Low-temperature thermodynamic properties of <Emphasis Type="Italic">L</Emphasis>-cysteine

Heat capacity C _p(T) of the orthorhombic polymorph of L-cysteine was measured in the temperature range 6–300 K by adiabatic calorimetry; thermodynamic functions were calculated based on these measurements. At 298.15 K the values of heat capacity, C _p; entropy, S _m⁰(T)-S _m⁰(0); difference in the enthalpy, H _m⁰(T)-H _m⁰(0), are equal, respectively, to 144.6±0.3 J K⁻¹ mol⁻¹, 169.0±0.4 J K⁻¹ mol⁻¹ and 24960±50 J mol⁻¹. An anomaly of heat capacity near 70 K was registered as a small, 3–5% height, diffuse ‘jump’ accompanied by the substantial increase in the thermal relaxation time. The shape of the anomaly is sensitive to thermal pre-history of the sample.     

Thermodynamic properties of carbosilane dendrimers of the seventh and ninth generations with terminal butyl groups in the temperature range from <Emphasis Type="Italic">T</Emphasis> → 0 to 600 K

Temperature dependences of the heat capacity of carbosilane dendrimers with butyl terminal groups of the seventh and ninth generations were determined in the temperature range from 6 to 600 K by precision adiabatic vacuum calorimetry and differential scanning (dynamic) calorimetry. The physical transitions were revealed and their thermodynamic characteristics were analyzed. The experimental data obtained were used to calculate the standard thermodynamic functions C _p (T), H°(T) − H°(0), S°(T), and G°(T) − H°(0) for the temperature range from T → 0 to 600 K. The thermodynamic function-molar weight isotherms for the dendrimers of the third–ninth generations with terminal butyl groups in the glassy and highly elastic state are linear. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1924–1928, October, 2007.     

Heat capacities and thermodynamic properties of (<Emphasis Type="Italic">S</Emphasis>)-<Emphasis Type="Italic">tert</Emphasis>-butyl 1-phenylethylcarbamate

An N-tert-butyloxycarbonylated organic synthesis intermediate, (S)-tert-butyl 1-phenylethylcarbamate, was prepared and investigated by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). The molar heat capacities of (S)-tert-butyl 1-phenylethylcarbamate were precisely determined by means of adiabatic calorimetry over the temperature range of 80-380 K. There was a solid–liquid phase transition exhibited during the heating process with the melting point of 359.53 K. The molar enthalpy and entropy of this transition were determined to be 29.73 kJ mol⁻¹ and 82.68 J K⁻¹ mol⁻¹ based on the experimental C _p–T curve, respectively. The thermodynamic functions, [H_T⁰ - H_298.15⁰ H_{T}^{0} - H_{298.15}^{0} ] and [S_T⁰ - S_298.15⁰ S_{T}^{0} - S_{298.15}^{0} ], were calculated from the heat capacity data in the temperature range of 80–380 K with an interval of 5 K. TG experiment showed that the pyrolysis of the compound was started at the temperature of 385 K and terminated at 510 K within one step.     

Mechanistic aspects of ligand substitution on <Emphasis Type="Italic">cis</Emphasis>-diaqua(<Emphasis Type="Italic">cis</Emphasis>-1,2-diaminocyclohexane)platinum(II) by Glycine-<Emphasis Type="SmallCaps">l</Emphasis>-Leucine

The kinetics of the interaction of glycine-l-leucine (Glyleu) with cis-[Pt(cis-dach)(OH₂)₂]²⁺ (dach = 1,2-diaminocyclohexane) has been studied spectrophotometrically as a function of [cis-[Pt(cis-dach)(OH₂)₂]²⁺], [Glyleu] and temperature at pH 4.0, where the complex exists predominantly as the diaqua species and Glyleu as a zwitterion. The substitution reaction shows two consecutive steps: the first is the ligand-assisted anation and the second is the chelation step. The activation parameters for both the steps were evaluated using Eyring’s equation. The low ∆H₁^≠ (51.9 ± 2.8 kJmol⁻¹) and large negative value of ∆S₁^≠ (−152 ± 8 JK⁻¹mol⁻¹) as well as ∆H₂^≠ (54.4 ± 1.7 kJmol⁻¹) and ∆S₂^≠ (−162 ± 5 JK⁻¹mol⁻¹) indicate an associative mode of activation for both the aqua ligand substitution processes.     

