Synthesis and Molecular Structure of Two Zinc Complexes of 1,2‐Bis[(trimethylsilyl)imino]acenaphthene

The reaction of 1,2‐bis[(trimethylsilyl)imino]acenaphthene ( 1 , tms‐BIAN) with ZnCl₂ and ZnI₂ in THF and Et₂O afford (tms‐BIAN)ZnCl₂ ( 2 ) and (tms‐BIAN)ZnI₂ ( 3 ), respectively. The compounds 2 and 3 were characterized by IR‐ and NMR spectroscopy as well as by single crystal X‐ray analysis.     

C‐O Bond Cleavage of Diethyl Ether and Tetrahydrofurane by [(dpp‐BIAN)AlI(Et2O)] [dpp‐BIAN = 1,2‐bis[(2,6‐di‐iso‐propylphenyl)‐imino]acenaphthene]

At elevated temperatures, the aluminum complex [(dpp‐BIAN)AlI(Et₂O)] ( 1 ) splits the C‐O bonds of diethyl ether and tetrahydrofurane yielding the dimeric alkoxides [(dpp‐BIAN)AlOEt]₂ ( 2 ) and [(dpp‐BIAN)AlO(CH₂)₄I]₂ ( 3 ), respectively. Already at ambient temperatures, a cleavage of the C‐O bond of THF is to observe in the reaction of 1 with CpNa in THF as confirmed by the formation of [(dpp‐BIAN)AlO(CH₂)₄C₅H₅]₂ ( 4a ) and [(dpp‐BIAN)Al{O(CH₂)₄C₅H₅}(THF)] ( 4b ) in a molar ratio of 1:2. The reaction of 1 with t‐BuOK affords the monomeric alkoxide [(dpp‐BIAN)AlO‐t‐Bu(Et₂O)] ( 5 ). Compounds 2 , 3 , and 4a/b were characterized by elemental analyses and IR spectra. Additionally, the structures of 2 and 3 were determined by single crystal X‐ray diffraction.     

Solvent‐free alkali and alkaline earth metal complexes of di‐imine ligands

Compound [(dph‐BIAN)Mg(THF)]₂ ( 2 ) was prepared by reacting magnesium metal with 1,2‐bis[(2‐biphenyl)imino]acenaphthene (dph‐BIAN) in THF, followed by crystallization from toluene. Reaction of CaI₂ with (dpp‐BIAN)Li₂ in toluene afforded [(dpp‐BIAN)Li]₂Ca ( 3 ) (dpp‐BIAN = 1,2‐bis[(2,6‐diisopropylphenyl)imino]acenaphthene). Both complexes 2 and 3 were characterized by single crystal X‐ray diffraction. The ¹H NMR spectroscopic data obtained for complex 3 in toluene solution indicated an agostic interaction between the methyl groups of the ligand and lithium atoms. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:663–670, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20168     

Magnesium and calcium complexes with two diimine radical-anion ligands. Molecular structure of the Ca complex with 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene

Four- and five-coordinate magnesium and calcium complexes containing two diimine radical-anion ligands with compositions (dpp-BIAN)₂Mg (1), (dpp-BIAN)₂Ca (2), (dtb-BIAN)₂Mg (3), and (dtb-BIAN)₂Ca(THF) (4) (dpp-BIAN is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene and dtb-BIAN is 1,2-bis[(2,5-di-tert-butylphenyl)imino]acenaphthene) were synthesized. At 120 K, the ESR spectra of complexes 1–4 in a toluene matrix show signals characteristic of biradical derivatives. The molecular structure of compound 2 was established by X-ray diffraction analysis. At 293 K, the magnetic moments of compounds 1, 2, 3, and 4 are 2.55, 2.57, 2.76, and 2.79 μ_B, respectively, which are indicative of the presence of two unpaired electrons localized on the ligands.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2051–2055, October, 2004.     

