基于微光学结构的空芯光子带隙光纤环形谐振腔研究

光纤环形谐振腔是构成谐振式光纤陀螺的核心部件。提出了一种基于微光学结构的空芯光子带隙光纤环形谐振腔。建立了这种谐振腔的归一化传递函数模型,并且仿真分析了微光学结构参数与谐振腔特性和陀螺的极限灵敏度的关系。研制出基于微光学结构的空芯光子带隙光纤谐振腔的实验样品,完成了样品性能测试,在此基础上提出了下一步优化方案。研究结果为未来进一步研究基于微光学结构的谐振式空芯光子带隙光纤陀螺提供了理论和实验依据。     

Ring resonator of surface modes based on photonic crystals

We design a compact ring resonator of surface modes based on photonic crystals (PCs). The structure is formed by sandwiching a surface mode ring waveguide (SMRW) into two parallel surface mode waveguide (SMW) based on two dimensional (2D) PCs. The SMRW is created on the surface of a circular photonic crystal (CPC) structure, where the wave propagates with high transmission efficiency. As a fundamental mode is introduced in the input SMW, at certain frequencies, the SMRW modes are enhanced because of resonance and the light-waves are coupled to the output SMW. It is demonstrated by the simulation results that the surface mode ring resonator has a low radiation loss with a very small size because of the good wave-guiding of surface mode based on PCs, and can be used in the future wavelength division multiplex (WDM) optics communication systems.     

Investigation of ring resonators in photonic crystal circuits

In this paper, we propose the implementation of waveguide-coupled ring resonators in photonic crystal integrated circuits. Using two-dimensional finite difference time domain (2D FDTD) method, we study the spectral characteristics of a waveguide-coupled ring carved in two-dimensional photonic crystal of square lattice (2D SLPC) and based on the results, we suitably modify the structure geometry to establish its performance as a ring resonator. We further investigate the effects of ring dimension and crystal parameters on the resonance properties of the ring resonator.     

Multi-channel drop filters using photonic crystal ring resonators

In this paper, we propose a photonic crystal multi-channel drop filter based on ring resonators and investigate its properties numerically by using the finite-difference time-domain (FDTD) method. This structure is constructed in a two-dimensional square lattice. Our multi-channel drop filter is composed of three waveguides and three ring resonators. These ring resonators are located in two different regions (heterostructure) which each region has specific dielectric constant. At resonance of each ring resonator, the power with certain wavelength transferred to one of the three drop waveguides is found to be more than 81%.     

谐振腔马赫-曾德尔干涉集成光波导陀螺

研究了光学环形腔中的单方向传输光在光学谐振腔中传输的情况，在系统旋转角速率变化时光束会产生频移，在此基础上，设计出一种具有谐振腔马赫-曾德尔干涉集成光波导陀螺结构，可以方便地检测出系统旋转角速率与方向，其检测精度与光波导谐振腔的品质无关。和萨尼亚克集成光波导陀螺相比较，性能价格比有进一步提高的潜力。     

Tunable plasmonic filter with circular metal–insulator– metal ring resonator containing double narrow gaps

Tunable filter based on two metal–insulator–metal (MIM) waveguides coupled to each other by a ring resonator with double narrow gaps is designed and numerically investigated by finite-difference time-domain (FDTD) simulations. The propagating modes of surface plasmon polaritons (SPPs) are studied. By introducing narrow gaps in ring resonators, the transmission in different resonance modes can be effectively adjusted by changing the gap width (g), and the transmitted peak wavelength has a nonlinear relationship with g. Another structure consisting two cascading ring resonators and regular MIM waveguide have also been proposed. The mechanism based on circular ring resonators with narrow gaps may provide a novel method for designing all-optical integrated components in optical communication and computing.     

X-两环结构的光学特性研究

提出了一种X-两环的金属周期性阵列结构,该结构由两个同心圆环包围中心X型构成.利用时域有限差分算法研究了该结构的光学特性.计算表明,当光入射到金属表面时,能够在结构中产生法诺共振现象,并在不同的位置下产生共振谷.同时,共振谷的出现又明显依赖于结构的相对参数(X的臂长、内外环的距离、内外环宽度、周期、环数、X所呈的角度),从而可以通过调节结构的相对参数来实现对结构的共振强度及共振谷位置的调控.另外,进一步分析了在不同环境折射率条件下该结构共振谷的变化规律,可以得出该结构也对周围的环境折射率有着较高的敏感度,最高可达1300 nm/RIU.结果表明,该结构在环境折射率传感器及某些光子器件的应用方面有着潜在的价值.     

