Photodegradation of aromatic amines by Ag-TiO2 photocatalyst

The photocatalytic degradation of ortho, para and meta-nitroanilines (ONA, PNA and MNA) was investigated by Ag-TiO₂ suspension. The effect of some parameters such as the amount of photocatalyst, irradiation time of UV light, flow rate of O₂, pH, and temperature for the Ag-TiO₂ photocatalyst was also examined. Degradation of amines was small when the reaction was carried out in the absence of photocatalyst, and negligible in the absence of the UV light. Degradation rate of aniline derivatives decreases with increasing O₂ in the system. The effect of pH indicated that effective degradation occurred in alkaline conditions. Degradation kinetics of these aromatic amines can be described by Langmuir-Hinshelwood equation and shows pseudo-first order law.     

Photocatalytic activity of polyaniline/Fe-doped TiO2 composites by in situ polymerization method

This study was focused on the photocatalytic activity of polyaniline (Pani)/iron doped titanium dioxide (Fe–TiO₂) composites for the degradation of methylene blue as a model dye. TiO₂ nanoparticles were doped with iron ions (Fe) using the wet impregnation method and the doped nanoparticles were further combined with Pani via an in situ polymerization method. For comparison purposes, Pani composites were also synthesized in the presence undoped TiO₂. The photocatalyst and the composites were characterized by standard analytical techniques such as FTIR, XRD, SEM, EDX and UV–Vis spectroscopies. Fe–TiO₂ and its composites exhibited enhanced photocatalytic activity under ultraviolet light irradiation. Improved photocatalytic activity of Fe–TiO₂ was attributed to the dopant Fe ions hindering the recombination of the photoinduced charge carriers. Pani/Fe–TiO₂ composite with 30?wt.% of TiO₂ nanoparticles achieved 28% dye removal and the discoloration rate of methylene blue for the sample was 0.0025?min^?1. FTIR, XRD, SEM, EDX and UV–Vis spectroscopies supported the idea that Fe ions integrated into TiO₂ crystal structure and Pani composites were successfully synthesized in the presence of the photocatalyst nanoparticles. The novelty of this study was to investigate the photocatalytic activity of Pani composites, containing iron doped TiO₂ and to compare their results with that of Pani/TiO₂.     

Photocatalytic decomposition of Trypan Blue over nanocomposite thin films

The photocatalytic activity of titanium dioxide and gold modified TiO₂ (Au/TiO₂), supported on polymethylmethacrylate (PMMA) thin film, was evaluated in the photodegradation of Trypan Blue (TB) under sunlight irradiation. The effect of parameters such as the photocatalyst amount and pH on TiO₂ photocatalytic activity is investigated. Oxygen flow stream was applied to enhance the decomposition process of TB. The maximum photoactivity was attained using Au/TiO₂-PMMA thin film at pH 2.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Photocatalytic degradation of polyhydroxybutyrate films using titanium dioxide nanoparticles as a photocatalyst

Photocatalytic degradation of polyhydroxybutyrate (PHB) polymeric films (30 μm thickness) containing different concentrations of titanium dioxide (TiO₂) nanoparticles under ultraviolet (UV) irradiation (λ_max = 313 nm) has been studied. The activity of TiO₂ (0.001-0.005%) as a photocatalyst was determined by monitoring various functional group indices, weight loss in polymeric films and photodegradation rate constant (k _d) with irradiation time. Photodegradation was found to be highly dependent on the TiO₂ nanoparticles concentration and the UV irradiation time. The rate of PHB sample photodegradation was highest when the concentration of TiO₂ was 0.005% (by weight) and lowest when its concentration was 0.001%.

     

Sustainable fabrication of silver-titania nanocomposites using goji berry (Lycium barbarum L.) fruit extract and their photocatalytic and antibacterial applications

