Synthesis and characterization of bis[dicarboxylatotetraorganodistannoxane] units involving 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoic acids: An investigation of structures by X-ray diffraction, NMR, electrospray ionisation MS and assessment of in vitro cytotoxicity

Reactions of 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoic acids (LHH′, where the aryl group is an R-substituted phenyl ring such that for L¹HH′: R = H; L²HH′: R = 2′-CH₃; L³HH′: R = 3′-CH₃; L⁴HH′: R = 4′-CH₃; L⁵HH′: R = 4′-Cl; L⁶HH′: R = 4′-Br) with ⁿBu₂SnO in a 1:1 molar ratio yielded complexes of composition {[ⁿBu₂Sn(LH)]₂O}₂. The complexes have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analyses. The crystal structures of {[ⁿBu₂Sn(L¹H)]₂O}₂ (1), {[ⁿBu₂Sn(L⁴H)]₂O}₂ (4), {[ⁿBu₂Sn(L⁵H)]₂O}₂ (5) and {[ⁿBu₂Sn(L⁶H)]₂O}₂ (6) were determined. The compounds are centrosymmetric tetranuclear bis(dicarboxylatotetrabutyldistannoxane) complexes containing a planar Sn₄O₂ core in which two μ₃-oxo O-atoms connect an Sn₂O₂ ring to two exocyclic Sn-atoms. The four carboxylate ligands display two different modes of coordination where both modes involve bridging of two structurally distinct Sn-atoms. The solution structures were confirmed by ¹¹⁹Sn NMR spectroscopy by observing two tin resonances in compounds 1, and 4-6. The observed difference between the two tin resonances was about 3 ppm while the differences in ¹³C resonances were even smaller. Compounds {[ⁿBu₂Sn(L²H)]₂O}₂ (2) and {[ⁿBu₂Sn(L³H)]₂O}₂ (3) undergo a very complex exchange processes in deuteriochloroform solution. The in vitro cytotoxic activity of compounds 1 and 4 against WIDR, M19 MEL, A498, IGROV, H226, MCF7 and EVSA-T human tumour cell lines is reported.     

Self-assembly of diorganotin(IV) 2-{[(E)-1-(2-oxyaryl)alkylidene]amino}acetates: An investigation of structures by X-ray diffraction, solution and solid-state tin NMR, and electrospray ionization MS

The diorganotin(IV) compounds, [Me₂SnL²(OH₂)]₂ (1), [ⁿBu₂SnL²(OH₂)]₂ (2), [ⁿBu₂SnL¹]₃ · 0.5C₃H₆O (3), [ⁿBu₂SnL³]₃ · 0.5C₆H₆ (4) and [Ph₂SnL³]_n · 0.5C₆H₆ (5) (L = carboxylic acid residue, i.e., 2-{[(E)-1-(2-oxyaryl)alkylidene]amino}acetate), were synthesized by treating the appropriate diorganotin(IV) dichloride with the potassium salt of the ligand in anhydrous methanol.The reaction of Ph₂SnL² (L = 2-{[(E)-1-(2-oxyphenyl)ethylidene]amino}acetate) with 1,10-phenanthroline (Phen) yielded a 1:1 adduct of composition, [Ph₂SnL²(Phen)] (6).The crystal structures of 1-6 were determined.The crystal of 1 is composed of centrosymmetric dimers of the basic Me₂SnL²(OH₂) moiety, where the two Sn-centres are linked by two asymmetric Sn-O?Sn bridges involving the carboxylic acid O atom of the ligand and a long Sn?O distance of 3.174(2) Å.The dimers are further linked into columns by hydrogen bonds.The coordination geometry about the Sn atom is a distorted pentagonal bipyramid with the two methyl groups in axial positions.The structure of 2 is similar.The same Sn atom coordination geometry is observed in compound 3, which is a cyclic trinuclear[ⁿBu₂SnL¹]₃ compound. Each Sn atom is coordinated by the phenoxide O atom, one carboxylate O atom and the imino N atom from one ligand and both the exo- and endo-carboxylate O atoms (mean Sn-O(exo): 2.35 Å; Sn-O(endo): 2.96 Å) from an adjacent ligand to form the equatorial plane, while the two butyl groups occupy axial positions. Compound 4 was found to crystallize in two polymorphic forms. The Sn-complex in both forms has a trinuclear [ⁿBu₂SnL³]₃ structural motif similar to that found in 3. In compound 5, distorted trigonal bipyramidal Ph₂SnL³ units are linked into polymeric cis-bridged chains by a weak Sn?O interaction (3.491(2) Å) involving the exocyclic O atom of the tridentate ligand of a neighboring Sn-complex unit. This interaction completes a highly distorted octahedron about the Sn atom, where the weakly coordinated exocyclic O atom and one phenyl group are trans to one another. In contrast, a monomeric distorted pentagonal bipyramidal geometry is found for adduct 6 where the Sn-phenyl groups occupy the axial positions. The solution and solid-state structures are compared by using ¹¹⁹Sn NMR chemical shift data. Compounds 1-6 were also studied using ESI-MS and their positive- and negative-ions mass fragmentation patterns are discussed.     