Heat capacities and thermodynamic properties of <Emphasis Type="Italic">N</Emphasis>-(tert-butoxycarbonyl)-<Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine (C<Subscript>14</Subscript>H<Subscript>19</Subscript>NO<Subscript>4</Subscript>)

The heat capacities of N-(tert-butoxycarbonyl)-l-phenylalanine (abbreviated to NTBLP in this article), as an important chemical intermediates used to synthesize proteins and polypeptides, were measured by means of a fully automated adiabatic calorimeter over the temperature range from 78 to 350 K. The measured experimental heat capacities were fitted to a polynomial equation as a function of temperature. The thermodynamic functions, H _T − H _298.15K and S _T − S _298.15K, were calculated based on the heat capacity polynomial equation in the temperature range of (80–350 K) with an interval of 5 K. The thermal stability of the compound was further studied using TG and DSC analyses; a possible mechanism for thermal decomposition of the compound was suggested.     

Thermodynamic properties of linear polyurethanes based on 1,6-hexamethylenediisocyanate with butane-1,4-diol and hexane-1,6-diol in the temperature range from T → 0 to 460 K

The temperature dependences of the heat capacity of partially crystalline linear polyurethanes based on 1,6-hexamethylenediisocyanate with butane-1,4-diol and hexane-1,6-diol were studied for the first time in a temperature range of 6–460 K by the methods of adiabatic vacuum and dynamic calorimetry. Physical changes in the state of polyurethanes were revealed and characterized; the standard thermodynamic functions, namely, C _p °(T), H°(T)-H°(0), S°(T), and G°(T)-H°(0), were calculated from the obtained experimental data in the temperature range from T → 0 to 460 K for the polymers in the crystalline, glassy, highly elastic, and liquid states. The energies of combustion of the polymers were measured by the bomb calorimetry method, and the standard thermodynamic characteristics of their formation at 298.15 K were calculated. The thermodynamic characteristics of bulk polycondensation of 1,6-hexamethylenediisocyanate with butane-1,4-diol and hexane-1,6-diol to form linear aliphatic polyurethanes-{4,6} and-{6,6} were determined in the range from T → 0 to 350 K at p° = 0.1 MPa. The thermodynamic properties of the polyurethanes under study and polymers of isomeric structure were compared. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 817–823, May, 2006.     

Thermochemistry on dodecylamine hydrochloride and <Emphasis Type="Italic">bis</Emphasis>-dodecylammonium tetrachlorozincate

Dodecylamine hydrochloride C₁₂H₂₅NH₃·Cl(s) and bis-dodecylammonium tetrachlorozincate (C₁₂H₂₅NH₃)₂ZnCl₄(s) were synthesized by the method of liquid phase reaction. The constant-volume energy of combustion of dodecylamine hydrochloride was measured by means of a RBC-II precision rotating-bomb combustion calorimeter at T = (298.15 ± 0.001) K. The standard molar enthalpy of formation of C₁₂H₂₅NH₃·Cl(s) was calculated to be \Updelta_f H_m^o \Updelta_{\rm{f}} H_{\rm{m}}^{\rm{o}} (C₁₂H₂₅NH₃·Cl, s) = −(706.79 ± 3.97) kJ mol⁻¹ from the constant-volume energy of combustion. In accordance with Hess’ law, a reasonable thermochemical cycle was designed and the enthalpy change of the synthesis reaction of the complex (C₁₂H₂₅NH₃)₂ZnCl₄(s) was determined by use of an isoperibol solution-reaction calorimeter. The standard molar enthalpy of formation of (C₁₂H₂₅NH₃)₂ZnCl₄(s) was calculated as \Updelta_f H_m^o \Updelta_{\rm{f}} H_{\rm{m}}^{\rm{o}} [(C₁₂H₂₅NH₃)₂ZnCl₄, s] = −(1862.14 ± 7.95) kJ mol⁻¹ from the standard molar enthalpy of formation of C₁₂H₂₅NH₃·Cl(s) and other auxiliary thermodynamic data.     

