Spectrofluorimetric and Spectrophotometric Stability‐Indicating Methods for the Analysis of Veralipride in Presence of Its Degradants and in Spiked Human Plasma

Spectrofluorimetric and spectrophotometric stability‐indicating methods were developed and validated for analysis of veralipride (Ver) in presence of its hydrolytic and oxidative degradants. The spectrofluorimetric method was based on direct measurement of the intrinsic fluorescence of Ver at 366 nm after excitation at 299 nm using sodium lauryl sulfate (SLS) as micelle enhancer. The fluorescence intensity plot was linear over the concentration range 1.0–10.0 µg·mL^?1. The high sensitivity of the method allowed its successful application to the analysis of Ver in spiked human plasma. Two other methods were developed. They are based on the oxidative coupling reaction of Ver with 3‐methyl benzothiazolin‐2‐one hydrazone (MBTH) hydrochloride in presence of ceric ammonium sulphate in an acidic medium. The first method depends on spectrophotometric measurement of the stable green colored oxidative coupling product at 660 nm. The different experimental parameters affecting the reaction were optimized. Linearity range is 10.0–100.0 µg·mL^?1. The second method depends on a fluorescence quenching effect of Ver on the fluorescence of Ce³⁺. The difference in fluorescence intensity was measured at 380 nm after excitation at 300 nm. This method is applicable over the concentration ranges 0.25–2.50 µg·mL^?1. The methods were validated according to the ICH guidelines. They were successfully applied for the analysis of Ver in drug substance, drug product and in laboratory prepared mixtures containing different percentages of hydrolytic and oxidative degradants.     

钯（II）-克林霉素-卤代荧光素体系的共振瑞丽散射光谱及其分析应用

在pH为5.0-5.4的乙酸-乙酸钠缓冲溶液中,克林霉素（Clin）与钯(Ⅱ)形成螯合阳离子,它能进一步与二碘荧光素（DIF）,赤藓红（Ery）,曙红Y（EY）等卤代荧光素类染料反应形成1：1：1的三元离子缔合物,此时将引起吸收光谱变化和荧光猝灭,同时还导致共振瑞利散射(RRS)的急剧增强并产生新的RRS光谱,钯(Ⅱ)-克林霉素与DIF,Ery和EY形成产物的最大散射波长分别位于285,287,32 1nm处,另外还有些较弱的散射峰存在。散射增强（ΔI）与克林霉素浓度在一定范围内成正比,可用于克林霉素的定量测定。对于DIF,Ery和EY体系的线性范围和检出限分别为0.025-2.1μg•mL-1和7.8 ng•mL-1,0.053-2.4μg•mL-1和16.0 ng•mL-1;以及0.038-2.4μg•mL-1和11.0 ng•mL-1。本文研究了适宜的反应条件,考察了共存物质的影响,表明方法有较好的选择性,基于三元离子缔合物的RRS光谱,发展了一种高灵敏、简便快速测定克林霉素的新方法。文中还对离子缔合物的组成,结构和反应机理,以及离子缔合物对吸收,荧光和RRS光谱的影响进行了讨论。     

Determination of Potassium Ferrocyanide in Foods by Resonance Rayleigh Scattering Method with Double-Charged Triaminotriphenylmethane Dyes

In pH 1.0 acidic medium, double-charged triaminotriphenylmethane dyes such as methyl green （MEG） and iodine green （IG） react with potassium ferrocyanide to form 2 ： 1 ion-association complexes by virtue of electrostatic forces and hydrophobic interaction. It results in the change of absorption and the great enhancement of resonance Rayleigh scattering （RRS） and the appearance of new RRS spectra. Two systems have similar spectral characteristics and their maximum RRS wavelengths are all located at 276 nm and smaller peaks are located at 332 and 457 nm, respectively. The intensity of RRS is directly proportional to the concentration of [Fe（CN）6]^4- in the range of 0.03-5.7 μg·mL^-1 （MeG system） or 0.04-5.9 μg·mL^-1 （IG system）. The RRS method has high sensitivity and the detection limit （3σ） for potassium ferrocyanide is 9.3 ng·mL^-1 （MeG system） or 11.2 ng·mL^-1 （IG system）. The optimum conditions, influencing factors and effects of foreign substances are investigated. The method also has a good selectivity. A sensitive, rapid and simple RRS method for the determination of potassium ferrocyanide in salinized food and table salt has been developed.     

