Kinetics and mechanism of osmium(VIII)-catalyzed oxidation of 1,4-thioxane by alkaline hexacyanoferrate(III)

The kinetics of oxidation of 1,4-thioxane (1,4-oxathiane) by alkaline K₃Fe(CN)₆ have been studied in the presence of Os^VIII as catalyst. The reaction is first order in hexacyanoferrate(III) and Os^VIII. The order in thioxane and OH^– is zero. While added salts and ethanol have a negligible effect on the oxidation rate, K₄Fe(CN)₆ retards it. On the basis of kinetic evidence, a mechanism has been proposed.     

Kinetics and mechanism of metal ion catalysis: Part I. Kinetics of electron transfer from cycloheptanone in aqueous alkali

The kinetics of the electron transfer from cycloheptanone to OsO₄ in alkaline medium has been studied spectrophotometrically. The oxidation of cycloheptanone by Os^VIII, continuously regenerated by Fe(CN)^3– ₆ in alkaline medium in the 0.00123–0.01 M range, is zeroth order with respect to Fe(CN)^3– ₆ and first order with respect to Os^VIII. A suitable mechanism, based on rate data analysis, is proposed.     

Kinetics and mechanism of metal ion catalysis: Part II. Oxidation of PhCHO by osmium(VIII) continuously regenerated by hexacyanoferrate(III) ions

The kinetics of the oxidation of PhCHO by Os^VIII has been studied in 0.01–0.05 M [OH^–] range. Fe(CN)^3– ₆ was used to regenerate Os^VIII. The very low solubility of PhCHO in H₂O restricted the study to the 0.0024–0.0036 M [PhCHO] range. A mechanism involving the PhCHO hydrate has been proposed.     

Kinetics and mechanism of metal ion catalysis. Part III. Osmium(VIII) catalysed oxidation of m-hydroxybenzaldehyde by Fe(CN)6 3− in alkaline medium

Os^VIII-catalysed oxidation of m-hydroxybenzaldehyde by alkaline Fe(CN)₆ ^3– has been studied in the 0.01–0.05 M [OH^–] range. Higher [OH^–] concentrations were not possible as the substrate turned yellow at [OH^–] > 0.05 M. The very low solubility of the substrate in H₂O restricted the kinetic study to [OH^–] < 0.01 M. A mechanism, consistent with the results is proposed.     

Preparation of57Fe enriched K4[Fe(CN)6] and K3[Fe(CN)6]

A simple method to prepare⁵⁷Fe enriched K₄[Fe(CN)₆] and K₃[Fe(CN)₆] is described. The yields of the products are much better than those reported in the literature so far. The enrichment is essential for⁵⁷Fe Mössbauer investigation in a variety of Prussiate type complexes and other inorganic compounds which are conveniently prepared from K₄[Fe(CN)₆] and K₃[Fe(CN)₆]. K₄[Fe(CN)₆] was obtained by reacting freshly prepared Fe(OH)₃ with glacial acetic acid and treating with iron acetate in boiling aqueous solution of KCN. The novel feature of the procedure to obtain K₃[Fe(CN)₆] is that the oxidation of K₄[Fe(CN)₆] has been carried out in the solid state by passing chlorine gas over the powdered specimen. K₃[Fe(CN)₆] was crystallised from alkaline solution of this oxidised powder. The compounds were characterised by Mössbauer spectroscopy.     