Low-temperature thermodynamic properties of <Emphasis Type="SmallCaps">dl</Emphasis>-cysteine

Heat capacity C _p(T) of the crystalline dl-cysteine was measured on heating the system from 6 to 309 K by adiabatic calorimetry; thermodynamic functions were calculated based on these data smoothed in the temperature range 6–273.15 K. The values of heat capacity, entropy, and enthalpy at 273.15 K were equal to 142.4, 153.3, and 213.80 J K⁻¹ mol⁻¹, respectively. At about 300 K, a heat capacity peak was observed, which was interpreted as an evidence of a first-order phase transition. The enthalpy and the entropy of the transition are equal, respectively, to 2300 ± 50 and 7.6 ± 0.1 J K⁻¹ mol⁻¹.     

Screening and Immobilization <Emphasis Type="Italic">Burkholderia</Emphasis> sp. GXU56 Lipase for Enantioselective Resolution of (<Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">S</Emphasis>)-Methyl Mandelate

Microorganisms producing lipase were isolated from soil and sewage samples and screened for enantioselective resolution of (R,S)-methyl mandelate to (R)-mandelic acid. A strain designated as GXU56 was obtained and identified as Burkholderia sp. Preparing immobilized GXU56 lipase by simple adsorption on octyl sepharose CL-4B, the optimum temperature was shifted from 40 °C (free lipase) to 50 °C (immobilized lipase), and the optimum pH was shifted from 8.0 (free lipase) to 7.2 (immobilized lipase). The immobilized enzyme displayed excellent stability in the pH range of 5.0–8.0, at the temperatures below 50 °C and in organic solvents compared with free enzyme. Enantioselectivity ratio for (R)-mandelic acid (E) was dramatically improved from 29.2 to more than 300 by applying immobilized lipase in the resolution of (R,S)-methyl mandelate. After five cycles of use of immobilized lipase, conversion and enantiomeric excess of (R)-mandelic acid were 34.5% and 98.5%, respectively, with enantioselectivity ratio for (R)-mandelic acid (E) of 230. Thus, octyl-sepharose-immobilized GXU56 lipase can be used as a bio-resolution reagent for producing (R)-mandelic acid.     

Thermodynamic characteristics of the complexation between Pb<Superscript>2+</Superscript> and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Bis(carboxymethyl)aspartic acid in aqueous solution

The enthalpies of complexation between N,N-bis(carboxymethyl)aspartic acid (H₄Y) and the Pb²⁺ ion at 298.15 K were determined from calorimetric data for a wide range of the ionic strengths (KNO₃). The thermodynamic characteristics ΔH, ΔG, and ΔS, of formation of the complexes PbHY⁻ and PbY²⁻ were calculated for zero and fixed ionic strengths. The results obtained were interpreted.     

