Electroanalytical Studies on Cobalt(II) Ion‐Selective Sensor of Polymeric Membrane Electrode and Coated Graphite Electrode Based on N2O2 Salen Ligands

Poly(vinyl chloride)‐based membranes of salen ligands, 2‐((E)‐((1R,2S)‐2‐((E)‐5‐tert‐butyl‐2‐hydroxybenzylideneamino)cyclohexylimino)methyl)‐4‐tert‐butyl phenol (S₁) and 2‐((E)‐((1R,2S)‐2‐((E)‐3,5‐di‐tert‐butyl‐2‐hydroxybenzylideneamino)cyclohexylimino)methyl)‐4,6‐di‐tert‐butylphenol (S₂) were fabricated and explored as cobalt(II) selective electrodes. The performance of the polymeric membrane electrode (PME) and coated graphite electrode (CGE) were compared and it was observed that CGE showed a wide working concentration range of 1.1×10^?8 to 1.0×10^?1 mol L^?1 with a limit of detection of 7.0×10^?9 mol L^?1 exhibiting the Nernstian slope 29.6 mV/decade of activity in the pH range 3.0–9.0. It was used for the determination of cobalt(II) ions in water, soil, beer, pharmaceutical samples and medicinal plants and would be used as an indicator electrode in potentiometric titration with EDTA.     

Simultaneous Detection of Dopamine and Uric Acid under Coexistence of Ascorbic Acid with DNA/Pt Nanocluster Modified Electrode

A novel biosensor by electrochemically codeposited Pt nanoclusters and DNA film was constructed and applied to detection of dopamine (DA) and uric acid (UA) in the presence of high concentration ascorbic acid (AA). Scanning electron microscopy and X‐ray photoelectron spectroscopy were used for characterization. This electrode was successfully used to resolve the overlapping voltammetric response of DA, UA and AA into three well‐defined peaks with a large anodic peak difference (ΔE_pa) of about 184 mV for DA and 324 mV for UA. The catalytic peak current obtained from differential pulse voltammetry was linearly dependent on the DA concentration from 1.1× 10^?7 to 3.8×10^?5 mol·L^?1 with a detection limit of 3.6×10^?8 mol·L^?1 (S/N=3) and on the UA concentration from 3.0×10^?7 to 5.7×10^?5 mol·L^?1 with a detection limit of 1.0×10^?7 mol·L^?1 with coexistence of 1.0×10^?3 mol·L^?1 AA. The modified electrode shows good sensitivity and selectivity.     

A New Amperometric Biosensor Based on HRP/Nano-Au/L-Cysteine/Poly（o-Aminobenzoic acid）-Membrane-Modified Platinum Electrode for the Determination of Hydrogen Peroxide

The third generation amperometric biosensor for the determination of hydrogen peroxide （H2O2） has been described. For the fabrication of biosensor, o-aminobenzoic acid （oABA） was first electropolymerized on the surface of platinum （Pt） electrode as an electrostatic repulsion layer to reject interferences. Horseradish peroxidase （HRP） absorbed by nano-scaled particulate gold （nano-Au） was immobilized on the electrode modified with polymerized o-aminobenzoic acid （poABA） with L-cysteine as a linker to prepare a biosensor for the detection of H2O2. Amperometric detection of H2O2 was realized at a potential of ＋20 mV versus SCE. The resulting biosensor exhibited fast response, excellent reproducibility and sensibility, expanded linear range and low interferences. Temperature and pH dependence and stability of the sensor were investigated. The optimal sensor gave a linear response in the range of 2.99×10^-6 to 3.55×10^-3 mol·L^-1 to H2O2 with a sensibility of 0.0177 A·L^-1·mol^-1 and a detection limit （S/N = 3） of 4.3×10^-7 mol·L^-1. The biosensor demonstrated a 95% response within less than 10 s.     