Chemical composition and antibacterial activity of Tussilago farfara (L.) essential oil from Quebec,Canada

Abstract

The chemical composition of Tussilago farfara L. essential oil from the Saguenay-Lac-St-Jean region of Quebec, Canada was analyzed by gas chromatography–flame ionisation detector (GC-FID) and gas chromatography–mass spectrometry (GC-MS), and the antibacterial activity of the oil was tested against Escherichia coli and Staphylococcus aureus. Forty-five (45) compounds were identified from the GC profile. The main components were 1-nonene (40.1%), α-phellandrene (26.0%) and ρ-cymene (6.6%). The essential oil demonstrated antibacterial activity against E. coli (MIC₅₀ = 468 µg·mL^?1; MIC₉₀ = 6869 µg·mL^?1) and S. aureus (MIC₅₀ = 368 µg·mL^?1; MIC₉₀ = 773 µg·mL^?1). Dodecanoic acid was found to be active against both bacteria having a MIC₅₀ and MIC₉₀ of 16.4 µg·mL^?1 and 95 µg·mL^?1, respectively for E. coli and a MIC₅₀ and MIC₉₀ of 9.8 µg·mL^?1 and 27.3 µg·mL^?1, respectively for S. aureus. In addition, 1-decene and (E)-cyclodecene were also found to be active against E. coli.     

Study of Spectrophotometric Characteristics of the Charge Transfer Reaction of Aminomethylbenzoic Acid with 7,7,8,8‐Tetracyanoquinodimethane

A new spectrophotometric method was developed for the determination of aminomethylbenzoic acid (PAMBA) using 7,7,8,8‐tetracyanoquinodimethane (TCNQ). The method was based on the formation of charge transfer (CT) complex of this drug as n‐electron donor with the π‐acceptor TCNQ. TCNQ was found to react with PAMBA to produce a kind of yellow complex. The CT reaction proceeded quantitatively in pH 8.5 buffer solution. Different variables affecting the reaction were carefully studied and optimized. Under optimal reaction conditions, the stoichiometric ratio of the reaction, maximum absorption wavelength and the value of molar absorptivity were measured to be 1:1, 425 nm, and 1.9×10⁴ L·mol^?1·cm^?1, respectively. Beer′s law was obeyed in the range of 1–9 µg·mL^?1 of PAMBA. The data have been filled to a linear regression equation A=?0.2612+0.1123c (µg·mL^?1), with a correlation coefficient of 0.9996. The detection limit was 0.4 µg·mL^?1, R.S.D. was less than 1.9%, and average recovery was over 97.6%. The formation of the CT complex was also confirmed by both infrared and ¹H NMR measurements. The thermodynamic property, kinetic property and reaction mechanism have also been discussed. The method developed was applied successfully to the determination of the subject drug in its pharmaceutical dosage forms with good precision and accuracy compared to official method revealed by t‐ and F‐tests.     

Spectroscopy studies of sandwich-type complex of silver(I) co-ordinated to nuclear fast red and adenine and its analytical applications

A novel fluorometric method for the determination of adenine was proposed, based on the fluorescence quenching of a nuclear fast red-silver complex as a small molecule optical probe in the presence of adenine. The characteristic spectra of absorption, resonance Rayleigh scattering (RRS) and the fluorescence of the system were analysed. Adenine, Ag⁺ and nuclear fast red formed a sandwich-type complex. The composition of the compound and the mechanisms of fluorescence quenching were discussed. The optimal conditions for the reaction and the effects of co-existing substances were also investigated. The quenched fluorescence intensity was proportional to the concentration of adenine in the range of 0.03–0.90 µg mL^?1, with the limit of detection of 0.023 µg mL^?1. The method was applied satisfactorily to the determination of adenine in synthetic samples, herring sperm DNA, human sera and vitamin B₄ tablets with recoveries from 95.3 % to 105 %.     