Pd(0) and Pd(II) derivatives with heteroannularly bridged chiral ferrocenyl diphosphine ligands - A stereochemical analysis

The ligands (S_c, S_p)-1-diphenylphosphino-2,1′-(1-dicyclohexylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^CyPF, and (S_c, S_p)-1-diphenylphosphino-2,1′-(1-diphenylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^PhPF, have been used in the synthesis of the new Pd(0) and Pd(II) derivatives [Pd(PP^CyPF)(DMFU)] (1) (DMFU = dimethylfumarate), [Pd(PP^CyPF)(MA)] (2) (MA = maleic anhydride), [Pd(η³-2-Me-C₃H₄)(PP)]OTf (PP = PP^CyPF, 3; PP^PhPF, 4) (OTf = triflate), [PdRR′(PP)] (R = Me, R′ = Cl, PP = PP^CyPF, 5, PP^PhPF, 6; R = R′ = Me, PP = PP^CyPF, 7, PP^PhPF, 8; R = R′ = C₆F₅, PP = PP^CyPF, 9, PP^PhPF, 10). The molecular structure of 7 has been determined by X-ray diffraction. In the cases of complexes 1-4 two isomers are formed depending on the orientation of the ancillary ligand with respect to the ferrocenyl core. The stereochemistry of these complexes has been determined. In complex 6 the two possible isomers are obtained whereas in complex 5 the derivative with the Me group trans to PPh₂ is selectively formed. Restricted rotation of the pentafluorophenyl groups with respect to the Pd-C bond has been found in 9 and 10. In all derivatives the conformation of the ferrocenyl ligand is the same as that seen by X-ray diffraction and deduced from NMR data.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Di-n-octyltin(IV) complexes with 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoic acid: Syntheses and assessment of solid state structures by Sn Mössbauer and X-ray diffraction and further insight into the solution structures using electrospray ionization MS, Sn NMR and variable temperature NMR spectroscopy

Reactions of 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoic acids (LHH′, where the aryl group is an R-substituted phenyl ring such that for L¹HH′: X = H; L²HH′: X=2′-OCH₃; L³HH′: X = 3′-CH₃; L⁴HH′: X = 4′-CH₃; L⁵HH′:X = 4′-Cl) with ⁿOct₂SnO in 2:1 and 1:1 molar ratios have been investigated. Two types of complexes, ⁿOct₂Sn(LH)₂ and {[ⁿOct₂Sn(LH)]₂O}₂, were isolated and they have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analyses. The crystal structures of ⁿOct₂Sn(L¹H)₂ (1), {[ⁿOct₂Sn(L²H)]₂O}₂ (3) and {[ⁿOct₂Sn(L³H)]₂O}₂(4) were determined. The mononuclear complex 1 was found to adopt a skew-trapezoidal bipyramidal arrangement around the tin atom while 3 and 4 are centrosymmetric tetranuclear bis(dicarboxylatotetrabutyldistannoxane) complexes containing a planar Sn₄O₂ core in which two μ₃-oxo O-atoms connect an Sn₂O₂ ring to two exocyclic Sn-atoms. The solution structures were confirmed by ¹¹⁹Sn NMR spectroscopy by observing one tin resonance in compound 1 and two tin resonances in {[ⁿOct₂Sn(L⁵H)]₂O}₂ (5). {[ⁿOct₂Sn(L²H)]₂O}₂ (3) and {[ⁿOct₂Sn(L³H)]₂O}₂ (4) undergo very complex exchange processes in deuteriochloroform solution, which has been confirmed by variable temperature ¹H NMR spectroscopy. The cleavage of the most labile bond in the molecule was studied by ESI mass spectrometry.     

