Spectral assignments to the light emissions of fluorescent organic small molecules in aqueous medium

Spectrofluorometric identifications of artificial organic dyes have important environmental significance, but both scattered light signals and the fluorescence signals were twins in fluorospectroscopy, and the light scattering signals are always the interference sources of spectrofluorometry. In order to investigate the relationship between the light scattering and fluorescence in the spectrofluorometric measurements, herein we discuss the scattered light and fluorescence emission properties of organic small molecules (OSMs) using Lignin Pink (LP) in neutral medium as an example. With the help of UV-vis measurements, and starting from three-dimensional light emission measurements, scattered light and fluorescence emissions could be assigned. Investigations by increasing LP concentration showed that the light emission at 282.0 and 344.0 nm could be attributed to the resonance light scattering (RLS) signals and that at 420.0 and 570.0 nm are composed of both RLS and fluorescence emissions, respectively. UV-vis measurements showed that LP does not have the tendency of aggregation, and the strong RLS signals should be ascribed to the large hydrodynamic diameter of LP itself in aqueous medium, supported by dynamic light scattering (DLS) measurements.     

Dilute solution properties of poly(dimethyldiallylammonium chloride) in aqueous sodium chloride solutions

MW fractions of poly(dimethyldiallylammonium chloride) (PDMDAAC) were prepared by preparative size-exclusion chromatography and characterized by static and dynamic light scattering, viscometry, size-exclusion chromatography, and electrophoretic light scattering, in 0.50M NaCl solution. The behavior of fractions with MW < 2 × 10⁵ was as expected for a strong polyelectrolyte in a good solvent, with a Mark-Houwink exponent of ca. 0.8, and MW-dependencies of the hydrodynamic radius and the radius of gyration of corresponding magnitude. At higher MW, curvature appears in the MW-dependencies, which can be best explained by the presence of branching. While this notably lowers the intrinsic viscosity at high MW, the electrophoretic mobility is unchanged regardless of molar mass. Thus, the branched polymers display the electrophoretic free-draining behavior characteristic of linear polyelectrolytes. ©1995 John Wiley & Sons, Inc.     

Study on the phosphorescence characterizations of palmatine chloride on the solid substrate and its interaction with ctDNA

The spectroscopic characterizations of solid substrate room temperature phosphorescence (SS-RTP) of palmatine (Pal) have been studied. Strong RTP signal at 615 nm can be induced on filter paper in the presence of TIAc. The interaction between calf thymus DNA (ctDNA) and Pal has been investigated at pH 6.90 using fluorescence, UV-vis, SS-RTP and cyclic voltammogram spectroscopy. Strong binding affinity of Pal with DNA is revealed from the absorption and fluorescence studies in the liquid state. With the addition of ctDNA, the fluorescence intensity of Pal is enhanced greatly and UV-vis spectra show no apparent hypochromicity and red shift, which indicates that Pal intercalates into ctDNA bases. However, this conclusion could not explain the phenomena from fluorescence polarization and denatured DNA measurements, which indicate that groove binding is at least the main binding mode. Binding constant and binding site size have been calculated to be 2.57 × 10⁴ L/mol and 0.16 based on Scatchard plot from fluorescence titration data. Groove binding has also been supported by phosphorescence lifetime and anion quenching experiments. Above studies demonstrate that there should exist intercalative binding and groove binding in the interaction of Pal and DNA. Furthermore, cyclic voltammogram study suggests that electrostatic binding exists at the same time exactly. Taken together, the binding model obtained in this study is mixed-mode.     

An rhodamine-based fluorescence probe for iron(III) ion determination in aqueous solution

An “off-on” rhodamine-based fluorescence probe for the selective signaling of Fe(III) has been designed exploiting the guest-induced structure transform mechanism. This system shows a sharp Fe(III)-selective fluorescence enhancement response in 100% aqueous system under physiological pH value and possesses high selectivity against the background of environmentally and biologically relevant metal ions including Al(III), Cd(II), Fe(II), Co(II), Cu(II), Ni(II), Zn(II), Mg(II), Ba(II), Pb(II), Na(I), and K(I). Under optimum conditions, the fluorescence intensity enhancement of this system is linearly proportional to Fe(III) concentration from 6.0 × 10⁻⁸ to 7.2 × 10⁻⁶ mol L⁻¹ with a detection limit of 1.4 × 10⁻⁸ mol L⁻¹.     