Osmium(VIII)/palladium(II) catalysis of cerium(IV) oxidation of allyl alcohol in aqueous acid

Summary Catalysis of the Ce^IV-allyl alcohol (AA) reaction in acid solution depends both on the of rate enhancement and product distribution on the catalyst used: Os^VIII results mainly in acrolein, whereas Pd^II gives acrylic acid. The rate laws in the two cases also differ:viz., Equations 1 and 2K₁ is the equilibrium constant of formation of the Os^VIII-allyl alcohol complex and k₁ is the rate constant of its oxidation by Ce^IV; K₂ is the equilibrium constant for the formation of the Ce^IV-Pd^II-allyl alcohol complex and k₂ is its rate constant of decomposition. Rate = K₁k₁[Ce^IV][AA][Os^VIII]/(1+K₁[AA]) (1) Rate = K₁k₁[Ce^IV][Pd^II]/(1+K₂[Ce^IV]) (2)While Os^VIII is effective in H₂SO₄ solution, aqueous HClO₄ is needed for Pd^II. Both reactions proceed through formation of catalyst-allyl alcohol complexes with participation of free radicals. The details of these observations are discussed.     

Determination of Riboflavin Using Flow Injection Inhibitory Chemiluminescence

ABSTRACT

A new flow injection method for the determination of riboflavin based on the inhibition of the intensity of chemiluminescence (CL) from the luminol-K₃Fe(CN)₆ system is described. While riboflavin mixed with K₃Fe(CN)₆, by the fast oxidation reaction between riboflavin and K₃Fe(CN)₆, K₄Fe(CN)₆ was generated, which then inhibited the CL reaction of K₃Fe(CN)₆ and luminol in alkaline aqueous solution. The CL emission was correlated with the riboflavin concentration in the range from 0.032 to 100 μg·ml?¹, and the detection limit was 0.01 μg·ml?¹ (3σ). A complete analysis could be performed in 2 min with a relative standard deviation of less than 2.2%. The influence of foreign species was studied and the method has been applied successfully to the determination of riboflavin in pharmaceutical samples, the recovery was from 98.0% to 102%.     

The Effect of Adsorption of Ions of the Hexacyanoferrate(II)/(III) Redox Pair on Self-Assembly of Octanethiol at Its Adsorption from Aqueous Solutions on Gold Electrode

The effect of components of the redox pair K₃[Fe(CN)₆]/K₄[Fe(CN)₆] on the dynamics of formation of octanethiol (OT) monolayers from aqueous thiol-containing solutions of 0.1 М NaClO₄ is studied by cyclic voltammetry (CVA). The formation of OT monolayers is shown to depend on the presence of ions of hexacyanoferrate(II)/(III) in solution. Being added to solution, the components of the [Fe(CN)₆]^3–/4– redox pair sharply increase the time of formation of the insulating monolayer OT films and make them less stable. The destabilizing and inhibiting action of [Fe(CN)₆]^3–/4– ions becomes stronger as their concentration in solution increases. The adsorption activity of individual components of the redox pair is assessed. The strong and approximately equal adsorption activity of ions [Fe(CN)₆]^3– and [Fe(CN)₆]^4– on gold in the presence of octanethiol is observed. At the same time, OT and the hexacyanoferrate(II)/(III) ions can be placed in the following row: OT > [Fe(CN)6]^3– ≈ [Fe(CN)₆]^4–. Recommendations are given on how to eliminate the interfering action of the K₃[Fe(CN)₆]/K₄[Fe(CN)₆] redox-pair ions when studying the insulating properties of thiol monolayers on gold.     

Ruthenium(III), osmium(VIII) and ruthenium(III) + osmium(VIII) catalysed oxidations ofi-propanol by N-bromosuccinimide in basic solution

Summary The oxidation ofi-propanol (IPA) by N-bromosuccinimide (NBS) in basic solution was investigated separately in the presence of Ru^III, Os^VIII and Ru^III + Os^VIII ions. The order in [IPA] was found to be 0.7, 0.5 and 0.3 respectively in the above three cases in the concentration range studied. The order in [NBS] was unity in the presence of Ru^III chloride but was found to be zero in the case of Os^VIII and Ru^III+Os^VIII catalysis. The order in [metalion] was found to be nearly unity in all the three catalysed reactions. Increase in [^–OH] increased the rate of reaction while addition of succinimide retarded the rate of reaction. Decrease in dielectric constantsof the medium decreased the rate of oxidation. The pseudo first order rate constants (k), zero order rate constants (k₀) and the formation constants (k_f) of the substrate-catalyst complexes and the thermodynamic parameters have been evaluated. Suitable mechanisms in conformity with the experimental observations have been proposed for the three catalysed reactions.     

