Vanadium phosphates on mesoporous supports: model catalysts for solid-state NMR studies of the selective oxidation of n-butane

SBA-15 was utilized as mesoporous support for the dispersion of vanadium phosphate (VPO) compounds. Loading of SBA-15 with VPO compounds was found to be accompanied by decreasing ²⁹Si MAS NMR signals of Q² (Si(2Si,2OH)) and Q³ (Si(3Si,1OH)) silicon species, which indicates coverage of the mesoporous support by the guest compounds. The ⁵¹V MAS NNR spectra of the activated VPO/SBA-15 catalysts consist of patterns typical for the α_II- and β-phases of vanadyl orthophosphate. In the ³¹P MAS NMR spectra of the activated VPO/SBA-15 catalysts, signals of β-, δ-, and α_II-VOPO₄ phases could be identified. Upon conversion of n-butane-¹³C₄, a strong decrease of the ³¹P MAS NMR signals characteristic for the δ-VOPO₄ phase occurred, while by ¹³C MAS NMR spectroscopy the formation of maleic anhydride, carbon monoxide, and carbon dioxide was observed. This finding supports the active role of the δ-VOPO₄ phase in the selective oxidation of n-butane on VPO/SBA-15 catalysts.     

Regulating the surface of nanoceria and its applications in heterogeneous catalysis

Ceria (CeO₂) as a support, additive, and active component for heterogeneous catalysis has been demonstrated to have great catalytic performance, which includes excellent thermal structural stability, catalytic efficiency, and chemoselectivity. Understanding the surface properties of CeO₂ and the chemical reactions occurred on the corresponding interfaces is of great importance in the rational design of heterogeneous catalysts for various reactions. In general, the reversible Ce³⁺/Ce⁴⁺ redox pair and the surface acid-base properties contribute to the superior intrinsic catalytic capability of CeO₂, and hence yield enhanced catalytic phenomenon in many reactions. Particularly, nanostructured CeO₂ is characterized by a large number of surface-bound defects, which are primarily oxygen vacancies, as the surface active catalytic sites. Many efforts have therefore been made to control the surface defects and properties of CeO₂ by various synthetic strategies and post-treatments. The present review provides a comprehensive overview of recent progress in regulating the surface structure and composition of CeO₂ and its applications in catalysis.     

Surface chemistry and catalysis of oxide model catalysts from single crystals to nanocrystals

Fundamental understandings of surface chemistry and catalysis of solid catalysts are of great importance for the developments of efficient catalysts and corresponding catalytic processes, but have been remaining as a challenge due to the complex nature of heterogeneous catalysis. Model catalysts approach based on catalytic materials with uniform and well-defined surface structures is an effective strategy. Single crystals-based model catalysts have been successfully used for surface chemistry studies of solid catalysts, but encounter the so-called “materials gap” and “pressure gap” when applied for catalysis studies of solid catalysts. Recently catalytic nanocrystals with uniform and well-defined surface structures have emerged as a novel type of model catalysts whose surface chemistry and catalysis can be studied under the same operational reaction condition as working powder catalysts, and they are recognized as a novel type of model catalysts that can bridge the “materials gap” and “pressure gap” between single crystals-based model catalysts and powder catalysts. Herein we review recent progress of surface chemistry and catalysis of important oxide catalysts including CeO₂, TiO₂ and Cu₂O acquired by model catalysts from single crystals to nanocrystals with an aim at summarizing the commonalities and discussing the differences among model catalysts with complexities at different levels. Firstly, the complex nature of surface chemistry and catalysis of solid catalysts is briefly introduced. In the following sections, the model catalysts approach is described and surface chemistry and catalysis of CeO₂, TiO₂ and Cu₂O single crystal and nanocrystal model catalysts are reviewed. Finally, concluding remarks and future prospects are given on a comprehensive approach of model catalysts from single crystals to nanocrystals for the investigations of surface chemistry and catalysis of powder catalysts approaching the working conditions as closely as possible.     

