Determination of major and trace elements in human scalp hair by pressurized-liquid extraction with acetic acid and inductively coupled plasma–optical-emission spectrometry

An analytical method has been developed for determination of major (Ca, K, Mg, and Na) and trace elements (As, Cd, Co, Li, Ni, and Sr) in human scalp hair. The proposed method includes a novel, simple, rapid, highly efficient, and automated metal-leaching procedure, by pressurized-liquid extraction (PLE), combined with a rapid simultaneous detection system—inductively coupled plasma–optical-emission spectrometry (ICP–OES). PLE is one of the most promising recently introduced sample-preparation techniques, with the advantages of reducing solvent consumption and enabling automated sample handling. The operating conditions for PLE, including concentration of the extraction solvent, extraction temperature, static time, number of extraction steps, pressure, mean particle size, diatomaceous earth (DE) mass/sample mass ratio, and flush volume were studied using an experimental design (Plackett–Burman design, PBD). The optimum conditions were use of 0.75 mol L⁻¹ acetic acid as extracting solution and powdered hair samples thoroughly mixed with DE, as a dispersing agent, at a DE mass/sample mass ratio of 4. Extraction was performed at room temperature and an extraction pressure of 140 atm for 5 min in one extraction step. The flush volume was fixed at 60%. The PLE-assisted multi-element leaching proposed is complete after 7 min (5 min static time plus 1 min purge time plus 1 min end relief time). Under the optimised conditions the figures of merit, for example limits of detection and quantification, repeatability of the over-all procedure, and accuracy, were evaluated. Analysis of GBW-07601 (human hair) certified reference material revealed accuracy was good for the target elements. The optimised method was finally applied to several human scalp-hair samples.     

Supercritical fluid extraction of polychlorinated biphenyls and pesticides from soil. Comparison with other extraction methods.

A comparison is made of supercritical fluid extraction (SFE) with two other techniques widely used for the extraction of polychlorinated biphenyls (PCBs) and organochlorine pesticides in soil. Extraction conditions for the SFE of PCBs and pesticides were first determined. An experimental approach was set up to determine the influence of different extraction parameters such as pressure, extraction time, static and dynamic extraction, restrictor type and collection solvent for off-line SFE. The use of carbon dioxide at 50 degrees C and 20 MPa, 10 min static followed by 20 min dynamic extraction with collection in iso-octane were been found to be the optimum conditions. Two types of soil, with a low and high content of organic carbon, respectively, spiked with 16 PCBs and organochlorine pesticides with a wide range of volatility and polarity at a level of 5 ng/g dry matter, were used as test materials. Conventional solvent extraction gives a good extraction yield for soil with a low content of organic carbon, but for peat soil the recoveries decrease dramatically to 30% for DDE, DDT and PCB 138 and 153. The recoveries with Soxhlet extraction are good, but an extra clean-up step before analysis is necessary. SFE gives good extraction yields for PCBs and organochlorine pesticides, varying between 85 and 105% with a reproducibility of 5% for each component for both types of soil. SFE is a fast, clean and reproducible method for the extraction of PCBs and organochlorine pesticides from these two soil matrices.     

Optimisation of Pressurized Liquid Extraction for the Determination of Seven Selected Polychlorinated Biphenyls in Feed Samples

Pressurized Liquid Extraction was utilized for the extraction of seven selected polychlorinated biphenyls (28, 52, 101, 118, 153, and 180) from a naturally contaminated fishmeal and two feed samples fortified with a naturally contaminated fish oil sample. In order to assure sufficient extraction efficiencies, the extraction solvent, the extraction temperature, and the flush volume were optimised by a factorial design approach. The results of the analyses revealed that the impact of these parameters on the extraction of PCBs differed depending on which matrix that was analysed. For fishmeal, an elevated extraction temperature was important to obtain the highest values for the recovery rates whereas for the feed samples high extraction efficiencies could be obtained for all temperatures investigated in the study. In addition, the solvent had an impact on the extraction of PCBs, however, the influence was less pronounced than the impact of temperature. The final conditions, resulting in high recovery rates for all PCBs in all matrices, were found to be temperatures above 100°C using n-heptane as extraction solvent, while the flush volume had very limited effects on the extraction efficiency.     

