The confirmation of accurate combination of functional and basis set for transition‐metal dimers: Fe2, Co2, Ni2, Ru2, Rh2, Pd2, Os2, Ir2, and Pt2

Eight kinds of density functionals named B3LYP, PBE1PBE, B1B95, BLYP, BP86, G96PW91, mPWPW91, and SVWN along with two different valence basis sets (LANL2DZ and CEP‐121g) are employed to study the transition‐metal dimers for the elements of group VIII. By comparing the equilibrium bond distances, vibrational frequencies, and dissociation energies of the ground state of these dimers with the available experimental values and theoretical data, we show that the “pure” DFT methods (G96PW91, BLYP, and BP86) with great‐gradient approximation always give better results relative to the hybrid HF/DFT schemes (B3LYP, PBE1PBE, and B1B95). The striking case found by us is that the G96PW91 functional, which is not tested in previous systemic studies, always predicts the dissociation energy to be well. The Ru₂ and Os₂ dimers are sensitive to not only the functionals employed but also the valence basis sets adopted. The natural bond orbital population is analyzed, and the molecular orbitals of the unpaired electrons are determined. Furthermore, our results indicate that the s and d orbitals of these dimers always hybridize with each other except for Rh₂ and Pt₂ molecules. And by analyzing the electron configuration of the bonding atom, the dissociation limit of the ground state is obtained. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

FT-IR and FT-Raman, UV spectroscopic investigation of 1-bromo-3-fluorobenzene using DFT (B3LYP, B3PW91 and MPW91PW91) calculations

The FT-IR and FT-Raman spectra of 1-bromo-3-fluorobenzene (C₆H₄FBr) molecule have been recorded using Bruker IFS 66 V spectrometer in the range of 4000–100 cm⁻¹. The molecular geometry and vibrational frequencies in the ground state are calculated using the DFT (B3LYP, B3PW91 and MPW91PW91) methods with 6-31++G(d,p) and 6-311++G(d,p) basis sets. The computed values of frequencies are scaled using a suitable scale factor to yield good coherence with the observed values. The isotropic DFT (B3LYP, B3PW91 and MPW1PW91) analysis showed good agreement with the experimental observations. Comparison of the fundamental vibrational frequencies with calculated results by B3LYP methods. The complete data of this molecule provide the information for future development of substituted benzene. The influence of bromine and fluorine atom on the geometry of benzene and its normal modes of vibrations has also been discussed. A study on the electronic properties, such as absorption wavelengths, excitation energy, dipole moment and frontier molecular orbital energies, was performed by time dependent DFT (TD-DFT) approach. The electronic structure and the assignment of the absorption bands in the electronic spectra of steady compounds were discussed. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. On the basis of the thermodynamic properties of the title compound at different temperatures have been calculated in gas phase, revealing the correlations between standard heat capacities (C) standard entropies (S), standard enthalpy changes (H) and temperatures.     

Molecular structure and vibrational investigation of benzenesulfonic acid methyl ester using DFT (LSDA, B3LYP, B3PW91 and MPW1PW91) theory calculations

The FT-Raman and FT-IR spectra for benzenesulfonic acid methyl ester (BSAME) have been recorded in the region 4000-100 cm(-1) and compared with the harmonic vibrational frequencies calculated using DFT (LSDA, B3LYP, B3PW91 and MPW1PW91) method by employing 6-311G (d, p) basis set with appropriate scale factors. IR intensities and Raman activities are also calculated by DFT (LSDA, B3LYP, B3PW91 and MPW1PW91) methods. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values for sulfonic acid and some substituted sulfonic acids. The experimental geometrical parameters show satisfactory agreement with the theoretical prediction from DFT. The scaled vibrational frequencies at LSDA/B3LYP/6-311G (d, p) seem to coincide with the experimentally observed values with acceptable deviations. The theoretical spectrograms (IR and Raman) have been constructed and compared with the experimental FT-IR and FT-Raman spectra. Some of the vibrational frequencies of the sulfonic acid are effected upon profusely with the methyl substitution in comparison to benzene sulfonamide and these differences are interpreted.     