宽带光子晶体插分滤波器

 通过使用正方格介质柱二维光子晶体设计了带有环形谐振器的一种插分滤波器ADF(add drop filter)结构,该结构具有1个输入端口和2个输出端口,采用时域有限差分法研究了带有1个环形谐振器和2个环形谐振器的ADF结构传输性能。结果表明：该ADF结构在第三通信窗口具有优良的滤波作用,能够根据需要将电磁波信号沿着波导向前后上下4个方向传输,ADF结构还具有可调性开关波长、宽频带、高传输率等特点,在光子晶体集成化、光器件制作等方面具有潜在价值。     

Design and analysis of electroabsorptive quantum well based double ring resonators for wavelength switching applications

We propose and present the design and analysis of a new double ring resonator structure for switching applications. The structure is based on the use of quantum wells that act as the active light guiding medium. The proposed ring resonator structure can be turned on or off by varying the absorption in the rings through external applied voltages. The absorption spectra are calculated for various quantum well designs using a simple model to predict the switching characteristics of double ring resonator structure. Simulation results show that amount of switching is a strong function of absorption, and is critically dependent on quantum well parameters and the applied electric field.     

空芯光子带隙光纤纤芯-包层交界面的设计

利用平面波展开法计算了圆六边形空气孔按三角形排列的光子晶体带隙,基于带隙图设计了移去7根玻璃毛细管形成纤芯、传输波长λ=1.55 μm的空芯光子带隙光纤的结构参量.随后利用全矢量有限元法计算了所设计的在纤芯-包层交界面处引入石英环的光纤,给出了在不同半径情况下沿z轴方向的光强分布、光强等高线分布图和损耗随引入石英环相对厚度的变化曲线.得出了光纤消除表面模、减小损耗的纤芯外半径取值范围为1.55Λ～1.7Λ,石英环的相对厚度取值范围为1.3～1.5或3.4～3.8.通过分析发现石英环的引入既可以抑制表面模也可以激发表面模,抑制还是激发有赖于纤芯外半径和石英环厚度的选择.     

Characteristics of Add Drop Filter using single and dual PCRR in square lattice

A Photonic Crystal Ring Resonator (PCRR) based Add Drop Filter is designed using two dimensional (2D) square lattice PC silicon rods in air host. The normalized transmission spectra for a single-ring and dual-ring configurations have been investigated using 2D Finite Difference Time Domain (FDTD). The filter characteristics such as coupling efficiency, dropping efficiency, resonant wavelength and Q factor are numerically analyzed for single ring and dual ring PCRR. It is noted that the coupling efficiency, dropping efficiency and Q factor of single ring circular PCRR with scatterer rod are 100%, 100% and 186.75, respectively. The backward dropping is observed in single ring PCRR whereas forward dropping are noticed in dual ring PCRR based ADF. The Photonic Band Gap (PBG) with respect to structural parameters such as the radius of the rod, lattice constant and refractive index difference, and propagation modes in periodic and nonperiodic structure are calculated by Plane Wave Expansion (PWE) method.     

Heterostructure wavelength division demultiplexers using photonic crystal ring resonators

In this paper, we demonstrate a new type of two-dimensional photonic crystal wavelength division demultiplexers based on ring resonators that can be applicable to photonic integrated circuits. The proposed structure mechanism is performed based on coupling between a waveguide and a ring resonator. Based on the calculated position, this structure is designed and verified by finite-difference time-domain computation; our simulation by using this method results over 82% output efficiency. We use a heterostructure which is constructed of three different values of dielectric constant to obtain our wavelength division demultiplexer.     

Terahertz wave switch based on photonic crystal ring resonators

In this paper, we have presented a compact and integrated terahertz wave switch design based on photonic crystal ring resonators. The photonic crystal structure with square lattice is investigated and applied for design of ring resonators. The switching mechanism of this novel switch is based on the variation of the resonant frequency of the ring resonator inserted between two parallel waveguides. The refractive index of the holes of the structure filled with polyaniline electrorheological fluids are varied by applied external electric field, the result of which is the variation of the ring resonant frequency. The proposed device is analyzed by using finite difference time domain method. Numerical simulation results show that this switch has high extinction ratio, small size, low voltage and advantages of selectivity of coupling THz wave to different output ports.     