Desorption of BTEX from activated charcoal using accelerated solvent extraction: evaluation of occupational exposures

A procedure for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene (BTEX) in occupational environments is proposed. These compounds are extracted from activated charcoal using accelerated solvent extraction. Operational parameters are optimized and quantitative recovery is obtained using acetonitrile as the extraction solvent and 1-mL extraction cells, a preheat time of 2 min, a temperature of 160 °C, a pressure of 1,500 psi, a static period of 5 min, a flush volume of 110%, two cycles and a purge time of 90 s. Determination of BTEX compounds is carried out by gas chromatography using a flame ionization detector. The recoveries, obtained for a confidence level of 95%, are 91 ± 4, 100 ± 3, 104 ± 2, 93 ± 4, 99 ± 2 and 99 ± 2% for benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene, respectively. The detection limits are 0.5 μg for benzene, 0.7 μg for toluene and 1.0 μg for the other compounds. The proposed procedure has been applied to real samples collected in several workplaces, like a microbiology laboratory, an analytical chemistry laboratory, a printer’s, a car repair shop and a petrol station. From the results obtained, it can be concluded that the occupational exposures determined are always acceptable because they are lower than the tenth part of the recommended exposure limits (VLA-ED and VLA-EC).     

Modified superheated water extraction of pesticides from spiked sediment and soil

In this study a laboratory-made superheated water system was applied in order to extract some pesticides from sand, sediment and soil samples. Extraction efficiencies were investigated at different time intervals with regard to temperature, type and amount of organic modifier. Pesticides were removed from the aqueous extract using dichloromethane as a trapping solvent. The optimal extraction temperature from sand specimens for malathion, heptachlor, aldrin, dieldrin, butachlor, metalaxyl and propiconazole was found to be 160 °C, while those for chlordane and thiobencarb were 120 °C and 180 °C, respectively. The static extraction time for heptachlor, aldrin, dieldrin, butachlor and metalaxyl was found to be 15 min, whereas for malathion and thiobencarb it was 5 min, and for chlordane and propiconazole it was 10 and 20 min, respectively. Recoveries for the extractions of the pesticides from sand under optimized extraction conditions ranged between 96 and 101%. Those obtained from sediment under such conditions were unsatisfactory, and were consequently improved by adding an organic modifier to the superheated water, and sodium chloride to the extract during liquid-liquid extraction. These procedures were optimized further for the parameters described and recoveries exceeded 91%, with the exception of butachlor. The extraction technique was also applied to soil samples at a reduced water flow rate of 0.5 mL min⁻¹, yielding recoveries of 82–105%, and 76% for dieldrin. The reproducibilities, expressed as relative standard deviations (RSDs), ranged between 2 and 13%.     

A liquid–liquid extraction technique for phthalate esters with water-soluble organic solvents by adding inorganic salts

In the presence of inorganic salts, the mixture solution of some water-soluble organic solvents and water can form two clearly separated phases. One is the organic solvent rich phase, the other is the water rich phase. In the phase separation process, hydrophobic solutes dissolved in the mixture solution such as phthalate esters can be extracted into the organic solvent rich phase quantitatively. Based on this phase separation phenomenon, a liquid–liquid extraction technique of phthalate esters using water-soluble organic solvents as organic phases was developed. Several important parameters affecting the extraction efficiency including the kind and the amount of water-soluble organic solvents, the kind and the amount of inorganic salts and the pH of the sample solutions were carefully studied. This new extraction technique has been applied to the HPLC analysis for water lixivium of plastic wrapping film. Under the optimized conditions, detection limits of 1.5, 2.3, 1.0, 2.6, 1.3 and 3.0 ng mL⁻¹ were obtained for diethylphthalate, di-n-propylphthalate, di-iso-butylphthalate, dicyclohexylphthalate, di-n-octylphthalate and di-n-nonylphthalate ester respectively. The strongpoints of this new liquid–liquid extraction technique are the easy phase separation, rapid partition equilibrium, less toxicity and very good compatibility with subsequent HPLC determinations.     