Silver-titania nanocomposites (Ag-TiO₂ NCs) have unique functional attributes due to their photocatalytic and antibacterial properties. In this study, titania nanoparticles (TiO₂-NPs) were successfully in-situ decorated with silver nanoparticles (Ag-NPs) using the aqueous extract of goji berries (Lycium barbarum L.) as a bioreducing and stabilizing agent. Different Ag-TiO₂ NCs were synthesized by treating different concentrations of silver nitrate with a specific concentration of TiO₂-NPs in the presence of fruit extract. The green-synthesized NCs were characterized using several techniques viz., ultraviolet–visible spectrophotometry, X-ray diffractometry (XRD), scanning electron microscopy, field-emission transmission electron microscopy (FE-TEM), Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. XRD analysis revealed the formation of face-centered cubic (fcc) crystals, and FE-TEM analysis revealed the embedment of Ag-NPs throughout the surface of TiO₂-NPs. The average size of Ag-NPs on TiO₂-NPs increased from 11.2 ± 3.05 nm to 16.4 ± 4.5 nm with an increase in the concentration of silver ions, and the morphology of Ag-NPs was predominantly quasi-spherical and hexagonal. These NCs exhibited an excellent photocatalytic degradation of an azo dye, methylene blue (MB). The synthesized Ag-TiO₂ NCs (3:1) showed higher photocatalytic degradation efficiency of ∼ 93.4% for MB in 130 min under visible light irradiation. Ag-TiO₂ NC_S also exhibited good antibacterial activities towards Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). Therefore, the formation of Ag-NPs on the surface of TiO₂-NPs to form Ag-TiO₂ NCs exhibits eco-friendly photocatalytic degradation of azo dye contaminants as well as antibacterial activity.     

Heterogeneous Photocatalytic Degradation of Disulfoton in Aqueous TiO2 Suspensions: Parameter and Reaction Pathway Investigations

The photocatalytic degradation of organophosphorus insecticide disulfoton is investigated by having titanium dioxide (TiO₂) as a photocatalyst. About 99% of disulfoton is degraded after UV irradiation for 90 min. The effects of the solution pH, catalyst dosage, light intensity, and inorganic ions on the photocatalytic degradation of disulfoton are also investigated, as well as the reaction intermediates which are formed during the treatment. Eight intermediates have been identified and characterized through a mass spectra analysis, giving insight into the early steps of the degradation process. To the best of our knowledge, this is the first study reporting the degradation pathways of disulfoton. The results suggest that possible transformation pathways may involve in either direct electron or hole transfer to the organic substrate. The photodegradation of disulfoton by UV/TiO₂ exhibits pseudo‐first‐order reaction kinetics and a reaction quantum yield of 0.267. The electrical energy consumption per order of magnitude for photocatalytic degradation of disulfoton is 85 kWh/(m³ order).     

Degradation of C<Emphasis Type="Italic">andida albicans</Emphasis> on TiO<Subscript>2</Subscript> and Ag-TiO<Subscript>2</Subscript> thin films prepared by sol–gel and nanosuspensions

In this study, both suspensions and thin films of TiO₂ and silver loaded TiO₂ (Ag-TiO₂) were used in the photocatalytic degradation/disinfection of C. albicans. In the case of thin films coated materials, both microscope slides and steel pieces of similar dimensions were dip coated using sol–gel solutions prepared from titanium isopropoxide. Surface analysis of the materials confirmed that thin film formation had been succesful. After set periods of irradiation in the presence of suspension or thin film coated material, 10 μL aliquots of the solution were withdrawn and directly cultivated on sabouraud dextrose agar for 24 h at 37 °C. The number of living colonies was counted. The results show that both the suspensions and the thin films displayed superior antimicrobial properties towards C. albicans. In particular the Ag-TiO₂ catalyst was extremely active even in the dark, for disinfection of C. albicans. The degradation percentage over TiO₂ and Ag-TiO₂ thin films coated on the steel substrate was higher than those coated on glass achieving 80 and 97.9%, respectively, using the 365 nm, near visible region light source.     

Antibacterial inactivation of spiramycin after titanium dioxide photocatalytic treatment

The photocatalytic degradation of an antibiotic (spiramycin) has been studied using immobilized titanium dioxide (TiO₂) as a photocatalyst in a laboratory reactor under ultraviolet illumination (365 nm). The degradation of the antibiotic was monitored by ultraviolet spectrophotometry and high-pressure liquid chromatography and confirmed by an antibacterial activity evaluation. Two types of TiO₂ (P25 and PC500) immobilized on glass plates were compared. For TiO₂ PC500 immobilization on glass and paper was also studied. A slightly better degradation was obtained with TiO₂ P25 for which the degradation kinetics were investigated. The Langmuir–Hinshelwood kinetic model is satisfactorily obeyed at initial time and in the course of the reaction. Adsorption and apparent rate constants were determined. These results show a complete degradation of spiramycin, which was confirmed by the inhibition of the antibacterial activity of Staphylococcus xylosus, when exposed to spiramycin solutions treated with photocatalyst for a short time. In addition, the codegradation of spiramycin and tylosin was investigated and showed that tylosin had a higher affinity to the catalyst TiO₂ P25 than spiramycin. The complete degradation of spiramycin confirms the feasibility of such a photocatalytic treatment process for spiramycin elimination from contaminated water.     