Mechanisms involved in chemical vapor generation by aqueous tetrahydroborate(III) derivatization : Role of hexacyanoferrate(III) in plumbane generation

The role played by K₃Fe(CN)₆ (0.08 or 1.5 g l^− 1) in producing strong enhancement factors in the generation efficiency of plumbane in the reaction of NaBH₄ (10 or 40 g l^− 1) with Pb(II) (50 μg l^− 1) in 0.1 M HCl solution, was investigated by using continuous flow chemical vapor generation coupled with atomic fluorescence spectrometry (CF-CVG-AFS). Different mixing sequences and reaction times of reagents were tested using different chemifold setups. Part of CF-CVG-AFS experiments were performed using the on-line, delayed addition of Pb(II) to a K₃Fe(CN)₆ + NaBH₄ reaction mixture. Kinetic calculations estimating the concentration of K₃Fe(CN)₆ remaining in the K₃Fe(CN)₆ + NaBH₄ reaction mixture before it merged with Pb(II) solution were also performed. Batch experiments measuring the amount of hydrogen evolved (pressure of H₂ vs time) and pH variation during K₃Fe(CN)₆ + NaBH₄ + HCl reaction were performed in order to have a correct estimation of the concentration of K₃Fe(CN)₆ remaining in the reaction system. The comparison of CF-CVG-AFS experiments with kinetic calculations indicates that strong enhancement factors of plumbane generation can be obtained without any interaction of K₃Fe(CN)₆ with Pb(II). The key role of K₃Fe(CN)₆ is recognized in its reaction with NaBH₄ to give “special” borane complex intermediates, which are highly effective in the generation of plumbane from Pb(II).     

Conductance of aqueous solutions of cobalticyanides,ferrocyanides, and molybdocyanides of potassium and of tetraalkylammonium lons

The conductances of aqueous solutions of the above-mentioned compounds have been measured in the range of ionic strength between 5×10^?4–10^?1 at 25°C. The decrease in equivalent conductance due to the increase in concentration always becomes smaller with increasing molecular weight of the tetraalkylammonium ions. K₄Fe(CN)₆ is comparable to (Me₄N)₄Fe(CN)₆, K₄Mo(CN)₆ is intermediate between the tetraethyl- and the tetra-n-propylammonium salts, and K₃Co(CN)₆ has a conductance larger than the tetra-n-butylammonium salt. These results are compared with the kinetic salt effects due to the tetraalkylammonium ions.     

The silver(I)‐catalyzed exchange of coordinated cyanide in hexacyanoferrate(II) by phenylhydrazine in aqueous medium

The [Ag]⁺‐catalyzed exchange of coordinated cyanide in [Fe(CN)₆]^4? by phenylhydrazine (PhNHNH₂) has been studied spectrophotometrically at 488 nm by monitoring increase in the absorbance for the formation of cherry red colored complex [Fe(CN)₅PhNHNH₂]^3?. The other reaction conditions were pH 2.80±,0.02, temperature = 30.0 ± 0.1^°C, and ionic strength (I) = 0.02 M (KNO₃). The reaction was followed as a function of pH, ionic strength, temperature, [Fe(CN)^4?₆], [PhNHNH₂], [Ag⁺] by varying one variable at a time. The initial rates were evaluated for each variation using the plane mirror method. The initial rates evaluated as a function of [Fe(CN)^4?₆] clearly indicate that the initial rate increases with the increase in [Fe(CN)^4?₆] and finally reaches to a limiting value when [Fe(CN)^4?₆]/[AgNO₃] ? 1000. It indicates the formation of a strong adduct between [Fe(CN)₆]^4? and AgNO₃ prior to the abstraction of CN^?. The variation in initial rates with [PhNHNH₂] also showed limiting values at [Fe(CN)^4?₆]/[PhNHNH₂] ? 8.30. The complex behavior due to pH and [Ag⁺] variations on the rate has been explained in detail. The composition of the final reaction product [Fe(CN)₅PhNHNH₂] formed during the course of reaction has been found to be 1:1 using the mole ratio method. The evaluated values of activation parameters for the catalyzed reaction are E_a = 53.85 kJ mol^?1, Δ H^≠, = 51.33 kJ mol^?1, and Δ S^≠ = ?134.63 J K^?1 mol^?1, which suggest an interchange dissociative mechanism. A most plausible mechanistic scheme has been proposed based on the experimental observations. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 447–456, 2007     