Voltammetric Determination of Acibenzolar‐S‐Methyl Using a Renewable Silver Amalgam Film Electrode

Acibenzolar‐S‐methyl (ASM) is a novel fungicide applied for crop protection. A renewable silver amalgam film electrode was used for the determination of ASM in pH 3.4 Britton? Robinson buffer using square wave adsorptive stripping voltammetry (SW AdSV). The parameters of the method were optimized. The electroanalytical procedure made possible to determine ASM in the concentration range of 5×10^?8–3×10^?7 mol L^?1 (LOD=4.86×10^?9, LOQ=1.62×10^?8 mol L^?1). The effect of common interfering pesticides and heavy metal ions was checked. The validated method was applied in ASM determination in spiked water samples.     

Determination of Trace of Cobalt in Complex Matrices by Adsorptive Stripping Voltammetry at a Lead Film Electrode

An adsorptive stripping voltammetric procedure for the determination of cobalt in a complex matrices at an in situ plated lead film electrode was described. The procedure exploits the enhancement effect of a cobalt peak observed in the system Co(II)–nioxime–piperazine‐1,4‐bis(2‐ethanesulfonic acid)–cetyltrimethylammonium bromide. The calibration graph was linear from 5×10^?10 to 2×10^?8 mol L^?1 and from 1×10^?10 to 1×10^?9 mol L^?1 for the accumulation times 120 and 600 s, respectively. The detection limit (based on the 3 σ criterion) for Co(II) following accumulation time of 600 s was 1.1×10^?11 mol L^?1. The interference of high concentrations of foreign ions and surfactants was studied.     

Simultaneous Determination of Dopamine and Ascorbic Acid Using the Nano‐Gold Self‐Assembled Glassy Carbon Electrode

Electrochemical behavior of dopamine (DA) was investigated at the gold nanoparticles self‐assembled glassy carbon electrode (GNP/LC/GCE), which was fabricated by self‐assembling gold nanoparticles on the surface of L ‐cysteine (LC) modified glassy carbon electrode (GCE) via successive cyclic voltammetry (CV). A pair of well‐defined redox peaks of DA on the GNP/LC/GCE was obtained at E_pa=0.197 V and E_pc=0.146 V, respectively. And the peak separation between DA and AA is about 0.2 V, which is enough for simultaneous determination of DA and AA. The peak currents of DA and AA were proportional with their concentrations in the range of 6.0×10^?8–8.5×10^?5 mol L^?1 and 1.0×10^?6–2.5×10^?3 mol L^?1, with the detection limit of 2.0×10^?8 mol L^?1 and 3.0×10^?7 mol L^?1 (S/N=3), respectively. The modified electrode exhibits an excellent reproducibility, sensibility and stability for simultaneous determination of DA and AA in human serum with satisfactory result.     

Sensitive electrochemical determination of Sudan II in food samples using a poly(aminosulfonic acid) modified glassy carbon electrode

In this paper, a novel poly(aminosulfonic acid) modified glassy carbon electrode (PASA/GCE) for the determination of Sudan II was fabricated through electrochemical polymerizat ion. The electrochemical behavior of Sudan II at the modified electrode was studied by cyclic voltammetry. Results show that the modified electrode exhibits excellent electrocatalytic activity toward the electrochemical redox reaction of Sudan II. Under optimal experimental conditions, the oxidation peak current is linearly proportional to the concentration of Sudan II in the ranges of 4.0 × 10^?8 to 1.0 × 10^?6 mol L^?1 and 1.0 × 10^?6 to 1.2 × 10^?5 mol L^?1. The linear regression equations are i _pa(A) = 2.87c + 3.74 × 10^?6, r = 0.9977 and i _pa(A) = 0.78c + 6.11 × 10^?6, r = 0.9982, respectively, and the detection limit is 4.0 × 10^?9 mol L^?1. The novel method shows good recovery, reproducibility and sensitivity for the voltammetric determination of Sudan II in food samples.     