N-bromosuccinimide-fluorescein system for the determination of protein by flow injection chemiluminescence

A method for flow injection with chemiluminescence (CL) detection has been developed for the determination of proteins. It is based on the luminescence of the N-bromosuccinimide-fluorescein-protein system, where fluorescein is used as an energy transfer reagent in alkaline medium. The CL of the system is strongly enhanced by hexadecyl trimethyl ammonium bromide. Optimum conditions and possible mechanisms have been investigated. Under optimum experimental conditions, the linear range is from 0.4 to 40 µg·mL^?1 for egg albumin, 0.2 to 20 µg·mL^?1 for bovine serum albumin, and from 1 to 100 µg·mL^?1 for bovine hemoglobin. The detection limits are 37, 62, and 240 ng·mL^?1, respectively.     

Second‐order Scattering and Frequency Doubling Scattering Spectra of Thallium(III)‐Methotrexate System and Its Analytical Application

In pH 4.9 Britton-Robinson buffer solution, methotrexate (MTX) reacted with thallium(III) to form a 3∶1 chelate. This resulted in great enhancement of second-order scattering (SOS) spectra and frequency doubling scattering (FDS) spectra and appearance of new SOS and FDS spectra. Their maximum wavelengths were located at 520 and 390 nm, respectively. The increments of scattering intensities (ΔI) were directly proportional to the concentrations of MTX in the ranges of 0.022—2.0 μg•mL－1 (SOS method) and 0.008—2.5 μg•mL－1 (FDS method). The methods exhibited high sensitivities. The detection limits for MTX were 7.4 ng•mL－1 (SOS method) and 2.3 ng•mL－1 (FDS method), respectively. The optimum conditions of the reaction, the influencing factors and the effects of coexisting substances were investigated. A highly sensitive, simple and fast method for the determination of MTX has been developed. The method can be applied satisfactorily to the determination of MTX in human serum samples. In this work, the charge distribution of MTX was calculated by a CNDO quantum chemistry method. In addition, the reaction mechanism was discussed.     

Determination of Rifampicin by Peroxomonosulfate‐Cobalt(II) Chemiluminescence System

Rifampicin can enhance the chemiluminescence (CL) of peroxomonosulfate‐cobalt(II) system, and the CL intensity is strongly dependent on the rifampicin concentrations. Based on this phenomenon, a rapid and sensitive flow injection CL method was developed for the determination of rifampicin. The relative CL intensity was linear with the rifampicin concentration over the range of 5×10^?8 to 1×10^?6 g·mL^?1 (r=0.9991), the detection limit was 7×10^?9 g·mL^?1 (S/N=3), and the relative standard deviation was 2.7% for 6×10^?7 g·mL^?1 rifampicin (n=11). Furthermore, this method was successfully applied to the determination of rifampicin in real eye drop and capsules sample.     

Determination of Poisonous Trace Element Thallium(I) by Kinetic Catalytic Reaction

Abstract

A effective and simple determination of poisonous trace element thallium(I) by means of kinetic catalytic reaction is proposed. The method is based on a catalytic effect of thallium(I) on a luminol-hydrogen peroxide system. Three different kinds of surfactants, cetrimonium bromide (CTMAB), sodium dodecyl sulphate (SDS), and Tween-80, are also investigated to improve the detection sensitivity. In optimum conditions, a highly selective and sensitive method for detecting trace thallium(I) has been established. The detection limit is 0.0073 µg · mL^?1, the relative standard deviation for six determinations of 0.04 µg · mL^?1 thallium(I) is less than 4.0%, and the linear range of determination is 0.02–0.1 µg · mL^?1.     

Determination of Albumin Using CdS/SiO2 Core/shell Nanoparticles as Fluorescence Probes

CdS quantum dots (QD) were capped with SiO₂ via a microemulsion method for reducing the toxicity and imparting the biocompatibility of the CdS QD. The resulting CdS/SiO₂ core/shell nanoparticles (NP) showed an improved water‐solubility and stability even in pH 4.0 acidic medium. Their fluorescence could be effectively enhanced in the presence of bovine serum albumin (BSA), due to the passivation effect of BSA on the surface of the NP. Furthermore, the concentration dependence of the fluorescence intensity obeys the Langmuir‐type binding isotherm. Thus a novel fluorescence enhancement method for the determination of BSA has been developed using the less‐toxic CdS/SiO₂ core/shell NP as probes. Under optimal conditions, the linear range of calibration curve is 0.6–30 µg·mL^?1, and the detection limit is 0.18 µg·mL^?1. Compared with the water‐soluble CdS NP without SiO₂ shell, the CdS/SiO₂ core/shell NP exhibited slightly lower fluorescence response to BSA as well as other coexisting substances, such as heavy and transition metals, due to the inhibition of SiO₂ shell. The proposed method was applied to the quantification of BSA in synthetic and serum samples with satisfactory results.     