Allylpalladium (II) complexes with dichalcogenoimidodiphosphinate ligands: Synthesis, structure, spectroscopy and their transformation into palladium chalcogenides

The synthesis, characterization and thermal behavior of new monomeric allylpalladium (II) complexes with dichalcogenoamidodiphosphinate anions are reported. The complexes [R = H, R′ = Prⁱ, E = S (1a); R = H, R′ = Prⁱ, E = Se (1b); R = H, R′ = Ph, E = S (1c); R = H, R′ = Ph, E = Se (1d); R = Me, R′ = Prⁱ, E = S (2a); R = Me, R′ = Prⁱ, E = Se (2b); R = Me, R′ = Ph, E = S (2c); R = Me, R′ = Ph, E = Se (2d)] have been prepared by room temperature reaction of [Pd(η³-CH₂C(R)CH₂)(acac)] (acac = acetylacetonate) with dichalcogenoimidodiphosphinic acids in acetonitrile solution. The complexes have been characterized by multinuclear NMR (¹H, ¹³C{¹H}, ³¹P{¹H}, ⁷⁷Se{¹H}), FT-IR and elemental analyses. The crystal structures of complexes 1a, 1d and 2d have been reported and they consist of a six-membered PdE₂P₂N ring (E = S for 1a and Se for 1d and 2d) and an allyl group, C₃H₄R(R = H for 1a and 1d and Me for 2d). Thermogravimetric studies have been carried out for few representative complexes. The complexes thermally decompose in argon atmosphere to leave a residue of palladium chalcogenides, which have been characterized by PXRD, SEM and EDS.     

Intramolecularly coordinated organoantimony(III) carboxylates

The reactions of organoantimony chlorides L^1,2SbCl₂1 and 2 ([2,6-(ROCH₂)₂C₆H₃]⁻, R = Me; L¹ and R = t-Bu; L²) with silver salts of selected carboxylic acids resulted to corresponding organoantimony carboxylates L^1,2Sb(OOCR′)₂, 1a-c (for L¹) and 2a-c (for L²), where R′ = CH₃ for 1a, 2a; R′ = CHCH₂ for 1b, 2b and R′ = CF₃ for 1c, 2c. All compounds were characterized by the help of elemental analysis, ESI-MS, ¹H and ¹³C NMR spectroscopy. The solid state structure investigation using single crystal X-ray diffraction techniques (2a, c) and IR spectroscopy revealed significant differences in coordination mode of both O,C,O chelating ligand and carboxylic groups in this set of compounds. The structure of all compounds in solution of non-coordinating solvent (CDCl₃) was determined by means of variable temperature ¹H, ¹³C, ¹⁹F NMR spectroscopy and IR spectroscopy.     

Diphenyltin(IV) complexes of the 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-olates: Synthesis and multinuclear NMR, Sn Mössbauer, electrospray ionization MS, X-ray characterization and assessment of in vitro cytotoxicity

A series of cis-bis{5-[(E)-2-(aryl)-1-diazenyl]quinolinolato}diphenyltin(IV) complexes have been synthesized and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analysis. The structures of a ligand L⁶H (i.e., 5-[(E)-2-(4-ethoxyphenyl)-1-diazenyl]quinolin-8-ol) and three diphenyltin(IV) complexes, viz., Ph₂Sn(L¹)₂ · (CH₃)₂CO (1), Ph₂Sn(L⁴)₂ (4) and Ph₂Sn(L⁵)₂ (5) (L = 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol: aryl = phenyl - (L¹H); 4′-methylphenyl - (L⁴H) and 4′-bromophenyl - (L⁵H)) were determined by single crystal X-ray diffraction. In general, the complexes were found to adopt a distorted cis-octahedral arrangement around the tin atom. These complexes retain their solid-state structure in non-coordinating solvent as evidenced by ¹¹⁹Sn NMR spectroscopic results. The in vitro cytotoxicity of 1 is reported and compared with Ph₂Sn(Ox)₂ (Ox = deprotonated quinolin-8-ol) against seven well characterized human tumor cell lines.     