Evaluation of extraction approaches linked to ELISA and HPLC for analyses of microcystin-LR, -RR and -YR in freshwater sediments with different organic material contents

The efficiencies of conventional extraction techniques and analytical methods (HPLC–DAD and ELISA) were investigated for analyses of microcystins (MCs) in sediments. Our results showed several limitations. First, the extraction efficiency strongly depends on the extraction solvent, and extraction with 5% acetic acid in 0.2% trifluoroacetic acid (TFA)–methanol was confirmed as being the most appropriate for three different sediments (recovery: 33.1–44.9% of total MCs according to HPLC analyses). Second, the recovery of MCs was affected by the type of sediment but did not clearly correlate with the content of organic carbon. These results suggest that the sorption of MCs onto inorganic materials such as clay minerals is probably a more important process than interactions of the MCs with organic sediment matter. Third, the structure of the MCs is another crucial factor that affects the sorption of MCs and their recovery from sediments. Hydrophilic MC-RR gave much lower recoveries (20.0–38.8%) than MC-YR (44.1–59.5%) or MC-LR (55.3–77.8%) from three different types of spiked sediments. Recovery results analysed with HPLC–DAD correlated well with ELISA analyses. Further, extraction with 5% acetic acid in 0.2% TFA–methanol was used for analyses of MCs in 34 natural sediment samples collected from Brno reservoir (Czech Republic) from April to October 2005. Concentrations of MCs in sediments ranged from 0.003 to 0.380 μg/g sediment d.m. (ELISA results) or 0.016–0.474 μg/g d.m. (HPLC results). These values are equivalent to 0.63–96.47 μg/L of sediment (ELISA) or 4.67–108.68 μg/L (HPLC), respectively. Concentrations of sediment MCs showed both temporal and spatial variability, with the highest MC contents observed in the spring (April and May) and the lowest concentrations in July and August. Our results demonstrate the suitability of the methods described here for studying the occurrence, fate and ecological role of MCs in the aquatic environment.      

Reactivity features of polychlorobiphenyl congeners in the nucleophilic substitution reactions

Groups of congeners and individual congeners of polychlorobiphenyls contributing to the composition of the technical mixture “Sovol” (PCB 60, PCB 64, PCB 70, PCB 74, PCB 97, PCB 101, PCB 105, PCB 110, PCB 118, PCB 138, PCB 149, PCB 156, and PCB 163) were synthesized by the reaction of aryl-aryl coupling. The interaction of the congeners with sodium methoxide was performed and their complete conversion was proved. By means of gas chromatography-mass spectrometry the PCBs methoxy derivatives were identified. The data on the reactivity of the individual polychlorobiphenyl congeners were precised.     

Optimised accelerated solvent extraction of PCBs and PAHs from compost

This study is the first thorough method optimisation for accelerated solvent extraction (ASE) of polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) from chemically dried compost. For PCBs, optimised solvent composition, temperature, pressure, number of static cycles, duration, and flush volume were as follows: toluene/acetone 1?:?3 (v/v), 120°C, 2000?psi, 3?×?5?min, and 50%, respectively. Limits of quantification and method precision were between 0.16 and 2.46?µg?kg^?1 dw and 6–17% respectively for individual PCBs. Absolute recoveries of isotope-labelled extraction standards used for each of the analytes ranged from 65 to 105% and relative recoveries were between 85 and 99%. The method proofed to be robust and was successfully applied to different compost samples.

The optimisation of PAHs extraction was performed and resulted in the following conditions: solvent: hexane/acetone 1/3 (v:v), temperature: 140°C, pressure: 1500?psi, extraction time: 3?×?5?min, and 50% flush volume. Limits of detection and method precision for individual PAHs were between 1.1 and 37.2?µg?kg^?1?dw and 12–34% respectively. Absolute and relative recoveries ranged from 24 to 68% and from 85 to 99%, respectively. Optimal extraction conditions for PAHs were more difficult to determine due to the inhomogeneous distribution of PAHs in samples. However, the method appeared to be feasible and suggestions for further improvements are presented.     

Application of Internal Standard for Micro Extraction– Spectrophotometric Determination of Bismuth in Pharmaceutical Formulations

 A micro extraction – spectrophotometric procedure is developed for the determination of bismuth in pharmaceutical formulations. The procedure is based on the extraction of tetraiodobismuthate(III) ion paired with benzyltributylammonium cation into chloroform. The application of Nile Blue as internal standard (IS) enabled good analytical performance for micro-scale analysis. The ratio between the absorbances measured at 491 nm (bismuth complex) and at 632 nm (IS) was taken as the analytical signal. The procedure was carried out in Eppendorf tubes, lowering significantly the use of reagents and the volume of organic solvent. In the calibration range up to 60 mgċl⁻¹, the linear regression coefficient was 0.9999, the CV for 15 mgċl⁻¹ and for 50 mgċl⁻¹ Bi were 1.6% and 0.7% respectively. The results obtained in the analysis of pharmaceutical formulations were in good agreement with the results of EDTA titration method. Received November 25, 1999. Revision February 14, 2000.     