Kinetic Spectrophotometric Determination of Thiols and Ascorbic Acid

Abstract

This paper describes a kinetic spectrophotometric method for the determination of L‐ascorbic acid (AA) and thiols (RSH). Absorbance of Fe(II)‐phen complex formed during the reaction of AA or RSH with Fe(III)‐phen was continuously measured at 510 nm by double‐beam spectrophotometer with flow cell. For determination some thiols, the catalytic effect of Cu²⁺ ions was used. AA and RSH can be determined in concentration ranges from 4.0×10^?6 to 4.0×10^?5 M and from 8.0×10^?6 to 8.0×10^?5 M, respectively. The applicability of the proposed method was demonstrated by determination of chosen compounds in pharmaceutical dosage forms.     

Development and application of the tartrazine voltammetric sensors based on molecularly imprinted polymers

A modified glassy carbon electrode was prepared as an electrochemical voltammetric sensor based on molecularly imprinted polymer film for tartrazine (TT) detection. The sensitive film was prepared by copolymerization of tartrazine and acrylamide on the carbon nanotube-modified glassy carbon electrode. The performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy in detail. Under the optimum conditions, two dynamic linear ranges of 8?×?10^?8 to 1?×?10^?6?mol?L^?1 and 1?×?10^?6 to 1?×?10^?5?mol?L^?1 were obtained, with a detection limit of 2.74?×?10^?8?mol?L^?1(S/N?=?3). This sensor was used successfully for tartrazine determination in beverages.     

Application of Dipon, (1,4,8,11-Tetraazacyclotetradecane-4,11-bis(methylphosphonic acid) as Selective Complexing Agent for Determination of Copper(II)

A new macrocyclic ligand, 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid)(dipon), is selective complexing agent for copper(II) over other transition metal ions. The ligand was tested for analytical applications of copper(II) determination. Spectrophotometric determination under optimal experimental conditions (?log [H⁺]= 5.5, c _L≈ 5 × 10^?4 mol L^?1, λ= 310 nm) is valid in dynamic range (5–200)× 10^?6 mol L^?1 with detection limit 2.2 × 10^?6 mol L^?1, i.e. 0.14 μg ml^?1. Volumetric determination of copper(II) with standardized dipon solution was used for copper(II) determination at micromolar concentration level without any necessity to sequester interfering metal ions. A sharp end point of titration was detected by UV/VIS spectrophotometry. Both methods were tested on artificial and real samples (spiked mineral water, alloys) and gave satisfactory results without any systematic error. The advantage of both methods is their simplicity, rapidity and no sensitivity to the presence of other metal ions.     

Synthesis,characterization, and DNA damaging of bivalent metal complexes incorporating tetradentate dinitrogen–dioxygen ligand as potential biocidal agents

A new symmetrical tetradentate Schiff base was prepared by the condensation of 5-nitro-o-vanillin and diaminoethane. Its complexes were synthesized and characterized by elemental analysis, magnetic moment, molar conductance, UV-Vis, IR, ¹H NMR, ESI-mass, and EPR spectra. The DNA-binding behavior of these complexes was investigated by absorption spectra, cyclic voltammetry, and viscosity measurements. The DNA-binding constants for Co(II), Ni(II), Cu(II), and Zn(II) complexes were 1.58?×?10⁴, 1.65?×?10⁴, 2.71?×?10⁴, and 1.83?×?10⁴ (mol?L^?1)^?1, respectively. The results suggest that the complexes intercalate between DNA base pairs. Further, all these complexes exhibit moderate to high ability to cleave pUC19 DNA. The ligand and its complexes have been screened for antimicrobial activities using the disc diffusion method against selected bacteria and fungi. Antibacterial activity was greater against Gram-positive than Gram-negative bacteria for Cu(II) complex and antifungal activity was greater against Aspergillus niger and Candida albicans for the Cu(II) complex.     