TiO<Subscript>2</Subscript> photocatalytic oxidation: I. Photocatalysts for liquid-phase and gas-phase processes and the photocatalytic degradation of chemical warfare agent simulants in a liquid phase

The results of studies on the effect of the preparation procedure on the properties of TiO₂-based photocatalysts and the kinetics and mechanism of the photocatalytic oxidation of organic water pollutants are surveyed. The effects of calcination temperature, surface modification with platinum, and acid-base treatment of the surface of titanium dioxide on its activity in model gas-phase and liquid-phase reactions are considered. Optimal catalyst preparation conditions were found in order to achieve maximum activity, and conceivable reasons for the effects of the above factors on the activity were revealed. The intermediate products and mechanisms of the photocatalytic and dark reactions of solutes that simulated chemical warfare agents in water are considered. All of the test simulants can undergo complete oxidation to form inorganic products in an aqueous TiO₂ suspension under irradiation with UV light. It was found that, in addition to oxidation, the dark steps of hydrolysis also play an important role in the degradation of these substances. The low-frequency ultrasonic treatment (20 kHz) of a photocatalyst suspension in the course of the photocatalytic oxidation of dimethyl methylphosphonate can accelerate the reaction because of the facilitated transport of reactants to the surface of photocatalyst particles.__________Translated from Kinetika i Kataliz, Vol. 46, No. 2, 2005, pp. 203–218.Original Russian Text Copyright © 2005 by Vorontsov, Kozlov, Smirniotis, Parmon.     

Fe3+掺杂TiO2/凹凸棒复合光催化剂的制备和光催化活性

用酸催化溶胶-凝胶法制备了Fe³⁺掺杂TiO₂/凹凸棒（Fe³⁺-TiO₂/ATP）复合光催化剂,对其结构、微观形貌、光吸收性能和可见光下的光催化性能进行了表征。XRD和TEM测试结果表明,Fe³⁺-TiO₂/ATP具有较好的热稳定性,经450 ℃热处理后的ATP晶体结构基本保持不变,锐钛矿TiO2均匀的分布在ATP表面,TiO2颗粒之间无团聚,且平均粒径小于纯TiO₂。UV-Vis-DRS测试结果表明,Fe³⁺的掺杂可明显增强复合光催化剂对可见光的吸收,光响应范围拓展到了整个紫外-可见光区。在可见光下,Fe³⁺-TiO₂/ATP复合光催化剂对亚甲基蓝具有很好的催化降解活性。Fe³⁺-TiO₂/ATP的反应速率常数分别为TiO₂/ATP、P25和纯TiO2的1.37、4.83和6.51倍。复合光催化剂的沉降性能优于纯TiO2和P25,易于分离。     

Effect of dopant concentration on photocatalytic activity of TiO2 film doped by Mn non-uniformly

The thin films of TiO₂ doped by Mn non-uniformly were prepared by sol-gel method under process control. In our preceding study, we investigated in detail, the effect of doping mode on the photocatalytic activity of TiO₂ films showing that Mn non-uniform doping can greatly enhance the activity. In this study we looked at the effect of doping concentration on the photocatalytic activity of the TiO₂ films. In this paper, the thin films were characterized by UV-vis spectrophotometer and electrochemical workstation. The activity of the photocatalyst was also evaluated by photocatalytic degradation rate of aqueous methyl orange under UV radiation. The results illustrate that the TiO₂ thin film doped by Mn non-uniformly at the optimal dopant concentration (0.7 at %) is of the highest activity, and on the contrary, the activity of those doped uniformly is decreased. As a comparison, in 80 min, the degradation rate of methyl orange is 62 %, 12 % and 34 % for Mn non-uniform doping film (0.7 at %), the uniform doping film (0.7 at %) and pure titanium dioxide film, respectively. We have seen that, for the doping and the pure TiO₂ films, the stronger signals of open circuit potential and transient photocurrent, the better photocatalytic activity. We also discusse the effect of dopant concentration on the photocatalytic activity of the TiO₂ films in terms of effective separation of the photon-generated carriers in the semiconductor.     