Modification of guanosine with cyanopropargylic alcohols

Guanosine has been modified with tertiary cyanopropargylic alcohols under mild conditions (1:1.1–2 molar ratio, K₂CO₃, DMF, 20–25 °C, 19–50 h) to simultaneously give two modifications. The first product (1:1 adduct) is formed by the stereoselective addition of the amide function of the purine ring to the triple bond (38–43% yields), and the second product is the 1:2 adduct, with a second molecule of cyanopropargylic alcohol having reacted with the two vicinal hydroxy groups of the ribose moiety to give a functionalized 1,3-dioxolane ring (29–50% yields).     

p-Dimethylaminobenzaldehyde thiosemicarbazone: a simple novel selective and sensitive fluorescent sensor for mercury(II) in aqueous solution

A novel and simple fluorophore, p-dimethylaminobenzaldehyde thiosemicarbazone (DMABTS), was prepared in order to find available fluorescent chemosensor for mercuric ion in aquesous solution. DMABTS emitted fluorescence at 448 nm in aqueous solution and its fluorescence intensity was completely quenched upon interaction with Hg²⁺ ions, which should be attributed to the 1:1 complex formation between DMABTS and Hg²⁺. The binding constant of the complex was determined as 7.48 × 10⁶ mol l⁻¹. The linear range of quantitative detection of 0 to 5.77 × 10⁻⁶ mol l⁻¹ and the detection limit of 7.7 × 10⁻⁷ mol l⁻¹ for Hg²⁺ in the 6.3 × 10⁻⁶ mol l⁻¹ DMABTS aqueous solution were obtained from a calibration curve. The coexistence of several transition metal ions and anions did interfere the fluorometric titration of Hg²⁺ ion by less than 4% in the emission change.     

Structure determination of zinc iodide complexes formed in aqueous solution

Structures of the complexes formed in aqueous solutions between zinc(II) and iodide ions have been determined from large-angle X-ray scattering, Raman and far-IR measurements. The coordination in the hydrated Zn²⁺ hexaaqua ion and the first iodide complex, [ZnI]⁺, is octahedral, but is changed into tetrahedral in the higher complexes, [ZnI₂(H₂O)₂], [ZnI₃(H₂O)]^– and [ZnI₄]^2–. The Zn-I bond length is 2.635(4)Å in the [ZnI₄]^2– ion and slightly shorter, 2.592(6)Å, in the two lower tetrahedral complexes. In the octahedral [ZnI(H₂O)₅]⁺ complex the Zn-I bond length is 2.90(1)Å. The Zn-O bonding distances in the complexes are approximately the same as that in the hydrated Zn²⁺ ion, 2.10(1)Å.     

Interaction of tin (IV) chloride with sulfolane and between tin (IV) chloride and lithium chloride in sulfolane solution

Tin (IV) chloride reacts with sulfolane (S) to form a cis-octahedral adduct SnCl₄·S₂. Solutions of lithium chloride and tin (IV) chloride in sulfolane contain the complex ions SnCl ₅ ^– and SnCl ₆ ^2– at 11 and 21 mole ratios of constituents, respectively. The complexes are characterized by conductimetry and by Mössbauer, IR, and Raman spectroscopy.     