Simultaneous extraction of several persistent organic pollutants in sediment using focused ultrasonic solid-liquid extraction

Focused ultrasonic solid-liquid extraction (FUSLE) has been optimised for simultaneous analysis of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalate esters (PEs), and nonylphenols (NPs) in sediment samples. Optimisation was performed using naturally polluted freeze-dried sediment samples. The variables studied during the optimisation process were: percentage of maximum power (10-60%), extraction time (10-300 s), number of cycles (1-9), composition of the extraction solvent (acetone-n-hexane, 10:90-90:10), and sample mass (0.1-1 g). The volume of the extractant was constant (10 mL) and the extraction was performed at 0 degrees C in an ice-bath during the optimisation process. All these variables were studied using an experimental design approach by means of The Unscrambler software. The extraction time and the operational variables (number of cycles and power) had no statistically significant effect in the extraction and they were held at 2 min, 20% power, and seven cycles, respectively. The mass and the addition of non-polar solvent (n-hexane) had a negative effect in the extraction yield and, thus, the mass was held at 0.5 g and pure acetone was used as extraction solvent. After those variables were optimised, the effect of the extraction temperature (0 degrees C or room temperature) was also studied. The validation of the extraction method was performed using NIST-1944 reference material in the case of PAHs and PCBs. Because no certified reference sediment is available for PEs and NPs, the results obtained for FUSLE were compared with those obtained for microwave-assisted extraction (MAE) under conditions optimised elsewhere. In all the cases the analysis were performed by gas chromatography-mass spectrometry (GC-MS). Good accuracy were achieved in all cases. The limits of detection (LODs) obtained were between 0.10 and 1.70 ng g(-1) for PAHs (except for naphthalene 5.33 ng g(-1)), 0.02 and 0.16 ng g(-1) for PCBs, 46 and 188 ng g(-1) for PEs, and 0.6 and 12.4 microg g(-1) for NPs. The precision was around 5-10% for most of the PAHs and PCBs and around 2-10% for most of the PEs and NPs.     

Self-consistent reaction field calculation of solvent reorganization energy in electron transfer: a dipole-reaction field interaction model

Based on the continuum dielectric model, this work has established the relationship between the solvent reorganization energy of electron transfer (ET) and the equilibrium solvation free energy. The dipole-reaction field interaction model has been proposed to describe the electrostatic solute-solvent interaction. The self-consistent reaction field (SCRF) approach has been applied to the calculation of the solvent reorganization energy in self-exchange reactions. A series of redox couples, O₂/O⁻ ₂, NO/NO⁺, O₃/O⁻ ₃, N₃/N⁻ ₃, NO₂/NO⁺ ₂, CO₂/CO⁻ ₂, SO₂/SO⁻ ₂, and ClO₂/ClO⁻ ₂, as well as (CH₂)₂C-(-CH₂-) _n -C(CH₂)₂ (n=1 ∼ 3) model systems have been investigated using ab initio calculation. For these ET systems, solvent reorganization energies have been estimated. Comparisons between our single-sphere approximation and the Marcus two-sphere model have also been made. For the inner reorganization energies of inorganic redox couples, errors are found not larger than 15% when comparing our SCRF results with those obtained from the experimental estimation. While for the (CH₂)₂C–(–CH₂–) _n –C(CH₂)₂ (n=1 ∼ 3) systems, the results reveal that the solvent reorganization energy strongly depends on the bridge length due to the variation of the dipole moment of the ionic solute, and that solvent reorganization energies for different systems lead to slightly different two-sphere radii. Received: 19 April 2000 / Accepted: 6 July 2000 / Published online: 27 September 2000     

Sediment certified reference materials for the determination of polychlorinated biphenyls and organochlorine pesticides from the National Metrology Institute of Japan (NMIJ)