Kinetic Studies on the Reaction of Sodium Hexacyanoferrate（ll） Complex with Peroxydisulfate Anion

The oxidation of Na₄Fe(CN)₆ complex by S₂O anion was found to follow an outer‐sphere electron transfer mechanism. We firstly carried out the reaction at pH=1. The specific rate constants of the reaction, k_ox, are (8.1±0.07)×10^?2 and (4.3±0.1)×10^?2 mol^?1·L·s^?1 at μ=1.0 mol·L^?1 NaClO₄, T=298 K for pH=1 (0.1 mol·L^?1 HCl0₄) and 8, respectively. The activation parameters, obtained by measuring the rate constants of oxidation 283–303 K, were ΔH^≠=(69.0±5.6) kJ·mol^?1, ΔS^≠=(?0.34±0.041)×10² J·mol^?1·K^?1 at pH=l and ΔH^≠=(41.3±5.5) kJ·mol^?1, ΔS^≠=(?1.27±0.33)×10² J·mol^?1·K^?1 at pH=8, respectively. The cyclic voltammetry of Fe(CN) shows that the oxidation is a one‐electron reversible redox process with E_1/2 values of 0.55 and 0.46 V vs. normal hydrogen electrode at μ=1.0 mol·L^?1 LiClO₄, for pH=1 and pH=8 (Tris). respectively. The kinetic results were discussed on the basis of Marcus theory.     

Synthesis,characterization, DNA-binding,and antioxidant activities of four copper(II) complexes containing N-(3-hydroxybenzyl)-amino amide ligands

Four new substituted amino acid ligands, N-(3-hydroxybenzyl)-glycine acid (HL₁), N-(3-hydroxybenzyl)-alanine acid (HL₂), N-(3-hydroxybenzyl)-phenylalanine acid (HL₃), and N-(3-hydroxybenzyl)-leucine acid (HL₄), were synthesized and characterized on the basis of ¹H NMR, IR, ESI-MS, and elemental analyses. The crystal structures of their copper(II) complexes [Cu(L₁)₂]·2H₂O (1), [Cu(L₂)₂(H₂O)] (2), [Cu(L₃)₂(CH₃OH)] (3), and [Cu(L₄)₂(H₂O)]·H₂O (4) were determined by X-ray diffraction analysis. The ligands coordinate with copper(II) through secondary amine and carboxylate in all complexes. In 2, 3, and 4, additional water or methanol coordinates, completing a distorted tetragonal pyramidal coordination geometry around copper. Fluorescence titration spectra, electronic absorption titration spectra, and EB displacement indicate that all the complexes bind to CT-DNA. Intrinsic binding constants of the copper(II) complexes with CT-DNA are 1.32?×?10^6?M^?1, 4.32?×?10^5?M^?1, 5.00?×?10^5?M^?1, and 5.70?×?10^4?M^?1 for 1, 2, 3, and 4, respectively. Antioxidant activities of the compounds have been investigated by spectrophotometric measurements. The results show that the Cu(II) complexes have similar superoxide dismutase activity to that of native Cu, Zn-SOD.     

Chemometric Strategies to Develop a Nanocomposite Electrode for Simultaneous Determination of Ascorbic Acid,Dopamine, and Uric Acid

A simple and sensitive method for simultaneously measuring dopamine (DA), ascorbic acid (AA), and uric acid (UA) using a poly(1‐aminoanthracene) and carbon nanotubes nanocomposite electrode is presented. The experimental parameters for composite film synthesis as well as the variables related to simultaneous determination of DA, AA, and UA were optimized at the same time using fractional factorial and Doehlert designs. The use of carbon nanotubes and poly(1‐aminoanthracene) in association with a cathodic pretreatment led to three well‐defined oxidation peaks at potentials around ?0.039, 0.180 and 0.351 V (vs. Ag/AgCl) for AA, DA, and UA, respectively. Using differential pulse voltammetry, calibration curves for AA, DA, and UA were obtained over the range of 0.16–3.12×10^?3 mol L^?1, 3.54–136×10^?6 mol L^?1, and 0.76–2.92×10^?3 mol L^?1, with detection limits of 3.95×10^?5 mol L^?1, 2.90×10^?7 mol L^?1, and 4.22×10^?5 mol L^?1, respectively. The proposed method was successfully applied to determine DA, AA, and UA in biological samples with good results.     