Synthesis, characterization, cytotoxic activity and crystal structures of tri- and di-organotin(IV) complexes constructed from the β-{[(E)-1-(2-hydroxyaryl)alkylidene]amino}propionate and β-{[(2Z)-(3-hydroxy-1-methyl-2-butenylidene)]amino}propionate skeletons

Reactions of potassium β-{[(E)-1-(2-hydroxyaryl)alkylidene]amino}propionates (L¹HK-L³HK) and potassium β-{[(2Z)-(3-hydroxy-1-methyl-2- butenylidene)]amino}propionate (L⁴HK) with R₃SnCl (R = Ph and ⁿBu) and ⁿBu₂SnCl₂ yielded complexes of composition Ph₃SnL¹H (1), Ph₃SnL²H (2), Ph₃SnL⁴H (3), ⁿBu₃SnL¹H (4), and {[ⁿBu₂Sn(L²H)]₂O}₂ (5) and {[ⁿBu₂Sn(L³H)]₂O}₂ (6), respectively. These complexes have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analyses. The crystal structures of 1, 4, 5 and 6 were determined. In the solid state, compound 1 is a one-dimensional polymer built from SnPh₃ moieties bridged by single carboxylate ligands, but two alternating modes of bridging are present along the polymeric chain. Compound 4 is also a one-dimensional polymer built from SnBu₃ moieties bridged by the two carboxylate O-atoms of a single ligand, but only one mode of bridging is present. Di-n-butyltin compounds 5 and 6 are centrosymmetric tetranuclear bis(dicarboxylatotetrabutyldistannoxane) complexes containing a planar Sn₄O₂ core in which two μ₃-oxo O-atoms connect an Sn₂O₂ ring to two exocyclic Sn-atoms. The four carboxylate ligands display two different modes of coordination where both modes involve bridging of two Sn-atoms. The solution structures were predicted by ¹¹⁹Sn NMR spectroscopy. The in vitro cytotoxic activity of compound 5 against WIDR, M19 MEL, A498, IGROV, H226, MCF7 and EVSA-T human tumor cell lines is reported.     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Schiff bases of 1′-hydroxy-2′-acetonaphthone containing chalcogen functionalities and their complexes with and (p-cymene)Ru(II), Pd(II), Pt(II) and Hg(II): Synthesis, structures and applications in C-C coupling reactions

Schiff bases of 1′-hydroxy-2′-acetonaphthone (HAN) containing chalcogen functionalities, 1-HO-C₁₀H₆-2-CH₃)CN-(CH₂)_nEC₆H₄-4-R (R = H or OMe; n = 2 or 3; E = S (L¹-L²), Se (L³-L⁴) or Te (L⁵-L⁶)) have been synthesized in yield 90-95%. They show characteristic ¹H, ¹³C{¹H} ⁷⁷Se{¹H} and ¹²⁵Te{¹H} (in case of selenated and tellurated species, respectively) NMR spectra. Their complexation with Pd(II), Pt(II), Hg(II) and (p-cymene)Ru(II) has been explored. The single-crystal structures of ligands L¹, L³ and L⁶ and complexes of Pd(II) with L¹, L², L³ and L⁵ have been determined. The geometry of Pd is close to square planar in all the complexes and the ligands coordinate in a uni-negative tridentate mode. The Pd-N bond lengths are in the range 1.996(7)-2.019(5) ?. The Pd-Se bond distance is 2.3600(5) ? whereas Pd-Te is 2.5025(7) ?. The Pd(II) complexes of L¹-L⁵ have been found promising as homogeneous catalyst for Heck and Suzuki reactions. The yields obtained were up to 85%.     