1,8‐Bis[(dimethoxy)phosphino]naphthalene: A New Bis‐phosphonite Ligand with a Rigid C3‐Backbone and Unexpected Reaction Chemistry

1,8‐Bis[(diethylamino)phosphino]naphthalene ( 1 ) reacted with dry methanol in dichloromethane to form the new bis‐phosphonite ligand 1,8‐bis[(dimethoxy)phosphino]naphthalene (dmeopn, 2 ). By oxidation of 2 with H₂O₂ · (H₂N)₂C(:O) the corresponding bis‐phosphonate, 1,8‐bis[(dimethoxy)phosphoryl]naphthalene ( 3 ), was obtained quantitatively. Reaction of 3 with phosphorus trichloride unexpectedly furnished a 2.4 : 1 mixture of the bis‐phosphonate anhydrides rac‐ and meso‐1,3‐dimethoxy‐1,3‐dioxo‐2,3‐dihydro‐1,3‐diphospha‐2‐oxaphenalene (rac‐ 4 and meso‐ 4 ) from which rac‐ 4 could be fractionally crystallised. The bis‐phosphonite 2 behaved as a normal bidentate chelate ligand towards Mo⁰ and Pd^II, and furnished the complexes [(dmeopn)Mo(CO)₄] ( 5 ) and [(dmeopn)PdCl₂] ( 6 ) when treated with [(nor)Mo(CO)₄] or [(cod)PdCl₂] (nor = norbornadiene, cod = cycloocta‐1,8‐diene). Attempts to prepare 1,8‐diphosphinonaphthalene ( 7 ) by reducing 2 or 3 with LiAlH₄ or LiAlH₄/TMSCl (1 : 1) (TMSCl = trimethyl chlorosilane) in THF led to inseparable mixtures of phosphorus‐containing products. Compounds 2 – 6 were characterised by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy, IR spectroscopy, mass spectrometry and elemental analysis. X‐ray crystal structure analyses were carried out for the bis‐phosphonate anhydride rac‐ 4 and the palladium(II) complex 6 . The geometry of compound rac‐ 4 , in which the phosphorus atoms are connected by an oxygen atom, reveals a relief of strain from the bis‐phosphine 1 , whereas the 1,8‐P,P′‐naphthalenediyl group in 6 is surprisingly distorted; the P atoms are displaced from the naphthalene best plane by –46.7 and 54.5 pm.     

Syntheses, structures and antimicrobial activities of bis(imino)acenaphthene (BIAN) imidazolium salts

The syntheses of four new bis(imino)acenaphthene (BIAN) imidazolium chlorides are reported, three of which have been structurally characterized. The synthesis of a new, structurally authenticated BIAN ligand is also described. We report the results of the use of these BIAN imidazolium salts as antimicrobials against the pathogens S. aureus, B. subtilis, E. coli and P. aeruginosa. The antimicrobial efficacies were particularly high for the N-(2,6-diisopropylphenyl)- and N-(mesityl)-substituted BIAN imidazolium salts (MIC values < 0.6 μg/mL).     

Synthesis and Structure of the Cerium Schiff‐Base Complexes [Ce(Salen′)2] and [(THF)2KCe(Salen′)2]

The synthesis of [Ce(Salen′)₂] ( 1 ) (H₂Salen′ = N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)ethylenediamine) was performed using two different approaches. CeCl₃ reacts with two equivalents of K₂Salen′ in THF under the formation of [(THF)₂KCe(Salen′)₂] ( 2 ). Complex 2 could be converted to the Ce^IV complex 1 via oxidation with p‐benzoquinone and air, respectively. The reversible reduction process was realized using elemental potassium in boiling THF. Furthermore, the reaction of the Ce^IV starting material [(^tBuO)₄Ce(THF)₂] with the “free” ligand H₂Salen′ in boiling toluene lead in the formation of 1 as well.     

Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

New high-spin iron complexes based on bis(imino)acenaphthenes (BIAN): synthesis,structure, and magnetic properties

The reactions of iron diiodide with one and two equivalents of the monopotassium salt of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (dpp-BIAN) in diethyl ether gave the complexes [(dpp-BIAN)FeI]₂ (1) and (dpp-BIAN)₂Fe (2), respectively. The bis-ligand complex (tms-BIAN)₂Fe (3) was synthesized by the exchange reaction of the monosodium salt of 1,2-bis(trimethylsilylimino)acenaphthene (tms-BIAN) with iron diiodide. The reaction of FeI₂ with tms-BIAN affords the chelate complex (tms-BIAN)FeI₂ (4), whereas the reaction of FeBr₂·2H₂O with tms-BIAN is accompanied by elimination of trimethylsilyl groups to form the tris-ligand acenaphthene-1,2-diimine complex [(H₂BIAN)₃Fe][FeBr₃·THF]₂ (5) containing two types of iron ions. Compounds 1–5 were characterized by IR spectroscopy and elemental analysis. The molecular structures of 1–5 were determined by single-crystal X-ray diffraction. For high-spin complexes 1–3, the temperature-dependent magnetic susceptibilities were measured in the range of 4–300 K.     