Highly sensitive fluorescence detection of chloride ion in aqueous solution with Ag-modified porous g-C3N4 nanosheets

The porous g-C₃N₄ (PCN) nanosheets are successfully synthesized and further modified with nano-sized Ag by a simple wet-chemical process. Interestingly, the Ag-modified porous g-C₃N₄ (Ag-PCN) nanosheets exhibit competitive fluorescence detection performance of chloride ion (Cl⁻) in aqueous solution. Under the optimized conditions, the concentration of Cl⁻ could be quantitative analyzed with the Ag-PCN in a wide detection range from 0.5 mmol/L to 0.1 mol/L, with a low detection limitation of 0.06 mmol/L. It is confirmed that the fluorescence of PCN could be effectively decayed by the photoinduced charge transfer via the adsorbed Cl⁻ for trapping holes, mainly by means of the time-resolved fluorescence and surface photovoltage spectra. The porous structure and modified Ag promote the adsorption of Cl⁻ on resulting Ag-PCN, leading to excellent fluorescence detection for Cl⁻. This work provides a feasible route to develop a fluorescence detection of Cl⁻ with g-C₃N₄ nanosheets in environment water.     

Self-organization of guanosine 5'-monophosphate on mica

Self-assembled aggregates of guanosine 5′-monophosphate (GMP) on the surface of muscovite mica were investigated by atomic force microscopy (AFM). Aqueous solutions of sodium, potassium and ammonium GMP salts were studied. For solution concentrations c < 0.005 wt% only small islands of deposited material are present on the surface. For c  0.02 wt%, in addition to the islands and patches, also linear aggregates called G-wires are formed. The wire-like aggregates are on average 1.9 nm high and can be several micrometers long. They exhibit a profound directional growth along the six main crystallographic axes of the basal plane of mica. For c > 0.1 wt% flat terraces with the height of 2.5 nm appear. They are formed of G-wires lying with their long axis parallel to the substrate and stacking in a hexagonal arrangement. The morphology of the adsorbates is independent of the type of salt used to prepare the initial solution. This signifies that intrinsic potassium ions from the substrate play much more important role in the GMP adsorption than cations from the solution.     

Spectral studies of the interaction between sanguinarine and guanosine

The interaction between sanguinarine and guanosine was investigated by using UV-vis and fluorescence spectra at pH 7.2. The binding of sanguinarine to guanosine was substantiated by the hypochromism and bathochromism in the absorption spectra and the emission quenching in fluorescence spectra. The fluorescence lifetime results, the varieties of the fluorophore absorption spectra and the decrease of the binding constant with the increasing temperature all indicate that the fluorescence quenching is static. The ratio and constant of the binding cytidine to sanguinarine are 2 and 6.44 × 10^7, respectively. The result shows that the binding of sanguinarine to guanosine is not only exothermic but also entropy-driven with △H=-8.53kJ/mol, AS = 0.12 kJ/（molK）, and AG =-44.57 kJ/mol at 298.15 K.     

Sonoluminescence of aqueous solution of gadolinium chloride

A line of the Gd^III ion was detected at 311 nm in the multibubble sonoluminescence spectrum of a concentrated (1 mol L⁻¹) solution of gadolinium chloride. A comparison with the earlier studied sonoluminescence of the Ce^III and Tb^III ions shows that the Gd^III ion is excited in the volume and/or on the surface of cavitation bubbles upon collisions with “hot” particles. The efficiency of excitation of the lanthanide ions via this mechanism depends on the type of electron transition. For the same energy of the excited state, the efficiency of Gd^III excitation (f-f transition) exceeds by at least 50 times that of Ce^III excitation (f-d transition). Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1341–1344, June, 2005.     

Structure and dynamics of the CrIII ion in aqueous solution: Ab initio QM/MM molecular dynamics simulation

Structural and dynamical properties of the Cr(III) ion in aqueous solution have been investigated using a combined ab initio quantum mechanical/molecular mechanical (QM/MM) molecular dynamics simulation. The hydration structure of Cr(III) was determined in terms of radial distribution functions, coordination numbers, and angular distributions. The QM/MM simulation gives coordination numbers of 6 and 15.4 for the first and second hydration shell, respectively. The first hydration shell is kinetically very inert but by no means rigid and variations of the first hydration shell geometry lead to distinct splitting in the vibrational spectra of Cr(H(2)O)(6) (3+). A mean residence time of 22 ps was obtained for water ligands residing in the second hydration shell, which is remarkably shorter than the experimentally estimated value. The hydration energy of -1108 +/- 7 kcal/mol, obtained from the QM/MM simulation, corresponds well to the experimental hydration enthalpy value.     