Solid-state NMR investigations of Si-29 and N-15 enriched silicon nitride

We compare ²⁹Si magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectra from the two modifications of silicon nitride, α-Si₃N₄ and β-Si₃N₄, with that of a fully (²⁹Si, ¹⁵N)-enriched sample ²⁹Si₃¹⁵N₄, as well as ¹⁵N NMR spectra of Si₃¹⁵N₄ (having ²⁹Si at natural abundance) and ²⁹Si₃¹⁵N₄. We show that the ¹⁵N NMR peak-widths from the latter are dominated by J(²⁹Si–¹⁵N) through-bond interactions, leading to significantly broader NMR signals compared to those of Si₃¹⁵N₄. By fitting calculated ²⁹Si NMR spectra to experimental ones, we obtained an estimated coupling constant J(²⁹Si–¹⁵N) of 20 Hz. We provide ²⁹Si spin-lattice (T₁) relaxation data for the ²⁹Si₃¹⁵N₄ sample and chemical shift anisotropy results for the ²⁹Si site of β-Si₃N₄. Various factors potentially contributing to the ²⁹Si and ¹⁵N NMR peak-widths of the various silicon nitride specimens are discussed. We also provide powder X-ray diffraction (XRD) and mass spectrometry data of the samples.     

Preparation of periodic mesoporous silica-included divacant Keggin units for the catalytic oxidation of styrene to synthesize styrene oxide

Periodic mesoporous composite catalysts, [(n-C₄H₉)₄N]₄[γ-SiW₁₀O₃₄(H₂O)₂]/SBA-15 (TBA-1*/SBA-15, where TBA-1* = [(n-C₄H₉)₄N]₄[γ-SiW₁₀O₃₄(H₂O)₂]), with TBA-1* loadings of 4.3-14.8% were prepared by simultaneous hydrolysis and co-condensation of the tetraethoxysilane (TEOS) in the presence of divacant Keggin-type polyoxometalate and triblock copolymer surfactant (P123) followed by hydrothermal treatment process. Structure integrity of the Keggin unit in as-prepared composites was studied by Fourier transform infrared spectroscopy (FT-IR), Raman scattering spectra, and ²⁹Si magic-angle spinning (MAS) NMR. Periodic mesoporous structure of the composites was evaluated by low-angle X-ray powder diffraction (LXRD) patterns, nitrogen porosimetry, and transmission electron microscope (TEM) measurements. As-prepared TBA-1*/SBA-15 was used as an heterogeneous oxidation catalyst for the styrene epoxidation reaction to synthesize styrene oxide in the presence of dilute H₂O₂ (30%), and influences of solvent, molar ratio of styrene to H₂O_2, TBA-1* loading on the styrene conversion, styrene oxide yield and selectivity were considered.     

N Chemical Shift Tensor Magnitude and Orientation in the Molecular Frame of Uracil Determined via MAS NMR

The potential of heteronuclear MAS NMR spectroscopy for the characterization of ¹⁵N chemical shift (CS) tensors in multiply labeled systems has been illustrated, in one of the first studies of this type, by a measurement of the chemical shift tensor magnitude and orientation in the molecular frame for the two ¹⁵N sites of uracil. Employing polycrystalline samples of ¹⁵N₂ and 2-¹³C,¹⁵N₂-labeled uracil, we have measured, via ¹⁵N–¹³C REDOR and ¹⁵N–¹H dipolar-shift experiments, the polar and azimuthal angles (θ, ψ) of orientation of the ¹⁵N–¹³C and ¹⁵N–¹H dipolar vectors in the ¹⁵N CS tensor frame. The (θ_NC, ψ_NC) angles are determined to be (92 ± 10°, 100 ± 5°) and (132 ± 3°, 88 ± 10°) for the N1 and N3 sites, respectively. Similarly, (θ_NH, ψ_NH) are found to be (15 ± 5°, −80 ± 10°) and (15 ± 5°, 90 ± 10°) for the N1 and N3 sites, respectively. These results obtained based only on MAS NMR measurements have been compared with the data reported in the literature.     

Nanosecond-Flash 15N Photo-CIDNP MAS NMR on Reaction Centers of Rhodobacter sphaeroides R26

Photochemically induced dynamic nuclear polarization (photo-CIDNP) is observed with time-resolved ¹⁵N magic-angle spinning (MAS) nuclear magnetic resonance (NMR) in uniformly ¹⁵N-labeled reaction centers (RCs) of the purple bacterium Rhodobacter (Rb.) sphaeroides R26 under illumination with nanosecond laser flashes. The ¹⁵N NMR signals enhanced by the solid-state photo-CIDNP effect are related to electron spin densities in the primary radical pair and allow for reconstruction of the electronic structure at atomic scale. New assignments for the photochemically active nitrogens are proposed based on simulations of the intensities. The ratio of electron spin densities between cofactors P _L and P _M is observed to be about 4:1. The origin of the high asymmetry is discussed.     