Study on Effect and Catalytic Mechanism of the Catalysts for Coal Oxidation in Alkaline Medium

Coal electro‐oxidation in sodium hydroxide solution with catalysts, K₃Fe(CN)₆, sodium hypochlorite and supported FeS, were investigated, respectively. Gas produced from electro‐analysis of coal slurry was collected by drainage‐method and I‐t curves were recorded to testify the catalysis of each catalyst for coal oxidation. The results show that the three kinds of catalysts can obviously improve the coal oxidation current. Furthermore, K₃Fe(CN)₆ and sodium hypochlorite played an indirect oxidation role in the electrolysis process. Catalysts bridge the coal particles and the solid electrode surface, thus increase the coal oxidation rates. The changes of catalyst content during the electrolysis were further determined by quantitative titration to discuss the catalytic Mechanism. The dynamic transition of K₃Fe(CN)₆/K₄Fe(CN)₆ and ClO⁻/Cl⁻ are proposed by iodometric method.     

Kinetics and mechanisms of oxidation by metal ions. Part XIII. Osmium(VIII)-catalysed oxidation of cycloalkanols by alkaline hexacyanoferrate(III)

Summary The kinetics of OsO₄-catalysed oxidation of cyclopentanol, cyclohexanol and cyclooctanol by alkaline hexacyanoferrate(III) have been studied at low [OH^–] so that the equilibrium between alcohol and alkoxide ion is not unduly shifted towards the latter. The reaction shows a first-order dependence in [OH^–]. The order of the reaction with respect to cycloalcohol is fractional, indicating the formation of an intermediate complex with Os^VIII since the order with respect to hexacyanoferrate(III) ion is zero. The order with respect to Os^VIII may be expressed by the equation k_obs=a+b[Os^VIII]. The analysis of the rate data indicates a significant degree of complex formation between [OsO₃(OH)₃]^– and ROH. It was found that the bimolecular rate constant k for the redox reaction between complex and OH^–k₁, the forward rate constant for the formation of alkoxide ion. The activation parameters of these rate constants are reported.     

Elektrochemisches Verhalten von Redox-Systemen in Lösungsmittelgemischen, 2. Mitt.: Das System K4[Fe(CN)6]-K3[Fe(CN)6] in Fettsäure-Wasser-Gemischen

Zusammenfassung Es wurden die elektrochemischen Eigenschaften des Redox-Systems K₄[Fe(CN)₆]-K₃[Fe(CN)₆] in Ameisensäure-Wasser-, Essigsäure-Wasser-, Propionsäure-Wasser- und n-Buttersäure-Wasser-Gemischen untersucht. Die Veränderungen des Redoxpotentials, der Leitfähigkeit und der Dielektrizitäts-konstante wurden studiert.Es wurde bewiesen, daß die Potentialveränderung des Redox-Systems bei kleiner Säurekonzentration (n _s<0,6–0,7) vor allem durch die Wasserstoffionen-Konzentration der Lösung bestimmt wird. Mit der Zunahme der H⁺-Konzentration nimmt die Aktivität des [Fe(CN)₆]^4– in größerem Maße ab als die des [Fe(CN)₆]^3–.Bei großer Säurekonzentration beeinflußt dagegen hauptsächlich die Anionsolvatation durch das Lösungsmittelgemisch die Verschiebung des Redoxpotentials. Die Solvatation ruft eine Strukturveränderung hervor, wodurch die Elektronen-population der Lösungsmittelmoleküle in der Nähe der Cyanoferrat-Ionen abnimmt, die Elektronen-Acceptor-Wirkung des Lösungsmittels wächst. Dieser Prozeß bewirkt in bekannter Weise die Zunahme des Redoxpotentials.