Aluminum Complexes Stabilized by Piperazidine‐Bridged Bis(phenolate) Ligands: Syntheses,Structures, and Application in the Ring‐Opening Polymerization of ε‐Caprolactone

The synthesis and characterization of aluminum alkoxide and alkyl complexes stabilized by piperazidine‐bridged bis(phenolate) ligands are described. Treatment of ligand precursors H₂[ONNO]¹ {H₂[ONNO]¹=1,4‐bis(2‐hydroxy‐3‐tert‐butyl‐5‐methylbenzyl)piperazidine} and H₂[ONNO]² {H₂[ONNO]²=1,4‐bis(2‐hydroxy‐3,5‐di‐tert‐butylbenzyl)piperazidine} with AlEt₂(OCH₂Ph) and AlEt₂(OPr‐i), which were generated in situ by the reactions of AlEt₃ with equivalent of the corresponding alcohols, in a 1:1 molar ratio in THF gave the corresponding aluminum alkoxide complexes [ONNO]¹Al(OCH₂Ph) ( 1 ) and [ONNO]²Al(OPr‐i) ( 2 ), respectively. The reaction of H₂[ONNO]¹ with AlEt₂(OCH₂Ph) in a 1:2 molar ratio in THF afforded a mixture of monometallic aluminum ethyl complex [ONNO]¹AlEt ( 3 ) and complex 1 , which can be isolated by stepwise crystallization. Similarly, H₂[ONNO]² reacted with AlEt₂(OPr‐i) in a 1:2 molar ratio in THF to give a mixture of aluminum ethyl complex [ONNO]²AlEt ( 4 ) and complex 2 . Complexes 1 and 2 were also available via treatment of complexes 3 and 4 with 1 equiv. of benzyl alcohol and isopropyl alcohol, respectively. All of these complexes were fully characterized including X‐ray structural determination. It was found that complexes 1 to 4 can initiate the ring‐opening polymerization of ε‐caprolactone, and complexes 1 and 2 showed higher catalytic activity in comparison with complexes 3 and 4 .     

Synthesis,characterization, and crystal structures of organonickel(II) complexes coordinated to novel 1‐bromo‐2,6‐bis{[(λ5‐phosphanylidene)imino]methyl}benzene NCN‐pincer ligands

A novel family of four 1‐bromo‐2,6‐bis{[(λ⁵‐phosphanylidene)imino]methyl}benzene ligands has been synthesized and characterized. The phosphiniminomethyl substituents are decorated with either three phenyl groups, two phenyl and one cyclohexyl group, one phenyl and two cyclohexyl groups, or three cyclohexyl groups. Each ligand was metallated using zero‐valent nickel through an oxidative addition to form a family of organonickel(II) complexes, namely (2,6‐bis{[(triphenyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II) dichloromethane hemisolvate, [NiBr(C₄₄H₃₇N₂P₂)]·0.5CH₂Cl₂, (2,6‐bis{[(cyclohexyldiphenyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II) diethyl ether hemisolvate, [NiBr(C₄₄H₄₉N₂P₂)]·0.5C₄H₁₀O, (2,6‐bis{[(dicyclohexylphenyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II), [NiBr(C₄₄H₆₁N₂P₂)], and (2,6‐bis{[(tricyclohexyl‐λ⁵‐phosphanylidene)imino]methyl}phenyl‐κ³N,C¹,N′)bromidonickel(II), [NiBr(C₄₄H₇₃N₂P₂)]. This family of complexes represents a useful opportunity to investigate the impact of incrementally changing the steric characteristics of a complex on its structure and reactivity.     