A 15N NMR Study of Some Imidazolidine-2,4-Dichalcogen Derivatives

The ¹⁵N NMR chemical shifts and ¹(¹⁵N-¹H) coupling constants of a series of imidazolidine-2,4-dichalcogen (O, S) derivatives are reported.The ¹⁵N NMR chemical shifts show a linear correlatlon wlth the vNH stretchlng vlbratlons. The influence of the substitution of the oxygen at C₂ and/or C₄ with the sulphur, and of the hydrogen at C₅ wlth the methyls and phenyls has been considered. The ¹J(¹⁵N-¹H)'s found In thls serles of molecules agrees well with the expected values.     

A15N-1H dipolar CSA solid-state NMR study of polymorphous polyglycine (-CO-CD2-15NH-)n

The solid-state¹H MAS (magic-angle spinning),²H static,¹⁵N CP (cross polarization)-MAS and¹⁵N-¹H dipolar CSA (chemical shielding anisotropy) NMR (nuclear magnetic resonance) spectra of two different modifications of C_α-deuterated^l5N-polyglycine, namely PG I and PG II (-CO-CD₂-^l5NH-)_n are measured. The data from these spectra are compared to previous NMR, infrared, Raman and inelastic neutron scattering work. The deuteration of C_α eliminates the largest intramolecular¹H-¹H dipolar coupling. The effect of the remaining (N)H-(N)H interaction (～5 kHz) is not negligible compared to the¹⁵N-¹H coupling (about 10 kHz). Its effect on the dipolar CSA spectra, described as a two-spin system, is analyzed analytically and numerically and it is shown that those parts of the powder spectrum, which correspond to orientations with a strong dipolar¹⁵N-¹H interaction, can be described as an effective two-spin system, permitting the measurement of the strength of the¹⁵N-¹H dipolar interaction and the orientation of the dipolar vector with respect to the¹⁵N CSA frame. While in the PG II system the¹⁵N CSA tensor is collinear with the amide plane, in the PG I system the CSA tensor is tilted ca. 16° with respect to the (δ₁₁δ₂₂) CSA plane.     

Structure and acid-base properties of surface-modified mesoporous silica

A series of surface-modified mesoporous silica endowing with acid-base properties have been successfully synthesized in one pot by in situ introduction of zirconium and magnesium salts into the initial mixture of synthesizing mesoporous silica (SBA-15) and this method combines into a single step to form a novel material with a periodically ordered mesoporous backbone and specific chemical reactivity of the acid-basic sites. X-ray diffraction, high-resolution transmission electron microscopes (HRTEM), N₂ adsorption, FT-IR transmission spectra, ²⁹Si MAS NMR spectra, NH₃- and CO₂-temperature programmed desorption (TPD) are employed to characterize the titled mesoporous materials. The results indicate that the product possesses excellent acid-basic properties with well mesoporous structure, which make it promising for their application in heterogeneous catalysis and adsorption-separation processes.     

Bulk magnetization and 1H NMR spectra of magnetically heterogeneous model systems

Bulk magnetization and ¹H static and magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectra of two magnetically heterogeneous model systems based on laponite (LAP) layered silicate or polystyrene (PS) with low and high proton concentration, respectively, and ferrimagnetic Fe₂O₃ nano- or micro-particles have been studied. In LAP+Fe₂O₃, a major contribution to the NMR signal broadening is due to the dipolar coupling between the magnetic moments of protons and magnetic particles. In PS+Fe₂O₃, due to the higher proton concentration in polystyrene and stronger proton–proton dipolar coupling, an additional broadening is observed, i.e. ¹H MAS NMR spectra of magnetically heterogeneous systems are sensitive to both proton–magnetic particles and proton–proton dipolar couplings. An increase of the volume magnetization by ～1 emu/cm³ affects the ¹H NMR signal width in a way that is similar to an increase of the proton concentration by ～2×10²²/cm³. ¹H MAS NMR spectra, along with bulk magnetization measurements, allow the accurate determination of the hydrogen concentration in magnetically heterogeneous systems.     

EPIC- and CHANCE-HSQC: Two N-photo-CIDNP-enhanced pulse sequences for the sensitive detection of solvent-exposed tryptophan