Electron affinities of metals computed by density functional theory and ab initio methods

An extensive computational study of the meal electron affinity was performed using the ab initio and density functional theory (DFT) methods. HF, MP2, MP3, MP4, QCISD, and QCISD(T) was used as computational methods, while the hybrid, local, and nonlocal DFT methods with the LYP, P86, PW91, and VWN correlation functionals were used. Two basis sets, one small and applicable to almost all metals (LanL2DZ) and one large [6-311 + + G(3df, 3 pd)] used only for small metals, were employed. The computed results were compared with the experimental data and the capabilities of the DFT methods to perform this study were discussed. © 1997 John Wiley & Sons, Inc.     

Mechanistic insights into triterpene synthesis from quantum mechanical calculations. Detection of systematic errors in B3LYP cyclization energies

Most quantum mechanical studies of triterpene synthesis have been done on small models. We calculated mPW1PW91/6-311+G(2d,p)//B3LYP/6-31G* energies for many C30H51O+ intermediates to establish the first comprehensive energy profiles for the cationic cyclization of oxidosqualene to lanosterol, lupeol, and hopen-3beta-ol. Differences among these 3 profiles were attributed to ring strain, steric effects, and proton affinity. Modest activation energy barriers and the ample exothermicity of most annulations indicated that the cationic intermediates rarely need enzymatic stabilization. The course of reaction is guided by hyperconjugation of the carbocationic 2p orbital with parallel C-C and C-H bonds. Hyperconjugation for cations with a horizontal 2p orbital (in the plane of the ABCD ring system) leads to annulation and ring expansion. If the 2p orbital becomes vertical, hyperconjugation fosters 1,2-methyl and hydride shifts. Transition states leading to rings D and E were bridged cyclopropane/carbonium ions, which allow ring expansion/annulation to bypass formation of undesirable anti-Markovnikov cations. Similar bridged species are also involved in many cation rearrangements. Our calculations revealed systematic errors in DFT cyclization energies. A spectacular example was the B3LYP/6-311+G(2d,p)//B3LYP/6-31G* prediction of endothermicity for the strongly exothermic cyclization of squalene to hopene. DFT cyclization energies for the 6-311+G(2d,p) basis set ranged from reasonable accuracy (mPW1PW91, TPSSh with 25% HF exchange) to underestimation (B3LYP, HCTH, TPSS, O3LYP) or overestimation (MP2, MPW1K, PBE1PBE). Despite minor inaccuracies, B3LYP/6-31G* geometries usually gave credible mPW1PW91 single-point energies. Nevertheless, DFT energies should be used cautiously until broadly reliable methods are established.     

Comparison of aromatic NH···π, OH···π, and CH···π interactions of alanine using MP2, CCSD, and DFT methods

A comparison of the performance of various density functional methods including long‐range corrected and dispersion corrected methods [MPW1PW91, B3LYP, B3PW91, B97‐D, B1B95, MPWB1K, M06‐2X, SVWN5, ωB97XD, long‐range correction (LC)‐ωPBE, and CAM‐B3LYP using 6‐31+G(d,p) basis set] in the study of CH···π, OH···π, and NH···π interactions were done using weak complexes of neutral (A) and cationic (A⁺) forms of alanine with benzene by taking the Møller–Plesset (MP2)/6‐31+G(d,p) results as the reference. Further, the binding energies of the neutral alanine–benzene complexes were assessed at coupled cluster (CCSD)/6‐31G(d,p) method. Analysis of the molecular geometries and interaction energies at density functional theory (DFT), MP2, CCSD methods and CCSD(T) single point level reveal that MP2 is the best overall performer for noncovalent interactions giving accuracy close to CCSD method. MPWB1K fared better in interaction energy calculations than other DFT methods. In the case of M06‐2X, SVWN5, and the dispersion corrected B97‐D, the interaction energies are significantly overrated for neutral systems compared to other methods. However, for cationic systems, B97‐D yields structures and interaction energies similar to MP2 and MPWB1K methods. Among the long‐range corrected methods, LC‐ωPBE and CAM‐B3LYP methods show close agreement with MP2 values while ωB97XD energies are notably higher than MP2 values. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010     

DFT studies of the phosphinidene derivative HPNaF and its insertion reaction with R–H(R=F,OH, NH<Subscript>2</Subscript>, CH<Subscript>3</Subscript>)