Structural studies of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine hetero‐scorpionate copper complexes

The structures of five compounds consisting of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine complexed with copper in both the Cu^I and Cu^II oxidation states are presented, namely chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(I) 0.18‐hydrate, [CuCl(C₁₅H₁₇N₃)]·0.18H₂O, (1), catena‐poly[[copper(I)‐μ₂‐(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ⁵N,N′,N′′:C²,C³] perchlorate acetonitrile monosolvate], {[Cu(C₁₅H₁₇N₃)]ClO₄·CH₃CN}_n, (2), dichlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) dichloromethane monosolvate, [CuCl₂(C₁₅H₁₇N₃)]·CH₂Cl₂, (3), chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) perchlorate, [CuCl(C₁₅H₁₇N₃)]ClO₄, (4), and di‐μ‐chlorido‐bis({(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II)) bis(tetraphenylborate), [Cu₂Cl₂(C₁₅H₁₇N₃)₂][(C₆H₅)₄B]₂, (5). Systematic variation of the anion from a coordinating chloride to a noncoordinating perchlorate for two Cu^I complexes results in either a discrete molecular species, as in (1), or a one‐dimensional chain structure, as in (2). In complex (1), there are two crystallographically independent molecules in the asymmetric unit. Complex (2) consists of the Cu^I atom coordinated by the amine and pyridyl N atoms of one ligand and by the vinyl moiety of another unit related by the crystallographic screw axis, yielding a one‐dimensional chain parallel to the crystallographic b axis. Three complexes with Cu^II show that varying the anion composition from two chlorides, to a chloride and a perchlorate to a chloride and a tetraphenylborate results in discrete molecular species, as in (3) and (4), or a bridged bis‐μ‐chlorido complex, as in (5). Complex (3) shows two strongly bound Cl atoms, while complex (4) has one strongly bound Cl atom and a weaker coordination by one perchlorate O atom. The large noncoordinating tetraphenylborate anion in complex (5) results in the core‐bridged Cu₂Cl₂ moiety.     

1,3,2-Diazasilols based on 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene

Reduction of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene (1, dpp-bian) in the presence of SiCl₄ with two equivalents of potassium graphite (KC₈) in tetrahydrofuran leads to the formation of compound (dpp-bian)SiCl₂ (2), which was also synthesized by the exchange reaction of SiCl₄ with the magnesium complex (dpp-bian)Mg(THF)₃. An analog of compound 2, the bromo derivative (dpp-bian)SiBr₂ (3), was obtained by the reaction of SiBr4 with one equivalent of Na2(dpp-bian) (in situ from Na and dpp-bian) in toluene. The silylene (dpp-bian)Si (4) was synthesized by the reduction of a mixture of dpp-bian and SiCl₄ (1: 1) with four equivalents of potassium graphite in tetrahydrofuran. Treatment of compound 4 with diimine 1 gives the derivative (dpp-bian)₂Si (5). Compounds 2–5 were characterized by ¹H, ¹³C, and ²⁹Si NMR spectroscopy, as well as by elemental analysis, their molecular structure was established by X-ray diffraction studies.     

Kristallstrukturen und spektroskopische Eigenschaften von 2λ3‐Phospha‐1, 3‐dionaten und 1, 3‐Dionaten des Calciums ‐ ein Vergleich am Beispiel der 1, 3‐Diphenyl‐ und 1, 3‐Di(tert‐butyl)‐Derivate

