Optical Waveguide Formed in RbTiOPO4 Crystal by 6.0 MeV O^3＋ Implantation

A planar optical waveguide was formed in RbTiOP04 crystal by 6.0-MeV oxygen ion implantation with the dose of 2 × 10^15 ions/cm2 at room temperature. Annealing at 200℃ for 30min in air is performed to improve the thermal stability of the waveguide. The dark modes of the waveguide are measured at wavelengths 633 and 1539 nm, respectively. The refractive index profiles in the guiding layer are reconstructed by using the reflectivity calculation method. TRIM＇98 code was carried out to simulate the damage profiles caused by the implantation process to obtain a better understanding of the waveguide formation.     

Fabrication of surface relief gratings on transparent dielectric materials by two-beam holographic method using infrared femtosecond laser pulses

Fabrication of surface relief-type gratings in transparent dielectrics, which are hard to machine, has been achieved by a holographic technique using two infrared femtosecond (fs) pulses from a mode-locked Ti:sapphire laser. The present method can be applied for a variety of transparent dielectrics, Al₂O₃ (sapphire), TiO₂, ZrO₂, LiNbO₃, SiC, ZnO, CdF₂, MgO, CaF₂ crystals, and SiO₂ glass. It is found that the grating formation is due primarily to laser ablation processes. Planar surface relief gratings can be fabricated by colliding two fs laser pulses on the surface of substrates which move at a constant speed, synchronized with the laser repetition rate. Received: 1 March 2000 / Published online: 7 June 2000     

Photorefraction in LiNbO<Subscript>3</Subscript>:Fe crystals with femtosecond pulses at 532 nm

Photorefractive index gratings are written into iron-doped lithium niobate crystals using femtosecond laser pulses and cw light, both having a wavelength of 532 nm. The saturation value of the refractive index changes in as-grown samples is found to decrease with increasing peak pulse intensity. Furthermore, in oxidized crystals, writing with femtosecond pulses is much faster than with cw light and retains about the same writing speed than in as-grown crystals. We propose a charge transport model that addresses the special case of recording with high intensity femtosecond pulses.     

Flexible gratings fabricated in polymeric plate using femtosecond laser irradiation

Flexible gratings embedded in poly-dimethlysiloxane (PDMS) were fabricated using femtosecond laser pulses. Photo-induced gratings in a flexible PDMS plate were directly written by a high-intensity femtosecond (130 fs) Ti: Sapphire laser (λ_p=800 nm). Refractive index modifications with 4 μm diameters were photo-induced after irradiation of the femtosecond pulses with peak intensities of more than 1×10¹¹ W/cm². The graded refractive index profile was fabricated to be symmetric around the center of the focal point. The diffraction efficiency of the grating samples is measured by an He-Ne laser. The maximum value of refractive index change (Δn) in the laser-modified regions was estimated to be approximately 3.17×10⁻³.     

Rapid fabrication of optical volume gratings in Foturan glass by femtosecond laser micromachining

We report on rapid fabrication of optical volume gratings in Foturan glass using a modulated femtosecond laser focused with cylindrical lenses. An optical volume grating with an area of 2 mm ×3 mm and ∼2 mm thickness can be achieved within 10 min by use of this method. Optical micrography confirms the volume nature of the gratings and shows that they consist of 10 μm-thickness planes with a period of 15 μm. The diffraction efficiency is examined to be ∼56%. The limitations and future implementations of the fabricated volume gratings are discussed.     

Transverse Writing of Multimode Interference Waveguides inside Silica Glass by Femtosecond Laser Pulses

Multi-mode interference waveguides are fabricated inside silica glass by transverse writing geometry with femtosecond laser pulses. The influences of several writing and reading factors on the output mode are systematically studied. The experimental results of straight waveguides are in good agreement with the simulations by the beam propagation method. By integrating a straight waveguide with a bent waveguide, a 1× 2 multi-mode splitter is formed and 2×3 lobes are observed in the output mode.     