Syntheses, structural and spectroscopic characterization of novel zinc(II)-bis(trithiocarbimato) complexes and bis(N-methylsulfonyldithiocarbimate)-sulfide

Four zinc(II)-bis(trithiocarbimato) complexes with the general formula A₂[Zn(RSO₂NCS₃)₂] [A = Ph₄P⁺: R = CH₃ (1), 4-CH₃C₆H₄ (2); A = Bu₄N⁺: R = CH₃ (3), 4-CH₃C₆H₄ (4)] were obtained by the reaction of sulfur with the correspondent zinc(II)-bis(dithiocarbimato) complexes. Additionally, the compound (Ph₄P)₂[(CH₃SO₂NCS₂)₂S)] (5) was prepared from the potassium methylsulfonildithiocarbimate by oxidation with iodine. The compounds were characterized by elemental analyses and IR, ¹H NMR and ¹³C NMR spectroscopies. The compounds 4 and 5 were also characterized by X-ray diffraction techniques. The compound 4 crystallizes in the centrosymmetric space group C2/c of the monoclinic system. The Zn(II) is in a distorted tetrahedral environment (ZnS₄) in compound 4, and differ from the coordination mode observed in compound 1, which involves one sulfur and one nitrogen atom of each trithiocarbimate ligand. Compound 5 is the first example of a compound containing a bis(N-alkylsulfonyldithiocarbimate)-sulfide dianion and crystallises in the non-centrosymmetric space group P4₁2₁2 of the tetragonal system.     

Dibutyltin(IV) complexes of the 5-[(E)-2-(Aryl)-1-diazenyl]-2-hydroxybenzoic acid ligand: an investigation of structures by X-ray diffraction, solution and solid state tin NMR, electrospray ionisation MS and assessment of in vitro cytotoxicity

A series of dibutylbis{5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoato}tin(IV) complexes, Bu₂Sn(LH)₂, have been prepared and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR and ESI mass spectrometry in solution. The structures of the complexes Bu₂Sn(L¹H)₂ (1), Bu₂Sn(L³H)₂ (3), Bu₂Sn(L⁴H)₂ (4), and Bu₂Sn(L⁶H)₂ (6) (L = 5-[(E)-2-(aryl)-1-diazenyl]-2-hydroxybenzoate: aryl = phenyl (L¹H), 3-methylphenyl (L³H), 4-methylphenyl (L⁴H) and 4-bromophenyl (L⁶H)) were determined by X-ray crystallography and ¹¹⁷Sn CP-MAS NMR spectroscopy in the solid state. In general, the complexes were found to adopt a skew-trapezoidal bipyramidal arrangement around the tin atom. In addition, there are weak bridging intermolecular Sn?O contacts in complexes 1 and 3, but not in 4 and 6, where one of the hydroxy oxygen atoms from a neighboring molecule coordinates weakly with the Sn atom, thereby completing a seventh coordination site in the extended Sn coordination sphere. The Sn?O distance is 3.080(2) and 3.439(2) Å in 1 and 3, respectively, which are significantly shorter than the sum of the van der Waals radii of the Sn and O atoms (∼3.8 Å). In 1, this Sn?O interaction links the molecules into polymeric chains. In 3, these interactions link pairs of molecules into head-to-head dimeric units. The in vitro cytotoxicity of compound 2 indicates better results than cisplatin and etoposide against seven well characterized human tumor cell lines.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Synthesis, characterization and electrochemical behavior of unsymmetric transition metal-terminated biphenyl ethynyl thiols