Crystal Structures and Spectroscopic Properties of 2λ³‐Phospha‐1, 3‐dionates and 1, 3‐Dionates of Calcium ‐ Comparative Studies on the 1, 3‐Diphenyl and 1, 3‐Di(tert‐butyl) Derivatives A hydrogen‐metal exchange between dibenzoylphosphane and calcium carbide in tetrahydrofuran (THF) followed by addition of the ligand 1, 3, 5‐trimethyl‐1, 3, 5‐triazinane (TMTA) furnishes the binuclear complex bis[(tmta‐N, N′, N″)calcium bis(dibenzoylphosphanide)] ( 1a ) co‐crystallizing with benzene. Similarly, reaction of bis(2, 2‐dimethylpropionyl)phosphane with bis(thf‐O)calcium bis[bis(trimethylsilyl)amide] in 1, 2‐dimethoxyethane (DME) gives bis(dme‐O, O′)calcium bis[bis(2, 2‐dimethylpropionyl)phosphanide] ( 1b ) in high yield. The carbon analogues 1, 3‐diphenylpropane‐1, 3‐dione (dibenzoylmethane) or 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione (dipivaloylmethane) and bis(thf‐O)calcium bis[tris(trimethylsilylmethyl)zincate] in DME afford bis(dme‐O, O′)calcium bis(dibenzoylmethanide) ( 2a ) and the binuclear complex (μ‐dme‐O, O′)bis[(dme‐O, O′)calcium bis(dipivaloylmethanide)] ( 2b ), respectively. Dialkylzinc formed during the metalation reaction shows no reactivity towards the 1, 3‐dionates 2a and 2b . Finally, from the reaction of the unsymmetrically substituted ligand 2‐(methoxycarbonyl)cyclopentanone and bis(thf‐O)calcium bis[bis(trimethylsilyl)amide] in toluene, the trinuclear complex 3 is obtained, co‐crystallizing with THF. The β‐ketoester anion bridges solely via the cyclopentanone unit.     

Reactions of tBu2P–PLi–PtBu2 with [(Et3P)2MCl2] (M = Ni,Pd, Pt). Synthesis and Properties of [(1,2‐η‐tBu2P=P–PtBu2)M(PEt3)Cl] (M=Ni,Pd)

^tBu₂P–PLi–P^tBu₂·2THF reacts with [cis‐(Et₃P)₂MCl₂] (M = Ni, Pd) yielding [(1,2‐η‐^tBu₂P=P–P^tBu₂)Ni(PEt₃)Cl] and [(1,2‐η‐^tBu₂P=P–P^tBu2)Pd(PEt₃)Cl], respectively. ^tBu₂P– PLi–P^tBu₂ undergoes an oxidation process and the ^tBu₂P–P–P^tBu₂ ligand adopts in the products the structure of a side‐on bonded 1,1‐di‐tert‐butyl‐2‐(di‐tert‐butylphosphino)diphosphenium cation with a short P–P bond. Surprisingly, the reaction of ^tBu₂P–PLi–P^tBu₂·2THF with [cis‐(Et₃P)₂PtCl₂] does not yield [(1,2‐η‐^tBu₂P=P–P^tBu₂)Pt(PEt₃)Cl].     

[N,N′‐Bis(2,6‐diisopropylphenyl)acenaphthene‐1,2‐diimine‐1κ2N,N′]heptacarbonyl‐1κC,2κ3C,3κ3C‐di‐μ3‐tellurido‐triiiron(II)(2 Fe—Fe)

The sterically hindered title complex, [Fe₃Te₂(C₃₆H₄₀N₂)(CO)₇], was obtained by substitution of two carbonyl groups in the [Fe₃(μ₃‐Te)₂(CO)₉] cluster by the bulky redox‐active N,N′‐bis(2,6‐diisopropylphenyl)acenaphthene‐1,2‐diimine (dpp‐BIAN) ligand. The asymmetric unit contains two molecules of the same geometry. The C=N bond lengths in dpp‐BIAN indicate a rather low level of electron transfer from the cluster core to the dpp‐BIAN ligand.     

Protonation of magnesium and sodium complexes containing dianionic diimine ligands. Molecular structures of 1,2-bis{(2,6-diisopropylphenyl)imino}acenaphthene (dpp-BIAN), [(dph-BIAN)H<Subscript>2</Subscript>(Et<Subscript>2</Subscript>O)], and [(dpp-BIAN)HNa(Et<Subscript>2</Subscript>O)]

Hydrolysis of magnesium complexes containing the dianionic acenaphthenediimine ligands, (dpp-BIAN)Mg(thf)₃ (1), (dph-BIAN)Mg(thf)₃ (2), and (dtb-BIAN)Mg(thf)₂ (3) (dpp-BIAN is 1,2-bis{ (2,6-diisopropylphenyl)imino}acenaphthene; dph-BIAN is 1,2-bis{(2-diphenyl)imino}acenaphthene; dtb-BIAN is 1,2-bis{(2,5-di-tert-butylphenyl)imino}acenaphthene), affords the corresponding diamines (dpp-BIAN)H₂ (4), (dph-BIAN)H₂(Et₂O) (5), and (dtb-BIAN)H₂ (6). Compounds 4 and 5 were isolated in the crystalline state and characterized by UV-Vis, IR, and ¹H NMR spectroscopy. Partial hydrolysis of (dpp-BIAN)Na₂(Et₂O)₃ gave the crystalline (dpp-BIAN)HNa(Et₂O)₂ complex (7), which was also characterized by spectroscopic methods. The structures of compounds 5 and 7 and free diimine dpp-BIAN were established by X-ray diffraction analysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2634–2640, December, 2004.     