(TiO2)12量子环及过渡金属化合物掺杂对其电子性质影响的密度泛函理论研究

本文采用第一性原理中基于密度泛函理论(DFT)的广义梯度近似(GGA)方法, 设计了一种新的(TiO₂)₁₂ 量子环结构, 研究了它的几何结构、平均结合能及电子云分布等属性. 在此新型结构的基础上, 分别采用过渡金属化合物MoS₂, MoSe₂, MoTe₂, WS₂, WSe₂和WTe₂进行掺杂, 并分析了掺杂后体系的几何结构及电子属性(如平均结合能、能级结构、HOMO-LUMO轨道电子云密度分布和电子态密度等). 计算结果表明: (TiO₂)₁₂量子环直径为1.059 nm, 呈中心对称分布, 且所有原子组成一个二维平面结构, 使其几何结构比较稳定, 另外该量子环HOMO-LUMO轨道电子云分布均匀, 且能隙为3.17 eV, 与半导体材料TiO₂晶体的能隙的实验值(3.2 eV)非常接近. 掺杂后量子环的能隙均大幅减小, 其中WTe₂的掺杂结果能隙最小, 仅为0.61 eV, MoTe₂的掺杂结果能隙最大, 为1.16 eV, 也比掺杂前减小约2.0 eV. 其他掺杂结果的能隙都在1 eV左右, 变化不大. 这个能隙的TiO₂可以利用大部分的太阳光能, 使TiO₂具有更为广泛的应用.     

基于半导体光放大器的非归零信号时钟恢复

提出了一种基于半导体光放大器加窄带光纤光栅滤波器，将非归零信号转换为伪归零信号，再把伪归零信号注入到主动锁模环行腔激光器进行时钟提取的非归零信号时钟恢复方案.利用该方案实现了10 Gb/s伪随机非归零信号的全光时钟恢复，对工作原理和结果进行了分析和讨论.实验证明该方案具有结构简单，调整容易，输出波形好的特点.     

Magnetoresistance dependence on electrical contact geometry and field alignment in mesoscopic rectangular rings

We investigate the magnetoresistance (MR) responses in a ferromagnetic rectangular ring structure using a four-point probe technique. The measured MR curves are strongly dependent on the electrical contact geometries used. The associated MR characteristics are elucidated by a combination of micromagnetic simulations and resistor-network based model, and the MR contributions from different portions of the ring were studied quantitatively. The systematic angular MR measured at the ring corner further show that the locations of the domain wall nucleation are very sensitive to the field alignment.     

表面等离子体环形共振器的滤波性质

利用时域有限差分法研究了基于金属-绝缘体-金属结构的环形波导共振器的滤波特性.研究结果表明,环形波导中存在多个共振模式.共振波长受环形波导的内径调制,随着环形波导内径的增加共振波长发生红移.共振带宽受耦合距离调制,随着耦合距离的增加带宽显著地减小.     

Realization of tunable optical filter by photonic crystal ring resonators

We have designed a tunable two dimensional (2D) channel drop filter (CDF) based on photonic crystal ring resonators (PCRR). Dropping efficiency and Q factor of single improved ring are 100% and 842, respectively. In this filter the quality factor is significantly improved with respect to other published reports. We investigate parameters which have an effect on resonant wavelength in this CDF, such as dielectric constant of inner, coupling, adjacent and whole rods of the structure and radius of inner rods. The transmission spectrum for our proposed configuration has been investigated using the 2D finite difference time domain (FDTD) method. The area of the proposed structure is about 117 μm².     

Preliminary study of EEHG-based superradiant undulator radiation at the HLS-Ⅱ storage ring

We investigate storage ring-based Echo-Enabled Harmonic Generation(EEHG) superradiant undulator radiation as a possible scheme to obtain shorter wavelengths at the HLS-Ⅱ(Hefei Light Source-Ⅱ) storage ring. In this paper we give the designation of the storage ring based EEHG up to the 26 th harmonic, where 31 nm vacuum ultraviolet light is radiated from an 800 nm seeded laser. The novelty of our design is that both the two dispersion sections of EEHG are realized by the storage ring's own magnet structure. In particular, the whole ring is used as the first dispersion section, and two modulators of the traditional EEHG can be done with the same undulator. These two dispersion sections are realized by changing the superperiod of the present lattice structure, and more precisely by changing the focusing strengths of the present structure. Since no additional magnets and chicanes are used,the beam circulates around the storage ring repeatedly, and thus this storage ring-based EEHG can have a higher repetition rate than a linac-based EEHG.     

A new design of tunable four-port wavelength demultiplexer by photonic crystal ring resonators

A four-channel wavelength demultiplexer based on photonic crystal ring resonators (PCRR), which can be used for photonic integrated circuits, is designed. Dropping efficiency and Q factor of single improved ring are 100% and 842, respectively. In order to achieve the structure of demultiplexer, three improved rings have been used, that every ring has an individual inner rod radius; it means that each ring has a varying resonant wavelength. The results of simulation using finite-difference time-domain (FDTD) method in our proposed structure reveals an average transmitted power higher than 90% for each output port, Channel spacing is about 8 nm and bandwidth for each individual channel is about 2.8 nm. The mean value of the crosstalk between output channels and the area of the proposed structure are about −29 dB and 317 μm², respectively. By changing the radius of inner rods, various wavelengths can be chosen, therefore this device is tunable.