The synthesis of the biphenyl alkynyl thiols and thioesters R′-CC-C₆H₄-C₆H₄-SR (3: R′ = SiMe₃, R = C(O)Me; 4: R′ = SiMe₃, R = H; 5: R′ = H, R = C(O)Me) from I-C₆H₄-C₆H₄-SC(O)Me (1) is described. Molecules 1 and 5 have been used as starting materials in the synthesis of mono- and heterobimetallic transition metal complexes of type L_nM′-CC-C₆H₄-C₆H₄-SR (7: L_nM′ = Fc, R = C(O)Me; 8: L_nM′ = Fc, R = H; 10: L_nM′ = (Ph₃P)Au, R = C(O)Me; 14: L_nM′ = FcPPh₂-Au, R = C(O)Me; Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe; FcPPh₂ = (η⁵-C₅H₅)(η⁵-C₅H₄PPh₂)Fe). While complex 7is accessible by the Sonogashira cross-coupling of Fc-CCH (6) with 1, molecules 10 and 14 can be prepared by treatment of the thioester 5 with (Ph₃P)AuCl (9) and FcPPh₂-AuCl (13), respectively.The molecular solid state structures of 3, 7, 10 and 13-15 have been determined by single crystal X-ray crystallographic analysis. Typical features of these species are their linear M-CC-C₆H₄-C₆H₄-SR structure and the lack of coplanarity of the biphenyl arene rings. The overall length of these complexes are 13.345(2) Å for 3 (molecule A), 15.146(3) Å for 7, 15.705(2) Å for 10 (molecule A) and 15.649(4) Å for 14. The thioester groups are pointing away from the ferrocene building block. In 7 a linear 1D chain is set-up by π-interactions between two independent molecules of 7. Characteristic for 15 is the formation of a Au₂I₂ ring, while 13 is monomeric.All compounds were studied with cyclic voltammetry. Characteristic are the reversible ferrocene Fe(II)/Fe(III) redox wave, the irreversible reduction of Au(I) to Au(0), the oxidative cleavage of the S-C(O)Me sulfur-carbon (3, 5, 7, 10 and 14) and of the sulfur-hydrogen bond (4 and 8), respectively. Electronic effects extending from the -SH-end group to the ferrocene unit resulting in considerable shifts of the redox potential of the latter entity are found. Coordination of Au(I) at the FcPPh₂ moiety also results in a shift of the redox potential of the ferrocene group indicative of an electron withdrawing effect of the Au(I) species.     

Syntheses,characterizations and crystal structures of monomeric or macrocyclic compounds of di- or triorganotin (IV) moieties with 4,4′-thiodibenzenethiol

Six organotin compounds with 4,4′-thiodibenzenethiol (LH₂) of the type R_nSnL_4−nSnR_n (n = 3: R = Me 1, Ph 2, PhCH₂3, n = 2: R = Me 4, Ph 5, PhCH₂6) have been synthesized. All compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra. The structures of compounds 1, 2, 4, 5 and 6 were also determined by X-ray diffraction analysis, which revealed that compounds 1 and 2 were monomeric structures, compounds 4, 5 and 6 were centrosymmetric dinuclear macrocyclic structures, and all the tin(IV) atoms are four-coordinated. Furthermore, supramolecular structures were also found in compounds 1, 2, 4, 5 and 6, which exhibit one-dimensional chains, two-dimensional networks or three-dimensional structures through intermolecular C–H?S weak hydrogen bonds (WHBs), non-bonded Sn?S interactions or C–H?π interactions.     

Reactions of trimethylsiloxychlorosilanes with lithium metal - On the mechanism of the formation of trimethylsiloxysilyllithium compounds LiSiRR’(OSiMe3)

The reaction pathway for the formation of the trimethylsiloxysilyllithium compounds (Me₃SiO)RR′SiLi (2a: R = Et, 2b: R = ⁱPr, 2c: R = 2,4,6-Me₃C₆H₂ (Mes); 2a-c: R′ = Ph; 2d: R = R′ = Mes) starting from the conversion of the corresponding trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-d) in the presence of excess lithium in a mixture of THF/diethyl ether/n-pentane at −110 °C was investigated.The trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a: R = Et, 1b: R = ⁱPr, 1c: R = Mes) react with lithium to give initially the trimethylsiloxysilyllithium compounds (Me₃SiO)RPhSiLi (2a-c). These siloxysilyllithiums 2 couple partially with more trimethylsiloxychlorosilanes 1 to produce the siloxydisilanes (Me₃SiO)RPhSi-SiPhR(OSiMe₃) (Ia-c), and they undergo bimolecular self-condensation affording the trimethylsiloxydisilanyllithium compounds (Me₃SiO)RPhSi-RPhSiLi (3a-c). The siloxydisilanes I are cleaved by excess of lithium to give the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2). In the case of the two trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a: R = Et, 3b: R = ⁱPr) a reaction with more trimethylsiloxychlorosilanes (Me₃SiO)RPhSiCl (1a, 1b) takes place under formation of siloxytrisilanes (Me₃SiO)RPhSi-RPhSi-SiPhR(OSiMe₃) (IIa: R = Et, IIb: R = ⁱPr) which are cleaved by lithium to yield the trimethylsiloxysilyllithiums (Me₃SiO)RPhSiLi (2a, 2b) and the trimethylsiloxydisilanyllithiums (Me₃SiO)RPhSi-RPhSiLi (3a, 3b). The dimesityl-trimethylsiloxy-silyllithium (Me₃SiO)Mes₂SiLi (2d) was obtained directly by reaction of the trimethylsiloxychlorosilane (Me₃SiO)Mes₂SiCl (1d) and lithium without formation of the siloxydisilane intermediate. Both silyllithium compounds 2 and 3 were trapped with HMe₂SiCl giving the products (Me₃SiO)RR′Si-SiMe₂H and (Me₃SiO)RPhSi-RPhSi-SiMe₂H.     