Conformational change induced by hydration: trans‐dichloro­bis­[(1R,2R,3R,5S)‐(–)‐isopinocampheylamine]palladium(II) and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐isopinocampheylamine]palladium(II) hemihydrate

The title compounds, trans‐dichloro­bis[(1R,2R,3R,5S)‐(−)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II), [PdCl₂(C₁₀H₁₉N)₂], and trans‐dichloro­bis[(1S,2S,3S,5R)‐(+)‐2,6,6‐trimethyl­bicyclo­[3.1.1]heptan‐3‐amine]palladium(II) hemihydrate, [PdCl₂(C₁₀H₁₉N)₂]·0.5H₂O, present different arrangements of the amine ligands coordinated to Pd^II, viz. antiperiplanar in the former case and (−)anticlinal in the latter. The hemihydrate is an inclusion compound, with a Pd coordination complex and disordered water mol­ecules residing on crystallographic twofold axes. The crystal structure for the hemihydrate includes a short Pd⋯Pd separation of 3.4133 (13) Å.     

Activation of Molecular Hydrogen by Bis(η5,η1‐pentafulvene)‐titanium Complexes – Efficient Formation of Titanium(III)hydrides

The synthesis and crystal structures of two dinuclear titanocene hydride complexes are reported. Both complexes, namely bis(η⁵‐(di‐para‐tolylmethyl)cyclopentadienyl)titanium hydride dimer, [(η⁵‐C₂₀H₁₉)₂Ti(μ‐H)]₂ ( 2a ), and bis(η⁵‐2‐adamantylcyclopentadienyl)‐titanium hydride dimer, [(η⁵‐C₁₅H₁₉)₂Ti(μ‐H)]₂ ( 2b ), are formed via activation of molecular hydrogen by the corresponding bis(η⁵,η¹‐pentafulvene)titanium complexes 1a and 1b at ambient temperatures and pressures in high yields. The hydride complexes 2a and 2b exhibit planar [Ti₂H₂] cores and, as a result of the heterolytic cleavage of molecular hydrogen, substituted Cp Ligands were formed during the reaction.     

Reactions of (dpp-BIAN)Mg(thf)<Subscript>3</Subscript> complex (dpp-BIAN is 1,2-bis{(2,6-diisopropylphenyl)imino}acenaphthene) with halogen-containing reagents

The reactions of the acenaphthenediimine complex (dpp-BIAN)Mg(thf)₃ (1) (dpp-BIAN is 1,2-bis{ (2,6-diisopropylphenyl)imino}acenaphthene) with various chlorine-, bromine-, and iodine-containing reagents afforded the unsymmetrical compounds [(dpp-BIAN)MgCl(thf)]₂ (6), [(dpp-BIAN)MgBr(thf)]₂ (7), and (dpp-BIAN)MgI(DME) (8). The reaction of complex 1 with Me₃SiCl in THF is accompanied by the cleavage of the THF molecule to form [{dpp-BIAN(CH₂)₄OSiMe₃}MgCl]₂ (9), in which the trimethylsilanyloxybutyl group is bound to one of the carbon atoms of the diimine fragment. The reaction of complex 1 with Me₂NCH₂CH₂Cl in THF produces the [dpp-BIAN(H)(CH₂)₂NMe₂] compound (10) containing no magnesium. Paramagnetic complexes 6–8 were characterized by ESR spectroscopy. Diamagnetic compounds 9 and 10 were studied by ¹H and ¹³C NMR spectroscopy. The molecular structures of complexes 6–10 were established by X-ray diffraction analysis. In the crystalline state, compounds 6, 7, and 9 exist as halogen-bridged dimers. In all magnesium derivatives, BIAN serves as a chelate ligand.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2641–2651, December, 2004.