Voltammetric Determination of Rosiglitazone in Pharmaceutical Preparations and Human Plasma

Abstract

The voltammetric behavior of rosiglitazone was studied using direct current (DC_t), differential pulse (DPP), and alternating current (AC_t) polarography. The drug manifests cathodic waves over a pH range of 2–11.2. In Britton‐Robinson buffer (BRb; pH 4), the diffusion current–concentration relationship was found to be rectilinear over a range of 4–24 µg · mL^?1 and 0.1–16 µg · mL^?1 using DC_t and DPP modes, respectively, with minimum limits of detection (LOD) of 0.15 µg · mL^?1 and 0.07 µg · mL^?1 using the DC_t and DDP modes, respectively. The diffusion‐current constant (I _d) was 6.63±0.03 (n=5). The proposed method was successfully applied to the determination of the studied compound both in pure form and in formulations. The mean percentage recoveries in tablets were 100.09±1.18 and 100.85±0.88 (n=5) using DC_t and DPP modes, respectively. Furthermore, the proposed method, adopting the DPP mode, was applied to the determination of rosiglitazone in spiked human plasma and the obtained mean percentage recoveries were 99.14±3.29 (n=4).     

Determination of L‐Cystine by a New Sensitive Cucurbit[7]uril/palmatine Probe

In the presence of cucurbit[7]uril (CB[7]), the CB[7] could react with palmatine, which served as a sensitive fluorescence probe, to form host‐guest stable complexes and the fluorescence intensity of the complexes was greatly enhanced. The fluorescence intensity decreased linearly with an increasing number of L‐cystine in the inclusion system. The experimental results show that there exists a competition between L‐cystine and palmatine for the CB[7] hydrophobic cavity and L‐cystine occupies the space of CB[7] cavity, leading palmatine molecules to be forced to reside in the aqueous environment. Based on the fluorescence quenching of the CB[7]/palmatine complexes resulting from complex formation between CB[7] and L‐cystine, a spectrofluorimetric method for the determination of L‐cystine in aqueous solution in the presence of CB[7] was developed. The linear relationship between the corresponding values of the fluorescence quenching ΔF and L‐cystine concentration was obtained in the range of 6.0 to 1.5×10³ ng·mL^?1, with a correlation coefficient (r) of 0.9996. The detection limit was 2.0 ng·mL^?1. The application of the present method to the determination of L‐cystine in tablets gave satisfactory results. This paper also discussed the mechanism of the fluorescence indicator probe.     

A novel chemiluminescence reaction system for the determination of lincomycin with diperiodatonickelate(IV)

A sensitive and high selective chemiluminescence (CL) method was developed for the determination of lincomycin in acid medium using diperiodatonickelate as a reagent. The mechanism leading to luminescence is discussed by comparing the spectra of fluorescence and CL. Relative CL intensity is linear in the range from 8.0 ng mL^?1 to 1.0 µg mL^?1, the limit of detection is 2.5 ng mL^?1 (3σ), and the relative standard deviation is 4.0% at 0.1 µg mL^?1 of lincomycin (n?=?7). The method was successfully applied to the determination of lincomycin in injections, human urine, and in serum samples.     

Study on the Supramolecular Interaction of β-Cyclodextrin with Gemfibrozil by Spectrofluorimetry and Its Analytical Application

The supramolecular interaction of gemfibrozil with β-cyclodextrin （β-CD） was studied by spectrofluorimetry. The mechanism of the inclusion was discussed by spectrofluoremetry, infrared spectrum and ^1H NMR spectrum. The results showed that a 1 ： 1 （β-CD ： gemfibrozil） complex was formed with an apparent association constant of 3.844 × 10^3 L·mol^-1. Based on the enhancement of the fluorescent intensity of gemfibrozil, a spectrofluorimetric method for the determination of gemfibrozil in bulk aqueous solution in the presence of β-CD was developed. The linear range was 3.30 ng·mL^- 1 -6.00 ug·mL^-1 with the detection limit of 0.980 ng·mL^-1. There was no interference from the excipients normally used in tablet composition and the serum main compositions. The proposed method was then successfully applied to the determination of gemfibrozil in capsules and serum.     