Effect of Pulse Width of Square Potential to Remove Silver Interference in the Determination of Mercury(II)

A graphite electrode modified with silver (Ag‐CPE) has been applied to detect mercury(II) using differential pulse voltammetry (DPV). Under optimized conditions, the calibration curve is linear in the range from 5.0×10^?8 mol L^?1 to 1.0×10^?4 mol L^?1 of mercury(II). The detection limit was found to be 3.38×10^?8 mol L^?1 with a relative standard deviation (RSD) of 2.25 % (n=8). The proposed method was successfully applied for the detection of mercury(II) in leachate samples. The Ag‐CP composites were characterized using X‐ray diffraction (XRD), BET adsorption analysis and scanning electron microscopy (SEM).     

Preparation of Cobalt Oxide Nanoclusters/Overoxidized Polypyrrole Composite Film Modified Electrode and Its Application in Nonenzymatic Glucose Sensing

A cobalt oxide nanocluster/overoxidized polypyrrole composite film electrochemical sensing interface was fabricated by two step electrochemical method. The electrochemical properties and electrocatalytic activity of the resulting modified electrode were also studied carefully. The results showed that this modified electrode exhibited good stability, good anti‐interference ability, as well as high electrocatalytic activity to the oxidation of glucose. The linear range for the amperometric determination of glucose was 2.0×10^?7–2.4×10^?4 mol L^?1 and 2.4×10^?4–1.4×10^?3 mol L^?1 with a detection limit of 5.0×10^?8 mol L^?1 (S/N=3), respectively. The sensitivity was 1024 µA mM^?1 cm^?2.     

Synthesis,characterization and DNA interaction studies of a new platinum(II) complex containing caffeine and histidine ligands using instrumental and computational methods

A new Pt(II) complex, [Pt(Caff)(His)(Cl)] (Caff is Caffeine (3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione) and His is l-Histidine), was synthesized and characterized using different physicochemical methods. The interaction of this complex with calf thymus DNA (ct-DNA) was investigated by absorption, emission, circular dichroism (CD), and viscosity measurements and molecular docking techniques. The calculated binding constant, K_b, was 5.3 × 10³ M^?1. In fluorimetric studies, the enthalpy and entropy of the reaction between the complex and ct-DNA showed that the reaction is exothermic (?H = ?184.07 kJ mol^?1, ?S = ?551.97 J mol^?1 K^?1). CD spectra of DNA in the presence of different amounts of the complex showed little changes in both the negative and positive band intensities, which imply a non-intercalative mode between the DNA and the platinum complex. Furthermore, the study of molecular docking also indicated that the complex binds to DNA via a groove binding mode.     

Determination of ferulic acid in Chinese proprietary medicine based on a poly-glutamic acid film sensor

The poly-glutamic acid modified electrode has been prepared by direct electro-polymerization of D-glutamic acid on the surface of glassy carbon electrode. In pH 4.2, 0.1 mol L^?1 HAc-NaAc buffer solution, the film modified electrode exhibited remarkable enhancement effect to the electrochemical responses of ferulic acid. The action mechanism was preliminarily explored. In the range of 2.0 × 10^?7 to 1.0 × 10^?5 mol L^?1, and 1.0 × 10^?5 to 3.0 × 10^?4 mol L^?1, the oxidation peak current has a linear relationship to the concentration, and the detection limit was estimated to be 7.0 × 10^?8 mol L^?1. This method has been adopted to detect trace amount of ferulic acid in Chinese proprietary medicine, and the recovery was from 97.8 to 102.4%.     