Sub-wavelength surface structuring of NiTi alloy by femtosecond laser pulses

Generation of self-organized sub-wavelength surface structures on a nickel–titanium alloy plate by femtosecond laser pulses is investigated experimentally through line-scribing experiments in air. It is found that Bragg-like relief gratings, with the orientation perpendicular to the laser polarization, are formed over the entire laser-scribed regions. The average period is measured as 630±30 nm. Distinctive features of these novel surface structures include nanoparticle-covered grating ridges and the maintainable spatial period regardless of incidence angles. With different laser parameters and sample scan speeds, sub-wavelength grating structures can evolve into cellular-like nanotextures. Optimal conditions for forming these surface structures are determined in terms of laser energy and scan speed. Elementary analyses of the structured surfaces by X-ray diffraction and photoelectron spectroscopy reveal that both the crystal structures and the chemical elements can remain in their original states, but the surface grains are refined and the atomic percentages are varied after femtosecond laser treatments.     

Melting behaviours of nickel nanorods

We report the synthesis and measurement of an ultra-precise and extremely stable optical frequency in the telecommunications window around 1543 nm. Using a fibre-based femtosecond frequency comb we have phase-stabilised a fibre laser at 194 THz to an optical frequency standard at 344 THz, thus transferring the properties of the optical frequency standard to another spectral region. Relative to the optical frequency standard, the synthesised frequency at 194 THz is determined to within 1 mHz and its fractional frequency instability is measured to be less than 2×10^-15 at 1 s, reaching 5× 10^-18 after 8000 s. We also measured the synthesised frequency against a caesium fountain clock: here the frequency comparison itself contributes less than 4 mHz (2×10^-17) to the uncertainty. Our results confirm the suitability of fibre based frequency comb technology for precision measurements and frequency synthesis, and enable long-distance comparison of optical clocks by using optical fibres to transmit the frequency information.     

Absorption and second harmonic emission from interaction of femtosecond laser pulses with microspherical droplets

In this paper, the interaction of femtosecond laser pulses with droplets microplasma at the intensity of 10¹⁶ W/cm² is theoretically studied. Laser absorption, suprathermal electron generation, and second harmonic generation are discussed. Using an analytical model and a 2D particle-in-cell code, we find that the dominated mechanism is resonant absorption in the interaction of femtosecond laser pulses with droplets for the misrospherical geometry.     

Intense femtosecond laser-induced second-harmonic generation in atmospheric-pressure air

Second-harmonic generation (SHG) in atmospheric-pressure air is experimentally studied using single focused linear-polarized Ti:sapphire intense femtosecond laser pulses at 810 nm. The efficiency of SHG is found to reach a maximum at the optical breakdown threshold of ≈2.9×10¹⁴ W/cm². The spectral distribution and polarization property of the second harmonic are investigated. The contribution to SHG from electric-field-induced third-order mixing plays the main role even after the optical breakdown had occurred. Received: 23 May 2000 / Published online: 16 August 2000     

Fabrication of high-efficiency diffraction gratings in glass

We investigated a microfabrication process for optical gratings with periods of micrometer order that use ultrafast laser pulses in semiconductor-doped glass. ZnS- or PbS-doped SiO2-A12O3-B2O3-CaO-ZnO-Na2O-K2O glass was prepared by a melting method. Glass transmission diffraction gratings with a high refractive-index difference were fabricated with femtosecond laser pulses. The first-order diffraction efficiencies of these gratings were approximately 80%, and the first-order diffraction angles of these gratings were 8 degrees at telecommunication wavelengths.     

Visualization of the spatio-temporal structure of a pulsed photoelectron beam formed by femtosecond laser radiation

A method based on an original electron microscope created for investigating photoelectron beams is presented. It ensures a nanometer spatial resolution and picosecond time resolution. Electrons appearing when a metal needle is irradiated by femtosecond laser pulses are transmitted through a dielectric microcapillary and are subjected to a ponderomotive potential created by femtosecond laser radiation focused near the capillary tip. The position-sensitive detection scheme allows for the detection of the spatial profile of a photo-electron beam with a magnification of K ≅ 4 × 10⁴. The time structure of the photoelectron beam is visualized by scanning the delay time between laser pulses irradiating the needle and a laser pulse focused near the capillary tip.     