The formations of the phosphinidene derivative HPNaF and its insertion reactions with R–H (R=F, OH, NH₂, CH₃) have been systematically investigated employing the density functional theory (DFT), such as the B3LYP and MPW1PW91 methods. A comparison with the results of MP2 calculations shows that MPW1PW91 underestimates the barrier heights for the four reactions considered. Similarly, the same is also true for the B3LYP method depending on the selected reactions, but by much less than MPW1PW91, where the barrier heights of the four reactions are 25.2, 85.7, 119.0, and 142.4 kJ/mol at the B3LYP/6-311+G* level of theory, respectively. All the mechanisms of the four reactions are identical to each other, i.e., an intermediate has been located during the insertion reaction. Then, the intermediate could dissociate to substituted phosphinidane(H₂RP) and NaF with a barrier corresponding to their respective dissociation energies. Correspondingly, the reaction energies for the four reactions are −92.2, −68.1, −57.2, and −44.3 kJ/mol at the B3LYP/6-311+G* level of theory, respectively, where both the B3LYP and MPW1PW91 methods underestimate the reaction energies compared with the MP2 results. The linear correlations between the calculated barrier heights and the reaction energies have also been observed. As a result, the relative reactivity among the four insertion reactions should be as follows: H–F > H–OH > H–NH₂ > H–CH₃.     

The performance of different density functional methods in the calculation of molecular structures and vibrational spectra of platinum(II) antitumor drugs: cisplatin and carboplatin

A comparison of eight density functional models for predicting the molecular structures, vibrational frequencies, infrared intensities, and Raman scattering activities of platinum(II) antitumor drugs, cisplatin and carboplatin, is reported. Methods examined include the pure density functional protocols (G96LYP, G96PW91, modified mPWPW and original PW91PW91), one‐parameter hybrid approaches (mPW1PW and mPW1LYP), and three‐parameter hybrid models (B3LYP and B3PW91), as well as the HF and MP2 levels of theory. Different effective core potentials (ECPs) and several basis sets are considered. The theoretical results are discussed and compared with the experimental data. It is remarkable that the mPW1PW protocol introduced by Adamo and Barone [J Chem Phys 1998, 108, 664], is clearly superior to all the remaining density functional methods (including B3LYP). The geometry and vibrational frequencies of cisplatin and carboplatin calculated with the mPW1PW method, and the ECP of Hay and Wadt (LanL2DZ basis set) are in better agreement with experiment than those obtained with the MP2 method. The use of more elaborated ECP and the enlargements of basis sets do not significantly improve the results. A clear‐cut assignments of the platinum‐ligand vibrations in cisplatin and carboplatin are presented. It is concluded that mPW1PW is the new reliable method, which can be used in predicting molecular structures and vibrational spectra of large coordination compounds containing platinum(II). © 2001 John Wiley & Sons, Inc. J Comput Chem 22: 901–912, 2001     

Comparison between optimized geometries and vibrational frequencies calculated by the DFT methods for the Anderson-type heteropolyanion: hexamolybdoaluminate(III), [AlIII(OH)6Mo6O18]3-

Optimized geometries and vibrational frequencies were calculated for the hexamolybdoaluminate(III), [AlIII(OH)6Mo6O18]3-, Anderson-type heteropolyanion with the HF, B3LYP, B3PW91, B3P86 and B1LYP methods of theory using the LanL2DZ, SDD and combination of LanL2DZ with 6-31G (d, p) basis sets. The agreement between the optimized and experimental geometries was in the decreasing order: HF, B3P86, B3PW91, B1LYP and B3LYP. The calculated frequencies by the B3LYP have the smallest mean root mean square (RMS) error. The effect of the basis set on the calculated bond lengths and frequencies by the density functional calculations (DFT) methods was minor. The agreement between the previously reported IR and Raman spectra and the calculated values is, in general, good.     

DFT study of the structural characteristics of the yttrium(3+) aqua ion

Density functional theory (DFT) using SVWN5, B3LYP, B3P86, O3LYP, B3PW91, B1LYP, B971, MPW1PW91, PBE1PBE, BHandH, and BHandHLYP density functionals was employed to study the structural characteristics of the Y(H₂O) ₈ ³⁺ yttrium aqua ion. The nonlocal hybrid GGA functionals show worse predictive ability in structural calculations of the Y(H₂O) ₈ ³⁺ aqua ion compared to the relatively simple combined functional BHandH and to the simplest SVWN5 functional in LSDA theory.     

