Fourier transform infrared imaging and microscopy studies of Pinus radiata pulps regarding the simultaneous saccharification and fermentation process

The distribution and chemical patterns of lignocellulosic components at microscopic scale and their effect on the simultaneous saccharification and fermentation process (SSF) in the production of bioethanol from Pinus radiata pulps were analyzed by the application of diverse microscopical techniques, including scanning electronic microscopy (SEM), confocal laser scanning microscopy (CLSM) and attenuated total reflectance (ATR) – Fourier transform infrared microspectroscopy. This last technique was accompanied with multivariate methods, including principal component analysis (PCA) and multivariate curve resolution with alternating least squares (MCR-ALS) to evaluate the distribution patterns and to generate pure spectra of the lignocellulosic components of fibers. The results indicate that the information obtained by the techniques is complementary (ultrastructure, confocality and chemical characterization) and that the distribution of components affects the SSF yield, identifying lignin coalescence droplets as a characteristic factor to increase the SSF yield. Therefore, multivariate analysis of the infrared spectra enabled the in situ identification of the cellulose, lignin and lignin-carbohydrates arrangements. These techniques could be used to investigate the lignocellulosic components distribution and consequently their recalcitrance in many applications where minimal sample manipulation and microscale chemical information is required.     

Characterization of the Release of Urea from Coated Fertilizer by Fourier Transform Infrared Spectroscopy with Attenuated Total Reflectance

The development of a simple and cost-effective method for the determination of the release of coated urea has significant implications. Fourier-transform infrared spectroscopy with attenuated total reflectance was employed to determine the release of urea through univariate and multivariate calibration. The results indicated that univariate calibration did not accurately predict the release of urea, whereas partial least squares based on multivariate calibration performed significantly better. Partial least squares had the highest accuracy when the band located at 1420–1520 per centimeter was employed as the input. Moreover, the accuracy was further improved when segmented partial least squares models were developed at low and high urea concentrations. Unsegmented and segmented partial least squares models were employed, and release values were comparable to those measured by colorimetry. This work demonstrated the use of infrared spectroscopy and partial least squares to characterize the release of coated urea.     

Direct determination of ephedrine intermediate in a biotransformation reaction using infrared spectroscopy and PLS

Fourier transform mid-infrared spectroscopy (FT-MIR) coupled with a homemade attenuated total reflectance (ATR) flow-cell was used for on-line monitoring of a biotransformation reaction. The reaction was also monitored off-line by gas chromatography-mass spectrometry (GC-MS) enabling to establish a multivariate model for the infrared data based on partial least squares (PLS) regression. The method developed allowed the simultaneous determination of the substrate, two intermediates and the final product involved in the reduction reaction of 1-phenyl 1,2-propanedione at an initial concentration of 0.5% (v/v). The reaction was accomplished with a whole-cell suspension of Saccharomyces cerevisiae in a phosphate buffer of pH 3.0 at 32+/-1 degrees C. The ATR infrared monitoring was performed directly on the suspension cell without any separation process or extraction over 3h, totaling 188 spectra. The data were split into two subsets, with 158 times for calibration and 30 times for validation. The results showed that the proposed method may be used for on-line monitoring of the biotransformation reactions when the initial concentration is very low.     

Thermally induced solid-state transformation of cimetidine. A multi-spectroscopic/chemometrics determination of the kinetics of the process and structural elucidation of one of the products as a stable N3-enamino tautomer

Exposure of cimetidine (CIM) to dry heat (160–180 °C) afforded, upon cooling, a glassy solid containing new and hitherto unknown products. The kinetics of this process was studied by a second order chemometrics-assisted multi-spectroscopic approach. Proton and carbon-13 nuclear magnetic resonance (NMR), as well as ultraviolet and infrared spectroscopic data were jointly used, whereas multivariate curve resolution with alternating least squares (MCR-ALS) was employed as the chemometrics method to extract process information. It was established that drug degradation follows a first order kinetics.     