Nonlinear optical response of Ge nanocrystals in silica matrix with excitation of femtosecond pulses

We report an investigation of third-order optical nonlinearities in Ge nanocrystals (∼6 nm radius) embedded in silica matrix using the Z-scan and pump-probe techniques with femtosecond laser pulses at 780-nm wavelength. The nanocrystallite Ge samples were prepared using magnetron co-sputtering and post-thermal annealing at 800 °C. The nonlinear absorption coefficient and refractive index of the Ge nanocrystals were determined to be in the range from 1.8×10^-7 to 6.8×10^-7 cm/W and 1.5×10^-12 to 8.0×10^-12 cm²/W, respectively, which are proportional to the Ge atomic fraction in the matrix. Relaxation of the nonlinear response was found to have two characteristic time constants, 1.8 ps and 65 ps. The mechanisms responsible for the observed nonlinear response are discussed. Received: 21 August 2000 / Revised version: 17 January 2001 / Published online: 30 March 2001     

Talbot effect of a high-density grating under femtosecond laser illumination

The Talbot effect of a high-density grating under femtosecond laser illumination is analyzed with rigorous electromagnetic theory which is based on the Fourier decomposition and the rigorous coupled-wave analysis (RCWA). Numerical simulations show that the contrast of the Talbot images steadily decreases as the transmitted femtosecond laser pulses propagate forward and with wider spectrum width of the femtosecond laser pulses. The Talbot images of high-density gratings have much higher sensitivity of the spectrum widths of the incident laser pulses than those of the traditional low-density gratings. In experiments, the spectrums and the pulse widths of the incident pulses are measured with a frequency-resolved optical grating (FROG) apparatus. The Talbot images are detected by using a Talbot scanning near-field optical microscopy (Talbot-SNOM) technique, which are in coincidence with the numerical simulations. This effect should be useful for developing new femtosecond laser techniques and devices.     

Third harmonic generation by ultrashort laser pulses tightly focused in air

The influence of focusing conditions (numerical apertures from 0.004 to 0.06) on absolute energetic characteristics of third harmonic generation (THG) in air was experimentally studied for pumping 1R (744 nm wavelength) femtosecond laser pulses. THG was observed both for sub-critical and super-critical laser pulses in the linear and non-linear propagation modes, respectively. The maximum THG efficiency of 1.6 × 10⁻³ was obtained in our experiments at the tight focusing conditions and the sub-critical pulse powers.     

Fabrication of long-period fiber gratings by focused irradiation of infrared femtosecond laser pulses

We have fabricated long-period fiber gratings by use of a novel technique using focused irradiation of infrared femtosecond laser pulses. We investigate the thermal stability of the fabricated fiber gratings. The values of the loss peak wavelength and the transmittance of the fiber gratings after heat treatment below 500 degrees C are the same as initial values before heat treatment. The fiber gratings that were fabricated by this technique have a high resistance to thermal decay. We propose that this technique will be useful for fabrication of fiber gratings with a superior aging characteristic.     

Influence of ordering change on the optical and thermal properties of inflation polyethylene films

Changes of thermal diffusivity inside femtosecond laser-structured volumes as small as few percent were reliably determined (with standard deviation less than 1%) with miniaturized sensors. An increase of thermal diffusivity of a crystalline high-density polyethylene (HDPE) inflation films by 10-20% from the measured (1.16 ± 0.01) × 10⁻⁷ m² s⁻¹ value in regions not structured by femtosecond laser pulses is considerably larger than that of non-crystalline polymers, 0-3%. The origin of the change of thermal diffusivity are interplay between the laser induced disordering, voids’ formation, compaction, and changes in molecular orientation. It is shown that laser structuring can be used to modify thermal and optical properties. The birefringence and infrared spectroscopy with thermal imaging of CH₂ vibrations are confirming inter-relation between structural, optical, and thermal properties of the laser-structured crystalline HDPE inflation films. Birefringence modulation as high as Δn ∼ ± 1 × 10⁻³ is achieved with grating structures.     

THz generation via optical rectification with ultrashort laser pulse focused to a line

We report on efficient THz pulse generation via optical rectification with femtosecond laser pulses focused to a line by a cylindrical lens. This configuration provides phase-matched conditions in the superluminal regime. 35 pJ THz pulses have been generated with this technique in a stoichiometric LiNbO₃ crystal pumped by 2 μJ femtosecond laser pulses at room temperature. An unusual superquadratic rise of the THz pulse energy with the laser pulse energy has been observed at high laser energies. This extraordinary energy dependence of the THz generation efficiency is explained by self-focusing of the laser beam in the crystal. Z-scan measurements and comparison of the THz pulse spectra created with laser pulses having different energies confirm this interpretation.