporization at 298.15 K obtained experimentally and by calculation methods match within their error limits, which validates their adequacy and the adequacy of the Δ_vap H _m ⁰ = f(T) equation as an extrapolation.     

Thermodynamic Stability of Fenclorim and Clopyralid

The present work reports an experimental thermodynamic study of two nitrogen heterocyclic organic compounds, fenclorim and clopyralid, that have been used as herbicides. The sublimation vapor pressures of fenclorim (4,6-dichloro-2-phenylpyrimidine) and of clopyralid (3,6-dichloro-2-pyridinecarboxylic acid) were measured, at different temperatures, using a Knudsen mass-loss effusion technique. The vapor pressures of both crystalline and liquid (including supercooled liquid) phases of fenclorim were also determined using a static method based on capacitance diaphragm manometers. The experimental results enabled accurate determination of the standard molar enthalpies, entropies and Gibbs energies of sublimation for both compounds and of vaporization for fenclorim, allowing a phase diagram representation of the (p,T) results, in the neighborhood of the triple point of this compound. The temperatures and molar enthalpies of fusion of the two compounds studied were determined using differential scanning calorimetry. The standard isobaric molar heat capacities of the two crystalline compounds were determined at 298.15 K, using drop calorimetry. The gas phase thermodynamic properties of the two compounds were estimated through ab initio calculations, at the G3(MP2)//B3LYP level, and their thermodynamic stability was evaluated in the gaseous and crystalline phases, considering the calculated values of the standard Gibbs energies of formation, at 298.15 K. All these data, together with other physical and chemical properties, will be useful to predict the mobility and environmental distribution of these two compounds.     

Calorimetric and computational study of indanones

Condensed phase standard (p degrees = 0.1 MPa) molar enthalpies of formation for 1-indanone, 2-indanone, and 1,3-indandione were derived from the standard molar enthalpies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The standard molar enthalpies of sublimation for 1-indanone and 2-indanone, at T = 298.15 K, were measured both by correlation-gas chromatography and by Calvet microcalorimetry leading to a mean value for each compound. For 1,3-indandione, the standard molar enthalpy of sublimation was derived from the vapor pressure dependence on temperature. The following enthalpies of formation in gas phase, at T = 298.15 K, were then derived: 1-indanone, -64.0 +/- 3.8 kJ mol(-1); 2-indanone, -56.6 +/- 4.8 kJ mol(-1); 1,3-indandione, -165.0 +/- 2.6 kJ mol(-1). The vaporization and fusion enthalpies of the indanones studied are also reported. In addition, theoretical calculations using the density functional theory with the B3LYP and MPW1B95 energy functionals and the 6-311G** and cc-pVTZ basis sets have been performed for these molecules and the corresponding one-ring species to obtain the most stable geometries and to access their energetic stabilities.     

Vapor pressures and PVT properties of 1,1,1,3,3-pentafluoropropane (HFC-245fa)

The vapor pressures and PVT properties of superheated vapor and compressed liquid of 1,1,1,3,3-pentafluoropropane (HFC-245fa) were measured at wide range of temperature and pressure. The simple correlation for vapor pressures, compressibility factors of superheated vapor and specific volumes of liquid were developed on the basis of the present measurements. The critical pressure was calculated by extrapolating the developed vapor pressure equation to the critical temperature. Isothermal compressibility of liquid was calculated from the developed Tait equation. Specific volume data obtained show the good linearity in the Hudleston plots. Overall uncertainty in the vapor pressure, compressibility factor and specific volume measurements is estimated less than ±5 kPa, ±1.2% and ±0.09%, respectively.     

Solubility, Solvation and Distribution of Novel Spiro-Derivatives of 1,3-Thiazine in Aqueous and Organic Solutions

Novel drug-like spiro-derivatives of 1,3-thiazine were synthesized. Thermodynamic aspects of sublimation processes of the studied compounds were determined using temperature dependencies of the vapor pressures. Thermophysical characteristics of the molecular crystals were obtained and compared with the sublimation and structural parameters. Solubilities of spiro-derivatives in buffer and hexane were measured in the temperature interval 298.15–315.15 K by an isothermal saturation method. Temperature dependencies of partition coefficients for the studied substances in the systems buffer/organic phase were obtained. Thermodynamic functions describing the solubility, solvation and distribution processes were calculated. The diagram enabling analysis of the mechanism of transfer process was applied.     

Thermodynamic functions of lactones in the gaseous state

The temperature dependences of the vapor pressures of oxacyclobutan-2-one and oxacyclopentan-2-one were measured by the transpiration method. The entropies of gaseous oxacycloalkan-2-ones (lactones) were determined based on the experimental values of entropy in the condensed state, vapor pressure, and enthalpy of vaporization. Thermodynamic functions of lactones with a ring size of n = 4—8 (number of atoms in the ring) were determined by quantum chemistry and statistical physics methods in the ideal gas approximation taking into account the molar fractions of all conformers and optical isomers in the temperature range from 298.15 to 1500 K. The enthalpies of ring strain were calculated based on the enthalpies of formation.     

Vapor pressures and vaporization enthalpy of codlemone by correlation gas chromatography

The vapor pressure and vaporization enthalpy of codlemone (trans, trans 8,10-dodecadien-1-ol), the female sex hormone of the codling moth is evaluated by correlation gas chromatography using a series of saturated primary alcohols as standards. A vaporization enthalpy of (92.3 ± 2.6) kJ · mol⁻¹ and a vapor pressure, p/Pa = (0.083 ± 0.012) were evaluated at T = 298.15 K. An equation for the evaluation of vapor pressure from ambient temperature to boiling has been derived by correlation for codlemone. The calculated boiling temperature of T_B = 389 K at p = 267 Pa is within the temperature range reported in the literature. A normal boiling temperature of T_B = (549.1 ± 0.1) K is also estimated by extrapolation.