---

The electrochemical behaviour of redox systems in mixed solvents, II.: TheK ₄[Fe(CN) ₆]-K ₃[Fe(CN) ₆] system in fatty acid-water mixtures

The electrochemical behaviour of the K₄[Fe(CN)₆]-K₃[Fe(CN)₆] system has been investigated in mixtures of water with formic, acetic, propionic and n-butyric acid, resp. The change of the redox potential, the conductivity and the dielectric constant has been studied. It has been proved that the change of the redox potential of the system at low acid concentration (n _s<0.6–0.7) is determined by the H⁺ concentration. Increasing the H⁺ concentration, the activity of the [Fe(CN)₆]^4– decreases in a higher extent than the activity of [Fe(CN)₆]^3–.On the other hand, at high acid concentration the shift in the redox potential is influenced first of all by the anion solvating effect of the solvent. The solvation causes such a change in the structure, that the electron population of the solvent molecules around the [Fe(CN)₆]^4– ions decreases, the acceptor strength of the solvent increases. It is well known that this process causes an increase in the redox potential.

---

---

Mit 7 Abbildungen     

A study of ion exchange selectivity coefficient by cyclic voltammetric measurement

An equation to express ion exchange selectivity coefficient was derived and used for calculating that of PPY film with the results obtained by cyclic voltammetric measurement. PPY film was synthesized by electrochemical method in aqueous solution using K₄Fe(CN)₆ as supporting electrolyte, and the anions were doped into the film. Ion exchange behaviour of doped Fe (CN)₆^3-/4- in the PPY film with Cl^?, NO₃^? or F^? ions in solution has been studied, and the corresponding ion exchange selectivity coefficients were determined.     

The kinetics and mechanism of oxidation of hexacyanoferrate(II) by periodate ion in highly alkaline aqueous medium

The oxidation of hexacyanoferrate(II) by periodate ion has been studied spectrophotometrically by registering an increase in absorbance at 420 nm (λ_max of yellow colored [Fe(CN)₆ ^3?] complex under pseudo first-order conditions by taking excess of [IO₄ ^?] over [Fe(CN)₆ ^4?]. The reaction conditions were: pH = 9.5 ± 0.02, I = 0.1 M (NaCl) and Temp. = 25 ± 0.1 °C. The reaction exhibited first-order dependence on each [IO₄ ^?] and [Fe(CN)₆ ^4?]. The effects of variations of pH, ionic strength and temperature were also studied. The experimental observations revealed that the periodate ion exists in its protonated forms viz. [H₂IO₆]^3? and [H₃IO₆]^2? while [Fe(CN)₆]^4? is present in its deprotonated form throughout the pH region selected for the present study. It has also been observed that deprotonated form of [Fe(CN)₆ ^4?] and protonated forms of periodate ion are the most reactive species towards oxidation of [Fe(CN)₆ ^4?]. The repetitive spectral scan is provided as an evidence to prove the conversion of [Fe(CN)₆ ^4?] to [Fe(CN)₆ ^3?] in the present reaction. The activation parameters have also been computed using the Eyring’s plot and found to be, ΔH? = 51.53 ± 0.06 kJ mol^?1, ΔS? = ?97.12 ± 1.57 J K^?1 mol^?1 and provided in support of a most plausible mechanistic scheme for the reaction under study.     