Comparison of two vibrational procedures for the direct determination of mancozeb in agrochemicals

The direct determination of mancozeb in agrochemicals has been made by diamond attenuated total reflectance (ATR) Fourier transform infrared spectroscopy in the middle range (DATR-MIR) and diffuse reflectance infrared Fourier transform spectroscopy in the near range (DR-NIR) methods using in both cases a previous identification of the samples using a dendrographic classification and an appropriate partial least squares (PLS) calibration established from a set of nine external standards and optimized for each type of sample. It was analyzed a heterogeneous population of 11 samples obtained from the Spanish market, containing different co-formulated products, such as fosetyl-Al, copper oxychloride, metalaxyl or cymoxanil. High performance liquid chromatography (HPLC) was used as reference method for validation of both vibrational strategies. The close agreement between values found for both, DATR-MIR and DR-NIR methods, and reference HPLC values indicates the accuracy and reliability of the proposed techniques for the direct determination of mancozeb in commercially available formulations.     

Structural Inhomogeneity in Electrolyte Solutions: The Calcium Perchlorate–Water System

A new approach has been proposed to study the structure of aqueous electrolyte solutions. NIR, Raman and attenuated total reflectance, Fourier transform infra-red (ATR FTIR) spectra have been measured for aqueous calcium perchlorate solutions in the 0.22–4.3 mol·L^?1 (0.22–7.46 mol·kg^?1) concentration range at 25 °C. By the methods of principal component analysis (PCA) and multivariate curve resolution—alternating least squares (MCR-ALS) the number, spectra and concentration profiles have been determined for spectroscopically distinguishable forms of water and ClO ₄ ^? ion in solutions. The results have been analyzed using a phenomenological model, establishing thereby: concentration ranges for structural rearrangements of the solution, the nature of structural microirregularities and different states of the ClO ₄ ^? ion in the areas of domination of the natural water structure, and of cybotactic groups of calcium perchlorate hexa and tetra hydrates.     

Kinetic modeling of the adsorption rate of a gaseous adsorbate on a granular adsorbent by ultra-rapid-scanning Fourier transform infrared spectrometry

A novel method for determining the rates of adsorption of gaseous adsorbates on granular adsorbents in the millisecond time regime is described. Mixtures of the adsorbate and nitrogen are passed through a solenoid valve and 100 mg of the adsorbent for periods of (typically) 100 ms. The concentration of the adsorbate passing into a low-volume, long path length gas cell is measured with an ultra-rapid-scanning Fourier transform infrared spectrometer capable of gathering 200 mid-infrared spectra per second with 6-cm(-1) resolution. The pressure of the gas entering the cell is measured simultaneously with a capacitance manometer. A dynamic mathematical model was developed to analyze and describe the results in terms of a Langmuir isotherm. The success of this approach is demonstrated by the estimation of the rate of adsorption of vapor-phase acetaldehyde on aminopropylsilylated granular silica gel.     

Quantitative determination of sodium perborate and sodium percarbonate in detergent powders by infrared spectrometry

Sodium perborate (SPB) and sodium percarbonate (SPC) are solid compounds which act as sources of H₂O₂ in solution for stain bleaching, being considered as oxidizing agents in washing powder. This research deals with the quantitative determination of SPB and SPC by an analytical procedure based on attenuated total reflectance Fourier transform infrared spectrometry, utilizing partial least squares for data processing in the 1600-800 cm⁻¹ spectral region. The statistical parameters such as R ², standard error of prediction and relative standard deviation have been evaluated, while number of factors, number of scans and resolution were optimized. The standard deviation of method was 0.006 and 0.010 for SPC and SPB, respectively.     

Reflection and transmission mid-infrared spectroscopy for rapid determination of coal properties by multivariate analysis

In the present paper, the influence of different acquisition techniques (transmission, diffuse reflectance infrared Fourier transform and attenuated total reflectance) in the determination of nine coal properties related to combustion power plants has been studied. Raw coal samples of different origins were pooled for developing a correlation between the resultant spectra and the corresponding coal properties by multivariate analysis techniques. Thus, the existent collinearity in mid-infrared coal spectra led to the application of partial least squares regression (PLS), studying simultaneously the influence of different spectroscopic units as well as several spectral data mathematical pre-treatments. On the other hand, a principal component analysis (PCA) revealed a relationship between principal components and coal composition in both transmission and reflection techniques. Although the best accuracy and precision results were obtained for coal properties related to organic matter, the system was also able to differentiate coal samples attending to the presence of a specific mineral matter, kaolinite.     