Construction and Validation of New Electrochemical Carbon Nanotubes Sensors for Determination of Acebutolol Hydrochloride in Pharmaceuticals and Biological Fluids

A simple, rapid and a highly selective method for direct electrochemical determination of acebutolol hydrochloride (AC) was developed. The developed method was based on the construction of three types of sensors conventional polymer (I), carbon paste (II) and modified carbon nanotubes (MCNTs) carbon paste (III). The fabricated sensors depend mainly on the incorporation of acebutolol hydrochloride with phosphotungstic acid (PTA) forming ion exchange acebutolol‐phosphotungstate (AC‐PT). The performance characteristics of the proposed sensors were studied. The sensors exhibited Nernstian responses (55.6 ± 0.5, 57.14 ± 0.2 and 58.6 ± 0.4 mV mol L^?1) at 25 °C over drug concentration ranges (1.0 × 10^?6‐1.0 × 10^?2, 1.0 × 10^?7‐1.0 × 10^?2 and 5.0 × 10^?8‐1.0 × 10^?2 mol L^?1 with lower detection limits of (5.0 × 10^?7, 5.0 × 10^?8 and 2.5 × 10^?8 mol L^?1 for sensors (I), (II) and (III), respectively. The influence of common and possible interfering species, pharmaceutical additives and some related pharmacological action drugs was investigated using separate solution method and no interference was found. The stability indicating using forced degradation of acebutolol hydrochloride was studied. The standard addition method was used for determination of the investigated drug in its pharmaceutical dosage forms and biological fluids. The results were validated and statistically analysed and compared with those from previously reported methods.     

KINETICS OF FORMATION AND STABILITY CONSTANTS OF MONO AND BIS l-TYROSINE COMPLEXES OF Cu(II), Co(II), AND Ni(II)

Abstract

The kinetics and stability constants of l-tyrosine complexation with copper(II), cobalt(II) and nickel(II) have been studied in aqueous solution at 25° and ionic strength 0.1 M. The reactions are of the type M(HL)^(3-n)+ _n-1 + HL- ? M(HL)^(2-n)+_n(k_n, forward rate constant; k_-n, reverse rate constant); where M=Cu, Co or Ni, HL^? refers to the anionic form of the ligand in which the hydroxyl group is protonated, and n=1 or 2. The stability constants (K_n=k_n/k_-n) of the mono and bis complexes of Cu²⁺, Co²⁺ and Ni²⁺ with l-tyrosine, determined by potentiometric pH titration are: Cu²⁺, log K₁=7.90 ± 0.02, log K₂=7.27 ± 0.03; Co²⁺, log K₁=4.05 ± 0.02, log K₂=3.78 ± 0.04; Ni²⁺, log K₁=5.14 ± 0.02, log K₂=4.41 ± 0.01. Kinetic measurements were made using the temperature-jump relaxation technique. The rate constants are: Cu²⁺, k₁=(1.1 ± 0.1) × 10⁹ M ^?1 sec^?1, k_-1=(14 ± 3) sec^?1, k₂=(3.1 ± 0.6) × 10⁸ M ^?1 sec^?1, k^?2=(16 ± 4) sec^?1; Co²⁺, k₁=(1.3 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-1=(1.1 ± 0.2) × 10² sec^?1, k₂=(1.5 ± 0.2) × 10⁶ M ^?1 sec^?1, k_-2=(2.5 ± 0.6) × 10² sec^?1; Ni²⁺, k₁=(1.4 ± 0.2) × 10⁴ M ^?1 sec^?1, k_-1=(0.10 ± 0.02) sec^?1, k₂=(2.4 ± 0.3) × 10⁴ M ^?1 sec^?1, k_-2=(0.94 ± 0.17) sec^?1. It is concluded that l-tyrosine substitution reactions are normal. The presence of the phenyl hydroxyl group in l-tyrosine has no primary detectable influence on the forward rate constant, while its influence on the reverse rate constant is partially attributed to substituent effects on the basicity of the amine terminus.