Comparison of some representative density functional theory and wave function theory methods for the studies of amino acids

Energies of different conformers of 22 amino acid molecules and their protonated and deprotonated species were calculated by some density functional theory (DFT; SVWN, B3LYP, B3PW91, MPWB1K, BHandHLYP) and wave function theory (WFT; HF, MP2) methods with the 6-311++G(d,p) basis set to obtain the relative conformer energies, vertical electron detachment energies, deprotonation energies, and proton affinities. Taking the CCSD/6-311++G(d,p) results as the references, the performances of the tested DFT and WFT methods for amino acids with various intramolecular hydrogen bonds were determined. The BHandHLYP method was the best overall performer among the tested DFT methods, and its accuracy was even better than that of the more expensive MP2 method. The computational dependencies of the five DFT methods and the HF and MP2 methods on the basis sets were further examined with the 6-31G(d,p), 6-311++G(d,p), aug-cc-pVDZ, 6-311++G(2df,p), and aug-cc-pVTZ basis sets. The differences between the small and large basis set results have decreased quickly for the hybrid generalized gradient approximation (GGA) methods. The basis set convergence of the MP2 results has been, however, very slow. Considering both the cost and the accuracy, the BHandHLYP functional with the 6-311++G(d,p) basis set is the best choice for the amino acid systems that are rich in hydrogen bonds.     

A mixed experimental and theoretical study on chelidamate copper(II) complex with 4-methylpyrimidine

A new chelidamate complex, [Cu(chel)(H₂O)₂(mpd)] (chel = chelidamate; mpd = 4-methylpyrimidine), has been synthesized and characterized through a combination of single crystal X-ray analysis, electron paramagnetic resonance (EPR), ultraviolet-visible (UV-vis), and fourier transform infrared spectroscopy (FT-IR). The complex has six-coordinate distorted octahedral geometry around Cu(II). The theoretical vibrational frequencies and optimized geometric parameters (bond lengths and angles) have been calculated using Density Functional Theory (DFT)/B3LYP and Hartree Fock quantum chemical methods with 6-31G(d, p) basis set by Gaussian 09W software. The EPR spectrum of the compound showed that the paramagnetic center has rhombic symmetry. The EPR studies were carried out using the following unrestricted hybrid density functionals: B3LYP, CAM-B3LYP, HSEH1PBE, WB97XD, MPW1PW91, and BPV86. The UV–vis absorption spectra have been examined in different media and compared with the calculated one using TD-DFT method by applying the polarizable continuum model. Natural bond orbital property of complex has been performed by DFT/B3LYP with 6-31G (d, p) basis set.     

Calculations of solid‐state 43Ca NMR parameters: A comparison of periodic and cluster approaches and an evaluation of DFT functionals

We present a computational study of magnetic‐shielding and quadrupolar‐coupling tensors of ⁴³Ca sites in crystalline solids. A comparison between periodic and cluster‐based approaches for modeling solid‐state interactions demonstrates that cluster‐based approaches are suitable for predicting ⁴³Ca NMR parameters. Several model chemistries, including Hartree–Fock theory and 17 DFT approximations (SVWN, CA‐PZ, PBE, PBE0, PW91, B3PW91, rPBE, PBEsol, WC, PKZB, BMK, M06‐L, M06, M06‐2X, M06‐HF, TPSS, and TPSSh), are evaluated for the prediction of ⁴³Ca NMR parameters. Convergence of NMR parameters with respect to basis sets of the form cc‐pVXZ (X = D, T, Q) is also evaluated. All DFT methods lead to substantial, and frequently systematic, overestimations of experimental chemical shifts. Hartree–Fock calculations outperform all DFT methods for the prediction of ⁴³Ca chemical‐shift tensors. © 2017 Wiley Periodicals, Inc.     