Effects of S and Ta codoping on photocatalytic activity of rutile TiO<Subscript>2</Subscript>

In this study, pure titanium dioxide (TiO₂), Ta-doped TiO₂, S-doped TiO₂, and Ta-S-codoped rutile TiO₂ photocatalysts were prepared by a sol-gel method. To evaluate the properties of the synthesized samples, X-ray diffraction analysis (XRD) and X-ray photoelectron spectroscopy (XPS) were applied. XRD detection results showed that the samples contained rutile phase basically. Scanning electron microscope observation showed that the morphology of Ta-S-TiO₂ was nearly spherical. Transmission electron microscope investigation indicated that Ta-S-TiO₂ had a flower-shaped structure consisting of many nanorods. The measurement of Brunauer-Emmett-Teller (BET)-specific surface areas (S_BET) showed that tantalum and sulfur codoping can effectively increase the S_BET of TiO₂. XPS results indicated that Ta was in the form of Ta⁵⁺ in the TiO₂ structure. Finally, the photocatalytic activities of synthesized photocatalyst samples were measured for the degradation of methylene blue in ultraviolet and visible light irradiation. The results demonstrated that the Ta-S-codoped rutile TiO₂ photocatalyst had better photocatalytic performance than pure rutile TiO₂, Ta-doped rutile TiO₂ and S-doped rutile TiO₂ photocatalyst.

Open image in new window

Effects of pure TiO₂, Ta-TiO₂, S-TiO₂, and Ta-S-TiO₂ on degradation of MB under visible light irradiation (a) and ultraviolet (UV) irradiation (b) were studied. Ta-S-TiO₂ exhibited a good photocatalytic performance under UV and visible light irradiation.

     

可磁分离二氧化钛光催化剂的制备及其光催化性能

通过液相催化相转化的方法制备了一种可磁分离的光催化剂TiO₂/SiO₂/NiFe₂O₄(TSN),这种光催化剂显示出了超顺磁性,能够通过外加磁场方便的实现催化剂在水中的分离与回收。该光催化剂的X-射线衍射和TEM结果表明：纳米TiO₂颗粒包裹在磁性颗粒-SiO₂/NiFe₂O₄(SN)的周围形成TiO₂层。利用光催化降解甲基橙的效果来考察了这种光催化剂的活性,结果表明：在NiFe₂O₄和TiO₂之间包覆一层无定型的SiO₂,可以显著的提高催化剂的脱色效果,3次循环后,仍能保持良好的催化活性。     

Comparison of photocatalysis degradation of 4-nitrophenol using N,S co-doped TiO2 nanoparticles synthesized by two different routes

The photocatalytic degradation of 4-nitrophenol as pollutant in aqueous solutions was investigated under visible light irradiation over two different N?CS-codoped anatase TiO₂ catalysts prepared by sol?Cgel methods using titanium isopropoxide and titanium tetrachloride as two different precursors. The catalysts were characterized by XRD, SEM, DRS, EDAX and FT-IR. The effects of various operating parameters including the initial concentration of 4-nitrophenol (2?C14?ppm), solution pH (5?C8) and kinetic reactions were studied. The optimum solution pH was at around 6. For comparison purpose, the photodegradation activity of the commercial Degussa P-25 TiO₂ catalyst has also been studied. The results indicated that photocatalytic activity of N?CS-codoped TiO₂ with titanium isopropoxide as precursor was higher than N?CS-codoped TiO₂ with titanium tetrachloride as precursor and Degussa P-25.     

Synthesis of CuAPTPP-TDI-TiO2 Conjugated Microspheres and its Photocatalytic Activity (cited: 1)

The metal complex 5-(4-aminophenyl)-10,15,20-triphenylporphyrin copper (CuAPTPP) was covalently linked on the surface of TiO₂ microspheres by using toluene disocyanate (TDI) as a bridging bond unit. The hydroxyl group (-OH) of TiO₂ microspheres surface and the amino group (-NH₂) of CuAPTPP reacted respectively with the active -NCO groups of TDI to form a surface conjugated microsphere CuAPTPP-TDI-TiO₂ that was confirmed by FT-IR spectra. The CuAPTPP-TDI-TiO₂ microspheres were characterized with UV-visible, elemental analysis, XRD, SEM, and UV-Vis diffuse reflectance spectra. The effect of amounts of linked TDI on the performance of photocatalytic microspheres was discussed, and the optimal molar ratio of TDI:TiO₂ was established. The photocatalytic activity of CuAPTPP-TDI-TiO₂ was evaluated using the photocatalytic degradation of methylene blue (MB) under visible-light irradiation. The results showed that, TDI, as a bond unit, was used to form a steady chemical brigdging bond linking CuAPTPP and the surface of TiO₂ microspheres, and the prepared catalyst exhibited higher photocatalytic activity under visible-light irradiation for MB degradation. The degradation rate of 20 mg/L MB could reach 98.7% under Xe-lamp (150 W) irradiation in 120 min. The degradation of MB followed the first-order reaction model under visible light irradiation, and the rate constant of 5.1×10^-2 min^-1 and the half-life of 11.3 min were achieved. And the new photocatalyst can be recycled for 4 times, remaining 90.0% MB degradation rate.     