Extractive Spectrophotometric Determination of Fluconazole by Ion-pair Complex Formation with Bromocresol Green

An extraction-spectrophotometric method for the determination of trace amounts of fluconazole was described. Fluconazole was effectively extracted as a 1 ： 1 ion-pair complex with bromocresole green （BCG） at pH 3.0 into chloroform, followed by spectrophotometric determination at 420 nm. Beer＇s law was obeyed over the range of 4-50 μg.mL^-1 of fluconazole with a detection limit of 3.7 μg.mL^-1 . The method is simple, rapid and sensitive. The procedure was applied to the determination of fluconazole in pharmaceutical preparations as well as its recovery from a blood serum sample.     

Determination of Vitamin A in Infant Milk-Based Formulas and Pharmaceutical Formulations Using Flow Injection with Ce(IV)–Na2SO3 Chemiluminescence Detection

A rapid and simple flow injection (FI) method is reported for the determination of vitamin A (retinol) based on its strong enhancing effect on the Ce(IV)–Na₂SO₃ chemiluminescence (CL) reaction in an acidic solution. The effect of key chemical and physical parameters (i.e., reagent concentrations, flow rate, and sample volume) was optimized and potential interferences examined. Under the selected experimental conditions, a linear calibration was obtained between the CL intensity and vitamin A concentration in the range 0.1–8.0 µg mL^?1 (r ²  = 0.9986, n = 8). The limit of detection (3 s x blank) was 0.01 µg mL^?1 retinol (n = 6) and the relative standard deviation (RSD) for 0.25 µg mL^?1 retinol was 2.3% (n = 10) with a sampling rate of 180 h^?1. The method was successfully applied to infant milk-based formulas and pharmaceutical formulations and the results were not significantly different at 95% confidence interval with those obtained by using a spectrophotometric reference method. The possible CL mechanism is also discussed briefly supporting with UV-visible, fluorescence, and CL spectra.     

A Novel Method for the Determination of Streptomycin Using Sodium Nitroprusside as a Chromogenic Reagent by Spectrophotometry

Abstract

A rapid and simple spectrophotometric method for the determination of streptomycin has been developed and validated. The method was based on the reaction of streptomycin with sodium nitroprusside in the alkaline medium forming a red product measured at the maximum absorption of 495 nm. The stoichiometric ratio of the product is 1:1. Beer's law is obeyed in a range of 1.87 µg mL^?1 ～ 279.8 µg mL^?1 of streptomycin and ?₄₉₅ is 6.0 × 10³ L·mol^?1 cm^?1.Under the optimum condition, the equation of linear regression is A = 0.00742 + 0.05683 C (× 10⁵ mol·L^?1), with a linear correlation coefficient of 0.9990. The detection limit (3σ/k) is 0.96 µg mL^?1, the relative standard deviation (RSD) is 2.40%, and the average recovery rate is 98.3%–102.7%. Every parameter has been optimized, and the reaction mechanism has been studied. The proposed method has been successfully applied to the determination of streptomycin for injections and tablets of pharmaceutical preparation. Analytical results obtained by this new method were very gratifying.     

A Spectrophotometric Study of Streptomycin Effect on the Clinical Urea Determination

The results of studying inhibitory effect of streptomycin on the modified Berthelot reaction were presented in this paper and a new kinetic method for determining streptomycin in pharmaceutical preparations and human urine was developed on the basis of the obtained results. The rates of catalytic and catalytic‐inhibitory reaction were monitored at 700 nm (t=25±0.1°C) using UV/vis spectrophotometer. By analyzing the spectra and experimental dependences of the catalytic and catalytic‐inhibitory reaction rates on the reactant concentrations, it was noticed that streptomycin attacked nitroprusside and hypochlorite causing the inhibition of the production of 2,2′‐dicarboxylindophenol. According to this effect, an analytical decrease for determination of urea by modified Berthelot reaction appeared in the presence of small amounts of streptomycin. Beer's law was obeyed in the interval of streptomycin sulfate concentration from 18.2 to 182 µg·mL^?1. The detection limit calculated by two methods was obtained at 11.75 µg·mL^?1 and 8.54 µg·mL^?1. The relative standard deviation of 0.55%–8.83% and the recovery of 109.10% were determined. The obtained results were validated using the referent HPLC method.