Crystal and solution structures of di-n-butyltin(IV) complexes of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol and benzoic acid derivatives: En route to elegant self-assembly via modulation of the tin coordination geometry

Reactions of ⁿBu₂SnCl(L¹) (1), where L¹ = acid residue of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol, with various substituted benzoic acids in refluxing toluene, in the presence of triethylamine, yielded dimeric mixed ligand di-n-butyltin(IV) complexes of composition [ⁿBu₂Sn(L¹)(L^2-6)]₂ where L² = benzene carboxylate (2), L³ = 2-[(E)-2-(2-hydroxy-5-methylphenyl)-1-diazenyl]benzoate (3), L⁴ = 5-[(E)-2-(4-methylphenyl)-1-diazenyl]-2-hydroxybenzoate (4), L⁵ = 2-{(E)-4-hydroxy-3-[(E)-4-chlorophenyliminomethyl]-phenyldiazenyl}benzoate (5) and L⁶ = 2-[(E)-(3-formyl-4-hydroxyphenyl)-diazenyl]benzoate (6). All complexes (1-6) have been characterized by elemental analyses, IR, ¹H, ¹³C and ¹¹⁷Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy and their structures were determined by X-ray crystallography, complemented by ¹¹⁷Sn CP-MAS NMR spectroscopy studies in the solid state. The crystal structure of 1 reveals a distorted trigonal bipyramidal coordination geometry around the Sn-atom where the Cl- and N-atoms of ligand L¹ occupy the axial positions. In complexes 2-5, the molecules are centrosymmetric dimers in which the Sn-atoms are connected by asymmetric μ-O bridges through the quinoline O-atom to give an Sn₂O₂ core. The differences in the Sn-O bond lengths within the bridge range from 0.28 to 0.48 Å, with the longer of the Sn-O distances being in the range 2.56-2.68 Å and the most symmetrical bridge being in 5. The carboxylate group is almost symmetrically bidentate coordinated to the tin atom in 5 (Sn-O distances of 2.327(2) and 2.441(2) Å), unlike the other complexes in which the distance of the carboxylate carbonyl O-atom from the tin atom is in the range 2.92-3.03 Å. The structure of 5 displays a more regular pentagonal bipyramidal coordination geometry about each tin atom than in 2-4. In contrast, the centrosymmetric dimeric structure of 6 involves asymmetric carboxylate bridges, resulting in a different Sn₂C₂O₄ motif. The Sn-O bond lengths in the bridge differ by about 0.6 Å, with the longer distance involving the carboxylate carbonyl O-atom (2.683(2) and 2.798(2) Å for two molecules in the asymmetric unit). The carboxylate carbonyl O-atom has a second, even longer intramolecular contact to the Sn-atom to which the carboxylate group is primarily coordinated, with these Sn?O distances being as high as 3.085(2) and 2.898(2) Å. If the secondary interactions are considered, all the di-n-butyltin(IV) complexes (2-6) display a distorted pentagonal bipyramidal arrangement about each tin atom in which the n-butyl groups occupy the axial positions.     

Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.