Modeling the mechanism of hydrolysis of cyclic guanosine monophosphates in aqueous solution

Equilibrium geometric configurations and the corresponding energies of the reagents and products of hydrolysis of cyclic guanosine monophosphate (c-GMP) and diguanosine monophosphate (c-di-GMP) in aqueous solution were calculated using the combined quantum mechanical and molecular mechanical (QM/MM) method.     

双十八烷基二甲基氯化铵水溶液CMC值的测定

采用电导法和荧光法测定了阳离子表面活性剂-双十八烷基二甲基氯化铵(DODAC)的临界胶束浓度(CMC), 在温度为14 ℃时, 电导法测得DODAC溶液的临界胶束浓度为5.24×10-5 mol/L, 荧光法测得DODAC溶液的临界胶束浓度为9.67×10-5 mol/L.     

Acid-base properties of poly(1-vinylazoles) in aqueous solution

The interaction of poly(1-vinylimidazole) and poly(1-vinyl-1,2,4-triazole) with HCl and alkalies in aqueous and water-salt solutions was investigated by potentiometric titration, viscosimetry, ¹H and ¹³C NMR, and UV spectroscopy. The effect of the nature and concentration of low-molecular counterions was found. The interaction of poly(1-vinylazoles) with the acid results in the protonation of the azole cycle. The interaction of poly(1-vinylazoles) with alkalies is stipulated by the capability of the pyridine N atom of forming a coordination bond with the metal ion and that of the unsaturated pi-system of the heterocycle of coordinating with the anions.     

Diffusion and structure of nickel chloride in aqueous solution

Diffusion experiments are reported for Ni and Cl ions in an aqueous solution of NiCl₂. The markedly lower mobility of Ni is consistent with a hydration cloud, but the higher mobility of Cl ions establishes that Ni and Cl ions are not closely correlated (e.g. they are not strongly bound into a complex). For both ions, curvature in log D versus 1/T plots is found indicating that even for Ni, where neutron results indicate ordering over substantial distances, hopping via the sites of a super-lattice would be an oversimplification. In the light of this evidence, new calculations have been made of the X-ray scattering intensity. No model built on short-range ordering of Ni complexes can explain the data. Rather, one must consider the Ni ions fitted into the water structure. Assuming that the Cl ions scatter incoherently, and without considering Ni-H₂O correlations, a model emerges which accounts for all the main peaks in the X-ray intensity out to 3.5 A^?1. Finally, some discussion is given of the influence of Ni-H₂O correlations. In wavenumber space, it is argued that provided two or more hydration shells, which arise from fitting Ni into the water structure, are included, no prominent new peaks in the X-ray intensity inside 3.5 A^?1 occur.     

Ferric borate formation in aqueous solution

Potentiometric analyses indicate that previous investigations have overestimated the stability of ferric borate complexes. The FeB(OH) ₄ ²⁺ formation constant result obtained in the present work is_Bβ ₁ ^* = [FeB(OH) ₄ ²⁺ ][H⁺][Fe³⁺]^-1[B(OH)₃]^-1 = (5.4±0.3) x 10^-3 at 25.0°C and 0.7 molal ionic strength. Our result indicates that solution concentrations of FeOH²⁺ and FeB(OH) ₄ ²⁺ are approximately equal in aqueous solution for boric acid concentrations on the order of 0.3 molal. Fe(B(OH)₄) ₂ ⁺ is a minor species in solution compared to FeB(OH)₄ ²⁺ for conditions such that [B(OH)₃][H⁺]^-1≤ 350, and ferric borate complexation is insignificant in solutions such as seawater where [B(OH)₃] ≤ 4× 10^-4 molal.     

Colorimetric and fluorescent detection of biological thiols in aqueous solution

A new colorimetric and fluorescent probe,2-(2,4-dinitrostyryl)-1,3,3-trimethyl-3H-indolium iodide (DTI),for selective and sensitive detection of biological thiols is reported.In aqueous solution at physiological pH 7.4,biological thiols react with DTI via Michael addition to give the brownish red adduct concomitant with fluorescence emission decrease.