Theoretical Study of the Interactions between Isolated <Emphasis Type="Italic">DNA</Emphasis> Bases and Various Groups IA and IIA Metal Ions by <Emphasis Type="Italic">Ab Initio</Emphasis> Calculations

Summary. Interactions of the DNA bases adenine (A), guanine (G), cytosine (C), and thymine (T) with various metal ions (M) of groups IA and IIA of the periodic table of the elements were studied at the HF, MP2, and DFT levels of theory. The structures and thermodynamic stabilities of these species were studied at the gas phase. The calculations uphold that there exist two active sites in G and one in A, C, and T. The calculations also show that the O² atom in T is a more active site for metal ion bindings than that in C. The stability energies for G … M complexes are larger than those for A … M complexes and the stability energies for T … M complexes are larger than those for C … M complexes. As z/r ratio for the metal ion increases, the interaction energy for the complex increases systematically. Thermodynamic quantities such as ΔH, ΔG, ΔS, and ln K were determined for each complexation reaction, [Base+M ⁿ⁺ →(Base … M) ⁿ⁺]. A, G, and C complexation reactions except for C … Rb⁺ are exothermic. The situation is quite different for T complexation reactions and all except for T … Be²⁺ and T … Mg²⁺ are endothermic.     

New lignans from <Emphasis Type="Italic">Syringa reticulata</Emphasis> var. <Emphasis Type="Italic">mandshurica</Emphasis>

In the search for platelet-activating-factor (PAF) antagonists, two new lignan compounds were isolated from the leaves of Syringa reticulata Hara var. mandshurica. Their structures were elucidated as (7R,8S, 8'S)-3,4,3',4'-dimethylenedioxy-8,9-dihydroxy-8.8', 7-O-9'-lignan (mandshuricol A) and (7R,8S,8'S)-3',4'methylenedioxy-4-methoxy-3,8,9-trihydroxy-8.8', 7-O-9'-lignan (mandshuricol B), Mandshuricol A and B showed antagonistic activity on PAF in the [³H] PAF receptor binding assay with IC₅₀ values of 4.8 × 10^–5 M and 3.5 × 10^–5 M, respectively.     

Thermodynamic characteristics of triphenylantimony bis(acetophenoneoximate)

The temperature dependence of heat capacity C _p ^° = f(T) of triphenylantimony bis(acetophenoneoximate) Ph₃Sb(ONCPhMe)₂ was measured for the first time in an adiabatic vacuum calorimeter in the range of 6.5–370 K and a differential scanning calorimeter in the range of 350–463 K. The temperature, enthalpy, and entropy of fusion were determined. Treatment of low-temperature (20 K ≤ T ≤ 50 K) heat capacity was performed on the basis of Debye’s theory of the heat capacity of solids and its multifractal model and, as a consequence, a conclusion was drawn on the type of structure topology. Standard thermodynamic functions C _p ^°(T), H°(T) — H°(0), S°(T), and G°(T) — H°(0) were calculated according to the experimental data obtained for the compound mentioned in the crystalline and liquid states for the range of T → 0–460 K. The standard entropy of the formation of crystalline Ph₃Sb(ONCPhMe)₂ was determined at T = 298.15 K.     

Pectinic substances from <Emphasis Type="Italic">Aloe arborescens</Emphasis>

Pectinic substances were isolated in 3.82% yield of the fresh material mass from leaves of Aloe arborescens Mill. (Asphodelaceae). Fractionation over DEAE-cellulose produced the dominant polymer APS-3 of molecular weight 71.1 kDa, [α]_D²⁰ +224.4°. Physicochemical methods established that APS-3 was a partially methoxylated and acetylated rhamnopolygalacturonan consisting of α-(1→4)-bonded galacturonic acid and α-(1→2)-bonded rhamnopyranose in the main chain. Side substituents of single galacto- and glucopyranose units were located on the C-3 atom of galacturonic acid.     