Photochemically induced dynamic nuclear polarization (photo-CIDNP) of nuclei other than ¹H offers a tremendous potential for sensitivity enhancement in liquid state NMR under mild, physiologically relevant conditions. Photo-CIDNP enhancements of ¹⁵N magnetization are much larger than those typically observed for ¹H. However, the low gyromagnetic ratio of ¹⁵N prevents a full fruition of the potential signal-to-noise gains attainable via ¹⁵N photo-CIDNP. Here, we propose two novel pulse sequences, EPIC- and CHANCE-HSQC, tailored to overcome the above limitation. EPIC-HSQC exploits the strong ¹H polarization and its subsequent transfer to non-equilibrium N_z magnetization prior to ¹⁵N photo-CIDNP laser irradiation. CHANCE-HSQC synergistically combines ¹H and ¹⁵N photo-CIDNP. The above pulse sequences, tested on tryptophan (Trp) and the Trp-containing protein apoHmpH, were found to display up to 2-fold higher sensitivity than the reference NPE-SE-HSQC pulse train (based on simple ¹⁵N photo-CIDNP followed by N–H polarization transfer), and up to a ca. 3-fold increase in sensitivity over the corresponding dark pulse schemes (lacking laser irradiation). The observed effects are consistent with the predictions from a theoretical model of photo-CIDNP and prove the potential of ¹⁵N and ¹H photo-CIDNP in liquid state heteronuclear correlation NMR.     

Application of NMR Spectroscopy and Imaging in Heterogeneous Biocatalysis

Heterogeneously catalyzed enzymatic glucose isomerization was considered as a model process to extend the application of nuclear magnetic resonance (NMR) and magnetic resonance imaging techniques to the studies of biocatalytic processes and heterogeneous biocatalysts. It has been demonstrated that the T ₂ times of glucose are different for its aqueous solution in the pores of an unmodified porous support and in a heterogeneous biocatalyst, comprising bacterial cells immobilized on the same support. This observation has been used to map the spatial distribution of the active component within a packed bed of biocatalyst in a model reactor. ¹³C NMR spectroscopy was applied to follow the progress of glucose isomerization catalyzed by the heterogeneous biocatalyst in a batch reactor. The utilization of proton spin decoupling and nuclear Overhauser effect was shown to be necessary to obtain high signal-to-noise ratio in the natural abundance ¹³C NMR spectra of a glucose–fructose syrup present in the packed bed of biocatalyst. The spectra thus obtained were suitable for the quantification of the glucose-to-fructose ratio achieved in the biocatalytic reaction.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Is it possible to use the 31P chemical shifts of phosphines to measure hydrogen bond acidities (HBA)? A comparative study with the use of the 15N chemical shifts of amines for measuring HBA

The geometries, energies, and nuclear magnetic resonance (NMR) chemical shifts of 3 bases (trimethylphosphine, trimethylamine, and trimethylphosphine oxide), their 3 protonated cations, and 15 hydrogen‐bonded complexes (corresponding to the HF, HNC, HCN, HCCH, H₂O, and CH₃OH Brønsted acids) have been calculated at the B3LYP/6‐311++G(d,p) level. The determination of hydrogen bond acidities by NMR is classically performed using the ³¹P chemical shifts Me₃PO. This method is more reliable than the use of the ¹⁵N NMR chemical shifts of Me₃N. This work shows that the ³¹P NMR chemical shifts of Me₃P cannot be used. The raison of the difference between Me₃P on one hand and Me₃PO and Me₃N on the other will be discussed.     

A versatile sonication-assisted deposition–reduction method for preparing supported metal catalysts for catalytic applications

This work aims to develop a rapid and efficient strategy for preparing supported metal catalysts for catalytic applications. The sonication-assisted reduction–precipitation method was employed to prepare the heterogeneous mono- and bi-metallic catalysts for photocatalytic degradation of methyl orange (MO) and preferential oxidation (PROX) of CO in H₂-rich gas. In general, there are three advantages for the sonication-assisted method as compared with the conventional methods, including high dispersion of metal nanoparticles on the catalyst support, the much higher deposition efficiency (DE) than those of the deposition–precipitation (DP) and co-precipitation (CP) methods, and the very fast preparation, which only lasts 10–20 s for the deposition. In the AuPd/TiO₂ catalysts series, the AuPd(3:1)/TiO₂ catalyst is the most active for MO photocatalytic degradation; while for PROX reaction, Ru/TiO₂, Au–Cu/SBA-15 and Pt/γ-Al₂O₃ catalysts are very active, and the last one showed high stability in the lifetime test. The structural characterization revealed that in the AuPd(3:1)/TiO₂ catalyst, Au–Pd alloy particles were formed and a high percentage of Au atoms was located at the surface. Therefore, this sonication-assisted method is efficient and rapid in the preparation of supported metal catalysts with obvious structural characteristics for various catalytic applications.     