ICE: a new method for the multivariate curve resolution of hyperspectral images

The iterated constrained endmembers (ICE) algorithm is a new method of unmixing hyperspectral images that combines aspects of multivariate curve resolution (MCR) methods in chemometrics and unmixing algorithms in remote sensing. Like many MCR methods, ICE also estimates pure components, or endmembers, via alternating least squares; however, it is explicitly based on a convex geometry model and estimation is carried out in a subspace of reduced dimensionality defined by the minimum noise fraction (MNF) transform. In this paper, we describe the ICE algorithm and its properties. We also illustrate its use on a hyperspectral image of cervical tissue. The unmixing of hyperspectral images presents some unique challenges, and we also outline where further development is required. © 2008 John Wiley & Sons, Ltd.     

人工神经元网络—红外光谱测定水溶液中山梨糖和山梨醇

研究了用傅里叶变换－衰减全反射红外光谱法同时测定水溶液中的山梨糖和山梨醇，同盱其特征吸收峰重叠较严重，提出了用人工神经元网络处理红光谱的方法，并对标准样品和实际发酵液中的山梨糖和山梨醇进行了测定，结果满意。     

Chemometrics study of the kinetics of the Griess reaction

The kinetics of the Griess reaction in which 3‐nitroaniline acts as a nitrosation agent and 1‐naphtylamine as a coupling reagent was studied by chemometrics methods. The kinetic reaction was investigated under pH 1.0 and 25°C by UV‐vis spectrophotometry. The concentrations of nitrite, 3‐nitroaniline and 1‐naphtylamine were such that a second‐order kinetic reaction took place. Data explorations based on principal component analysis and multivariate curve resolution–alternating least squares were performed to obtain information about the reaction. Calculation of band boundaries of the multivariate curve resolution–alternating least squares solutions showed that the rotational ambiguities associated with the calculation of spectra and concentration profiles have been completely removed. The decrease in the ambiguity of the recovered solutions was closely related to the application of the equality constraint. The results of the exploratory data analysis showed that the kinetic reaction proceeds through a two‐step mechanism. Moreover, the two‐steps are second order. Data analysis approaches based on hard modeling and global hard modeling were used to resolve profiles of the reactants, intermediates and products and to evaluate the rate constants. Copyright © 2013 John Wiley & Sons, Ltd.     

CeO2添加对Ag/A12O3催化剂低温氨氧化性能的影响

采用活性测试和氮气吸附、X射线衍射、X射线光电子能谱、紫外-可见漫反射吸收光谱、高倍透射电镜、原位漫反射傅里叶变换红外光谱和O2脉冲吸附等研究了铈添加对Ag/Al2O3催化剂低温氨氧化性能的影响.结果表明,适量铈的添加可以明显促进Ag/Al2O3催化剂的低温氨氧化活性,且对催化剂的选择性影响不大.添加铈不仅可以促进Ag/Al2O3催化剂表面吸附和活化O2的能力,而且可促进催化剂表面对氨的解离吸附和活化.这是铈促进Ag/Al2O3催化剂低温氨氧化活性的主要原因.     

Application of attenuated total reflectance Fourier transform infrared spectrometry to the determination of sodium percarbonate in washing powder detergent

In this paper, a novel and precise analytical procedure has been developed for quantitative determination of sodium percarbonate (SPC) in washing powder. The method is based on the partial least squares (PLS) treatment of data obtained by attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectrometry in wavenumber region of 1435-1342 cm⁻¹. The statistical parameters such as R², RSD, SEC and SECV have been evaluated, and number of factors, number of scan and the resolution have been optimized. In this method R² and RSD for five independent analyses of a 0.552 g per 100 g solution of SPC, SEC for 10 standard samples and SECV for five validation samples were 0.998, 1.011, 0.002 and 0.039 respectively.Results obtained for six different commercial washing powders compared well with those obtained with a standard method.     

胞外高聚物分离富集-火焰原子吸收法测定水样中镍

以胞外高聚物PF-2作为镍的分离富集新材料,利用扫描电镜(SEM)、X射线能量色散分析仪(EDX)和傅里叶变换红外光谱(FTIR)对其进行表征.以火焰原子吸收法为检测手段,研究了胞外高聚物PF-2对水中Ni(Ⅱ)的吸附性能.结果表明:在pH 5.0,此吸附剂对水中的Ni(Ⅱ)具有很强的吸附能力.高聚物PF-2对Ni(Ⅱ...     