Two marine sediment certified reference materials, NMIJ CRM 7304-a and 7305-a, have been issued by the National Metrology Institute of Japan in the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST) for the determination of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). The raw materials of the CRMs were collected from a bay near industrial activity in Japan. Characterization of these CRMs was conducted by NMIJ, where the sediments were analyzed using multiple analytical methods such as pressurized liquid extraction (PLE), microwave-assisted extraction (MAE), saponification, Soxhlet extraction, supercritical fluid extraction (SFE), and ultrasonic extraction; the target compounds were determined by one of the primary methods of measurements, isotope dilution–mass spectrometry (ID-MS). Certified values have been provided for 14 PCB congeners (PCB numbers 3, 15, 28, 31, 70, 101, 105, 138, 153, 170, 180, 194, 206, 209) and 4 OCPs (γ-HCH, 4,4′-DDT, 4,4′-DDE, 4,4′-DDD) in both CRMs. NMIJ CRM 7304-a has concentrations of the contaminants that are a factor of 2–15 greater than in CRM 7305-a. Both CRMs have information values for PCB homolog concentrations determined by collaborative analysis using a Japanese official method for determination of PCBs. The total PCB concentrations in the CRMs are approximately 920 and 86 μg kg⁻¹ dry mass respectively. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Supercritical fluid extraction of t-resveratrol and other phenolics from a spiked solid

Supercritical fluid extraction of spiked phenolics including gallic acid, (+)-catechin, (–)-epicatechin, caffeic acid, p-coumaric acid, myricetin, t-resveratrol, quercetin and salicylic acid from an inert support using pure CO₂ and methanol-carbon dioxide mixtures was studied. Extraction and collection variables including modifier percentage, extraction temperature, flow rate, extraction time, trap packing and rinse solvent were optimized. The study revealed that the use of methanol as modifier was mandatory. Only the less hydroxylated compounds such as p-coumaric acid, t-resveratrol and salicylic acid could be quantitatively recovered (mean recovery ≥ 95%) from spiked diatomaceous earth. Mean recoveries of more polar phenolic acids and flavonoids such as gallic acid, caffeic acid, catechins and quercetin were between 30% and 70%. Myricetin was not recovered at all. Received: 19 June 1997 / Revised: 20 October 1997 / Accepted: 26 October 1997     

Dipole–reaction field interaction model for the solvent reorganization energy and its application to the benzoquinone–benzoquinone anion radical system

 Based on the spherical cavity approximation and the Onsager model, a dipole–reaction field interaction model has been proposed to elucidate the solvent reorganization energy of electron transfer (ET). This treatment only needs the cavity radius and the solute dipole moment in the evaluation of the solvent reorganization energy, and fits spherelike systems well. As an application, the ET reaction between p-benzoquinone and its anion radical has been investigated. The inner reorganization energy has been calculated at the level of MP2/6–31+G, and the solvent reorganization energies of different conformations have been evaluated by using the self-consistent reaction field approach at the HF/6–31+G level. Discussions have been made on the cavity radii and the values are found to be reasonable when compared with the experimental ones of some analogous intramolecular ET reactions. The ET matrix element has been determined on the basis of the two-state model. The fact that the value of the ET matrix element is about 10 times larger than RT indicates that this ET reaction can be treated as an adiabatic one. By invoking the classical Marcus ET model, a value of 4.9 × 10⁷M⁻¹s⁻¹ was obtained for the second-order rate constant, and it agrees quite well with the experimental one. Received: 19 October 2001 / Accepted: 17 January 2002 / Published online: 3 May 2002     

Determination of tributyltin (TBT) in marine sediment using pressurised liquid extraction–gas chromatography–isotope dilution mass spectrometry (PLE–GC–IDMS) with a hexane–tropolone mixture

Extraction conditions for the determination of tributyltin (TBT) in sediment samples have been developed further. The analytical procedure is based on spiking with isotopically labelled analyte, pressurised liquid extraction (PLE) with a hexane/tropolone mixture, Grignard derivatization and quantification by GC–MS. It was applied to two unknown sediment samples as part of an intercomparison exercise of the Comité Consultatif pour la Quantité de Matière (CCQM). The detection limit was approximately 1.5 ng/g TBT as Sn, while the repeatability and intermediate precision (as the coefficient of variation) were 1.9% and 3.2%, respectively. The expanded uncertainty was 6.2% (coverage factor k = 2), and the accuracy was confirmed by measurement of a certified reference material.     