Improving the electrochemical performances of active carbon-based supercapacitors through the combination of introducing functional groups and using redox additive electrolyte

High-performance and low-cost electrochemical capacitors (ECs) are essential for large-scale applications in energy storage. In this work, the specific capacitance of active carbon (AC) electrode was significantly improved through the combination of introducing functional groups on the surface of AC and adding redox-active molecules (K₃Fe(CN)₆) into 2?M KOH aqueous electrolytes. The surface-oxygen functionalized AC (FAC) was synthesized using HNO₃ echoed as the electrode and 2?M KOH with 0.1?M K₃Fe(CN)₆ as the electrolyte. The surface functional groups of the AC not only contribute to the pseudocapacitance but also increase the active sites of the electrode/electrolyte interface, which enhances the electrochemical activity of the Fe(CN)₆^3?/Fe(CN)₆^4? redox pair, thus leading to high capacitance. In the redox electrolyte, the specific capacitance was much higher in 229.17?F?g^?1 (1?A?g^?1) achieved for those FAC than in raw AC (only 147.06?F?g^?1). Similarly, the FAC electrode suggested high energy density and extended cycling stability in the KOH?+?K₃Fe(CN)₆ electrolyte.     

Kinetics and mechanisms of oxidation by metalions. Part XI(1). Kinetics of the osmium(VIII)-catalysed oxidation of glycols by alkaline hexacyanoferrate(III)

Summary The kinetics of the Os^VIII-catalysed oxidation of glycols by alkaline hexacyanoferrate(III) ion exhibits zerothorder dependence in [Fe(CN) ₆ ^3– ] and first-order dependence in [OsO₄]. The order with respect to glycols is less than unity, whereas the rate dependence on [OH^–] is a combination of two rate constants; one independent of and the other first-order in [OH^–]. These observations are commensurate with a mechanism in which two complexes, [OsO₄(H₂O)G]^– and [OsO₄(OH)G]^2–, are formed either from [OsO₄(H₂O)(OH)]^– or [OsO₄(OH)₂]^2– and the glycol GH, or by [OsO₄(H₂O)₂] and [OsO₄(H₂O)(OH)]^– and the glycolate ion, G^–, which is in equilibrium with the glycol GH through the reaction between GH and OH^–. Hence there is an ambiguity about the true path for the formation of the two Os^VIII-glycol complexes. A reversal in the reactivity order of glycols in the two rate-determining steps, despite the common attack of OH^– ion on the two species of Os^VIII-complexes, indicates that the two complexes are structurally different because S changes from the negative (corresponding to k₁₁) to positive (related to k₂).     

Determination of the oxidant activity of chlorinated water by chronoamperometry

A new version of the chronoamperometric method, adapted to the determination of the oxidative (oxidant) activity of a medium on an example of chlorinated water, was proposed. The supporting solution contained K₄Fe(CN)₆. By its oxidation with oxidants present in the sample, K₃Fe(CN)₆ formed; its reduction current served as an analytical signal. The current of K₃Fe(CN)₆ reduction was recorded at a potential of 0 V, selected from the cyclic voltammogram of the K₃Fe(CN)₆/K₄Fe(CN)₆ system in the range where the oxidized form of the reagent was reduced and the reduced form was stable. A gold electrode was the measuring electrode. The possibility of using a stable solution of K₃Fe(CN)₆ as a component of a standard addition and as a solution for plotting a calibration curve was demonstrated. The limit of detection of the amount of dissolved chlorine and products of its interaction with water is 8 × 10^–6 M. The data obtained by the proposed procedure and by the iodometric methods correlate well with each other (r = 0.93–0.95). The proposed version of the chronoamperometric method can be used to monitor the amount of dissolved chlorine and products of its interaction with water in water supply systems, pools, and disinfecting solutions and to determine other water-soluble oxidants.