Quantitative Analysis of Chromium(VI) in Dilute Solution by Using Adsorption and Diffuse Reflectance Near‐infrared Spectroscopy

A method for quantitative determination of metal element in aqueous solution was developed by using adsorption and diffuse reflectance near‐infrared spectroscopy (DRNIRS). In this method, the analyte is firstly adsorbed onto the resin from the dilute solution, and then the adsorbed analyte is directly determined in the sorbent by using DRNIRS. Enrichment of the analyte is achieved by the adsorption from the dilute solution, and quantitative determination is accomplished by using multivariate calibration technique. Taking chromium(VI) in river water as the analytical target, adsorption conditions and the partial least squares (PLS) model was optimized. The results show that chromium(VI) can be immobilized onto the adsorbent and quantitatively measured by DRNIRS and multivariate calibration. With cross validation and external validation, the correlation coefficient between the reference and predicted concentration was found to be above 0.98 in the range of 0.75–29.90 mg·L⁻¹ for the PLS model, and the interference of the coexisting matrix was eliminated with the aid of multivariate calibration.     

Surface selectivities in wet chemically modified PVC films. Influence of reaction conditions

Wet chemical modification reactions of PVC films in solvent/nonsolvent mixtures were performed. Three thiol compounds of different size and reactivity were used varying the solvent quality, temperature, and reaction times. The evolution of the concentration gradients within the films was studied using confocal Raman spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy. Surface selectivities were calculated and discussed in terms of the different relative reaction rate constants.     

Application of Fourier transform infrared (FT-IR) spectroscopy combined with chemometrics for authentication of cod-liver oil

Some vegetable oils such as canola (CaO), corn (CO), soybean (SO), and walnut (WO) oils have similar color with cod liver oil (CLO), therefore, the presence of these oils was difficult to detect using naked eye. For this reason, Fourier transform infrared (FTIR) spectroscopy using horizontal attenuated total reflectance (HATR) as sampling accessory and in the combination with chemometrics was developed for detection and quantification of these vegetable oils as adulterants in CLO. The quantification of vegetable oils was carried out by using multivariate calibrations of partial least squares (PLS) and principle component regression (PCR), while the classification between pure CLO and CLOs adulterated with CaO, CO, SO, and WO was performed using discriminant analysis (DA). PLS with FTIR normal spectra was more suitable compared with PCR for quantification purposes with coefficient of determination (R²) higher than 0.99 and root mean square error of calibration (RMSEC) in the range of 0.04-0.82% (v/v). The PLS model was further used to predict the levels of these vegetable oils in independent samples for validation/prediction purpose. The root mean square error of prediction (RMSEP) values obtained were of 1.75% (v/v) (CaO), 1.39% (v/v) (CO), 1.35% (v/v) (SO), and 1.37% (v/v) (WO), respectively. The classification using DA revealed that the developed method can classify CLO and that mixed with these vegetable oils using 9 principal components.     

主成分分光光度法中主成分的选择

主成分分析是全光谱分析度分析中常用的校正方法。本文提出第一主成分并不是与因最线性相关的主成分。为此，我们利用扫描算法众多主成分中选择与因变量（浓度）最相关的主成分，从而使计算结果更准确可信。本文还对单因变量和多因变量两种情况下主成分选择的统计量进行了讨论。     

Two-dimensional correlation analysis of continuous online in situ ATR-FTIR on the adsorption of butyl xanthate at the surface of a-PbO

The adsorption behavior of butyl xanthate on the surface of lead oxide was investigated using continuous online in situ attenuated total reflectance Fourier transform infrared（ATR-FTIR） spectroscopy technique and two dimensional（2D） correlation analysis.The adsorbed layer studied was prepared by coating α-PbO particles onto the surfaces of the ZnSe crystal.The appearance of spectral peaks at 1203 cm^-1,1033 cm^-1 and their red shift indicated the formation and aggregation of xanthate at the surface of α-PbO.According to 1R intensity changes after rinsing with deionized water and a NaOH solution,the adsorption was proved to be a chemisorption type.The competition between xanthate and OH for the surfaces leads to desorption of xanthate at higher pH.The technique of 2D correlation ATR-FTIR spectroscopy was used to evaluate the changing order of spectral intensities in the adsorption process,and the results indicated that xanthate micelles were formed at the surfaces.The adsorption kinetics of butyl xanthate was found to be a pseudo-second-order reaction model and the adsorption capacity of butyl xanthate at α-PbO was as high as 281 mg g^-1 after 150 min.