Minor asterosaponin archasteroside C from the starfish <Emphasis Type="Italic">Archaster typicus</Emphasis>

A new minor asterosaponin (20S)-6-O-{β-d-fucopyranosyl-(1→2)-[β-d-fucopyranosyl-(1→4)-β-d-quinovopyranosyl-(1→2)]-β-d-quinovopyranosyl-(1→3)-β-d-quinovopyranosyl}-3β,6α,20-trihydroxycholest-9(11)-en-23-one 3-sulfate (archasteroside C) was isolated from the starfish Archaster typicus collected in shallow coastal waters of Vietnam. The structure of archasteroside C was determined by 2D NMR spectroscopy and electrospray ionization (ESI) tandem mass spectrometry.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Adsorption of uranium(VI) onto <Emphasis Type="Italic">Ulva sp.</Emphasis>-sepiolite composite

Ulva sp. and sepiolite were used to prepare composite adsorbent. The adsorption of uranium(VI) from aqueous solutions onto Ulva sp.-sepiolite has been studied by using a batch adsorber. The parameters that affect the uranium(VI) adsorption, such as solution pH, initial uranium(VI) concentration, and temperature, have been investigated and the optimum conditions determined. The adsorption patterns of uranium on the composite adsorbent followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms. The Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) models have been applied and the data correlate well with Freundlich model. The sorption is physical in nature (sorption energy, E = 4.01 kJ/mol). The thermodynamic parameters such as variation of enthalpy ΔH, variation of entropy ΔS and variation of Gibbs free energy ΔG were calculated from the slope and intercept of lnK _d vs. 1/T plots. Thermodynamic parameters (ΔH _ads = −22.17 kJ/mol, ΔS _ads = −17.47 J/mol·K, ΔG ^o _ads (298.15 K) = −16.96 kJ/mol) show the exothermic heat of adsorption and the feasibility of the process. The results suggested that the Ulva sp-sepiolite composite adsorbent is suitable as a sorbent material for recovery and biosorption/adsorption of uranium ions from aqueous solutions.     

Triterpene glycosides from <Emphasis Type="Italic">Astragalus</Emphasis> and their genins. XC. Askendoside K from <Emphasis Type="Italic">Astragalus taschkendicus</Emphasis>

A new triterpene cycloartane glycoside called askendoside K was isolated from roots of Astragalus taschkendicus Bunge (Leguminosae). The structure of this glycoside was established using chemical and biochemical transformations and spectral data. Askendoside K was a bisdesmoside of cycloorbigenin C and had the structure 23R,24R-cycloartan-3β,6α,16β,23,24,25-hexaol 3-O-[(α-L-arabinopyranosyl)(1 → 2)-β-D-xylopyranoside],23-O-[(β-D-glucuronopyranosyl)(1 → 2)-β-D-glucopyranoside].     

Purification and Characterization of Chitinase from <Emphasis Type="BoldItalic">Paenibacillus</Emphasis> sp. D1

A 56.56-kDa extracellular chitinase from Paenibacillus sp. D1 was purified to 52.3-fold by ion exchange chromatography using SP Sepharose. Maximum enzyme activity was recorded at pH 5.0 and 50 °C. MALDI-LC-MS/MS analysis identified the purified enzyme as chitinase with 60% similarity to chitinase Chi55 of Paenibacillus ehimensis. The activation energy (E _a) for chitin hydrolysis and temperature quotient (Q ₁₀) at optimum temperature was found to be 19.14 kJ/mol and 1.25, respectively. Determination of kinetic constants k _m, V _max, k _cat, and k _cat/k _m and thermodynamic parameters ΔH*, ΔS*, ΔG*, ΔG*_E–S, and ΔG*_E–T revealed high affinity of the enzyme for chitin. The enzyme exhibited higher stability in presence of commonly used protectant fungicides Captan, Carbendazim, and Mancozeb compared to control as reflected from the t _1/2 values suggesting its applicability in integrated pest management for control of soil-borne fungal phytopathogens. The order of stability of chitinase in presence of fungicides at 80 °C as revealed from t _1/2 values and thermodynamic parameters E _a(d) (activation energy for irreversible deactivation), ΔH*, ΔG*, and ΔS* was: Captan > Carbendazim > Mancozeb > control. The present study is the first report on thermodynamic and kinetic characterization of chitinase from Paenibacillus sp. D1.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.