Matrix solid phase dispersion–Soxhlet simultaneous extraction clean-up for determination of organochlorine pesticide residues in tobacco

A novel method combining matrix solid phase dispersion (MSPD) with Soxhlet simultaneous extraction clean-up (SSEC) was developed. Being a single-step extraction and clean-up procedure, it could be used instead of multistep solvent extraction and Florisol column clean-up. It not only reduces sample contamination during the procedure, but it also decreases the amount of organic solvent needed. The retention times of standards were used to qualitatively assess the method, and the external standard method was used to quantitatively assess it. Residues of organochlorine pesticides (OCP) in tobaccos were determined by gas chromatography–electron capture detection (GC–ECD), and their identities were confirmed by the standard addition method (SAM). The performance of the method was evaluated and validated: the detection limit was 0.01–0.02 μg g⁻¹, relative standard deviations were 5–26%, and recoveries were 72–99% at fortification levels of 0.10, 1.00 and 10.0 μg g⁻¹. The analytical characteristics of MSPD–SSEC compared very favorably with the results from the classical multistep solvent extraction and Florisol column clean-up method.     

Supercritical fluid extraction of t-resveratrol and other phenolics from a spiked solid

Supercritical fluid extraction of spiked phenolics including gallic acid, (+)-catechin, (–)-epicatechin, caffeic acid, p-coumaric acid, myricetin, t-resveratrol, quercetin and salicylic acid from an inert support using pure CO₂ and methanol-carbon dioxide mixtures was studied. Extraction and collection variables including modifier percentage, extraction temperature, flow rate, extraction time, trap packing and rinse solvent were optimized. The study revealed that the use of methanol as modifier was mandatory. Only the less hydroxylated compounds such as p-coumaric acid, t-resveratrol and salicylic acid could be quantitatively recovered (mean recovery ≥ 95%) from spiked diatomaceous earth. Mean recoveries of more polar phenolic acids and flavonoids such as gallic acid, caffeic acid, catechins and quercetin were between 30% and 70%. Myricetin was not recovered at all. Received: 19 June 1997 / Revised: 20 October 1997 / Accepted: 26 October 1997     

A simplified hollow-fibre supported liquid membrane extraction method for quantification of 2-amino-1-methyl-6-phenylimidazo[4,5-<Emphasis Type="BoldItalic">b</Emphasis>]pyridine (PhIP) in urine and plasma samples

A simple and easy-to-use extraction procedure has been optimised, validated, and applied for extraction of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP) in urine and spiked plasma samples. PhIP is a carcinogenic and mutagenic heterocyclic aromatic amine that is formed during cooking of meat and fish. The novelty of the extraction procedure lies in using a short piece of narrow capillary-like microporous hollow-fibre (HF) membrane as extraction device. The HF membrane was filled with a few microlitres of acidic solution and the membrane pores were impregnated with an organic extraction solvent. Therefore, the technique was called hollow-fibre supported liquid membrane (HF-SLM) extraction. The HF extraction device was then supported by a syringe needle and directly immersed in urine (1.4 mL) or plasma (0.3 mL) previously made alkaline by adding 0.5 mol L⁻¹ NaOH solution to give a final volume of 1.6 mL. The operation of the HF-SLM extraction at the optimal conditions resulted in a PhIP extraction efficiency of 74% from both spiked urine and plasma, corresponding to enrichment factors of 126 and 27, respectively. For 90 min extraction time, limits of detection and quantification were, respectively, 8 and 25 pg mL⁻¹ for urine and 6 and 11 pg mL⁻¹ for plasma. Within-day repeatability (n = 6) and between-day reproducibility (n = 3) were, respectively, 5% and 13% for urine and 6% and 7% for plasma. Analysis of urine samples collected for 12 h after a volunteer had eaten 250 g well-done chicken showed the PhIP concentration was 124 ± 21 pg mL⁻¹, calculated assuming an extraction efficiency of 74%.     

Combination of micellar extraction and GC-ECD for the determination of polychlorinated biphenyls (PCBs) in water

 The application of the solvent-free micellar extraction as an alternative method to the liquid–liquid extraction for the enrichment of polychlorinated biphenyls (PCBs) from ultrapure and natural water is presented. A nonionic surfactant was used to preconcentrate the PCBs. After a clean-up consisting of two columns (silica gel and Florisil) the analytes were identified and quantified by GC-ECD. Recoveries for spiked water were up to 100%. For highly contaminated seepage water of landfills liquid–liquid extraction is involving great problems with the phase separation of water and solvent. According to our results, the micellar extraction is superior to the liquid–liquid extraction for this difficult kind of aqueous matrix. Received: 20 February 1996/Revised: 20 May 1996/Accepted: 30 May 1996