Photocatalytic performance of silver-modified TiO2 embedded in poly(ethyl-acrylate-co-methyl metacrylate) matrix

The plasmonic Ag-TiO₂ (with 0.5 wt% Ag) photocatalyst was prepared on P25 TiO₂ surface. The presence of AgNPs on the titania was indicated by the UV–vis spectrum, which showed a plasmonic absorbance band in the visible range (λ _max?=?455 nm). XPS measurements suggested that Ag was in metallic (Ag) and in oxide forms on TiO₂. Ag-TiO₂ photocatalyst and TiO₂ were embedded in [poly(ethyl acrylate-co-methyl methacrylate; p(EA-co-MMA)] copolymer to attain mechanically stable, photocatalytically active nanocomposite films. The photooxidation of ethanol was slower on the photocatalyst/polymer nanocomposites, but it could be significantly improved by irradiating them with UV light. The photoaging was applied as a post-preparation treatment to improve the photocatalytic activity of the nanocomposite films. Changed surface morphology and the partial destruction of the polymer were supported by AFM and FTIR results. Contact angle measurements were used to determine the surface free energies of the prepared and the photoaged nanocomposite films.     

Solid-phase photocatalytic degradation of polystyrene plastic with TiO2 as photocatalyst

Solid-phase photocatalytic degradation of polystyrene (PS) plastic with TiO₂ as photocatalyst was investigated in the ambient air under ultraviolet light irradiation. Higher weight loss rate, lower average molecular weight, increased carbonyl peak intensity, less volatile organics and more CO₂ emitted with irradiation in PS-TiO₂ composite sample compared to pure PS sample were observed. These facts indicated the higher photodegradation rate of PS-TiO₂ sample than that of PS sample, and emphasized the potential of the composite sample in bring about complete photodegradation of polystyrene plastic. It is implied that the degradation initially occurred over TiO₂ particles, followed by the diffusion reaction with the aid of reactive oxygen species generated on TiO₂ particle surface.     

Thermal behaviour of titanium dioxide nanoparticles prepared by precipitation from aqueous solutions

Thermogravimetry-differential thermal analysis, emanation thermal analysis, mass spectrometry detection, Fourier transform infrared and XRD were used to characterize thermal behaviour of titanium dioxide photocatalyst precursors prepared by precipitation at various conditions from peroxotitanic acid sols. The transmission electron microscopy HRTEM technique was used to characterize the surface microstructure. The sols contained TiO₂ anatase particles of approximately 10 nm in diameter. During heating of the air dried samples, their chemical degradation took place giving rise to anatase. On further heating, the crystallization of anatase and formation of rutile phase was observed. To test the photocatalytic activity of the samples, the decomposition of 4-chlorophenol (4-CP) under ultraviolet and visible irradiation was monitored. It was shown that photocatalytic activities of the samples are comparable to the Degussa P25 photocatalyst reference material.     

Ion engineering techniques for the preparation of the highly effective TiO<Subscript>2</Subscript> photocatalysts operating under visible light irradiation

The successful application of ion engineering techniques for the development of TiO₂ photocatalysts operating under visible and/or solar light irradiations has been summarized in this review article. First, we have physically doped various transition metal ions within a TiO₂ lattice on an atomic level by using an advanced metal ion implantation method. The metal ion implanted TiO₂ could efficiently work as a photocatalyst under visible light irradiation. Some field tests under solar light irradiation clearly revealed that the Cr or V ions implanted TiO₂ samples showed 2–3 times higher photocatalytic reactivity than the un-implanted TiO₂. Second, we have developed the visible light responsive TiO₂ thin film photocatalyst by a single process using an RF-magnetron sputtering (RF-MS) deposition method. The vis-type TiO₂ thin films showed high photocatalytic reactivity for various reactions such as reduction of NOx, degradation of organic compounds, and splitting of H₂O under visible and/or solar light irradiations.