Vibrational investigation, molecular orbital studies and molecular electrostatic potential map analysis on 3-chlorobenzoic acid using hybrid computational calculations

The FT-IR and FT-Raman spectra of 3-chlorobenzoic acid (3CBA) are recorded in the liquid state. The fundamental vibrational frequencies, intensity of vibrational bands and the optimized geometrical parameters of the compound are evaluated using HF and DFT (LSDA/B3LYP/B3PW91/MPW1PW91) methods with 6-311+G(d,p) basis set. The theoretical wave numbers are scaled down and compared with the experimental values which showed very good agreement. Comparison of stimulated spectra with the experimental spectra provides important information about the ability of the hybrid computational method to describe the vibrational modes. The HOMO, LUMO, chemical hardness (η), chemical potential (μ), electrophilicity values (ω) and maximum amount of electronic charge transfer (ΔN(max)) are calculated. The molecular electrostatic potential (MESP) is calculated and the corresponding graphs are drawn. Some thermodynamic parameters and physico-chemical properties are calculated and discussed.     

What are the spectroscopic properties of HFC‐32? Answers from DFT

Although coupled cluster theory coupled to large basis sets can reach impressive accuracies for thermochemical and spectroscopic properties, it is still limited to small/medium sized molecules. Density functional theory (DFT) represents the working option for systems composed of hundreds to thousands heavy atoms. In this context, investigations are required aimed at characterizing the performances of the different density functionals (DF). This work focuses on the study of DFT performances in the prediction of spectroscopic properties, with particular attention to the vibrational problem, by focusing on the CH₂F₂ molecule as a test case. An extensive and systematic investigation is performed on several DFT model chemistries by testing their predictions of molecular constants and vibrational frequencies and intensities against CCSD(T)/aug‐cc‐pCVQZ data. B3LYP, B3PW91, B97‐1, PBE0, TPSSh, M05, M05‐2X, and B2PLYP DFs are used in conjunction with a variety of basis sets. Anharmonic frequencies are derived from the VPT2 treatment of anharmonic‐ and hybrid CCSD(T)/DFT‐force fields. A software for VPT2 computations is also presented. © 2014 Wiley Periodicals, Inc.     

A DFT conformational analysis and VCD study on methyl tetrahydrofuran-2-carboxylate

DFT calculations were performed on (S)-methyl tetrahydrofuran-2-carboxylate to facilitate the interpretation of IR and VCD spectra. The potential energy surface could not be described unambiguously using the 6-31G* basis set in combination with different density functionals including B1LYP, B3LYP, B3P86, B3PW91, B98, BHandH, BHandHLYP, MPW1PW91 and PBE1PBE. In contrast, a uniform conformational picture could be found using the cc-pVTZ basis set. Using this large basis set and the collection of nine functionals from above, the dipole and rotational strengths were calculated, and compared to experimental values which were extracted from the experimental IR and VCD spectra for (+)-(S)-methyl tetrahydrofuran-2-carboxylate. A detailed analysis on the agreement between experiment and simulated spectra was performed by assigning the experimental bands based on the harmonic fundamentals obtained for all functionals except BHandH, which performs badly over the whole line. Assessing the dipole strengths, all tested functionals perform equally well. For the rotational strengths, differences can be observed: B3LYP, B1LYP and B98 give the highest correlation with experiment, while PBE1PBE gives the lowest correlation. Comparable conclusions are obtained using a neighborhood similarity measure.     

Nickel-catalyzed alkyl coupling reactions: evaluation of computational methods

The B3LYP, M06, M06L, M062X, MPW1K, and PBE1PBE DFT methods were evaluated for modeling nickel-catalyzed coupling reactions. The reaction consists of a nucleophilic attack by a carbanion equivalent on the nickel complex, S(N)2 attack by the anionic nickel complex on an alkyl halide, and reductive elimination of the coupled alkane product, regenerating the nickel catalyst. On the basis of CCSD(T)//DFT single-point energies, the B3LYP, M06, and PBE1PBE functionals were judged to generate the best ground state geometries. M06 energies are generally comparable or superior to B3LYP and PBE1PBE energies for transition state calculations. The MP2 and CCSD methods were also evaluated for single-point energies at the M06 geometries. The rate-determining step of this reaction was found to be nucleophilic attack of a L(2)NiR anion on the alkyl halide.