NMR studies on hydrogen bonding and proton transfer in Mannich bases

A review of studies on the ortho Mannich bases containing various substituents in the phenyl ring on the basis of¹H,¹³C and¹⁵N nuclear magnetic resonance (NMR) spectra in various solvents over the temperature range 110–298 K is presented. Some new results are also included. The data gathered so far show that there is some critical (inversion) range of ΔpK _a (= pK _a(NH⁺) − pK _a(OH)) in which the proton transfer equilibrium appears. This inversion range is well reflected in the behaviour of secondary deuterium isotope effect in¹³C NMR spectra. A strong temperature effect on the strength of hydrogen bonding should be emphasized. The¹H chemical shift for trichloroderivative increases from 13.5 at room temperature up to 17 ppm at 130 K when the proton is equally shared between the bridging atoms (¹ J(¹H,¹⁵N) = 30–40 Hz). The potential for the proton motion in such bridges is discussed taking into account the behaviour in the ultraviolet and infrared spectra. The role of dimerization in proton transfer equilibria is shown. In addition the rotation of OH groups involved in hydrogen bond formation and nitrogen pyramidal inversion was studied by the¹H dynamical NMR spectra.     

Piperidine‐appended imidazolium ionic liquids as task‐specific catalysts: computational study,synthesis, and multinuclear NMR

Imidazolium ionic liquids (IMILs) with a piperidine moiety appended via variable length methylene spacers (with n = 1–4) were studied computationally to assess their potential to act as internal base for N‐heterocyclic carbene (NHC) generation. Proton transfer energies computed by B3LYP/6‐311+G(2d,p) were least endothermic for the basic‐IL with n = 3, whose optimized structure showed the shortest C₂‐H‐‐‐‐N(piperidine) distance. Inclusion of counter anion (Cl or NTf₂) caused dramatic conformational changes to enable close contact between the acidic C₂‐H and the anions. To examine the prospect for internal C₂‐H‐‐‐‐N coordination, multinuclear NMR data (¹H, ¹⁵N, and ¹³C) were computed by gauge independent atomic orbitals–density functional theory (GIAO‐DFT) in the gas phase and in several solvents by the PCM method for comparison with the experimental NMR data for the basic ILs (with n = 2–4) synthesized in the laboratory. These studies indicate that interactions with solvent and counter ion are dominant forces that could disrupt internal C₂‐H‐‐‐‐N coordination/proton transfer, making carbene generation from these basic‐ILs unlikely without an added external base. Therefore, the piperidine‐appended IMILs appear suitable for application as dual solvent/base in organic/organometallic transformations that require the use of mild base, without the necessity to alkylate at C‐2 to prevent N‐heterocyclic carbene formation. Copyright © 2016 John Wiley & Sons, Ltd.     

High-Temperature Phase Transition in N(CH3)4CdCl3 Studied Using Static NMR and MAS NMR

To clarify the nature of microscopic structural changes of N(CH₃)₄CdCl₃ at high temperatures, the nuclear magnetic resonance (NMR) spectra of the protons and carbons in N(CH₃)₄CdCl₃ were measured. NMR studies of the ¹H and ¹³C spin–lattice relaxation time, T _1ρ, in the rotating frame were also performed. No changes in the T _1ρ of ¹H and ¹³C associated with the N(CH₃)₄ groups were observed at the high-temperature transition from phase I to phase I′. However, the ¹⁴N NMR spectra reflected changes in the structural geometry during the transition to phase I′, indicating that this transition is driven by N(CH₃)₄.     

Green approaches via nanocatalysis with nanoporous materials: Functionalization of mesoporous materials for single site catalysis

Among the various green keys, catalysis, especially using heterogeneous catalysts, has been powerfully applied to achieve greener chemical processes. Here are presented nanoporous materials which have mesoporosity with the functional groups on the inner pore walls. The materials were synthesized via a rather greener process, such as microwave synthesis, and over these nanocatalysts some of the green chemical reactions were carried out with high activities and selectivities. Cobalt species has been successfully functionalized and stabilized as a Co(III) complex onto SBA-15 support and proven to be an active catalyst in alkylaromatic oxidation with molecular oxygen, styrene epoxidation with tert-butyl hydroperoxide (TBHP), and allylic oxidation of cycloolefins with H₂O₂. Short-channeled amino-functionalized SBA-15 catalyst with hexagonal plate morphology was synthesized directly by using microwave synthesis from the co-condensation of aminopropyl triethoxysilane (APTES) and sodium metasilicate under a strong acidic condition. The catalyst showed high catalytic activity in liquid-phase Knoevenagel condensation reactions, due to easy diffusion and mass transfer of substrates into the short mesopore channel. The HO₃S–SBA-15 was prepared by grafting of mercaptopropyl trimethoxysilane onto the calcined mesoporous silica surface and subsequently oxidized with H₂O₂. The resulting catalyst was applied as a Bronsted solid-acid catalyst for the esterification of oleic acid with methanol.